Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 10

Products

Exhaust Pipes

Shop Streed Rod Headers & Exhaust At Speedway Motors

Speedway Motors has the street rod headers and mufflers you need, at a price you can afford! Check out our huge inventory of chassis headers, fenderwell headers, long tube headers, clipster headers, lake-style headers and tight-fit block hugger headers, all available with durable ceramic AHC coating. Find those exotic fender-well headers and electric exhaust cut-outs, too! Don't forget about our exclusive Tru-Ram exhaust manifolds, or our selection of header kits and header wrap. With an awesome selection of performance mufflers, header flangers, exhaust wrap, glasspacks, and exhaust tips, Speedway Motors is your hot rod exhaust superstore!

Featured Products
  • Polished Stainless Exhaust Tubing
    From: $17.99
    Product Rating: 4.78 Stars
    Polished Stainless Exhaust Tubing
    (Part #910133)
    x
                

    Our fully polished 304 grade seamed stainless steel tubing has a wall thickness of .07" (15 gauge) which makes it perfect for building weld up headers or exhaust systems. Pair this header tubing with one of our stainless header flanges for the perfect set of custom headers. Sizes available are listed by the outside diameter (O.D.) dimension.

    • Available in 1"-3" O.D., sold by the foot
    • Made of 100% polished stainless steel
    • Seamed 15 gauge
    • UPS up to 7'
    • Priced per ft.
    1. If you want us to cut the tubing into smaller lengths than you are ordering, please tell us the lengths of tubing you need by keying that information into our comment area located just above the payment information of Step 2 of the Checkout Process.
    2. If your tubing can be cut in 3 ft. or 4 ft. lengths, the price will be discounted $1.00/ft.
    3. Please keep in mind that the longest piece that can ship by UPS is 7 feet. The longest piece that can ship by truck is 10 feet.
    4. There are no returns on this stainless steel exhaust tubing.
  • Exhaust Reducer, 3 Inch I.D. to 2-1/2 Inch O.D.
    Exhaust Reducer, 3 Inch I.D. to 2-1/2 Inch O.D.
    (Part #9172530)
    x
                

    Mild steel exhaust reducer to repair or build your own exhaust system. The swedge for the reduction occurs midway at 2-1/4”.

  • Garage Sale - SuperMaxx 2005-08 Corvette C6 Intermediate Tubes w/o Cats - 2-1/2 Inch
    New
    Garage Sale - SuperMaxx 2005-08 Corvette C6 Intermediate Tubes w/o Cats - 2-1/2 Inch
    (Part #AUP3411)
    x
                

    This intermediate pipe is garage sale priced because it is new old stock. 

     No Warranty, No Returns On Garage Sale Items

    Gain up to 16 HP and 16 Ft. Lbs. over factory exhaust! Dynatech® SuperMaxx stainless steel exhaust systems are engineered to give your car winning performance both on and off the track. Designed to be a direct replacement fit for restrictive factory exhaust and catalytic converter systems, these systems are a great way to get that extra power you are looking for.

    NOTE: All Non-ZO6 Corvettes came standard w/ 2-1/2" exhaust.

    '05 - '10 C6/Z06 Installation Instructions (PDF)

  • Slip-Over Kickout Extension Pipes, AHC, 3-1/2 x 20 Inch
    Slip-Over Kickout Extension Pipes, AHC, 3-1/2 x 20 Inch
    (Part #9101338H)
    x
                

    These extensions are designed for use with "T" roadster headers. Professionally cut and mandrel bent extensions slip over 3-1/2" diameter collector pipes. Features ceramic coating for superior protection.

  • Mild Steel Exhaust Bend Kit, 2-1/2 Inch
    Mild Steel Exhaust Bend Kit, 2-1/2 Inch
    (Part #91013824)
    x
                

    Sometimes it's just easier to do it yourself than have someone else screw it up for you. These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end to allow easy installation. Clamps sold separately. Natural, uncoated finish. Not aluminized.

    • Four 48" Straight Pipes
    • Four 90 Degree Pipes
    • Four 45 Degree Pipes 
    • Four 180 Degree U-Bends
  • Kickout Pipes, 3-1/2 x 7 Inch
    Kickout Pipes, 3-1/2 x 7 Inch
    (Part #91013379)
    x
                Raw steel kickouts are professionally cut and mandrel bent.
            
  • Slip-Over Extension Pipes w/ Mufflers, Chrome, 3-1/2 x 26 Inch
    Slip-Over Extension Pipes w/ Mufflers, Chrome, 3-1/2 x 26 Inch
    (Part #4473822)
    x
                

    These extensions are designed for use with "T" roadster headers. Professionally cut and mandrel bent extensions slip over 3-1/2" diameter collector pipes. Features a 12-1/2" perforated glasspack muffler installed inside the extension. Muffler has a 1.900" I.D.

  • Exhaust Dump Tubes
    From: $12.99
    Product Rating: 5.00 Stars
    Exhaust Dump Tubes
    (Part #91013340)
    x
                Build your own open exhaust with our 16" long tube with end cap and bolts. 2" O.D. inlet. Choose black, chrome or stainless steel finish.
            

Filter

"Street Rod, Exhaust Pipes" Page 1 of 10

Page 1 of 10

  • Dynatech® 794-60207 Mild Steel J-Bend, 2-1/4 Inch
    Dynatech® 794-60207 Mild Steel J-Bend, 2-1/4 Inch
    (Part #31179460207)
    x
                

    Dynatech® stocks a complete inventory of mandrel bent J-bends. These are made from premium grade mild steel tubing. The bend radius of each tube is 1.5 times the O.D. of the tubing.

  • Mild Steel Exhaust U-Bend, 2-1/2 Inch
    Mild Steel Exhaust U-Bend, 2-1/2 Inch
    (Part #91013856)
    x
                

    Natural finish (uncoated) 18-gauge mandrel bent mild steel U-bends for building your own weld up headers or replacing bent or damaged header tubing.

    • 2-1/2" outside diameter header pipe
    • 3" bend radius
  • Dougs Headers DEC300A Stainless Steel Electric Exhaust Cut-Outs-3 Inch
    Dougs Headers DEC300A Stainless Steel Electric Exhaust Cut-Outs-3 Inch
    (Part #447303)
    x
                These rugged Doug's Headers electric exhaust  cutouts allow you to convert to a wide-open, unobstructed exhaust system  with the flip of a dash-mounted switch. Doug's electric exhaust cutouts  are built to last; they feature full stainless steel construction with a  heavy-duty Dayton gear reduction rack and pinion electric drive  mechanism. Best of all, these cutouts use a self-cleaning, knife-edge  seat for a leakproof seal every time, whether open or closed. Doug's  Headers electric exhaust cutouts include a pre-wired harness, a toggle  switch, and fuses for an easy installation.
    • 3.000 in.
    • Stainless steel
    • Sold as a pair
    • Includes wiring harness
  • Stainless Steel Exhaust Bend, 90 Degree, 2-1/2 Inch
    Stainless Steel Exhaust Bend, 90 Degree, 2-1/2 Inch
    (Part #91013888)
    x
                

    Each pipe is expanded on one end to allow easy installation. 16-gauge T304 stainless material. Natural, uncoated finish.

  • Combo Exhaust Bend/Header Tubing, 2-1/2 Inch
    Combo Exhaust Bend/Header Tubing, 2-1/2 Inch
    (Part #91013896)
    x
                These mild steel combo exhaust bends are perfect for building or repairing headers.  They feature smooth mandrel bends with a bend radius of 7" and an outside diameter of 2-1/2". 
    • Mild steel
    • For building or repairing headers
    • 16-gauge (0.06" thick)
    • 2-1/2" O.D

  • Stainless Steel Exhaust Bend, 90 Degree, 2-1/4 Inch
    Stainless Steel Exhaust Bend, 90 Degree, 2-1/4 Inch
    (Part #91013884)
    x
                

    Each pipe is expanded on one end to allow easy installation. 16-gauge T304 stainless material. Natural, uncoated finish.

  • Lake Pipes, 70 Inch
    From: $149.99
    Product Rating: 4.78 Stars
    Lake Pipes, 70 Inch
    (Part #91013397)
    x
                

    Beautiful 1950's style lake pipes with removable bolt-on cap. 2" O.D. heavy gauge tubing. Mounting brackets sold separately.

    Available in chrome steel or stainless steel. Sold in pairs.

    Not legal for sale or use in California on pollution controlled motor vehicles.

  • Combo Exhaust Bend/Header Tubing, 1-7/8 Inch
    Combo Exhaust Bend/Header Tubing, 1-7/8 Inch
    (Part #91013873)
    x
                Mild steel combo exhaust bends for building or  repairing headers. 16-gauge tubing with 1-7/8" O.D.
            
  • Chrome Fish Tail Tips
    $64.99
    Chrome Fish Tail Tips
    (Part #91013342)
    x
                The fish tail tip will give your car the look you're after. This 8" long chrome beauty has a 1-7/8" O.D. inlet.
            
  • Lake Style Header Turn-Outs, AHC
    Lake Style Header Turn-Outs, AHC
    (Part #9300541H)
    x
                

    Exhaust turn-outs for Speedway Lake Style Headers. Available in plain steel or long-lasting AHC ceramic coated.

  • Dynatech® 794-60209 Mild Steel J-Bend, 2-1/2 Inch
    Dynatech® 794-60209 Mild Steel J-Bend, 2-1/2 Inch
    (Part #31179460209)
    x
                

    Dynatech® stocks a complete inventory of mandrel bent J-bends. These are made from premium grade mild steel tubing. The bend radius of each tube is 1.5 times the O.D. of the tubing.

  • Mild Steel Exhaust Bend, 180 Degree, 2-1/2 Inch
    Mild Steel Exhaust Bend, 180 Degree, 2-1/2 Inch
    (Part #91013881)
    x
                
    • Each pipe is expanded on one end to allow easy installation
    • 16-gauge mild steel
    • Natural, uncoated finish
    • Not aluminized
  • Chrome Echo Can Tips
    From: $36.99
    Product Rating: 5.00 Stars
    Chrome Echo Can Tips
    (Part #91013343)
    x
                These are a blast from the past! Everyone ran echo cans on their flatties in the good 'ol days, now you can too. Big 3-1/2" chrome tips will give you that sound you have been looking for. 2" I.D. inlet, and available in 12" or 18" tips.
            
  • Lake Pipes, 60 Inch
    From: $139.99
    Product Rating: 5.00 Stars
    Lake Pipes, 60 Inch
    (Part #91013396)
    x
                

    Beautiful 1950's style lake pipes with removable bolt-on cap. 2" O.D. heavy gauge tubing. Mounting brackets sold separately.

    Available in chrome steel or stainless steel. Sold in pairs.

    Not legal for sale or use in California on pollution controlled motor vehicles.

  • Stainless Steel Oval Exhaust Tip, 2-1/2 Inch Inlet
    Stainless Steel Oval Exhaust Tip, 2-1/2 Inch Inlet
    (Part #91013333)
    x
                

    These weld-on, polished stainless steel oval exhaust tips are universal to fit 2-1/2" diameter pipes.  They have a 3" x 5-3/4" outlet and are 11-3/8" long.

    • Weld-on
    • Universal
    • Highly Polished Stainless Steel
    • Oval Design
    • Fit 2-1/2" Diameter Pipes
    • 3" x 5-3/4" outlet
    • 11-3/8" long

     

  • Slip-Over Kickout Extension Pipes, AHC, 3-1/2 x 26 Inch
    Slip-Over Kickout Extension Pipes, AHC, 3-1/2 x 26 Inch
    (Part #9101337H)
    x
                

    These extensions are designed for use with "T" roadster headers. Professionally cut and mandrel bent extensions slip over 3-1/2" diameter collector pipes. Feature a ceramic coating for superior protection.

  • Exhaust Reducer, 4 Inch I.D. to 3-1/2 Inch O.D.
    Exhaust Reducer, 4 Inch I.D. to 3-1/2 Inch O.D.
    (Part #9174035)
    x
                

    Mild steel exhaust reducer to repair or build your own. 

    • 4-1/2” overall length
    • Swedge for the reduction occurs midway at 2-1/4”
  • Exhaust Reducer, 3-1/2 Inch I.D. to 3 Inch O.D.
    Exhaust Reducer, 3-1/2 Inch I.D. to 3 Inch O.D.
    (Part #9173035)
    x
                

    Mild steel exhaust reducer to repair or build your own.

    • 4-1/2” overall length 
    • Swedge for the reduction occurs midway at 2-1/4”
     

     

  • Assorted Header Tubing Exhaust Bends, 1-1/2 Inch
    Assorted Header Tubing Exhaust Bends, 1-1/2 Inch
    (Part #91013815)
    x
                Approximately 18 ft. with assorted bends of  16-gauge mild steel exhaust tubing. Use this handy kit to repair or  build your own headers.  Each kit will vary as to the number and type of  bends.
            
  • Dynatech® 794-60204 Mild Steel J-Bend, 1-7/8 Inch
    Dynatech® 794-60204 Mild Steel J-Bend, 1-7/8 Inch
    (Part #31179460204)
    x
                

    Dynatech® stocks a complete inventory of mandrel bent J-bends. These are made from premium grade mild steel tubing. The bend radius of each tube is 1.5 times the O.D. of the tubing.

Goto Previous PagePrevious Page
1 2 3 4 5 ... 10