Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 36

Products

Electrical, Lighting and Body

Shop Street Rod Electrical Wiring & Lights At Speedway Motors

Speedway Motors is your one stop shop for hot rod wiring and lighting. Make wiring your hot rod simple with easy to use wiring harnesses and step by step instructions. Finally finish off your street rod project with specialty headlights, LED dome lights, and blue dot glass tail lights. Find anything on the online catalog and let Speedway Motors eliminate any and all of your hot rod electrical system problems!

Featured Products
  • Speedway Universal 20 Circuit Wiring Harness
    Speedway Universal 20 Circuit Wiring Harness
    (Part #91064027)
    x
                Whether you're building an option loaded car or just want to have extra circuits available for future updates, this harness is perfect and makes any job painless. Compact 5-1/2"L x 4-1/2"W x 3-1/4"H  fuse block holds 18 standard push-in fuses and can be mounted almost anywhere. 

    Each high temperature wire is color coded and labeled every six inches. Also includes GM type steering column connectors. To keep costs down and the quality high, this harness does not include any switches, light sockets or plugs that you would normally already have.

    • Harness has 20 circuits, of which 18 are fused
    • Taillight leads measure 17' long
    • Includes plug for GM column, headlight switch, dimmer switch, and signal flashers

    Wiring Harness Installation Instructions (PDF)

    Note: This kit includes ribbon plugs to connect to most GM and aftermarket columns, in addition to including plugs to connect to the ignition switch on "keyed" GM columns.

  • Lokar CCP-1603HT Tuned-Port Cut-To-Fit Cruise Control Cable, Stainless
    Lokar CCP-1603HT Tuned-Port Cut-To-Fit Cruise Control Cable, Stainless
    (Part #491CCP1603HT)
    x
                Lokar cruise control cable is for use with Rostra control kits. Kit includes 4 foot stainless outer housing designed with a specialty extruded liner for extended life of the cable and 5 feet of stainless inner wire, which replaces black plastic cable in Rostra kits. Cables are u-cut-to-fit inside and outside of the firewall. All billet aluminum fittings, stainless hold down clip and mounting bracket. Mount cable to carburetor with Lokar's stainless carburetor bracket and return springs.
    • For Use w/Rostra Control Kits
    • Stainless Steel Housing
    • 5 in. Stainless Inner Wire/4 in. Outer Housing
    • U-Cut-To-Fit Inside And Outside Of Firewall
    • Billet Aluminum Fittings
    • Made In The U.S.A.
    • Lifetime Warranty
  • Power Window Kit
    $149.99
    Product Rating: 4.80 Stars
    Power Window Kit
    (Part #91123333)
    x
                
    • Kit for 2 doors
    • Works for all flat glass windows
    • Straight up and down travel only
    • 6"-24" Glass height
    • Includes: Switches, wiring and crossover kit

    Instructions (PDF)

  • Tridon Replacement Turn Signal Flasher Unit, 3-Prong
    Tridon Replacement Turn Signal Flasher Unit, 3-Prong
    (Part #91064046)
    x
                

    These state-of-the-art electronic flashers work with standard bulbs. 12 volt operation (will not work on 6 volt systems). Made in the U.S.A.

    • Replacement for turn signal
    • Works with standard bulbs
    • 12 volt operation only
    • 3-Prong
    • Made in the U.S.A.

    Flasher function:

    • The X terminal is the + 12v input
    • The P terminal output drives the flasher indicator
    • The L terminal drives the load (bulbs)

    Note: We recommend the use of our grounded LED flashers for use with LED's (910-64112 3-prong).

  • MSD 8174 1-Pin Weathertight Connector, 1 qty
    MSD 8174 1-Pin Weathertight Connector, 1 qty
    (Part #5478174)
    x
                If you need electrical connectors that are unaffected by water, chemicals, vibration, temperature or dirt, and that will not come apart accidentally, then you need MSD Weathertight Connectors.The Weathertight connectors are molded from a special nylon material to withstand temperatures from -40° to +257°F and are indexed to prevent mismatching. Positive locks let you know when the connectors are completely joined by producing an audible CLICK. No click means no connection.For maximum electrical isolation, each terminal has its own tower so there is no chance of shorting between the wires. Each terminal tower utilizes self-lubricating silicone seals for protection against water, dust, oil, and other engine compartment fluids.
            
  • LED Flasher Unit, 2-Prong
    $14.99
    Product Rating: 4.27 Stars
    LED Flasher Unit, 2-Prong
    (Part #91064110)
    x
                

    The technology of LED replacement blubs has come a long way the last few years. The problem is that they have gotten so efficient, that even electronic flashers that once worked, now don't. So now we offer a new flasher made specifically for LED bulbs. These flashers do not need a grounded connection. 

  • MSD 8969 Digital RPM Window Switch
    $158.99
    $186.99
    MSD 8969 Digital RPM Window Switch
    (Part #5478969)
    x
                Are you looking for an RPM Switch that will turn a circuit on, then off at a different rpm? How about one for your late model coil-per-cylinder ignition system? Or, something for your car with dual coil packs? Maybe one for a Viper or even a Harley Davidson? Look no further, our new Digital RPM Window Switch will do it all! This Switch will accept an input rpm signal from a coil negative terminal (for stock ignitions), a tach output from an ignition control, an ECU tach output or even a 5 volt tach signal. Another great feature is that no rpm modules are needed! The rpm activation points are programmed by simply scrolling through the LED display to your desired rpm amounts.The switch has two outputs; one Normally Open, the other is Normally Closed. It can be programmed from 200 rpm to 15,000 rpm in 100 rpm increments. It can be used with an input voltage of 9-18 volts.

    Installation Instructions (PDF)

    • Works on Coil-per-Cylinder applications
    • No modules needed!
  • 1928-1931 Ford Model A Stainless Tail Lights
    1928-1931 Ford Model A Stainless Tail Lights
    (Part #91127001)
    x
                

    Polished stainless steel housing with glass lenses. An excellent replacement or addition to your Model 'A' Ford. Left tail light has lenses on the bottom to illuminate a license plate. Choose left or right. 12 volt operation.

    • 3.851" diameter
    • 3" depth
    • 3.851" height
    • 1-3/4" mount 

    Wire colors:

    • Housing - Ground
    • Tail - Black
    • Stop - Green

    These tail lights have two bulbs in them that are of a single filament style. 

Filter

"Street Rod, Electrical, Lighting and Body" Page 1 of 36

Page 1 of 36

  • Lokar SG-6009 Chrome Dimmer Switch Cover, Chevy/Ford
    Lokar SG-6009 Chrome Dimmer Switch Cover, Chevy/Ford
    (Part #4916009)
    x
                Brighten up that old dimmer switch with one of these new dimmer switch covers from Lokar!  Made from steel and feature a beautiful chrome finish and a textured rubber pad. 
            
  • DEi 030305 Lite N Boltz LED Bolts, Amber
    DEi 030305 Lite N Boltz LED Bolts, Amber
    (Part #91068003)
    x
                

    Available in five different colors, these LED stainless steel button head bolts can be used for anything imaginable. These can be used on the interior or exterior and are compact enough to put anywhere. Sold per pair and have 5/16"-18 x 3/4" threads. 12 volt. Has a 9/16" O.D.

    Useful as:

    • Map and gauge lights
    • Indicator signals
    • Step illumination
    • Engine compartment lighting
    • Running boards
    • Truck bed rails
    • Dashboard accent lights

    Product FAQ's (PDF)

  • Modern Driveline Reverse Switch Harness - GM T5, T-56 Transmissions
    Modern Driveline Reverse Switch Harness - GM T5, T-56 Transmissions
    (Part #91070002)
    x
                

    These harnesses for transmission neutral safety switch/reverse light switches are designed for use with GM T5 and T56 transmissions.

    • Factory style
    • For GM T5 and T56 transmissions

     

  • 1954 Chevy Park Light Lens, Amber
    1954 Chevy Park Light Lens, Amber
    (Part #9115400)
    x
                These amber parking light lens for 1954 Chevy passenger cars feature  original   style lens pattering. They fit the factory housing    and are  a direct   replacement for your old damaged or missing park light    lens. 
    • Amber plastic lens with original style lens patterning 
    • Fits factory housing
    • Left or Right Side
    • Fits All Passenger Cars
    • Sold each
  • 1933-34 Ford Car, 1935-37 Ford Truck Headlight Mount Pads
    1933-34 Ford Car, 1935-37 Ford Truck Headlight Mount Pads
    (Part #7514013130)
    x
                

    These headlight mount gasket pads fit '33-'34 Ford passenger cars as well as '35-'37 Ford pickup trucks.  They are rubber construction and are not visible when properly installed.  Use these rubber gaskets to ensure a tight seal.

    • OEM replacements
    • 1933-'34 Ford passenger cars and 1935-'37 Ford pickups
    • Rubber construction
    • Sold as a pair
  • Halogen Tail Light Bulbs, 1157 Offset Mounting Pins
    Halogen Tail Light Bulbs, 1157 Offset Mounting Pins
    (Part #91131016)
    x
                

    Those other super bright, super high powered tail light bulbs may be easy to see, but they also generate enough heat to discolor your lens and burn the paint.

    Halogen tail light bulbs are brighter than standard bulbs, but use less energy, which means they burn cooler. 12 volt only.

    This bulb is shorter than a 1157 bulb and measures only 1-3/4" from bottom to end of the tip. From the pin to tip is 1-1/2".



     

  • Tall Model T Cowl-Tail Lights, Black
    Tall Model T Cowl-Tail Lights, Black
    (Part #91117400)
    x
                

    Features a 12 volt dual element bulb and can be used as a tail light or a cowl light. 9-1/2" tall with 3" diameter lens. Specify red or amber lens.

    Note: Mount bracket is NOT included. Lens must be secured in place with silicone (see Instructions).

    Cowl Light Installation Instructions (PDF)

  • 1932 Ford Stainless Tail Lights
    From: $29.99
    Product Rating: 4.67 Stars
    1932 Ford Stainless Tail Lights
    (Part #91137005)
    x
                

    These are an exact duplicate of the original 1932 Ford glass lens tail lights. Left light has a lens to illuminate license plate. Choose left or right.

    • 12 volt bulb
    • Highly polished stainless steel housing & rim
    • Cloth braided wire loom
    • Stainless steel screws
    • Glass red lens
    • 3-7/8" diameter, 2-3/8" depth
    • 2-11/16" overall depth (includes the wire retainer on the back of the lamp)

     

  • Stewart Warner 279B-F Deluxe Electrical Oil Pressure Sender
    Stewart Warner 279B-F Deluxe Electrical Oil Pressure Sender
    (Part #665279B)
    x
                

    Designed to make sure that you get fast, accurate information from your Stewart Warner gauges. 

    • 1/8-27 NPT
    • Electrical
    • Designed to be used with 90° sweep gauges
  • 1949-1950 Chevy Chrome Tail Light Bezel with Red Reflector
    1949-1950 Chevy Chrome Tail Light Bezel with Red Reflector
    (Part #91149502)
    x
                These tail light bezels for 1949-1950 Chevy passenger cars replicate those of the original. They feature a chrome plated finish and the original style red reflectors. 
    • Chrome plated steel bezel
    • Has original style red reflector with "GUIDE" script
    • Duplicate of original
    • Left or Right Side
    • Fits All Passenger Cars
  • Fuse Block for Glass Fuses
    $9.99
    Product Rating: 5.00 Stars
    Fuse Block for Glass Fuses
    (Part #91064004)
    x
                

    Allows easy installation of extra fuses or for use in basic electrical systems. Accepts 7 glass fuses. Also included is two connector strips, one ties three fuses to a common power source and one ties two fuses to a common power source.

  • MSD 8183 2-Pin Deutsch Connector, 16 gauge
    MSD 8183 2-Pin Deutsch Connector, 16 gauge
    (Part #5478183)
    x
                There is absolutely no excuse for losing a race due to a poor wiring connection. MSDs Deutsch Connectors are sealed and lock together making them perfect for harsh racing applications. The compact housing of the connectors are molded from a durable plastic material that will not harden or crack. Each housing is indexed to prevent any chance of mismatching the ends plus they have a molded channel to secure another connector for a tidy appearance.The terminals grip to the wire with strong crimp tabs then lock into position inside the housing. The connections are protected with thick seals that will keep water, mud and debris away from the contacts. These terminals can handle more current than conventional connectors and do not require special tools. Supplied with terminals, seals and housings.

    Installation Instructions (PDF)

  • Painless Wiring 50302 6-Switch Fused Panel with Wiring and Hardware
    Painless Wiring 50302 6-Switch Fused Panel with Wiring and Hardware
    (Part #91050302)
    x
                

    This heavy duty lightweight switch panel from Painless Performance is designed to mount to a roll bar using standard metal hose clamps. Lighted rocker switches are color coded for quick reference.  All of the circuits are individually fused and are easily accessible for quick testing and replacement. This kit comes complete with 18 ft. of TXL wire, using fully insulated terminals. Made in the USA!

    Installation Instructions (PDF) 

    The Kit Controls:

    • Start
    • Ignition
    • Fuel pump
    • Electric fan/water pump (Switch up position - fan on only / Switch middle position - all off / Switch down position - fan & water pump on)
    • Two accessories

     

     

  • Lokar CC-1600U Carbureted Cruise Control Cable, Black
    Lokar CC-1600U Carbureted Cruise Control Cable, Black
    (Part #491CC1600U)
    x
                
    • Lokar cruise control cable is for use with Rostra control kits. Kit includes 4 foot stainless outer housing designed with a specialty extruded liner for extended life of the cable and 5 feet of stainless inner wire, which replaces black plastic cable in Rostra kits. Cables are u-cut-to-fit inside and outside of the firewall. All billet aluminum fittings, stainless hold down clip and mounting bracket. Mount cable to carburetor with Lokar's stainless carburetor bracket and return springs.
    • For Use w/Rostra Control Kits
    • Stainless Housing
    • 5 in. Stainless Inner Wire/4 in. Outer Housing
    • U-Cut-To-Fit Inside And Outside Of Firewall
    • Billet Aluminum Fittings
    • Incl. Hold Down Clip/Mounting Bracket
    • Made In The U.S.A.
    • Lifetime Warranty
  • Speedway 7 Inch Fluted Replacement Headlights w/ Amber Turn Signal
    Speedway 7 Inch Fluted Replacement Headlights w/ Amber Turn Signal
    (Part #9106121)
    x
                

    Speedway's 7" replacement Fluted H4 Headlights allow you to have "the look" with out breaking the bank. Features a chrome plated plastic reflector with a glass lens and an "amber" turn signal lens. Includes a H4 Halogen bulb.

    These headlights have a separate 94-style single filament bulb which can be used as a turn signal or a running lamp (not both). 

    • 6-5/8" headlight O.D.
    • Wiring pigtail for turn/running light is included
    • Wiring pigtail for headlight NOT included
    • Uses common 3-prong headlight plug-in

    Headlight Wiring Chart (GIF)

    Installation Instructions (PDF)  

  • Painless Wiring 10104 21 Circuit GM Pickup Chassis Wiring Harness
    Painless Wiring 10104 21 Circuit GM Pickup Chassis Wiring Harness
    (Part #91010104)
    x
                

    This customizable 21 circuit - 12 fuse w/ horn relay and Maxi Fuse pickup chassis wiring harness is made from Painless Performance. You'll find that the ample wire lengths make this kit especially suited for trucks with long beds and extended cabs.  These Painless wiring harnesses feature many pre-wired connections and are color coded to make installation a snap. Included with this harness are the following parts: a GM engineered fuse block & Painless mounting bracket, GM turn signal connectors, pre-wire plugs for the headlights, and a dimmer switch. Application intended for non-fuel injected engine and a non-electronic transmission.

    Includes Circuits for:

    • A/C & Heat
    • Accessory / Cigarette Lighter
    • Backup Lights
    • Brake Lights
    • Charging
    • Dome Light
    • Electric Choke
    • Emergency Flashers
    • Fan Relay Activation Power
    • Fused Power Source
    • Headlights
    • Horn (Relay)
    • Ignition Coil
    • Instrument Panel Lighting and Gauges ( Included wires for: fuel gauge, oil gauge, tachometer, temperature gauge, and voltmeter)
    • Park Lights
    • Radio/Clock (Constant and Switched) 
    • Starting
    • Tail Lights
    • Third Brake Light
    • Turn Signals
    • Wipers

    Connectors included:

    • GM Steering Column Turn Switch
    • Two Headlight Pigtails
    • 10SI & 12 SI Alternator
    • Dimmer Switch

  • Stewart Warner 82623B GM Sender for Wings Electronic Speedometer
    Stewart Warner 82623B GM Sender for Wings Electronic Speedometer
    (Part #66582623B)
    x
                

    This sending unit for electronic speedometers has a .894" (7/8”) female attachment nut to attach it to the transmission or out-drive unit.  This is similar to the female threaded ring on mechanical speedometer cables. Most customers will need to purchase part number 66582629, square drive tip, to attach this sender to a GM transmission.

  • 1928-29 Dropped Stainless Headlight Bars
    1928-29 Dropped Stainless Headlight Bars
    (Part #91121803)
    x
                1928-1929 Dropped style stainless steel headlight bars. Polished. 

    Top width (flange tip to flange tip) 42-1/2"
    Bottom width (flange tip to flange tip) 38-1/2"
  • MSD 8961 MSD High Current Relay, SPST
    MSD 8961 MSD High Current Relay, SPST
    (Part #5478961)
    x
                MSDs High Current Relays are what you need to activate accessories that draw high current. These Relays are very reliable due to the fully automated manufacturing process and sophisticated coil winding procedure. The SPST High Current Relay is rated at 30 amps with an input voltage of 12 volts DC. The relay is ideal for use with the MSD RPM Activated Switch when 12 volts are responsible for activating a high current device such as a nitrous solenoid.The DPST relay is also rated at 30 amps with a 12 volt input voltage. This Relay is the best choice when 12 volts are required to activate multiple high current devices at the same time such as multiple stage nitrous solenoids.

    Installation Instructions (PDF)

  • MSD 8190 10 Male Pins and Seals
    MSD 8190 10 Male Pins and Seals
    (Part #5478190)
    x
                Male pins and seals for use with Weathertight Connectors.
            
Goto Previous PagePrevious Page
1 2 3 4 5 ... 36