Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Street Rod Brakes At Speedway Motors

Nobody knows street rod brakes like Speedway Motors! With the most experience in the business, you can be assured that you are getting quality hot rod brake components for the most critical part of your car. Speedway has disc brake kits and brake calipers for all types of street rods, classic Chevy and Ford trucks, and all the popular muscle cars. We also have a huge selection of master cylinders, brake boots, brake pedals, plus the brake lines, fittings and proportioning valves you need to complete any brake system replacement, rebuild, or upgrade.

"Street Rod, Disc Brakes and Accessories" Page 1 of 16

  • Wilwood 140-11743 NDP Radial Mount Front Brake Kit, Sunbeam Tiger
    New
    Wilwood 140-11743 NDP Radial Mount Front Brake Kit, Sunbeam Tiger
    (Part #83514011743)
    x
                Radial mounting provides secure and accurate installation of the Forged Billet Narrow DynaPro four piston caliper with large diameter rotors for this group of rear wheel drive sport compacts. These kits are the perfect compliment to wheel, tire, and suspension upgrades on daily drivers &, competition vehicles. This kit is engineered specific for 64-67 Sunbeam Tiger to maintain full compatibility with the OE spindle. Forged aluminum 4 bolt hubs and hats round out the assembly. Optional caliper finishes and rotor designs provide choices that enable the builder to personalize the style and optimize brake performance.

    Installation Instructions (PDF)

  • Wilwood 140-7140-DP FDL Rear Brake Kit, New Big Ford 2.50 Off
    New
    Wilwood 140-7140-DP FDL Rear Brake Kit, New Big Ford 2.50 Off
    (Part #8351407140DP)
    x
                This group of FDL Pro-Series rear disc kits provides a complete solution for popular muscle car rear axles that require a parking brake. Forged billet Dynalite four piston calipers, 12.19"  one-piece drum/rotors, and high friction pads provide optimized and balanced braking for all types of custom performance street/strip and show machines. The neatly hidden internal shoe system provides a clean installation with superior static holding power for parking. Optional caliper finishes and rotor designs enable the builder to personalize the style and optimize brake performance for every individual application.

    Installation Instructions (PDF)

  • Wilwood 160-8747 GT 48 Curved Vane Spec 37 Iron Rotor, 12.6 Inch
    New
    Wilwood 160-8747 GT 48 Curved Vane Spec 37 Iron Rotor, 12.6 Inch
    (Part #8351608747)
    x
                Wilwood's GT 48 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with our proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest, vibration free performance at any speed. These rotors provide the highest cooling capacity and longest service life for extreme braking short tracks and road course competition.
    • Spec-37 Heavy wall Castings
    • Suitable for moderate temperature racing to street use.
  • Wilwood 160-12292 GT 36 Curved Vane Spec 37 Iron Rotor, 12.19 Inch
    New
    Wilwood 160-12292 GT 36 Curved Vane Spec 37 Iron Rotor, 12.19 Inch
    (Part #83516012292)
    x
                Wilwood's GT 36 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with our proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest braking available.
    • Spec-37 Heavy wall Castings
    • Suitable for high temperature racing to street use.
  • Wilwood 120-8000-RSP BNSL6R Caliper,RH, 1.62/1.12/1.12 Pist, 1.25 Disc
    New
    Wilwood 120-8000-RSP BNSL6R Caliper,RH, 1.62/1.12/1.12 Pist, 1.25 Disc
    (Part #8351208000RSP)
    x
                The billet SL6R series adds the versatility and convenience of radial mounting to this widely popular caliper group. Radial mounting simplifies adaptation and provides two planes of adjustment for accurate alignment over the disc. These calipers integrate "Big Brake" style with Wilwood's latest technology to generate big stopping power in extreme environments over a broad range of vehicle applications. The key to the superior performance of the SL6R comes from the extremely durable and efficient body design. Starting at 4.84 pounds it is the product of computer generated solid modeling and FEA stress analysis technology. Full length stiffening ribs and a reinforced radial transition from the piston bore housings to the closed end bridges has produced the strongest SL caliper bodies ever built. When compared to open bridge calipers that use tube or stand spacers between the body halves, the closed end bridge design is measurably stronger with less separation or deflection under load. Additional strength and resistance to deflection comes from the four high-strength steel end bridge bolts. A fifth center bridge bolt provides even more overall strength and easy access to the pads without the need to remove the caliper from the mount.    A unique six-piston differential bore configuration provides balanced loading for even pad wear in sustained high heat environments. The standard SL6R calipers feature one-piece stainless steel pistons. Stainless is used for its slow he
            
  • Wilwood 160-11837-B GT 48 Curved Vane Spec 37 Iron Rotor, 11.75 Inch
    New
    Wilwood 160-11837-B GT 48 Curved Vane Spec 37 Iron Rotor, 11.75 Inch
    (Part #83516011837B)
    x
                Wilwood's GT 48 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with our proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest, vibration free performance at any speed. These rotors provide the highest cooling capacity and longest service life for extreme braking short tracks and road course competition.
    • Spec-37 Heavy wall Castings
    • Suitable for high temperature racing to street use.
  • Wilwood 120-13529-BK Forged Dynalite-M Disc Brake Caliper, Black
    New
    Wilwood 120-13529-BK Forged Dynalite-M Disc Brake Caliper, Black
    (Part #83512013529BK)
    x
                

    The Forged Billet Dynalite-M is specifically designed to enhance outboard clearance and is the basis for Wilwood’s new Classic Style brake kits. The latest applied developments and innovations in caliper design and manufacturing processes have resulted in substantial improvements in strength and performance over all comparable models.

    • Aluminum construction
    • Black Powder coat finish
    • 3.3 Pounds
    • Mount Center: 5.25 Inches
    • Mount Type: Lug
    • Mount Side: Universal
    • Type: Stainless
    • 4 Piston
    • Minimum Rotor Diameter: 10.00"
    • Maximum Rotor Diameter: 13.06"
    • Rotor Width: 1"
    • Piston Bore: 1.75"
    • Inlet Thread Size: 1/8-27 NPT
    • Strongest calipers in it's class, with weights starting at 2.80 pounds
  • Wilwood 160-2979 GT 48 Curved Vane Spec 37 Iron Rotor, 12.72 Inch
    New
    Wilwood 160-2979 GT 48 Curved Vane Spec 37 Iron Rotor, 12.72 Inch
    (Part #8351602979)
    x
                Wilwood's GT 48 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with our proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest, vibration free performance at any speed. These rotors provide the highest cooling capacity and longest service life for extreme braking short tracks and road course competition.
    • Spec-37 Heavy wall Castings
    • Suitable for moderate temperature racing to street use.
  • Hawk HB103A-.590 Performance 1969-1977 Mid-Size HPS Brake Pads, DTC-15
    Hawk HB103A-.590 Performance 1969-1977 Mid-Size HPS Brake Pads, DTC-15
    (Part #919103A)
    x
                

    Get superior stopping power with Hawk Performance! Hawk Performance brake pads have been successful in virtually all forms of motorsports for over 16 years. This success helps Hawk Performance enjoy the benefits of the “Win on Sunday, Sell on Monday,” philosophy. Hawk is one of few brake pad manufacturers that can deliver on the promise, “Race Proven – Street Legal.”

    Upgrade your 1969-77 GM Midsize braking system with these premium pads.

    Tech Tip:  Only use full metallic pads on coated rotors.

    Sold as a set of 4, 1 set will be needed to outfit 2 calipers.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

     

  • Replacement Carbon Steel Brake Rotors
    Replacement Carbon Steel Brake Rotors
    (Part #715DB206)
    x
                For use on our spindle mount wire wheels. Bolts to back side of spindle mont wheels. Rotors are made from 3/16" carbon steel, and are 10" in diameter. These rotors are ground for flatness and have been clear zinc plated.
            
  • Ford F-150 11.75 Inch Brake Rotor
    Ford F-150 11.75 Inch Brake Rotor
    (Part #91031068)
    x
                5 x 5-1/2". This rotor was originally used on front of most Ford F-150 two wheel drive trucks from 1973 to approximately 1993. 11.75" diameter. 
            
  • Wilwood 160-7100 SRP 30 Vane Iron Rotor, 11 Inch
    New
    Wilwood 160-7100 SRP 30 Vane Iron Rotor, 11 Inch
    (Part #8351607100)
    x
                SRP Drilled Performance Rotors feature a specially engineered directional cross drill and face slot pattern that improve brake response and pad performance throughout the entire range of light to heavy braking. The venting and cleaning action of the holes and slots will reduce pad glaze and disperse gasses and heat generated during the pad to rotor interface. The holes and slots also inhibit irregular pad compound build-up on the rotor faces resulting in smoother engagement and improved pedal response in all conditions. The material removed also contributes to lower rotating and unsprung suspension weight.
    • Premium grade, medium weight castings.
    • Suitable for moderate temperature racing to street use.
    • For ultimate durability in racing use comparable ULHP or GT rotors.
  • Hawk HB119A.594 Performance 1978-Up HPS Brake Pads, DTC-15
    Hawk HB119A.594 Performance 1978-Up HPS Brake Pads, DTC-15
    (Part #919119A)
    x
                

    Get superior stopping power with Hawk Performance! Hawk Performance brake pads have been successful in virtually all forms of motorsports for over 16 years. This success helps Hawk Performance enjoy the benefits of the “Win on Sunday, Sell on Monday,” philosophy. Hawk is one of few brake pad manufacturers that can deliver on the promise, “Race Proven – Street Legal.”

    • Increased stopping power
    • High friction/torque hot or cold
    • Gentle on rotors
    • Extended pad life
    • Low dust
    • Virtually noise-free

    Tech Tip:  Only use full metallic pads on coated rotors.

    Sold as a set of 4, 1 set will be needed to outfit 2 calipers.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

     

  • Wilwood 160-11839-B GT 48 Curved Vane Spec 37 Iron Rotor, 12.19 Inch
    New
    Wilwood 160-11839-B GT 48 Curved Vane Spec 37 Iron Rotor, 12.19 Inch
    (Part #83516011839B)
    x
                Wilwood's GT 48 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with our proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest, vibration free performance at any speed. These rotors provide the highest cooling capacity and longest service life for extreme braking short tracks and road course competition.
    • Spec-37 Heavy wall Castings
    • Suitable for high temperature racing to street use.
  • Wilwood 140-13581-D Dynapro 6 Front Disc Brake Kit, 12.88 Inch, Black
    New
    Wilwood 140-13581-D Dynapro 6 Front Disc Brake Kit, 12.88 Inch, Black
    (Part #83514013581D)
    x
                Please view the product's page for more information
            
  • Wilwood 15A-5740K 9725 PolyMatrix A Brake Pad Set, .98 Inch Thick
    New
    Wilwood 15A-5740K 9725 PolyMatrix A Brake Pad Set, .98 Inch Thick
    (Part #83515A5740K)
    x
                
    • Ultimate high friction pad with aggressive initial response
    • Immediate low tempeature response.
    • Low wear rate
    • Ultimate high friction pad with aggressive initial response
    • Immediate cold response with highest friction values at all temperatures.
    • Severe duty use on oval tracks, road courses, and other applications that require immediate high torque response.
    • Long wear rate for sustained high heat braking.
    • Compatible with all iron and steel rotors.

    Compound Data Sheet (PDF)

  • Stainless Steel Drilled Brake Rotor for Spindle Mount Wheel
    Stainless Steel Drilled Brake Rotor for Spindle Mount Wheel
    (Part #715DB206SS)
    x
                

    For extra stopping power and good looks. Bolts to the back side of spindle mount wheels. Brake rotors are shown here polished.

    • 10" O.D.
    • 3/16" thick
    • The center hole diameter is 2.691"
    • The bolt pattern contains four 5/16" holes on a 3.375" circle
  • Wilwood 160-7106-BK SRP-BLK 32 Vane Iron Rotor, 12.19 Inch
    New
    Wilwood 160-7106-BK SRP-BLK 32 Vane Iron Rotor, 12.19 Inch
    (Part #8351607106BK)
    x
                SRP Drilled Performance Rotors feature a specially engineered directional cross drill and face slot pattern that improve brake response and pad performance throughout the entire range of light to heavy braking. The venting and cleaning action of the holes and slots will reduce pad glaze and disperse gasses and heat generated during the pad to rotor interface. The holes and slots also inhibit irregular pad compound build-up on the rotor faces resulting in smoother engagement and improved pedal response in all conditions. The material removed also contributes to lower rotating and unsprung suspension weight.
    • Premium grade, medium weight castings.
    • Suitable for moderate temperature racing to street use.
    • For ultimate durability in racing use comparable ULHP or GT rotors.
  • Wilwood 140-2111-B Rear Brake Kit - Olds/Pontiac, 2.91 Offset
    Wilwood 140-2111-B Rear Brake Kit - Olds/Pontiac, 2.91 Offset
    (Part #8351402111)
    x
                

    Wilwood FDL Pro-Series rear disc brake kits provide a complete solution for the uncommon Olds/Pontiac rear axles on applications where parking brake assemblies are not required. Forged billet Dynalite four piston calipers, two-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of customized applications.

    • Piston Area (in²): 3
    • 1/8" NPT inlet
    • Minimum Wheel Diameter (in): 15
    • BP-10 Smart pads

    These kits do not have emergency brake provisions.

    Dynalite Rear Axle Kit Installation Instructions (PDF)

    Exploded Installation Schematic 

    Kit fits some 15" wheels. Check wheel clearance diagram in kit installation instructions before purchase.

    Axle Flange Identification Chart 

  • Brake Pads for Mustang II Caliper
    Brake Pads for Mustang II Caliper
    (Part #9193389)
    x
                

    Our street compound brake pads provide safe, quiet, and reliable performance. For Mustang II and Pinto calipers.

    Complete set of 4 pads (services 2 calipers).

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • Wilwood 15Q-7268K 7816 PolyMatrix Q Brake Pad Set, BNDL, .60 In Thick
    New
    Wilwood 15Q-7268K 7816 PolyMatrix Q Brake Pad Set, BNDL, .60 In Thick
    (Part #83515Q7268K)
    x
                
    • Medium friction, smooth engagement, low abrasion on iron rotors.
    • Flat torque curve. Can be used with aluminum rotors on Sprint Car applications.
    • Low wear rate at low to medium temperatures
    • Medium friction, smooth engagement, low abrasion on iron rotors.
    • High performance ceramic based street formula.
    • Lowest dust and noise.
    • Compatible with all types of steel or iron rotors.
    • Aluminum rotors for racing.

    Compound Data Sheet (PDF)

  • Wilwood 140-0265-BD FDL Rear Brake Kit, M-W / Lamb Ends, 1/2 Studs
    New
    Wilwood 140-0265-BD FDL Rear Brake Kit, M-W / Lamb Ends, 1/2 Studs
    (Part #8351400265BD)
    x
                FDL Rear Drag kits are true bolt-on kits available for all popular muscle car rear axles and aftermarket rears built with custom axle ends. Kits in this group are purpose built for sportsman category door cars and others with full functional four-wheel disc brakes. Based on the specific style of housing end and axle offset, mounting kits securely install the four-piston forged Dynalite caliper over 3/8"  plate steel rotors that are mounted to the axle with an aluminum hat. Standard kits include solid face rotors, with optional drilled rotor kits available to further reduce driveline weight in classes where every weight advantage is necessary.

    Installation Instructions (PDF)

  • Wilwood 160-7745-BK SRP-BLK 48 Curved Vane Iron Rotor, 12.8 Inch
    New
    Wilwood 160-7745-BK SRP-BLK 48 Curved Vane Iron Rotor, 12.8 Inch
    (Part #8351607745BK)
    x
                SRP Drilled Performance Rotors feature a specially engineered directional cross drill and face slot pattern that improve brake response and pad performance throughout the entire range of light to heavy braking. The venting and cleaning action of the holes and slots will reduce pad glaze and disperse gasses and heat generated during the pad to rotor interface. The holes and slots also inhibit irregular pad compound build-up on the rotor faces resulting in smoother engagement and improved pedal response in all conditions. The material removed also contributes to lower rotating and unsprung suspension weight.
    • Premium grade, heavy wall castings.
    • Suitable for moderate temperature racing to street use.
    • For ultimate durability in racing use comparable HD or GT rotors.
  • Airheart Brake 3025-9002 175 x One QC Caliper O-Ring Overhaul Kit
    Airheart Brake 3025-9002 175 x One QC Caliper O-Ring Overhaul Kit
    (Part #10730259002)
    x
                

    Repair parts for Airheart disc brake calipers are hard to find! These O-ring overhaul kits will get you back on the track in a hurry. Each kit includes all neccessary parts for a rebuild.

  • Wilwood 160-12286 GT 36 Curved Vane Spec 37 Iron Rotor, 11.75 Inch
    New
    Wilwood 160-12286 GT 36 Curved Vane Spec 37 Iron Rotor, 11.75 Inch
    (Part #83516012286)
    x
                Wilwood's GT 36 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with our proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest braking available.
    • Spec-37 Heavy wall Castings
    • Suitable for high temperature racing to street use.
  • GM Caliper Slider Bolt
    $2.99
    Product Rating: 4.50 Stars
    GM Caliper Slider Bolt
    (Part #8352300542)
    x
                The overall length of these slide bolts is 4-3/8".  The underhead length is 3-3/8".  The thread on the bolts is 7/16-20 (US fine). 
            
  • Wilwood 140-13582-R AERO6 GT Front Disc Brake Kit, 14 Inch
    New
    Wilwood 140-13582-R AERO6 GT Front Disc Brake Kit, 14 Inch
    (Part #83514013582R)
    x
                Please view the product's page for more information
            
  • Wilwood 140-13583 AERO4 Rear Disc Parking Brake Kit, 14 Inch
    New
    Wilwood 140-13583 AERO4 Rear Disc Parking Brake Kit, 14 Inch
    (Part #83514013583)
    x
                Please view the product's page for more information
            
  • Wilwood 140-7675 FDL 12.19 Inch Front Brake Hub Kit, 1967-72 GM
    Wilwood 140-7675 FDL 12.19 Inch Front Brake Hub Kit, 1967-72 GM
    (Part #8351407675)
    x
                

    Need a big brake package that can scrub off serious speed and look great doing it?Wilwood's Forged Dynalite Pro-Series Front Hub Kits offer complete disc brake upgrade solutions for traditionaldisc brakespindle applications onclassic Chevymuscle cars. All kits can be used with manual or power boost master cylinders.

    12.19" Big Brake Series features:

    • Forged 4-pistonDynalite Calipers - black finish
    • 12.19" diameter Ultralite HP 32 Vane rotors - plain finish
    • Wilwood BP-10SmartPads - low noise, low dust
    • Lightweight anodized aluminum Pro Street hubs
    • Minimum wheel diameter of 16"

    All kits include calipers, hubs, rotors, brackets and hardware needed. Brake hoses sold separately.

    835-1407675 Instructions (PDF)

     

  • Wilwood 120-13529-RD Forged Dynalite-M Disc Brake Caliper, Red
    New
    Wilwood 120-13529-RD Forged Dynalite-M Disc Brake Caliper, Red
    (Part #83512013529RD)
    x
                

    The Forged Billet Dynalite-M is further enhancement of the venerable Forged Dynalite series calipers. Specifically designed to enhance outboard clearance and is the basis for Wilwood’s new Classic Style brake kits. The latest applied developments and innovations in caliper design and manufacturing processes have resulted in substantial improvements in strength and performance over all comparable models.

    • Aluminum construction
    • Red Powder coat finish
    • 3.3 Pounds
    • Mount Center: 5.25 Inches
    • Mount Type: Lug
    • Mount Side: Universal
    • Type: Stainless
    • 4 Piston
    • Minimum Rotor Diameter: 10.00"
    • Maximum Rotor Diameter: 13.06"
    • Rotor Width: 1"
    • Piston Bore: 1.75"
    • Inlet Thread Size: 1/8-27 NPT
    • Strongest calipers in it's class, with weights starting at 2.80 pounds
  • Speedway 338 Medium Double Quick Change Brake Pad
    Speedway 338 Medium Double Quick Change Brake Pad
    (Part #9193387)
    x
                

    Double Quick-Change pads are compatible with our Wilwood Forged Dynalite and Billet Dynalite calipers.

    Pads are sold each. (Will need 2 per caliper.)

    Tech Tip:  Only use full metallic pads on coated rotors.

    Brake Pad Brand Guide (Link)

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

     

  • Wilwood 160-1949 UL 32 Vane Iron Rotor, 11.75 Inch
    New
    Wilwood 160-1949 UL 32 Vane Iron Rotor, 11.75 Inch
    (Part #8351601949)
    x
                Ultra-Light UL straight vane rotors provide high value performance and rugged durability for a wide range of competition, high performance, and sport driving applications. Don't confuse these rotors with bargain priced off-brand named parts. Wilwood's modern manufacturing capability, combined with large scale economy, make it possible to offer this level of quality and performance at such an affordable price.
    • Premium grade, medium weight castings.
    • Suitable for moderate temperature racing to street use.
  • Brake Kit: 1969-77 GM Caliper to Early Ford Spindles, Chevy B-P
    Brake Kit: 1969-77 GM Caliper to Early Ford Spindles, Chevy B-P
    (Part #91031941)
    x
                GM bolt pattern 5 on 4-3/4"

    Easily installs 11" rotors and 1969-77 mid-size GM single piston calipers to your 1937-48 Ford passenger car spindles. No machine work needed.

    Kit Includes:
  • New 11" brake rotor, 5 x 4-3/4"
  • Semi-metallic brake pads
  • GM Caliper slide bolts
  • Rebuilt 1969-77 calipers (7/16"-20 inlets)
  • 1973-77 GM brake brackets
  • 1973-77 hardware
  • New bearing and seal adapters
  • Seals
  • Inner bearing cups
  • Rubber Brake Lines
  • Inner bearing cones
  • Spacers
  • Outer bearing cones
  • Seals
  • Bolt kit for flat steering arm
  • Dust caps
  • Instructions
  • Not for use with bolt-on steering arms.  The 11" rotor brake kits are great for Street Rods based on 1932-48 Fords. However these kits are much too large and heavy for a T-bucket or earlier roadster.

    910-31941 Instructions (pdf)

  • Wilwood 160-2541 GT 48 Curved Vane Spec 37 Iron Rotor, 12.72 Inch
    New
    Wilwood 160-2541 GT 48 Curved Vane Spec 37 Iron Rotor, 12.72 Inch
    (Part #8351602541)
    x
                Wilwood's GT 48 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with our proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest, vibration free performance at any speed. These rotors provide the highest cooling capacity and longest service life for extreme braking short tracks and road course competition.
    • Spec-37 Heavy wall Castings
    • Suitable for moderate temperature racing to street use.
  • Wilwood 120-8079-RSP BNSL6R Caliper, 1.62/1.12/1.12 Pistons, 1.10 Disc
    New
    Wilwood 120-8079-RSP BNSL6R Caliper, 1.62/1.12/1.12 Pistons, 1.10 Disc
    (Part #8351208079RSP)
    x
                The billet SL6R series adds the versatility and convenience of radial mounting to this widely popular caliper group. Radial mounting simplifies adaptation and provides two planes of adjustment for accurate alignment over the disc. These calipers integrate "Big Brake" style with Wilwood's latest technology to generate big stopping power in extreme environments over a broad range of vehicle applications. The key to the superior performance of the SL6R comes from the extremely durable and efficient body design. Starting at 4.84 pounds it is the product of computer generated solid modeling and FEA stress analysis technology. Full length stiffening ribs and a reinforced radial transition from the piston bore housings to the closed end bridges has produced the strongest SL caliper bodies ever built. When compared to open bridge calipers that use tube or stand spacers between the body halves, the closed end bridge design is measurably stronger with less separation or deflection under load. Additional strength and resistance to deflection comes from the four high-strength steel end bridge bolts. A fifth center bridge bolt provides even more overall strength and easy access to the pads without the need to remove the caliper from the mount.    A unique six-piston differential bore configuration provides balanced loading for even pad wear in sustained high heat environments. The standard SL6R calipers feature one-piece stainless steel pistons. Stainless is used for its slow he
            
  • Wilwood 150-8936K D154 PolyMatrix BP-10 Brake Pad Set, GM Metric
    Wilwood 150-8936K D154 PolyMatrix BP-10 Brake Pad Set, GM Metric
    (Part #8358936)
    x
                

    Speedway Motors is your one-stop shop for GM 1978-Up Midsize caliper brake pads.

    • Medium friction, smooth engagement, low abrasion on iron rotors.
    • Flat torque curve.
    • Low to medium wear rate, increases as temperature increases.

    Brake Pad Brochure (PDF)

    Tech Tip:  Only use full metallic pads on coated rotors.

    Tech Tip: You can fine tune your car's brake system by selecting different compounds for the front and rear, or side to side. 

    Sold as a set of 4, 1 set will be needed to outfit 2 calipers.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • Wilwood 15Q-6829K 7420 PolyMatrix Q Brake Pad Set, BSL 4 Lug Mt .80 In
    New
    Wilwood 15Q-6829K 7420 PolyMatrix Q Brake Pad Set, BSL 4 Lug Mt .80 In
    (Part #83515Q6829K)
    x
                
    • Medium friction, smooth engagement, low abrasion on iron rotors.
    • Flat torque curve. Can be used with aluminum rotors on Sprint Car applications.
    • Low wear rate at low to medium temperatures
    • Medium friction, smooth engagement, low abrasion on iron rotors.
    • High performance ceramic based street formula.
    • Lowest dust and noise.
    • Compatible with all types of steel or iron rotors.
    • Aluminum rotors for racing.

    Compound Data Sheet (PDF)

  • 1969-1972 GM Midsize 11 Inch Brake Rotor, 5 on 4 3/4 Inch
    1969-1972 GM Midsize 11 Inch Brake Rotor, 5 on 4 3/4 Inch
    (Part #91065390)
    x
                

    We stock those hard-to-find replacement brake rotors for your 1969-1972 GM midsize car. These rotors are specifically designed for the rigors of dirt track racing.  Drilled with a 5-on-4.75" bolt circle. Includes 7/16" fine quick-start wheel studs (installed).

    • 1969-1972 GM Midsize
    • 11 Inch Brake Rotor
    • 5 on 4-3/4 Inch
    • 7/16" fine studs installed
    • 11" diameter x 1"
    • IMCA Approved

    This rotor is designed for dirt track applications and should NOT be used for asphalt racing.

     

     

  • Wilwood 160-0201 Solid Steel Rear Drag Rotor, 11.44 x .350 - 8 on 7 In
    Wilwood 160-0201 Solid Steel Rear Drag Rotor, 11.44 x .350 - 8 on 7 In
    (Part #8351600201)
    x
                These rotors are most often directly mounted to "fixed" mount hats or mounting plates, but they can also be used with special dynamic mount hats or plates that require the use of a standard hole mount disc. Each rotor size is available in the standard solid plate style, or weight drilled for lighter duty applications.
  • Wilwood 15H-8128K 8521 PolyMatrix H Brake Pad Set, .83 Inch Thick
    New
    Wilwood 15H-8128K 8521 PolyMatrix H Brake Pad Set, .83 Inch Thick
    (Part #83515H8128K)
    x
                
    • High friction, smooth intitial response.
    • Steady rise in friction as temperature increases.
    • Low wear rate
    • High friction, smooth intitial response.
    • Smooth initial engagement with a linear increase as heat and pressure rise.
    • Severe duty use for road courses and hard braking pavement/dirt ovals.
    • Predictable response with excellent modulation at all temperatures.
    • Long wear rate for durability in sustained high heat.
    • Compatible with all iron and steel rotors.

    Compound Data Sheet (PDF)

Goto Previous PagePrevious Page
1 2 3 4 5 ... 16