Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 18

Products

Fasteners and Hardware

Shop Streed Rod Fasteners & Hardware At Speedway Motors

Want your hot rod to look cool at the show and hot on the street? Speedway Motors has you covered! Whether you’re building a low-buck rat rod roadster, Deuce coupe or fat-fendered sedan, Speedway has thousands of street rod parts, chassis, frames, aluminum radiators, crate engines, accessories, and a variety of professionally engineered street rod kits in stock, ready to ship. Best of all, Speedway's friendly and knowledgeable Techs can help you get the performance hot rod parts you need to get your GM, Chevy, Mopar or Ford car on the road and looking its best.

Featured Products
  • Goodridge SS902-07 Stat-O-Seal Sealing Washer, -4 AN
    Goodridge SS902-07 Stat-O-Seal Sealing Washer, -4 AN
    (Part #6179061)
    x
                

    Goodridge Stat-O-Seals are the best sealing washers available. Synthetic rubber O-ring bonded to an aluminum crush washer. Provides the advantages of an O-ring seal, but with the ease of fittings. Will withstand temperatures from -85°F to 450°F.

    AN Fitting Thread Chart (GIF)

  • Painless 70902 1/2 Inch Powerbraid Split Braided Sleeving, 10 Foot
    Painless 70902 1/2 Inch Powerbraid Split Braided Sleeving, 10 Foot
    (Part #91070902)
    x
                

    This PowerBraid from Painless Performance is very flexible. Its 25% overlap gives it optimum wire protection without the need for any additional fasteners.

    • Cut and Abrasion Resistant
    • Continuous Temperature Rating -94 Degrees to 257 Degrees F
    • Melting Point 482 Degrees F
    • Made in the USA
  • Stainless Steel Headlight Conduit Set, 12 Inch
    Stainless Steel Headlight Conduit Set, 12 Inch
    (Part #91131401)
    x
                Finish off your headlight wiring with these attractive and affordable polished stainless steel lengths of conduit. Conduit can be used to hide and protect fragile headlight, taillight or horn wires that are exposed to the elements. Two-piece set includes polished stainless ferrules to secure the conduit. Conduit measures 12" long with 3/8" I.D.
            
  • Aluminum Oval Head Quarter Turn Fasteners, .500 Inch Grip, Pack/10
    Aluminum Oval Head Quarter Turn Fasteners, .500 Inch Grip, Pack/10
    (Part #91007151)
    x
                

    These panel fasteners quickly fasten body panels, doors, tilt fronts and hood panels.

    Use .500" grip range for thin materials, use .550" for mid-materials, and .600" and up for thick materials.

    Measurement Guide (Link)

  • Tru Rivets, 3/16 Inch Large Head
    From: $9.99
    Product Rating: 4.53 Stars
    Tru Rivets, 3/16 Inch Large Head
    (Part #91004)
    x
                Large head 3/16" aluminum pop rivets with steel shank. 1/4" to 3/8" grip range. Available in red, white, pepsi (light) blue, chevron blue, yellow, black, and orange. Box of 250.
            
  • Steel Weld Bung for 1 Inch I.D. Tube, 11/16-18 RH
    Steel Weld Bung for 1 Inch I.D. Tube, 11/16-18 RH
    (Part #91002969)
    x
                

    Heavy duty steel weld bungs for splitting wishbones, custom tie rods or custom suspension control arms. These weld bungs are 1” O.D. where they slide into the steel 1" I.D. tubing.

  • Painless 70959 3/4 Inch ClassicBraid Wire Sleeving, 6 Feet
    Painless 70959 3/4 Inch ClassicBraid Wire Sleeving, 6 Feet
    (Part #91070959)
    x
                

    This 3/4" ClassicBraid from Painless Performance has a smooth new look that will transform your engine and give you that factory installed look. Its woven construction gives you excellent blockage against mud and dirt while giving you adequate drainage for optimum wiring protection.

    • Made in the USA
    • Continuous Temperature Rating -94° to 257°F
    • Melting Point 482°F
    • Resistant to Automotive Chemicals & Fluids
    • Great For Auto, Marine, RV, Aircraft, Power Sports, & More
    • 6' Long
  • Goodridge SS902-09 Stat-O-Seal Sealing Washers, -6 AN
    Goodridge SS902-09 Stat-O-Seal Sealing Washers, -6 AN
    (Part #6179062)
    x
                

    Goodridge Stat-O-Seals are the best sealing washers available. Synthetic rubber O-ring bonded to an aluminum crush washer. Provides the advantages of an O-ring seal, but with the ease of fittings. Will withstand temperatures from -85°F to 450°F.

    AN Fitting Thread Chart (GIF)

Filter

"Street Rod, Fasteners and Hardware" Page 1 of 18

Page 1 of 18

  • 1949-53 Flathead Stainless Steel Spark Plug Wire Looms
    1949-53 Flathead Stainless Steel Spark Plug Wire Looms
    (Part #91612002)
    x
                

    Polished stainless steel tubes accommodate wires up to 7 mm. Attaches to intake manifold of 1949-1953 flathead Ford V8's. Will not work with oil fill/vent tube on '49-'53 engines without modification (may use '48-older vent/fill which was part of the fuel pump stand).

  • CON2R 7-002 Chrome Wing Nut, 1/4-20 Thread, 2-1/4 Across, 1-1/2 Tall
    CON2R 7-002 Chrome Wing Nut, 1/4-20 Thread, 2-1/4 Across, 1-1/2 Tall
    (Part #910322)
    x
                

    This wing nut is for-sure an attention getter. Perfect topper for the air cleaner on a big four barrel, on top of your tri-power pots or an accent piece wherever you need it.

  • Stainless Steel Nylock Nut Kit, Fine Thread
    Stainless Steel Nylock Nut Kit, Fine Thread
    (Part #94004176)
    x
                We now offer a full height self locking stainless steel nuts in fine thread in a plastic divider case with 25 (1/4") 20 (5/16") 20 (3/8") 15 (7/16") and 12 (1/2") nuts.
            
  • Zip Tie Wraps, Stainless Steel Tooth, Black, 100 per Bag
    Zip Tie Wraps, Stainless Steel Tooth, Black, 100 per Bag
    (Part #940048)
    x
                

    These zip ties are made in the U.S.A. and feature a stainless steel securing tooth. They come 100 to a package and are perfect for securing loose wiring and hoses or can help serve as temporary fixes to many odd jobs and projects.

    • Stainless Tooth Tie Wraps feature super strong self-locking, stainless steel tooth, one piece design, standard size head.
    • Black Tie Wraps are UV resistant. Recommended for outdoor usage.
    • Metal Detectable
    • Temperature Ratings 185 F / 85 C.
    • UL Flame Rating 94V-2.
    • Minimum installation temperature is greater than 32 F or 0 C.
    • Made From Nylon 6/6.
    • Choose from lengths of 4", 5.5", 7.3", and 11.4"
    • 100 per Bag
  • Mag Daddy 3/4 Inch Medium Cable Daddy Magnetic Wire Fasteners, 5-Pack
    Mag Daddy 3/4 Inch Medium Cable Daddy Magnetic Wire Fasteners, 5-Pack
    (Part #91033243)
    x
                These medium Mag Daddy™ fasteners are designed to hold up to 10  unshielded Cat 5 Cables.  Rated at 16 lbs., these black fasteners  feature a magnetic bond for easy installation and removal without the  use of screws, wires, or zip-ties.
    • Easy Installation
    • Plastic lasts 20x longer than Nylon 6.6
    • Rotates 360°
    • Reusable
    • Take wires in and out
    • Sold in sets of 5 

    Suggested locations for use: Steel, Beams, Purlins, Ceiling Decks, Drop Ceiling Channels, Metal Joists, Frame Rail, Screw Heads, Metal Washer, etc.

    91033243 Cable Daddy Information/Instructions (PDF) 

  • Quarter Turn Springs with Step, Pack/10
    Quarter Turn Springs with Step, Pack/10
    (Part #91007103)
    x
                

    Stepped quarter turn springs mount easily with pop rivets. The step is approximately 0.250". Overall height of spring is 0.400" to 0.425". Eye-to-eye measurement is 1-3/8".

    Measurement Guide (Link)

  • Speed Fast Stainless Safety Wire, .032 Inch
    Speed Fast Stainless Safety Wire, .032 Inch
    (Part #91089407)
    x
                Speed Fast 304 stainless steel safety wire. Sold in one pound rolls and comes with a handy belt clip.
            
  • 1/2 Inch-20 Fine Thread Nylock Half Nuts, 6 Pack
    1/2 Inch-20 Fine Thread Nylock Half Nuts, 6 Pack
    (Part #91005906)
    x
                

    1/2 Inch-20 Fine Thread Nylock Half Nuts.  Works with front drive pins (part numbers 91003996 and 91003900).

    • 1/2 Inch-20 Fine Thread
    • Package of six.
  • Quik-Latch Products QL-25-SP Mini Quick-Latch, Polished Aluminum
    Quik-Latch Products QL-25-SP Mini Quick-Latch, Polished Aluminum
    (Part #91007156)
    x
                

    These small latches can be used for multi-purpose quick release latching. Center release button stays in the down position until re-latched. Each latch body has a 1-1/4" O.D. and is supplied with one mounting stud, two threaded nuts, and two washers. Mounting cup (sold seperately) is used to mount the stud underneath the panel. Mounting cup can be easily riveted or bolted to the back side of any panel.

    • Diameter of Latch Body:  1.23"
    • Length of Latch Body:  0.57"
    • 1/4"-20 Thread
    • Length of Mounting Stud:  2.13"

    Works great for:

    • T-Bucket bed covers
    • Hood pins
    • Deck lids
    • Air cleaner stud
    • Removeable body panels
  • Mag Daddy 1/2 In Large Cable Daddy Magnetic Wire/Cable Fasteners
    Mag Daddy 1/2 In Large Cable Daddy Magnetic Wire/Cable Fasteners
    (Part #91062423)
    x
                Mag Daddy Cable-Daddy™ fasteners are designed to  easily secure all wires and cables in a variety of environments. These  magnetic fasteners adhere to most all metal surfaces with an absurd 23  lbs. of retention force! Mag Daddy Cable-Daddy™ fasteners are the best  solution to wire and cable management. They're offered in a choice of  three sizes to meet your requirements. Whether you need to hold a brake  line in place or quickly organize wires or cables, Mad Daddy Cable-Daddy™  fasteners are the perfect fix.
    • Black rectangular cable hold-down
    • 23 lbs. of retention force
    • Magnet base is 26mm x 11mm with a total height of 18.5mm
    • Holds up to 20 unshielded Cat 5 Cables
    • Easy Installation
    • Plastic lasts 20x longer than Nylon 6.6
    • Ability to Rotate 360°
    • Re-usability
    • Take in and out wires
    • Sold in packs of 5

    Locations: Steel, Beams, Purlins, Ceiling Decks, Drop Ceiling Channels, Metal Joists, Frame Rail, Screw Heads, Metal Washer, etc.

    91062423 Cable Daddy Information/Instructions (PDF)

  • Painless 70956 1/8 Inch ClassicBraid Wire Sleeving, 20 Feet
    Painless 70956 1/8 Inch ClassicBraid Wire Sleeving, 20 Feet
    (Part #91070956)
    x
                

    This ClassicBraid has a smooth texture and appearance that will transform your engine bay and give you that factory installed look. Its tight woven construction gives you an excellent blockade against mud and dirt while keeping adequate drainage for optimum wiring protection. 

    • Made in the USA
    • Continuous Temperature Rating -94° to 257°F
    • Melting Point 482°F
    • Resistant to Automotive Chemicals & Fluids
    • Great For Auto, Marine, RV, Aircraft, Power Sports, & More
    • 20' long
  • Tube Seal End, Red Anodized, -24 AN, 1-7/8 Inch I/D
    Tube Seal End, Red Anodized, -24 AN, 1-7/8 Inch I/D
    (Part #6172023)
    x
                Tube seal ends are designed for street applications. Connect stainless  hose to outlet with low pressure indicator (not exceeding 50 psi when  using AN hose size 4-12 and under 25 psi with sizes 16-32).
            
  • Aluminum Allen Pipe Plugs, 1/4 Inch NPT
    Aluminum Allen Pipe Plugs, 1/4 Inch NPT
    (Part #6176204)
    x
                

    Allen pipe plugs are precision machined to ensure precise thread engagement. These lightweight aluminum plug fittings are designed to match up with all performance hose and hose ends. Blue anodized finish.

    AN Thread Sizing Guide (GIF)

    Fitting Thread Application Chart (GIF)

  • 5/8 Inch or 16mm to AN6 Banjo Fitting for Power Steering Pump
    5/8 Inch or 16mm to AN6 Banjo Fitting for Power Steering Pump
    (Part #6174830)
    x
                

    Zinc-plated steel banjo bolt assembly for the pressure connection (outlet) to the pump.

    Fitting 617-4830 fits our:

    • P/S pump # 91032922-GM
    • P/S pump # 91032908-BLK  
    • P/S pump # 91032908-CHR

    WARNING:  Fitting is designed to accept an AN-6 stainless steel braided wire high-pressure hose.

  • Tube Seal End, Chrome, -20 AN, 1-5/8 Inch I/D
    Tube Seal End, Chrome, -20 AN, 1-5/8 Inch I/D
    (Part #6172222)
    x
                Tube seal ends are designed for street applications. Connect stainless  hose to outlet with low pressure indicator (not exceeding 50 psi when  using AN hose size 4-12 and under 25 psi with sizes 16-32).
            
  • Small Diameter Steel Jam Nuts, 5/8-18, Pack/6
    Small Diameter Steel Jam Nuts, 5/8-18, Pack/6
    (Part #1756048)
    x
                Steel fine thread jam nuts for use with rod ends, heim joints, and clevis. Each has a small 3/4" O.D. for added clearance. Sold in bags of six nuts. Available with left or right thread.
            
Goto Previous PagePrevious Page
1 2 3 4 5 ... 18