Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 27

Products

Exhaust Headers

Shop Streed Rod Headers & Exhaust At Speedway Motors

Speedway Motors has the street rod headers and mufflers you need, at a price you can afford! Check out our huge inventory of chassis headers, fenderwell headers, long tube headers, clipster headers, lake-style headers and tight-fit block hugger headers, all available with durable ceramic AHC coating. Find those exotic fender-well headers and electric exhaust cut-outs, too! Don't forget about our exclusive Tru-Ram exhaust manifolds, or our selection of header kits and header wrap. With an awesome selection of performance mufflers, header flangers, exhaust wrap, glasspacks, and exhaust tips, Speedway Motors is your hot rod exhaust superstore!

Featured Products
  • Garage Sale - Dynatech Chevy Street Stock Headers, 1-3/4 - 1-7/8, 3-1/2 Collector
    New
    Garage Sale - Dynatech Chevy Street Stock Headers, 1-3/4 - 1-7/8, 3-1/2 Collector
    (Part #AUP3617)
    x
                

    This is garage sale priced because it has been discontinued.

    No Warranty, No Returns on Garage Sale Items    

     

    Fits Following Models: Camaro ('70-'81). Chevelle ('64-'77), Monte Carlo ('72-'77) & Chevy II Nova ('75-'79)

    • Fits in stock location or with additional engine setback
    • For Standard Chevy or Crate Engine applications
    • Designed for straight plug heads only
    • Clears stock clutch linkage
    • Gaskets, bolts and hardware included

    Header Dimension Chart 

  • Speedway Small Block Chevy Hugger Tight Fit Headers, Plain
    Speedway Small Block Chevy Hugger Tight Fit Headers, Plain
    (Part #9300100)
    x
                

    These S/B Chevy tight fit headers fit difficult applications where space is limited. Shorty headers have a 1-1/2" primary with 2-1/2" collector. Complete with reducers, gaskets, and bolts.

    For "round" port small block Chevy cylinder heads. Will NOT fit angled plug heads. 

    • Drivers side collector is 2" from pan rail
    • Passenger side collector is 1/2" from pan rail
    • Flange thickness is 0.212"

    Header Dimensions (GIF)

  • Corvette Style 2-1/2 Inch Ram Horn Exhaust Manifold
    Corvette Style 2-1/2 Inch Ram Horn Exhaust Manifold
    (Part #9300327)
    x
                

    These "rams horn" cast iron manifolds were patterned off the 1962-63 327 Corvette but are not OEM remanufactured manifolds. They feature the big 2-1/2" diameter outlets and have provisions to accept original alternator type brackets.

    These headers are copies of the original headers on the 62-63 Corvettes and can be used on almost any small block application. The cast in brackets are for the water tank on the drivers side and generator bracket on the passenger side. These can be cut off and smoothed per customers preference. These are a square port configuration with 1-5/8” top to bottom and also side to side. Compare to your head port size for compatibility.

    • 1962-63 327 Corvette
    • 2-1/2" diameter outlets
    • Use on almost any small block application up until the advent of the LS series engines in 1999
    • Use with 3 bolt header reducer/collector
    • Sold each, specify right or left.
    • Gaskets and bolts/hardware are not included
  • Big Block Chevy Weld Up Header Kit, 2 In Primary, 3.5 In Collector
    Big Block Chevy Weld Up Header Kit, 2 In Primary, 3.5 In Collector
    (Part #41865640)
    x
                

    These B/B Chevy (BBC) headers feature 18 gauge mild steel designed for many racing and rodding applications where 396, 402, 427, 454 and 502 Chevy engines are used. Headers have a 2" diameter tube and 3-1/2" diameter collector. Kit includes eight mandrel-bent primary tubes,  two pre-formed collectors, two extra-thick oval port flanges, two gaskets and twelve header bolts.

    Designed for the seasoned, hands-on enthusiast, weld up headers will require some cutting, fitting and welding.

  • 1936-53 Flathead Ford V8 Exhaust Baffles
    1936-53 Flathead Ford V8 Exhaust Baffles
    (Part #91615201)
    x
                

    A Speedway Motors exclusive! The center exhaust ports on flatheads are siamesed. Our baffles separate these two exhaust ports and prevent reversion while decreasing the dilution of the intake charge. These are a must for high-performance flatheads. The baffle is held in place with an extended stud that replaces the stock cylinder head stud. 

    • Manufactured from bronze to withstand high exhaust temperatures
    • Includes center adapter stud to pinch the baffle in place
    • Fitting required
    • Use on 1936-1953 24-stud engines only

    916-15201 Instructions (PDF)

  • Garage Sale - Dynatech Modified 604 Crate Engine Headers, 1 Inch Triple-Step Long Tube
    New
    Garage Sale - Dynatech Modified 604 Crate Engine Headers, 1 Inch Triple-Step Long Tube
    (Part #UP53035)
    x
                

    These headers are garage sale priced because they have some dings and small dents from shipping. 

     No Warranty, No Returns On Garage Sale Items

    These modified stainless steel race headers are engineered for use with 604 Crate Engines. These headers are specially designed for Shaw, Hoffman, and Dirtworks chassis.

    Shaw, Hoffman, and Dirtworks chassis.
    • 1" Raised
    • Shaw, Hoffman, and Dirtworks chassis
    • Stainless Steel for increased header life
    • TIG Welded
    • Triple-step long tube design
    • 9" long  collector
    • 3" collector outlet diameter
    • Gaskets and bolts inclduded
    • Raised and offset engine positions
    • Laser cut flanges with 604 crate port design 
    • 44.211 lbs.
    • 40"x21"x16"

    Header Dimension Chart

  • Thermo Tec 12001 Hi-Heat Header Wrap Coating, Black
    Thermo Tec 12001 Hi-Heat Header Wrap Coating, Black
    (Part #70412001)
    x
                

    To finish off a clean and well-protected Exhaust Insulating Wrap application it is recommended to use the Hi-Heat Coating. The coating will protect the wrap from abrasion and harmful liquid spills. Extra resins and binders toughen the surface, extend the life of wrap by protecting it from friction, and seal the pores to minimize the penetration of harmful liquids.

    The coating also works excellent as a paint directy on metal surfaces.                 

    CANNOT BE SHIPPED BY AIR!

  • Header Collector, 1 3/4 Inch Primaries
    Header Collector, 1 3/4 Inch Primaries
    (Part #91013837)
    x
                Weld-on header collectors. Available in 3" or 3-1/2" collector size. 1-3/4" tube size. 
            

Filter

"Street Rod, Exhaust Headers" Page 1 of 27

Page 1 of 27

  • Speedway Header and Exhaust Wrap, 1 Inch x 100 Ft, Black Color
    Speedway Header and Exhaust Wrap, 1 Inch x 100 Ft, Black Color
    (Part #91013805)
    x
                

    If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

    • Retains exhaust heat within the tube for increased flow and horsepower
    • Reduced underhood temperatures
    • Protects surronding components from excessive heat
    • Made from a durable, specially treated woven glass fiber material

    For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

  • Big Block Chevy, Block Hugger, Tight-Fit Headers, AHC Coated
    Big Block Chevy, Block Hugger, Tight-Fit Headers, AHC Coated
    (Part #9300102H)
    x
                

    Rodders and racers are known for wedging big engines into small spaces, so these big-block Chevy shorty headers are designed for applications where space is limited. They offer great flow in a compact package and will fit where many other headers won’t. These block hugger headers make difficult installations easy. These shorty headers are ceramic coated headers.

    • Fits round-port cylinder heads
    • Compact design fits a wide variety of applications
    • Made from 16-gauge tubing
    • Includes reducers, gaskets, and bolts
    • 1-3/4” primary tube diameter
    • 2-1/2” collector diameter
    • Can be used with most oil filter systems and transmission/starter combinations
    • Will not fit '55-'57 Chevy cars, Camaros, or other modern vehicles which have a crossmember below the engine's center two exhaust ports
    • Fits standard deck big blocks only

    Header Dimesnions (GIF)

  • Dynatech® Big Block Chevy Two Step Dragster headers, 2-3/8 - 2-1/2
    Dynatech® Big Block Chevy Two Step Dragster headers, 2-3/8 - 2-1/2
    (Part #31175099410)
    x
                

    Get the most out of your high performance engine with these drag racing headers from Dynatech®.  Sold as a pair, these stepped primary headers feature 360° gusset supports for increased durability and all come with a beautiful chrome finish.

    • Stepped 2-3/8" - 2-1/2" tubes
    • 4-1/2" merge collector included
    • Equal length for superior acceleration
    • Large radius, CNC mandrel bent
    • CNC laser cut flanges for superior fit
    • Chrome finish
    • For BBC Pro Stock, Comp, S/G, or Strut Front car
  • Hooker Headers 8501HKR LS Cast Iron Exhaust Manifolds
    Hooker Headers 8501HKR LS Cast Iron Exhaust Manifolds
    (Part #9308501)
    x
                Please view the product's page for more information
            
  • Dynatech® Plain Steel Slip-On Collector, 2-1/8 x 3-1/2 x 8 Inch
    Dynatech® Plain Steel Slip-On Collector, 2-1/8 x 3-1/2 x 8 Inch
    (Part #31178360835)
    x
                Dynatech® slip-on race collectors offer great performance at an affordable  price. Changing  collector outlet size or length are popular ways to make tuning adjustments as  track conditions change (i.e. changing to a larger collector outlet size can aid  in "slick track" conditions).  
    • Race-ready to bolt on right out of the box
    • U-tabs are a direct bolt-on fit to all Dynatech® Drag Headers
    • Hi-temp black paint
    • Long-transition 4-into-1 design for maximum power
    • Listed by Primary I.D. x Collector O.D. x Length
    • Sold individually

    Note: O2 bung not included.

  • Hot Stuff Exhaust Manifold Dressing
    Hot Stuff Exhaust Manifold Dressing
    (Part #91044079)
    x
                Hot Stuff is more than just ordinary header paint. This space-age blend of stainless steel and ceramic compounds is the ideal coating for cast iron exhaust manifolds! It withstands 2400F° (manifolds rarely exceed 1200°F). Only minimal preparation is required. Easily applied with a small brush or a rag. Coating heat-cures by simply running the engine for 10 minutes. Leaves a durable, raw cast iron appearance.

    A 2 oz. container will do 2-4 exhaust manifolds on average. Not recommended for tube steel headers.

  • Dynatech® Ceramic Coated Slip-On Collector, 2-3/8 x 4 x 12 Inch
    Dynatech® Ceramic Coated Slip-On Collector, 2-3/8 x 4 x 12 Inch
    (Part #31178381241)
    x
                

    Dynatech® slip-on race collectors offer great performance at an affordable price. Changing collector outlet size or length are popular ways to make tuning adjustments as track conditions change (i.e. changing to a larger collector outlet size can aid in "slick track" conditions).

    • Direct bolt-on fit to all Dynatech® Drag Headers
    • Durable Ceramic coating
    • Long-transition 4-into-1 design for maximum power
    • 18mm accessory bung (see Notes)
    • Listed by Primary I.D. x Collector O.D. x Length
    • Sold individually
  • Small Block Chevy Chassis Headers, Chrome
    Small Block Chevy Chassis Headers, Chrome
    (Part #930C1C)
    x
                

    Give your small block Chevy full-length header performance in a package that fits within the confines of your 1928-1934 Ford street rod chassis. These headers can be used with nearly any oil filter system or transmission and starter combination.

    • Full-length header performance
    • Has an attractive chrome plated finish
    • Tucks close to engine to allow room inside of narrow frame rails
    • Works well with angle-plug heads
    • Works with stock steering box and most Vega and Mustang conversions
    • Due to variations in manufacturing and the unlimited engine/chassis combos, all dimensions, applications and measurements are approximations only!

    Header Specification Chart (GIF)

    Chrome Warning: Due to a revised chroming process brought on by recent EPA regulations and high labor costs, today's chrome is not the quality of days gone by. Be Aware: Exhaust components which are chrome plated are now much more susceptible to blueing, blistering, peeling & corrosion. No warranty or returns on chrome exhaust items once them have been installed.

    Not legal for sale or use in California on pollution controlled vehicles

     

  • Flowmaster 15923 Ball Flange 3.5 Inch Collector to 3 Inch
    Flowmaster 15923 Ball Flange 3.5 Inch Collector to 3 Inch
    (Part #37815923)
    x
                These neat, two bolt ball flange kits give you a leak free exhaust connection but allow for engine flex and misalignment. Several collector and exhaust sizes available. Requires Welding Sold per pair. 
            
  • Small Block Chevy Header Kit, 1-7/8 Brodix Spread Port 3-1/2 Collector
    Small Block Chevy Header Kit, 1-7/8 Brodix Spread Port 3-1/2 Collector
    (Part #41865620)
    x
                

    Save money by welding and assembling your own headers! These small block Chevy header kits will work for many racing and rodding applications. It includes everything you need to assemble a pair of high-quality headers: eight mandrel-bent primary tubes, two pre-formed collectors, two extra-thick standard-port flanges, two gaskets, and 12 header bolts.

    Designed for the seasoned, hands-on enthusiast, weld up headers will require some cutting, fitting and welding.

    • Thick 5/16" steel flanges
    • Mandrel-bent 18-gauge mild steel tubing
    • Pre-formed 4-into-1 collectors
    • 8" length from longest to tube flange to bend
    • 5" length from shortest tube flnge to the bend
  • Dynatech® 730-10010 Stainless Steel Tight-Fit, Block Hugger Headers
    Dynatech® 730-10010 Stainless Steel Tight-Fit, Block Hugger Headers
    (Part #31173010010)
    x
                Please view the product's page for more information
            
  • Dynatech® 780-10516 Ceramic Coated Merge Collector, 2 x 3-1/2 Inch
    Dynatech® 780-10516 Ceramic Coated Merge Collector, 2 x 3-1/2 Inch
    (Part #31178010516)
    x
                

    Dynatech® Ceramic Coated Merge Collectors are a popular option when your racing application requires maximum horsepower. Merge collectors are not usually a "bolt it on and go" part. In order to realize the full potential of this collector design, dyno testing is recommended.

    • 100% TIG-welded
    • Optimum reduction angle
    • Increases torque and horsepower
    • Sold individually
    • Listed as Primary I.D. x Collector O.D.

    Note: Does not include O2 bungs. To purchase separately, order part 311-78510097.

    How It Works (PDF)

  • Dynatech® 780-10514 Ceramic Coated Merge Collector 1-3/4 x 3-1/2 Inch
    Dynatech® 780-10514 Ceramic Coated Merge Collector 1-3/4 x 3-1/2 Inch
    (Part #31178010514)
    x
                

    Dynatech® Ceramic Coated Merge Collectors are a popular option when your racing application requires maximum horsepower. Merge collectors are not usually a "bolt it on and go" part. In order to realize the full potential of this collector design, dyno testing is recommended.

    • 100% TIG-welded
    • Optimum reduction angle
    • Increases torque and horsepower
    • Sold individually
    • Listed as Primary I.D. x Collector O.D.

    Note: Does not include O2 bungs. To purchase separately, order part 311-78510097.

    How It Works (PDF)

  • Dynatech® 780-11516 Ceramic Coated Merge Collector, 2 x 3 Inch
    Dynatech® 780-11516 Ceramic Coated Merge Collector, 2 x 3 Inch
    (Part #31178011516)
    x
                

    Dynatech® Ceramic Coated Merge Collectors are a popular option when your racing application requires maximum horsepower. Merge collectors are not usually a "bolt it on and go" part. In order to realize the full potential of this collector design, dyno testing is recommended.

    • 100% TIG-welded
    • Optimum reduction angle
    • Increases torque and horsepower
    • Sold individually
    • Listed as Primary I.D. x Collector O.D.

    Note: Does not include O2 bungs. To purchase separately, order part 311-78510097.

    How It Works (PDF)

  • Big Block Chevy Lake Style Headers, Stainless Steel
    Big Block Chevy Lake Style Headers, Stainless Steel
    (Part #9300570S)
    x
                Please view the product's page for more information
            
  • Small Block Chevy Fat Fender Chrome Headers
    Small Block Chevy Fat Fender Chrome Headers
    (Part #9300150C)
    x
                
    • Chrome plated
    • Fit SBC 265-400
    • For 1935-1948 fat-fendered street rod
    • Must cut the inner fender panels
    • Includes collectors, collector gaskets, header gaskets, header bolts, and collector bolts

    Chrome Warning: Due to a revised chroming process brought on by recent EPA regulations and high labor costs, today's chrome is not the quality of days gone by. Be Aware: Exhaust components which are chrome plated are now much more susceptible to blueing, blistering, peeling & corrosion. No warranty or returns on chrome exhaust items once them have been installed.

    Not legal for sale or use in California on pollution controlled vehicles

     

  • Big Block Chevy Tight-Fit, Block Hugger Headers, Chrome
    Big Block Chevy Tight-Fit, Block Hugger Headers, Chrome
    (Part #9300102C)
    x
                

    Rodders and racers are known for wedging big engines into small spaces, so these big-block Chevy tight-fit headers are designed for applications where space is limited. They offer great flow in a compact package and will fit where many other headers won’t. These shorty headers make difficult installations easy.

    • Fits round-port cylinder heads
    • Compact design fits a wide variety of applications
    • Made from 16-gauge tubing
    • Includes reducers, gaskets, and bolts
    • 1-3/4” primary tube diameter
    • 2-1/2” collector diameter
    • Can be used with most oil filter systems and transmission/starter combinations
    • Will not fit '55-'57 Chevy cars, Camaros, or other modern vehicles which have a crossmember below the engine's center two exhaust ports
    • Fits standard deck big blocks only

    Header Dimensions (GIF)

    Chrome Warning: Due to a revised chroming process brought on by recent EPA regulations and high labor costs, today's chrome is not the quality of days gone by. Be Aware: Exhaust components which are chrome plated are now much more susceptible to blueing, blistering, peeling & corrosion. No warranty or returns on chrome exhaust items once them have been installed.

  • Speedway Header and Exhaust Wrap, 2 Inch x 50 Ft, Black Color
    Speedway Header and Exhaust Wrap, 2 Inch x 50 Ft, Black Color
    (Part #91013806)
    x
                

    If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

    • Retains exhaust heat within the tube for increased flow and horsepower
    • Reduced underhood temperatures
    • Protects surronding components from excessive heat
    • Made from a durable, specially treated woven glass fiber material

    For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

  • Small Block Ford 289-351W Lake Style Headers, AHC Coated
    Small Block Ford 289-351W Lake Style Headers, AHC Coated
    (Part #9300575H)
    x
                

    Nostalgia-style street rods are hotter than ever, and nothing gives your vintage rod that authentic dry lakes competition look like a set of lakester headers. The small-block Ford lake header works great on early hoodless and fenderless rods like T-buckets, Model A's, and 1932-1934 Fords. The headers have vertical flanges so you can connect them to a muffled under-car exhaust when the end plates are on.  

    • Fits SBF 289-351W V8 and type "P" cylinder heads.
    • Hookups provided for under-chassis exhaust
    • Block-off plate allows you to easily uncork headers
    • 1-5/8" primary tube diameter
    • 3-1/2" collector cone diameter
    • AHC ceramic coated finish

    Header Dimensions (GIF)

    NOTE: Turn-outs NOT included. Headers come with end plates, but the turn outs are sold seperately.

  • Small Block Chevy Lake Style Headers, Polished Stainless
    Small Block Chevy Lake Style Headers, Polished Stainless
    (Part #9300550S)
    x
                Now available in polished stainless steel! Nostalgia-style street rods are hotter than ever, and nothing gives your vintage rod that authentic dry lakes competition look like a set of lakester headers. These exposed small block Chevy headers work great on rods without hoods, but we’ve also seen them peeking through carefully trimmed hood sides. Each lakester header has a flange so you can connect it to a muffled under-car exhaust when the end plate is on.
    • Fits 265-400 c.i. with standard or Vortec heads including D-port ZZ-4 style heads (not LT-1)
    • 1-5/8" primary
    • Includes flange to connect 2” exhaust pipe
    • Removable end plates allow you to run open headers with ease
    • Headers come with end plates, but the turn-outs are NOT included
    • Includes gaskets and mounting hardware
    Stainless header tubing, when exposed to exhaust temperature, will cause the finish to change color which will vary with the exhaust temperature. Please note that the finish of the header, when the engine is started, will change to a light champagne color or a darker gold finish, and in some instances, may even turn dark blue or purple. These colors can be polished out using Blue-Away or Simi-Chrome polish, but please note that when the headers reach running temperature again, they will immediately change color.
Goto Previous PagePrevious Page
1 2 3 4 5 ... 27