Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 8

Products

Frame

Shop Street Rod Chassis & Frame At Speedway Motors

Start your street rod project right here at Speeway Motors with a wide variety of hot rod chassis & frames. Everything you need is available, from frame assemblies and chassis notching tools to sound proof insulation by Dynamat and Hushmat. Make sure your street rod project starts on the right track with reproduction frame rails, crossmembers, and motor mounts right here at Speedway Motors!

Featured Products
  • 1928-1929 Ford Model A Steel Running Boards
    1928-1929 Ford Model A Steel Running Boards
    (Part #103A185ASS)
    x
                These 1928-1929 Model A runnings boards are complete with rubber mat and stainless trim.
            
  • Universal Adjustable Frame Rail Bracket
    New
    Universal Adjustable Frame Rail Bracket
    (Part #91007211)
    x
                This slick little universal adjustable frame rail bracket fits inside your un-boxed frame rail to mount just about anything you can think of. It works especially well for a steering shaft support heim and has a specially sized and angled slot just for that purpose. It's  also no coincidence that the pre-drilled bolt holes also line up with  most popular electric fuel pumps and fuel filter brackets.
    • Plain mild steel
    • Includes all necessary hardware for bracket installation
    • Support heim not included
  • 1932 Ford Reproduction Frame Rails
    1932 Ford Reproduction Frame Rails
    (Part #91657007)
    x
                

    Speedway's 1932 Ford reproduction frame rails are the perfect foundation for your Deuce project. These one-piece, 11-gauge steel stampings are made to original specifications and show a fine attention to detail. Even the original bead is stamped into the rail.

    • All mounting holes on the top are drilled
    • On the sides, only the spreader bar holes are drilled
    • Fits every 1932 Ford model - rails are same for roadster, coupe, sedan, & pickup
    • Built exactly to the original '32 Ford specifications
      • Works perfectly with all original '32 parts
      • Also fits any parts that follow the original specifications

    916-57007 Instructions (PDF)

  • 1932 Ford Rear Frame Horn Covers, Fiberglass Replacement
    1932 Ford Rear Frame Horn Covers, Fiberglass Replacement
    (Part #9003228)
    x
                

    These covers are produced here in our Speedway Fiberglass plant and average approximately 1/8” thick on the flatter surfaces and thicker in the corners on the inside.

    • Fiberglass
    • 1932 Ford
    • Cover rear frame horn
    • Specify LH(left) or RH(right) side
  • 1932 Ford Straight Front Spreader Bar, Polished Stainless
    1932 Ford Straight Front Spreader Bar, Polished Stainless
    (Part #91657017)
    x
                

    This stainless steel spreader bar fits between the front frame rail horns on a 1932 Ford, lending strength and rigidity to the extreme ends of the frame. Straight 1-1/2" O.D. tubular polished stainless steel front cross bar measures 23-1/4" long.

  • Stamped 2 Inch Dropped Crossmember, 1928-1931 Model A Ford
    New
    Stamped 2 Inch Dropped Crossmember, 1928-1931 Model A Ford
    (Part #91657010)
    x
                

    These stamped 1928-31 Model 'A' Ford front crossmembers lower your chassis 2" below a stock crossmember.  They are designed to replace cracked originals or can be used to start your reproduction frame off right. Made of heavy steel with clearance for cross spring. Welds to frame boxing plates of original or repro chassis.

    • Steel Construction
    • Powder Coated Finish
    • For 1928-31 Model A Ford
    • 2 Inch lower than stock ride height
    • Sold Individually

     

  • All-In-One Accessory Clamps
    $14.99
    All-In-One Accessory Clamps
    (Part #91032866)
    x
                

    These billet aluminum clamps are great for mounting and adjusting hood pins. The accessory bracket and 3.5" hose clamps can be added for holding power steering and radiator reservoir tanks.

    Available for 1”, 1.25”, 1.375”, or 1.50” tube sizes. Clamp is drilled and tapped ½” – 20 in the center, and 10-32 on the outsides.

    Hood pins and brackets sold separately.

  • Model A Frame Assembly
    $2,299.99
    Product Rating: 5.00 Stars
    Model A Frame Assembly
    (Part #91657045)
    x
                

    Speedway Motors makes it easy for you to get your car rolling with our Model A frame assembly. This frame is engineered to accept our radius rod front axle and 4-bar rear suspension kits.

    • Fabricated frame rails
    • 1932 Ford front crossmember
    • Front shock mounts
    • Vega steering box mount
    • Front radius rod mounts
    • Hood hold down brackets
    • Manual brake pedal
    • Master cylinder mount
    • S/B Chevy motor mounts
    • TH350 transmission mount
    • Rear 4-bar mounts
    • Rear coil-over mounts
    • Rear panhard bar mount
    • Welded-in mounting nuts

     

    Truck Freight Shipping Charges Apply - click here for details

Filter

"Street Rod, Frame" Page 1 of 8

Page 1 of 8

  • 1928-31 Model A Front Crossmember
    1928-31 Model A Front Crossmember
    (Part #91657011)
    x
                

    These replacement 1928-31 Model 'A' Ford front crossmembers lower a Model A chassis 2" below a stock crossmember. Replaces a cracked original or use it to start your reproduction frame off right. Made of heavy, 7-gauge steel with clearance for 1-3/4" cross spring. Welds to frame boxing plates of original or repro chassis.

  • Universal Expanding Body Mounts
    Universal Expanding Body Mounts
    (Part #715BM401)
    x
                

    If you are building a lightweight car like a "T" or an "A", mounting the body may present a problem. These neat expanding rubber universal body mounts allow you to drill a 3/4" hole in the top of the frame, insert a 3/8" coarse bolt, tighten, then the body is mounted.

    Not recommended for cars newer than 1934.

  • DEi 010393 Reflect-A-GOLD Heat Reflective Tape, 24 x 24 Inch Sheet
    DEi 010393 Reflect-A-GOLD Heat Reflective Tape, 24 x 24 Inch Sheet
    (Part #35610393)
    x
                Reflect-A-GOLD is a metalized polyamide  polymer laminated glass cloth with a high temperature pressure sensitive  adhesive for use in extreme temperature swing environments. It is  lightweight and easy to apply and remove. 

    Highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms – anything or area that needs protection from heat.

    • For firewalls, bulkheads, engine covers, floors, seat bottoms & more
    • Capable of handling continual temperatures up to 850°F
    • Resists UV degradation for long-term performance
    • Virtually NO clearance needed
    • Adhesive protected by a release liner rated up to 325°F
    • Light weight and flexible-Trim to size
    • Space age polymer material
    • Reflects up to 850°F! Reflecting 80% of heat!
    • Ultra light weight and self adhesive
  • 1932 Ford Frame Center Boxing Plates
    1932 Ford Frame Center Boxing Plates
    (Part #91657056)
    x
                Our center boxing plate  pairs are left long to allow for inconsistencies in  original or new frame rails. Made of 10 gauge steel. Welding/fitting  required.
            
  • 1932 Ford Straight Front Spreader Bar, Chrome
    1932 Ford Straight Front Spreader Bar, Chrome
    (Part #91657018)
    x
                

    This spreader bar fits between the front frame rail horns on a 1932 Ford, lending strength and rigidity to the extreme ends of the frame. Chrome plated straight 1-1/2" O.D. tubular steel front cross bar measures 23-1/4" long.                    

  • Rubber GM Transmission Cushion
    Rubber GM Transmission Cushion
    (Part #91018016)
    x
                

    OEM-style rubber transmission cushion for many '58-'82 GM transmissions including TH350 auto, Muncie, Saginaw, and others.

    • Meets or exceeds OEM specifications 
    • Rubber formulation provides abrasion resistance and aging stability
    • Tough, hardened steel plate & inserts
    • Chemlock® bonding agent ensures superior rubber-to-metal bond
  • 1933-1934 Ford Front Frame Boxing Plates
    1933-1934 Ford Front Frame Boxing Plates
    (Part #91054422)
    x
                

    When using original or reproduction frame rails, be sure to fully box the front section for strength and saftey. Our front boxing plates are designed to box the frame in critical front suspension attachment points and motor mount areas. 

    10 gauge

     

  • Weld-On U Bolt Plates
    $45.99
    Product Rating: 5.00 Stars
    Weld-On U Bolt Plates
    (Part #9161002)
    x
                

    This kit will clean up the appearance of your front crossmember. It has two plates that weld to the crossmember, and another plate that holds the spring from the underside, eliminating the need to have the U-bolts come up over the top of the crossmember.

  • TH350 Transmission Cushion Mount-Polyurethane
    TH350 Transmission Cushion Mount-Polyurethane
    (Part #91025820)
    x
                

    Heavy duty Turbo 350 polyurethane replacement for original GM mounts. Features a built-in safety lock to prevent separation. For race or street race use.

    Fits "most" GM transmissions having a mount on the tailshaft. The bolt spacing for the tranny mount will accomodate 3-3/4" to 4-1/4" bolt pattern on the transmission. For TH350 application.

  • 1935-1940 Ford Front Frame Boxing Plates
    1935-1940 Ford Front Frame Boxing Plates
    (Part #91054443)
    x
                

    When using original or reproduction frame rails, be sure to fully box the front section for strength and saftey. Our front boxing plates are designed to box the frame in critical front suspension attachment points and motor mount areas.

    10 gauge.

  • Stamped 2 Inch Dropped Crossmember, 1928-1931 Model A Ford
    New
    Stamped 2 Inch Dropped Crossmember, 1928-1931 Model A Ford
    (Part #91657010)
    x
                

    These stamped 1928-31 Model 'A' Ford front crossmembers lower your chassis 2" below a stock crossmember.  They are designed to replace cracked originals or can be used to start your reproduction frame off right. Made of heavy steel with clearance for cross spring. Welds to frame boxing plates of original or repro chassis.

    • Steel Construction
    • Powder Coated Finish
    • For 1928-31 Model A Ford
    • 2 Inch lower than stock ride height
    • Sold Individually

     

  • Speedway 1949-1954 Chevy Speedway Mustang II Deluxe Steel Crossmember
    Speedway 1949-1954 Chevy Speedway Mustang II Deluxe Steel Crossmember
    (Part #91034427)
    x
                

    These Speedway Mustang IFS kits for 1949-1954 Chevy passenger cars are natural conversions to improve your vehicle's suspension, handling, and overall performance. The Chevy models have frames and fenders which lend themselves nicely to the Mustang front end conversion, without changing the critical geometry.  Like our Ford kits, Chevy kits do not bumpsteer at all.  Included in these kits are illustrated installation instructions.

    • Mounting points of all control arms match the original Ford design
    • Factory anti-drive built right in
    • 1949-1954 Chevy car frames
    • All Speedway crossmembers come in Deluxe versions (welds ground)
    • Constructed of 7-gauge steel
    • Mustang II cross members using stock spindles will drop the stock ride height 3-4”
    • One-Piece Shock Cups are T.I.G. welded in place and have anti-dive built in.
    • Vertical Inner Uprights.  This is the strongest design available, with twice the weld area.  This will keep your frame from twisting!
    • Crossmember and Spring Towers precut and pre-welded to fit your frame
    • Lower control arm pivot tubes and gussets are NOT included
    • Works with both manual or power rack and pinions

    Choose from the crossmembers below and add to an IFS kit to get a

  • 1941-48 Ford Crossmember
    $104.99
    Product Rating: 3.33 Stars
    1941-48 Ford Crossmember
    (Part #91657104)
    x
                Lowers 1941-48's by 3 inches, with no other changes. Direct bolt-in. All mounting holes match original frame.

    This is a spring mount crossmember for a 2" spring. It is 29-1/4" wide, end to end, or 27-5/8" wide, hole to hole.

    Warning: This crossmember does not work with a Ford Flathead Motor - there is no place for original motor mounts.

  • Traditional T Frame - Steering Box Options
    Traditional T Frame - Steering Box Options
    (Part #91691310)
    x
                Our traditional 1922-1925 T frame has an additonal 6" of kick-up in the rear and was designed to use our High-Arch leaf spring. Add our 6" drop radius rod front axle and you have a T in the weeds. We can also add front radius rod brackets and Vega box mount, but don't recommend our motor mount or rear suspension options on this frame.
            
  • 1933-1934 Ford Steel Firewall
    $319.99
    1933-1934 Ford Steel Firewall
    (Part #91134474)
    x
                Fits 1933-34 Ford passenger cars. A  perfect replacement for your missing, butchered up, or hole-filled original. Bare steel. 

    This firewall has a 3/4" flange on the sides and top under the cowl area. This is a smoothie firewall and not the OEM replacement that had large rolled beads in a V pattern. The very upper section under the cowl has three small beads rolled into it horizontally.

    From the sides, towards the center 4-1/2" there is a corner at approximately 30 degrees and turns rearward 3". The flat area at rear of engine is 19" wide. This is not a completely recessed firewall, only in the area rear of the engine. Flange on sides and top are for plug welding in original location and further recessing would require additional fabrication.
  • Tubular Transmission Mount with 2 Inch Drop
    Tubular Transmission Mount with 2 Inch Drop
    (Part #91628903)
    x
                

    Universal rear transmission mounts and heavy duty tube crossmember. Fit most GM, Ford, and Mopar manual and auto transmissions. Black powder coated finish. Crossmember must be welded directly into frame or to 3 hole mounting flanges for bolt-in application. Fits frames up to 38" wide.

     

    Note: May require re-drilling of the mount holes when used with Ford C4/C6 trans cushion 910-18017.

  • 1932 Ford Highboy Fiberglass Rear Frame Covers, Speedway Body
    1932 Ford Highboy Fiberglass Rear Frame Covers, Speedway Body
    (Part #9003251)
    x
                

    1932 Ford "Highboy" fiberglass rear frame covers for Speedway fiberglass bodies. Features a glossy gelcoat finish that is ready for paint preparations.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery.

  • All-In-One Accessory Clamps
    $14.99
    All-In-One Accessory Clamps
    (Part #91032866)
    x
                

    These billet aluminum clamps are great for mounting and adjusting hood pins. The accessory bracket and 3.5" hose clamps can be added for holding power steering and radiator reservoir tanks.

    Available for 1”, 1.25”, 1.375”, or 1.50” tube sizes. Clamp is drilled and tapped ½” – 20 in the center, and 10-32 on the outsides.

    Hood pins and brackets sold separately.

  • Speedway 1935-40 Ford Bolt-In Rear Frame Cross Support
    Speedway 1935-40 Ford Bolt-In Rear Frame Cross Support
    (Part #91083540)
    x
                

    Bolt in channeled rear support and gussets for '35-'40 Ford cars. It includes a crossmember and the bolts to attach it.

    910-83540 Instructions (PDF)

  • Tubular Transmission Mount with 6 Inch Drop
    Tubular Transmission Mount with 6 Inch Drop
    (Part #91628905)
    x
                

    Universal rear transmission mounts and heavy duty tube crossmember. Fit most GM, Ford, and Mopar manual and auto transmissions. Black powder coated finish. Crossmember must be welded directly into frame or to 3 hole mounting flanges for bolt-in application. Fits frames up to 38" wide.

     

    Note: May require re-drilling of the mount holes when used with Ford C4/C6 trans cushion 910-18017.

Goto Previous PagePrevious Page
1 2 3 4 5 ... 8