Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Streed Rod Fasteners & Hardware At Speedway Motors

Want your hot rod to look cool at the show and hot on the street? Speedway Motors has you covered! Whether you’re building a low-buck rat rod roadster, Deuce coupe or fat-fendered sedan, Speedway has thousands of street rod parts, chassis, frames, aluminum radiators, crate engines, accessories, and a variety of professionally engineered street rod kits in stock, ready to ship. Best of all, Speedway's friendly and knowledgeable Techs can help you get the performance hot rod parts you need to get your GM, Chevy, Mopar or Ford car on the road and looking its best.

Featured Products
Tru Rivets, 3/16 Inch Large Head
From: $9.99
Product Rating: 4.47 Stars
Tru Rivets, 3/16 Inch Large Head
x
            Large head 3/16" aluminum pop rivets with steel shank. 1/4" to 3/8" grip range. Available in red, white, pepsi (light) blue, chevron blue, yellow, black, and orange. Box of 250.
        
Plain Steel Sleeves for 5/8 Inch Rod Ends
Plain Steel Sleeves for 5/8 Inch Rod Ends
x
            

If you are building a hot rod just a little bit different than the next guy, you will probably need a special length tie rod or drag link sleeve. We stock many common and uncommon lengths along with custom, made-to-order lengths. Measurements are in assembled eye-to-eye lengths.

To order:

  1. Use guide below to measure your finished length.
  2. The part number and length you order will be 3" longer than the sleeve you receive. (I.E., if you order a 48" part number, you will receive a 45" long sleeve.) This is the difference in length required to give you the correct finished center-to-center measurement.
  3. All sleeves will have internal RH thread in one end and LH thread in the other.

Measuring Guide for Tie Rod/Drag Link (GIF)

Large Head 3/16 Inch Exploding Rivets
Large Head 3/16 Inch Exploding Rivets
x
            

Ok, they don’t really explode, but the back side splits into folds so you don’t normally need to use a back-up washer with them. They work great where it’s hard to reach the back side. Choose small or large head and the color of your choice. Plain, Black, White, Red, Orange, Yellow, Pepsi (light) Blue or Chevron (dark) Blue.

  • Box of 250
  • Large head is 5/8 O.D.
  • Aluminum pop rivet with aluminum shank

Color Chart (GIF)

Small Head 3/16 Inch Exploding Rivets
Small Head 3/16 Inch Exploding Rivets
x
            

Ok, they don’t really explode, but the back side splits into folds so you don’t normally need to use a back-up washer with them. They work great where it’s hard to reach the back side. Choose small or large head and the color of your choice. Plain, Black, White, Red, Orange, Yellow, Pepsi (light) Blue or Chevron (dark) Blue.

  • Box of 250
  • Small head is 3/8 O.D.
  • Aluminum pop rivet with aluminum shank

Color Chart (GIF)

"Street Rod, Fasteners and Hardware" Page 1 of 9

  • 1949-53 Flathead Stainless Steel Spark Plug Wire Looms
    1949-53 Flathead Stainless Steel Spark Plug Wire Looms
    x
                

    Polished stainless steel tubes accommodate wires up to 7 mm. Attaches to intake manifold of 1949-1953 flathead Ford V8's. Will not work with oil fill/vent tube on '49-'53 engines without modification (may use '48-older vent/fill which was part of the fuel pump stand).

  • CON2R 7-002 Chrome Wing Nut, 1/4-20 Thread, 2-1/4 Across, 1-1/2 Tall
    CON2R 7-002 Chrome Wing Nut, 1/4-20 Thread, 2-1/4 Across, 1-1/2 Tall
    x
                

    This wing nut is for-sure an attention getter. Perfect topper for the air cleaner on a big four barrel, on top of your tri-power pots or an accent piece wherever you need it.

  • Stainless Steel Nylock Nut Kit, Fine Thread
    Stainless Steel Nylock Nut Kit, Fine Thread
    x
                We now offer a full height self locking stainless steel nuts in fine thread in a plastic divider case with 25 (1/4") 20 (5/16") 20 (3/8") 15 (7/16") and 12 (1/2") nuts.
            
  • Zip Tie Wraps, Stainless Steel Tooth, Black, 100 per Bag
    Zip Tie Wraps, Stainless Steel Tooth, Black, 100 per Bag
    x
                

    These zip ties are made in the U.S.A. and feature a stainless steel securing tooth. They come 100 to a package and are perfect for securing loose wiring and hoses or can help serve as temporary fixes to many odd jobs and projects.

    • Stainless Tooth Tie Wraps feature super strong self-locking, stainless steel tooth, one piece design, standard size head.
    • Black Tie Wraps are UV resistant. Recommended for outdoor usage.
    • Metal Detectable
    • Temperature Ratings 185 F / 85 C.
    • UL Flame Rating 94V-2.
    • Minimum installation temperature is greater than 32 F or 0 C.
    • Made From Nylon 6/6.
    • Choose from lengths of 4", 5.5", 7.3", and 11.4"
    • 100 per Bag
  • Mag Daddy 3/4 Inch Medium Cable Daddy Magnetic Wire Fasteners, 5-Pack
    Mag Daddy 3/4 Inch Medium Cable Daddy Magnetic Wire Fasteners, 5-Pack
    x
                These medium Mag Daddy™ fasteners are designed to hold up to 10  unshielded Cat 5 Cables.  Rated at 16 lbs., these black fasteners  feature a magnetic bond for easy installation and removal without the  use of screws, wires, or zip-ties.
    • Easy Installation
    • Plastic lasts 20x longer than Nylon 6.6
    • Rotates 360°
    • Reusable
    • Take wires in and out
    • Sold in sets of 5 

    Suggested locations for use: Steel, Beams, Purlins, Ceiling Decks, Drop Ceiling Channels, Metal Joists, Frame Rail, Screw Heads, Metal Washer, etc.

    91033243 Cable Daddy Information/Instructions (PDF) 

  • Quarter Turn Springs with Step, Pack/10
    Quarter Turn Springs with Step, Pack/10
    x
                

    Stepped quarter turn springs mount easily with pop rivets. The step is approximately 0.250". Overall height of spring is 0.400" to 0.425". Eye-to-eye measurement is 1-3/8".

    Measurement Guide (Link)

  • Speed Fast Stainless Safety Wire, .032 Inch
    Speed Fast Stainless Safety Wire, .032 Inch
    x
                Speed Fast 304 stainless steel safety wire. Sold in one pound rolls and comes with a handy belt clip.
            
  • 1/2 Inch-20 Fine Thread Nylock Half Nuts, 6 Pack
    1/2 Inch-20 Fine Thread Nylock Half Nuts, 6 Pack
    x
                

    1/2 Inch-20 Fine Thread Nylock Half Nuts.  Works with front drive pins (part numbers 91003996 and 91003900).

    • 1/2 Inch-20 Fine Thread
    • Package of six.
  • Quik-Latch Products QL-25-SP Mini Quick-Latch, Polished Aluminum
    Quik-Latch Products QL-25-SP Mini Quick-Latch, Polished Aluminum
    x
                

    These small latches can be used for multi-purpose quick release latching. Center release button stays in the down position until re-latched. Each latch body has a 1-1/4" O.D. and is supplied with one mounting stud, two threaded nuts, and two washers. Mounting cup (sold seperately) is used to mount the stud underneath the panel. Mounting cup can be easily riveted or bolted to the back side of any panel.

    • Diameter of Latch Body:  1.23"
    • Length of Latch Body:  0.57"
    • 1/4"-20 Thread
    • Length of Mounting Stud:  2.13"

    Works great for:

    • T-Bucket bed covers
    • Hood pins
    • Deck lids
    • Air cleaner stud
    • Removeable body panels
  • Mag Daddy 1/2 Inch Large Cable Daddy Magnetic Wire/Cable Fasteners, 5-Pack
    Mag Daddy 1/2 Inch Large Cable Daddy Magnetic Wire/Cable Fasteners, 5-Pack
    x
                Mag Daddy Cable-Daddy™ fasteners are designed to  easily secure all wires and cables in a variety of environments. These  magnetic fasteners adhere to most all metal surfaces with an absurd 23  lbs. of retention force! Mag Daddy Cable-Daddy™ fasteners are the best  solution to wire and cable management. They're offered in a choice of  three sizes to meet your requirements. Whether you need to hold a brake  line in place or quickly organize wires or cables, Mad Daddy Cable-Daddy™  fasteners are the perfect fix.
    • Black rectangular cable hold-down
    • 23 lbs. of retention force
    • Magnet base is 26mm x 11mm with a total height of 18.5mm
    • Holds up to 20 unshielded Cat 5 Cables
    • Easy Installation
    • Plastic lasts 20x longer than Nylon 6.6
    • Ability to Rotate 360°
    • Re-usability
    • Take in and out wires
    • Sold in packs of 5

    Locations: Steel, Beams, Purlins, Ceiling Decks, Drop Ceiling Channels, Metal Joists, Frame Rail, Screw Heads, Metal Washer, etc.

    91062423 Cable Daddy Information/Instructions (PDF)

  • Tire Grinding Disc, 7 Inch Nail Head
    Tire Grinding Disc, 7 Inch Nail Head
    x
                
    • 7" diameter
    • Nail head design
    • Very aggressive, check sanctioning body rules before use

    NOTE: Use extreme caution - serious injury can result from the use of discs. When powered by a buffer, these discs can cut your arm or leg off.

    • Never use in a loose tire
    • Never use on a tire that is not inflated and fastened
    • Do not use while wearing loose fitted clothing
    • Use eye and face protection
  • Tube Seal End, Red Anodized, -24 AN, 1-7/8 Inch I/D
    Tube Seal End, Red Anodized, -24 AN, 1-7/8 Inch I/D
    x
                Tube seal ends are designed for street applications. Connect stainless  hose to outlet with low pressure indicator (not exceeding 50 psi when  using AN hose size 4-12 and under 25 psi with sizes 16-32).
            
  • Aluminum Allen Pipe Plugs, 1/4 Inch NPT
    Aluminum Allen Pipe Plugs, 1/4 Inch NPT
    x
                

    Allen pipe plugs are precision machined to ensure precise thread engagement. These lightweight aluminum plug fittings are designed to match up with all performance hose and hose ends. Blue anodized finish.

    AN Thread Sizing Guide (GIF)

    Fitting Thread Application Chart (GIF)

  • 5/8 Inch or 16mm to AN6 Banjo Fitting for Power Steering Pump
    5/8 Inch or 16mm to AN6 Banjo Fitting for Power Steering Pump
    x
                

    Zinc-plated steel banjo bolt assembly for the pressure connection (outlet) to the pump.

    Fitting 617-4830 fits our:

    • P/S pump # 91032922-GM
    • P/S pump # 91032908-BLK  
    • P/S pump # 91032908-CHR

    WARNING:  Fitting is designed to accept an AN-6 stainless steel braided wire high-pressure hose.

  • Tube Seal End, Chrome, -20 AN, 1-5/8 Inch I/D
    Tube Seal End, Chrome, -20 AN, 1-5/8 Inch I/D
    x
                Tube seal ends are designed for street applications. Connect stainless  hose to outlet with low pressure indicator (not exceeding 50 psi when  using AN hose size 4-12 and under 25 psi with sizes 16-32).
            
  • Small Diameter Steel Jam Nuts, 5/8-18, Pack/6
    Small Diameter Steel Jam Nuts, 5/8-18, Pack/6
    x
                Steel fine thread jam nuts for use with rod ends, heim joints, and clevis. Each has a small 3/4" O.D. for added clearance. Sold in bags of six nuts. Available with left or right thread.
            
  • Tri-Bar Wing Nut, Chrome
    $1.99
    Tri-Bar Wing Nut, Chrome
    x
                

    Wing nut is approximately 5/8” tall with 1/4"-20 threads.

  • Steel Hex Jam Nut, 1-1/8 Inch, Zinc Plated
    Steel Hex Jam Nut, 1-1/8 Inch, Zinc Plated
    x
                These grade A jam nuts are often used to lock or  "jam" something in place without clamping against another object. Jam  Nuts are typically low profile compared to a standard nut.  Zinc  plating, retards the corrosion rate in a normal atmosphere.
    • Steel
    • 1-1/8" Diameter
    • 7 RH coarse thread
    • .609 thick
    • Zinc finish
    • 1-11/16" wrench size
    • Specification: ANSI B18.2.2
  • 12 Point 5/16 Inch-24 Flange Flare Nuts, Headers, Torque Tube, 10 Pack
    12 Point 5/16 Inch-24 Flange Flare Nuts, Headers, Torque Tube, 10 Pack
    x
                

    This package of 10 block oxide flanged nuts feature a size of 5/16"-24 with RH thread. They are made of steel with a black oxide finish.

    • Set of 10
    • Flanged nuts
    • 5/16"-24 with RH thread
    • Steel with a black oxide finish
  • Russell Performance 662071 Endura Finish Aluminum Pipe Plug-3/4 In NPT
    Russell Performance 662071 Endura Finish Aluminum Pipe Plug-3/4 In NPT
    x
                

    Don't you just hate it when you have a polished intake or water pump and the only pipe plugs you can find are blue or steel? These Allen head aluminum plugs from Russell Performance have a durable anodized Endura finish.

    Fitting Thread Application Chart (GIF)

  • Lightweight Quarter Turn Fasteners, .500 Inch Grip, Pack/10
    Lightweight Quarter Turn Fasteners, .500 Inch Grip, Pack/10
    x
                

    1/4-turn hollow steel panel fasteners with washers. Save 50% in weight.  Package of ten.

    Measurement Guide (Link)

  • Steel Oval Head Quarter Turn Fasteners, .650 Inch Grip, Pack/10
    Steel Oval Head Quarter Turn Fasteners, .650 Inch Grip, Pack/10
    x
                

    These panel fasteners quickly fastens body panels, doors, tilt fronts and hood panels. Zinc plated steel.

    Use .500" grip range for thin materials, use .550" for mid-materials, and .600" and up for thick materials.

    Measurement Guide (Link)

  • Plain Steel Sleeve for 5/8 Inch Rod Ends, Custom Length
    Plain Steel Sleeve for 5/8 Inch Rod Ends, Custom Length
    x
                

    If you are building a hot rod just a little bit different than the next guy, you will probably need a special length tie rod or drag link sleeve. We stock many common and uncommon lengths along with custom, made-to-order lengths. Measurements are in assembled eye-to-eye lengths.

    To order:

    1. Use guide below to measure your finished length.
    2. The part number and length you order will be 3" longer than the sleeve you receive. (I.E., if you order a 48" part number, you will receive a 45" long sleeve.) This is the difference in length required to give you the correct finished center-to-center measurement.
    3. All sleeves will have internal RH thread in one end and LH thread in the other.

    Measuring Guide for Tie Rod/Drag Link (GIF)

  • Heavy Duty Tube Adapter - 1 3/4 Inch O.D., .125 Wall Tubing
    Heavy Duty Tube Adapter - 1 3/4 Inch O.D., .125 Wall Tubing
    x
                

    You'll need the right tube adapters to accept your heavy duty 1-1/4" Rock Ends or X-series rod ends. These weld-in tube adapters are CNC machined from 1020 steel and are available with RH or LH threads.

     

    1-3/4” O.D. with .125 wall tubing should net 1-1/2” I.D.

     

  • Mustang II Power Rack Bolt Kit
    Mustang II Power Rack Bolt Kit
    x
                
    • (2) 5/8"-11 x 4-1/2" coarse hex cap screw Grade 5
    • (2) 9/16" hardened flat washers
    • (2) 5/8"-11 nyloc nuts
    • (1) Instruction sheet
  • Aluminum Jam Nuts, 3/8-24 RH, Pack/6
    Aluminum Jam Nuts, 3/8-24 RH, Pack/6
    x
                

    These jam nuts are made of 7075 aluminum alloy and are clear anodized for corrosion resistance. Fine thread for use with rod ends, heim joints, and clevis.

    Sold in package of six.

  • Male Bullet Connectors, 16-14 Gauge
    Male Bullet Connectors, 16-14 Gauge
    x
                Secure loose/spliced wire ends to each other with these bullet connectors. 
    • Works with 16-14 gauge wire
    • Comes in a package of 100
  • Black Aluminum Jam Nuts, 5/16-24 Thread, 12 Pack
    Black Aluminum Jam Nuts, 5/16-24 Thread, 12 Pack
    x
                
    These jam nuts are made of 7075 aluminum alloy and are black anodized for corrosion resistance.
    • Fine thread for use with rod ends, heim joints, and clevis
    • Includes (6) RH and (6) LH threaded jam nuts
    • 5/16-24 Thread
    • 3/8" hex
    • Pack of 12
  • Plain Steel Jam Nut, 11/16-18 LH
    Plain Steel Jam Nut, 11/16-18 LH
    x
                

    Plain steel fine thread jam nuts for use with rod ends, heim joints, and clevis.

  • Black Aluminum Jam Nuts, 1/4-28 Thread, 12 Pack
    Black Aluminum Jam Nuts, 1/4-28 Thread, 12 Pack
    x
                
    These jam nuts are made of 7075 aluminum alloy and are black anodized for corrosion resistance.
    • Fine thread for use with rod ends, heim joints, and clevis
    • Includes (6) RH and (6) LH threaded jam nuts
    • 1/4-28 Thread
    • 3/8" hex
    • Pack of 12
  • HRP HRP6997 Mule Axle Rack Combo
    HRP HRP6997 Mule Axle Rack Combo
    x
                
    • Each set comes with 4 tube clamps
    • Mounts on front of mule, adjustable and easily removed
    • Aluminum construction
    • Powdercoated black
    • Set contains 2 brackets
  • Steel Slotted Oval Head Quarter Turn Fastener, .500 Inch Grip
    Steel Slotted Oval Head Quarter Turn Fastener, .500 Inch Grip
    x
                

    These panel fasteners quickly fasten body panels, doors, tilt fronts and hood panels.  Use .500" grip range for thin materials, use .550" for mid-materials, and .600" and up for thick materials.

    • .500" grip
    • Slotted, oval head
    • Perfect for Micro Sprint applications

    Measurement Guide (Link)

  • Steel Hex Jam Nuts, 1 Inch Weight Jack Bolt, Zinc Plated
    Steel Hex Jam Nuts, 1 Inch Weight Jack Bolt, Zinc Plated
    x
                These grade A jam nuts are often used to lock or "jam"  something in place without clamping against another object. Jam Nuts are  typically low profile compared to a standard nut.  Zinc plating, retards the corrosion rate in a normal atmosphere. 
    • Steel
    • 1" Diameter
    • 8 RH coarse thread
    • .547 thick
    • Zinc finish
    • 1-1/2" wrench size
    • Specification: ANSI B18.2.2
  • Tube Seal End, Chrome, -10 AN, 13/16 Inch I/D
    Tube Seal End, Chrome, -10 AN, 13/16 Inch I/D
    x
                Tube seal ends are designed for street applications. Connect stainless  hose to outlet with low pressure indicator (not exceeding 50 psi when  using AN hose size 4-12 and under 25 psi with sizes 16-32).
            
  • Self-Ejecting Quarter Turn Fasteners, .700 Inch Grip, Pack/10
    Self-Ejecting Quarter Turn Fasteners, .700 Inch Grip, Pack/10
    x
                

    Flush mounting, self-ejecting panel fasteners. Zinc plated steel with 5/16" shank. Package of 10.

    Use .500" grip length for thin materials, .700" grip length for thicker materials.

    Measurement Guide (Link)

  • Aluminum Flare Fitting Cap, Blue, -8 AN
    Aluminum Flare Fitting Cap, Blue, -8 AN
    x
                

    Aluminum caps to seal 37° flare AN male fittings. Blue anodized finish.

    Fitting Thread Application Chart (GIF)

Goto Previous PagePrevious Page
1 2 3 4 5 ... 9