Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Street Rod Electrical Wiring & Lights At Speedway Motors

Speedway Motors is your one stop shop for hot rod wiring and lighting. Make wiring your hot rod simple with easy to use wiring harnesses and step by step instructions. Finally finish off your street rod project with specialty headlights, LED dome lights, and blue dot glass tail lights. Find anything on the online catalog and let Speedway Motors eliminate any and all of your hot rod electrical system problems!

Featured Products
Heavy Duty Turn Signal Switch
Heavy Duty Turn Signal Switch
SKU-91062860
x
            

For early autos not equipped with right and left turn signals. Chrome plated finish. Switch works with 6 or 12 volt systems. Includes wiring diagram. Clamps to any steering column with included stainless hose clamp. Switch has four-way flashers and does not self cancel.

You will need to purchase a three-prong flasher to use with this switch (part number 910-64046). For LED light applications, you will also need a LED dummy load resistor (part number 910-03030).

910-62860 Instructions (PDF)

1928-1931 Ford Model A Stainless Tail Lights
1928-1931 Ford Model A Stainless Tail Lights
SKU-91127001
x
            

Polished stainless steel housing with glass lenses. An excellent replacement or addition to your Model 'A' Ford. Left tail light has lenses on the bottom to illuminate a license plate. Choose left or right. 12 volt operation.

  • 3.851" diameter
  • 3" depth
  • 3.851" height
  • 1-3/4" mount 

Wire colors:

  • Housing - Ground
  • Tail - Black
  • Stop - Green

These tail lights have two bulbs in them that are of a single filament style. 

LED Cat Eye Tail Light
$39.99
Product Rating: 4.73 Stars
LED Cat Eye Tail Light
SKU-91137035
x
            

This 12-volt, 12-LED tail light can be used as a stop/turn/tail or just use as a third stop light. Measures 7.25" long x 1-50" tall x .730" thick with a chrome bezel. Light is flat on the back side and comes with a mounting gasket.

10-32 mounting bolts (not) included.

LED Cat Eye Tail Light Installation Instructions (PDF) 

Power Window Kit
$149.99
Product Rating: 4.75 Stars
Power Window Kit
SKU-91123333
x
            
  • Kit for 2 doors
  • Works for all flat glass windows
  • Straight up and down travel only
  • 6"-24" Glass height
  • Includes: Switches, wiring and crossover kit

Instructions (PDF)

"Street Rod, Electrical, Lighting and Body" Page 1 of 18

  • Lokar SG-6009 Chrome Dimmer Switch Cover, Chevy/Ford
    Lokar SG-6009 Chrome Dimmer Switch Cover, Chevy/Ford
    SKU-4916009
    x
                Brighten up that old dimmer switch with one of these new dimmer switch covers from Lokar!  Made from steel and feature a beautiful chrome finish and a textured rubber pad. 
            
  • DEi 030305 Lite N Boltz LED Bolts, Amber
    DEi 030305 Lite N Boltz LED Bolts, Amber
    SKU-91068003
    x
                

    Available in five different colors, these LED stainless steel button head bolts can be used for anything imaginable. These can be used on the interior or exterior and are compact enough to put anywhere. Sold per pair and have 5/16"-18 x 3/4" threads. 12 volt. Has a 9/16" O.D.

    Useful as:

    • Map and gauge lights
    • Indicator signals
    • Step illumination
    • Engine compartment lighting
    • Running boards
    • Truck bed rails
    • Dashboard accent lights

    Product FAQ's (PDF)

  • Modern Driveline Reverse Switch Harness for GM T5, T56 Transmissions
    Modern Driveline Reverse Switch Harness for GM T5, T56 Transmissions
    SKU-91070002
    x
                

    These harnesses for transmission neutral safety switch/reverse light switches are designed for use with GM T5 and T56 transmissions.

    • Factory style
    • For GM T5 and T56 transmissions

     

  • 1954 Chevy Park Light Lens, Amber
    1954 Chevy Park Light Lens, Amber
    SKU-9115400
    x
                These amber parking light lens for 1954 Chevy passenger cars feature  original   style lens pattering. They fit the factory housing    and are  a direct   replacement for your old damaged or missing park light    lens. 
    • Amber plastic lens with original style lens patterning 
    • Fits factory housing
    • Left or Right Side
    • Fits All Passenger Cars
    • Sold each
  • 1933-34 Ford Car, 1935-37 Ford Truck Headlight Mount Pads
    1933-34 Ford Car, 1935-37 Ford Truck Headlight Mount Pads
    SKU-7514013130
    x
                

    These headlight mount gasket pads fit '33-'34 Ford passenger cars as well as '35-'37 Ford pickup trucks.  They are rubber construction and are not visible when properly installed.  Use these rubber gaskets to ensure a tight seal.

    • OEM replacements
    • 1933-'34 Ford passenger cars and 1935-'37 Ford pickups
    • Rubber construction
    • Sold as a pair
  • Halogen Tail Light Bulbs, 1157 Offset Mounting Pins
    Halogen Tail Light Bulbs, 1157 Offset Mounting Pins
    SKU-91131016
    x
                

    Those other super bright, super high powered tail light bulbs may be easy to see, but they also generate enough heat to discolor your lens and burn the paint.

    Halogen tail light bulbs are brighter than standard bulbs, but use less energy, which means they burn cooler. 12 volt only.

    This bulb is shorter than a 1157 bulb and measures only 1-3/4" from bottom to end of the tip. From the pin to tip is 1-1/2".



     

  • Tall Model T Cowl-Tail Lights, Black
    Tall Model T Cowl-Tail Lights, Black
    SKU-91117400
    x
                

    Features a 12 volt dual element bulb and can be used as a tail light or a cowl light. 9-1/2" tall with 3" diameter lens. Specify red or amber lens.

    Note: Mount bracket is NOT included. Lens must be secured in place with silicone (see Instructions).

    Cowl Light Installation Instructions (PDF)

  • 1932 Ford Stainless Tail Lights
    From: $29.99
    Product Rating: 4.67 Stars
    1932 Ford Stainless Tail Lights
    SKU-91137005
    x
                

    These are an exact duplicate of the original 1932 Ford glass lens tail lights. Left light has a lens to illuminate license plate. Choose left or right.

    • 12 volt bulb
    • Highly polished stainless steel housing & rim
    • Cloth braided wire loom
    • Stainless steel screws
    • Glass red lens
    • 3-7/8" diameter, 2-3/8" depth
    • 2-11/16" overall depth (includes the wire retainer on the back of the lamp)

     

  • Stewart Warner 279B-F Deluxe Electrical Oil Pressure Sender
    Stewart Warner 279B-F Deluxe Electrical Oil Pressure Sender
    SKU-665279B
    x
                

    Designed to make sure that you get fast, accurate information from your Stewart Warner gauges. 

    • 1/8-27 NPT
    • Electrical
    • Designed to be used with 90° sweep gauges
  • 1949-1950 Chevy Chrome Tail Light Bezel with Red Reflector
    1949-1950 Chevy Chrome Tail Light Bezel with Red Reflector
    SKU-91149502
    x
                These tail light bezels for 1949-1950 Chevy passenger cars replicate those of the original. They feature a chrome plated finish and the original style red reflectors. 
    • Chrome plated steel bezel
    • Has original style red reflector with "GUIDE" script
    • Duplicate of original
    • Left or Right Side
    • Fits All Passenger Cars
  • Fuse Block for Glass Fuses
    $9.99
    Product Rating: 5.00 Stars
    Fuse Block for Glass Fuses
    SKU-91064004
    x
                

    Allows easy installation of extra fuses or for use in basic electrical systems. Accepts 7 glass fuses. Also included is two connector strips, one ties three fuses to a common power source and one ties two fuses to a common power source.

  • MSD 8183 2-Pin Deutsch Connector, 16 gauge
    New
    MSD 8183 2-Pin Deutsch Connector, 16 gauge
    SKU-5478183
    x
                There is absolutely no excuse for losing a race due to a poor wiring connection. MSDs Deutsch Connectors are sealed and lock together making them perfect for harsh racing applications. The compact housing of the connectors are molded from a durable plastic material that will not harden or crack. Each housing is indexed to prevent any chance of mismatching the ends plus they have a molded channel to secure another connector for a tidy appearance.The terminals grip to the wire with strong crimp tabs then lock into position inside the housing. The connections are protected with thick seals that will keep water, mud and debris away from the contacts. These terminals can handle more current than conventional connectors and do not require special tools. Supplied with terminals, seals and housings.

    Installation Instructions (PDF)

  • Lokar CC-1600U Carbureted Cruise Control Cable, Black
    Lokar CC-1600U Carbureted Cruise Control Cable, Black
    SKU-491CC1600U
    x
                
    • Lokar cruise control cable is for use with Rostra control kits. Kit includes 4 foot stainless outer housing designed with a specialty extruded liner for extended life of the cable and 5 feet of stainless inner wire, which replaces black plastic cable in Rostra kits. Cables are u-cut-to-fit inside and outside of the firewall. All billet aluminum fittings, stainless hold down clip and mounting bracket. Mount cable to carburetor with Lokar's stainless carburetor bracket and return springs.
    • For Use w/Rostra Control Kits
    • Stainless Housing
    • 5 in. Stainless Inner Wire/4 in. Outer Housing
    • U-Cut-To-Fit Inside And Outside Of Firewall
    • Billet Aluminum Fittings
    • Incl. Hold Down Clip/Mounting Bracket
    • Made In The U.S.A.
    • Lifetime Warranty
  • Speedway 7 Inch Fluted Replacement Headlights w/ Amber Turn Signal
    Speedway 7 Inch Fluted Replacement Headlights w/ Amber Turn Signal
    SKU-9106121
    x
                

    Speedway's 7" replacement Fluted H4 Headlights allow you to have "the look" with out breaking the bank. Features a chrome plated plastic reflector with a glass lens and an "amber" turn signal lens. Includes a H4 Halogen bulb.

    These headlights have a separate 94-style single filament bulb which can be used as a turn signal or a running lamp (not both). 

    • 6-5/8" headlight O.D.
    • Wiring pigtail for turn/running light is included
    • Wiring pigtail for headlight NOT included
    • Uses common 3-prong headlight plug-in

    Headlight Wiring Chart (GIF)

    Installation Instructions (PDF)  

  • Stewart Warner 82623B GM Sender for Wings Electronic Speedometer
    Stewart Warner 82623B GM Sender for Wings Electronic Speedometer
    SKU-66582623B
    x
                

    This sending unit for electronic speedometers has a .894" (7/8”) female attachment nut to attach it to the transmission or out-drive unit.  This is similar to the female threaded ring on mechanical speedometer cables. Most customers will need to purchase part number 66582629, square drive tip, to attach this sender to a GM transmission.

  • 1928-29 Dropped Stainless Headlight Bars
    1928-29 Dropped Stainless Headlight Bars
    SKU-91121803
    x
                1928-1929 Dropped style stainless steel headlight bars. Polished. 

    Top width (flange tip to flange tip) 42-1/2"
    Bottom width (flange tip to flange tip) 38-1/2"
  • MSD 8961 MSD High Current Relay, SPST
    $26.99
    $29.99
    New
    MSD 8961 MSD High Current Relay, SPST
    SKU-5478961
    x
                MSDs High Current Relays are what you need to activate accessories that draw high current. These Relays are very reliable due to the fully automated manufacturing process and sophisticated coil winding procedure. The SPST High Current Relay is rated at 30 amps with an input voltage of 12 volts DC. The relay is ideal for use with the MSD RPM Activated Switch when 12 volts are responsible for activating a high current device such as a nitrous solenoid.The DPST relay is also rated at 30 amps with a 12 volt input voltage. This Relay is the best choice when 12 volts are required to activate multiple high current devices at the same time such as multiple stage nitrous solenoids.

    Installation Instructions (PDF)

  • MSD 8190 10 Male Pins and Seals
    $8.99
    $9.99
    New
    MSD 8190 10 Male Pins and Seals
    SKU-5478190
    x
                Male pins and seals for use with Weathertight Connectors.
            
  • 1928-29 Model A Style Headlights
    1928-29 Model A Style Headlights
    SKU-91121011
    x
                Available in polished stainless steel. 12 volt bulb is mounted behind original style lens. Complete with mounting stud. 9" diameter. Stainless with Halogen bulb. 
            
  • MSD 8187 4-Pin Deutsch Connector, 12-14 gauge
    New
    MSD 8187 4-Pin Deutsch Connector, 12-14 gauge
    SKU-5478187
    x
                There is absolutely no excuse for losing a race due to a poor wiring connection. MSDs Deutsch Connectors are sealed and lock together making them perfect for harsh racing applications. The compact housing of the connectors are molded from a durable plastic material that will not harden or crack. Each housing is indexed to prevent any chance of mismatching the ends plus they have a molded channel to secure another connector for a tidy appearance.The terminals grip to the wire with strong crimp tabs then lock into position inside the housing. The connections are protected with thick seals that will keep water, mud and debris away from the contacts. These terminals can handle more current than conventional connectors and do not require special tools. Supplied with terminals, seals and housings.

    Installation Instructions (PDF)

    • Sealed Connectors
  • MSD 8184 2-Pin Deutsch Connector, 12-14 gauge
    New
    MSD 8184 2-Pin Deutsch Connector, 12-14 gauge
    SKU-5478184
    x
                There is absolutely no excuse for losing a race due to a poor wiring connection. MSDs Deutsch Connectors are sealed and lock together making them perfect for harsh racing applications. The compact housing of the connectors are molded from a durable plastic material that will not harden or crack. Each housing is indexed to prevent any chance of mismatching the ends plus they have a molded channel to secure another connector for a tidy appearance.The terminals grip to the wire with strong crimp tabs then lock into position inside the housing. The connections are protected with thick seals that will keep water, mud and debris away from the contacts. These terminals can handle more current than conventional connectors and do not require special tools. Supplied with terminals, seals and housings.

    Installation Instructions (PDF)

    • Waterproof
    • Quick Connect
  • MSD 8910 Tach Adapter
    $42.99
    $50.99
    New
    MSD 8910 Tach Adapter
    SKU-5478910
    x
                If, after installing an MSD Ignition Control, your ta�chometer, fuel pump relay or electronic fuel injection (in foreign vehicles) doesnt operate correctly, your ap�plication may require a Tach Adapter. This is due to the trigger signal not being strong enough to trigger both the MSD and the factorys components.There are a few Tach Adapters available and for more information see pages 152 and 153. Each Adapter is simple to wire in and will have your MSD and vehicle firing away in no time! If you are triggering an MSD Blaster, 5, 6, SCI, or 7 Series Ignition with its white wire or points terminal, you will need the PN 8910 Tach Adapter. The PN 8910 will correct the operation of most voltage-triggered tachometers or fuel injection systems that do not work directly off the tach output terminal of the MSD Ignition Unit.

    Installation Instructions (PDF)

    Installation Instructions (PDF)

    • Lokar SP-1503HT Ford Speedometer Drive Cable Kit, Stainless
      Lokar SP-1503HT Ford Speedometer Drive Cable Kit, Stainless
      SKU-491SP1503HT
      x
                  

      The finishing touch to your mechanical (cable-drive) speedometer installation in your Ford. Kit includes a 7 ft. long braided stainless steel housing and 7' inner cable (you trim to length), billet aluminum fitting ends and instructions.

      Works with all cable-drive aftermarket and original equipment speedometers that have a male 5/8"-18 threaded connection. The transmission end has the standard Ford end with retaining clamp.

    • Lokar SP-1506U Early Ford Speedo Cable Kit w/Ford End, Black Housing
      Lokar SP-1506U Early Ford Speedo Cable Kit w/Ford End, Black Housing
      SKU-491SP1506U
      x
                  Premium housing designed with a specially extruded liner for extended life of the cable and billet aluminum fittings. Inner cable and outer housing are "U-Cut-to-Fit". Kit comes complete with all fittings and is available for GM, Ford and Chrysler applications. (Gauges not included)
      Lokar Speedometer Cables are designed to work with most cable driven aftermarket speedometer gauges (such as Auto Meter, Stewart Warner, VDO, Classic Instruments, etc.) or factory speedometer.
      Lokar Speedometer Cables are designed to fit into the transmission gear adapter (not supplied in Chevy or Chrysler Lokar Kit). Customer must have the trans end adapter and speedometer gear for all Chevy and Chrysler applications. For Ford applications, the gear adapter is supplied in the Lokar Kit. Customer must supply the speedo gear and speedo gear retainer clip.
      • All Lokar Speedometer Cables are seven feet (7') long
      • Designed to be "U-Cut-to-Fit".
      • Additional length cable in black or stainless housing is available upon request for an additional charge.
      • Must have a 3/4 - 20 female thread at the speedometer
    • DEi 030304 Lite N Boltz LED Bolts, Red
      DEi 030304 Lite N Boltz LED Bolts, Red
      SKU-91068001
      x
                  

      Available in five different colors, these LED stainless steel button head bolts can be used for anything imaginable. These can be used on the interior or exterior and are compact enough to put anywhere. Sold per pair and have 5/16"-18 x 3/4" threads. 12 volt. Has a 9/16" O.D.

      Useful as:

      • Map and gauge lights
      • Indicator signals
      • Step illumination
      • Engine compartment lighting
      • Running boards
      • Truck bed rails
      • Dashboard accent lights

      Product FAQ's (PDF)

    • Lokar XBAG-6109 Midnight Series Oval Billet Aluminum Dimmer Cover
      Lokar XBAG-6109 Midnight Series Oval Billet Aluminum Dimmer Cover
      SKU-491XBAG6109
      x
                  
      • Oval Billet Aluminum Dimmer Cover – Brushed
      • Black Anodized Billet Aluminum 
      • Made In The U.S.A.

       

    • 1930-31 Ford Model A Dropped Headlight Bar Kit, Stainless
      1930-31 Ford Model A Dropped Headlight Bar Kit, Stainless
      SKU-91121810
      x
                  Get everything you need to complete your  dropped headlight bar installation with this convenient kit!  All for  one money saving price.

      Includes:
      • 911-21809 - Stainless Headlight Bar
      • 751-A13130BS - Rubber mounting pads
      • 751-A13130SS - Hardware kit
    • Universal Headlight Mount
      $19.99
      Product Rating: 4.00 Stars
      Universal Headlight Mount
      SKU-91061026
      x
                  
      • 5/16" mounting holes 2" center to center
      • 1/2" ID sleeve for light mounting bolt
      • Great for headlights and taillights
      • Use with mounting cups 91061034
    • 1932 Ford Tail Light LED Conversion Lens
      1932 Ford Tail Light LED Conversion Lens
      SKU-91137026
      x
                  These direct replacement tail light lenses will convert your 1932 Ford Deuce tail lights to powerful and bright LED lights. Choose left or right sides.
      • 17 Super Bright Red LEDs
      • Drivers side (Left side) includes a 4 LED White License Light (primary picture)
      • Epoxy coated, fully sealed electronics
      • Two 1156 plugs
      • Solid state circuit board for 12V systems 
      1932 Ford LED Tail Light Conversion Instructions (pdf)
    • 1942-1948 Ford Car Tail Lights
      1942-1948 Ford Car Tail Lights
      SKU-91137019
      x
                  

      Duplicate of original 1942-1948 Ford passenger car taillights with polished stainless steel housings complete with red glass lens. Uses a single 1157 dual filament bulb (included). Mounting gasket NOT included.

      • Highly polished stainless steel housing & rim
      • Cloth braided wire loom
      • 12 volt bulb
      • Red glass lens
    • 1937-1938 Chevy Blue Dot Tail Light Lens, Passenger Car
      1937-1938 Chevy Blue Dot Tail Light Lens, Passenger Car
      SKU-91062191
      x
                  

      These red glass tail light lens are replacements for your 1937-1938 Chevy passenger car.  They feature the classic Lynx-Eye blue dot in the center.

      • Original replacements
      • 1937-1938 Chevy passenger car only
      • Classic Lynx-Eye blue dot in center
      • Red glass lens
      • Sold each
    • Safety Kill Switch
      $19.99
      Product Rating: 4.50 Stars
      Safety Kill Switch
      SKU-91364384
      x
                  

      This is the best kill switch we've found! Works with standard ignition only. Water resistant with O-ring shaft seal. Pull on, push off with silver contacts.

      20 amp rating at 12 VDC.

    • MSD 8180 6- Pin Deutsch Connector, 16 gauge
      New
      MSD 8180 6- Pin Deutsch Connector, 16 gauge
      SKU-5478180
      x
                  There is absolutely no excuse for losing a race due to a poor wiring connection. MSDs Deutsch Connectors are sealed and lock together making them perfect for harsh racing applications. The compact housing of the connectors are molded from a durable plastic material that will not harden or crack. Each housing is indexed to prevent any chance of mismatching the ends plus they have a molded channel to secure another connector for a tidy appearance.The terminals grip to the wire with strong crimp tabs then lock into position inside the housing. The connections are protected with thick seals that will keep water, mud and debris away from the contacts. These terminals can handle more current than conventional connectors and do not require special tools. Supplied with terminals, seals and housings.

      Installation Instructions (PDF)

      • Waterproof
      • Heat Shrinkable
      • Battery Quick Disconnects
      • Special Tools
      • Perma-Seal
      • Weather Pack
      • Deutsch
      • Quick Connect
    • MSD 8956 Window RPM Activated Switch
      $87.99
      $112.99
      New
      MSD 8956 Window RPM Activated Switch
      SKU-5478956
      x
                  These RPM-Activated Switches will perform a variety of different functions from turning on a bulb or solenoid to activating an MSD Timing Control at a desired rpm.The RPM-Activated Switch, PN 8950, has two activation wires; one to ground a circuit and the other to open a circuit. Simply plug in an rpm module and wire the Switch to the circuit you want to activate. When the engine rpm reaches that amount, the circuit is activated and will remain on until the rpm falls below that amount.The RPM Window Switch, PN 8956, has two rpm adjustments; one to activate a circuit, while the other deactivates the same circuit. This Switch will supply then remove ground to a circuit. This is a great feature to deactivate nitrous before the engines rev limit is reached. Both Switches can be used with stock inductive ignitions or an MSD Ignition and can handle up to 1.5 amps. No rpm modules are supplied so they must be ordered from the selection of Modules shown here. For use on 4, 6, or 8-cylinder engines.

      Installation Instructions (PDF)

      • 2 RPM Adjustments
      • Activate a circuit
      • Deactivate a circuit
    • Speedway 2005-2006 LS2/4L65E Wiring Harness, Extended
      Speedway 2005-2006 LS2/4L65E Wiring Harness, Extended
      SKU-91050064
      x
                  

      Take the fear out of electronic fuel injection! These engine wiring harnesses are designed to make your engine transplant effortless. Each new harness contains in-depth application-specific instruction sheets, clearly marked factory GM connectors, labeled GXL jacketed wire, GM color coding, and pre-fitted corrugated slit loom for an extra value and professional look. All un-needed emissions wiring is eliminated to make the install as simple and reliable as possible.

      2005-2006 LS2/E40 24X Reluctor and 4L65E Transmission

      • Made from premium grade GXL jacketed automotive wire
      • Most wiring is larger gauge than stock application for durability
      • No splices to reduce points of failure
      • All primary grounding is done at the head or block and grounding points are isolated from each other to reduce electrical interference and minimize ground looping
      • Harness wiring matches GM wiring configuration and jacket colors follow GM color coding for easy identification
      • All electrical connectors are made by Delphi or Packard and are direct fit for GM cars and trucks
      • Can be installed to run engine in 20 minutes, but figure 4-6 hours for a professional installation
      • Diagnostic connector or OBD2 port for connection to scanners and tuning tools
      • Made in the USA.
    • Billet Specialties 32121 Standard Horn Button - No Logo
      Billet Specialties 32121 Standard Horn Button - No Logo
      SKU-91013246
      x
                    
      • Precision machined 6061-T6 billet aluminum
      • Fully polished
      • Stainless internal hardware
    • 1940 Ford Red Glass Tail Light Lens, Passenger Car
      1940 Ford Red Glass Tail Light Lens, Passenger Car
      SKU-91062179
      x
                  

      Replace those old, cracked, or missing tail lights with these reproduction red glass lens.  They are replacement tail light lens for your 1940 Ford passenger car.

      • Original reproduction
      • 1940 Ford passenger car only
      • Red glass lens
      • Sold each

       

       

    • 1932 Ford Tail Light Bracket, Chrome
      1932 Ford Tail Light Bracket, Chrome
      SKU-91137004
      x
                  

      These 1932 Ford tail light brackets are stamped steel reproductions. They feature a beautiful chrome plated finish. Choose left or right side.

      • 1932 Ford passenger cars
      • Chrome plated finish
      • Stamped steel reproductions
      • Specify left or right side
    • 1938-1939 Ford Blue Dot Tail-Stop Lights
      1938-1939 Ford Blue Dot Tail-Stop Lights
      SKU-91137016
      x
                  

      Polished stainless steel rim taillights for 1938-1939 Ford. These taillights have a blue dot glass lens, single 1157 dual filament bulb, and match the original tail lights closely.

      For 12 volt systems only. Mounting gasket sold separately.

       

    • Tall Model T Cowl-Tail Lights - Chrome
      Tall Model T Cowl-Tail Lights - Chrome
      SKU-91117401
      x
                  

      Fully spun, chrome steel. Model T style cowl light is 9-1/2" tall with 3-1/2" diameter lens. Dual element bulb. Available with amber or red lens. 12 volts.

      Note: Mount bracket is NOT included. Lens must be secured in place with silicone (see Instructions).

       

      Model T Tail Light Assembly Instructions (pdf)


    Goto Previous PagePrevious Page
    1 2 3 4 5 ... 18