Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Street Rod Brakes At Speedway Motors

Nobody knows street rod brakes like Speedway Motors! With the most experience in the business, you can be assured that you are getting quality hot rod brake components for the most critical part of your car. Speedway has disc brake kits and brake calipers for all types of street rods, classic Chevy and Ford trucks, and all the popular muscle cars. We also have a huge selection of master cylinders, brake boots, brake pedals, plus the brake lines, fittings and proportioning valves you need to complete any brake system replacement, rebuild, or upgrade.

"Street Rod, Disc Brakes and Accessories" Page 1 of 11

  • GM Caliper Slider Bolt
    $2.99
    Product Rating: 4.50 Stars
    GM Caliper Slider Bolt
    x
                The overall length of these slide bolts is 4-3/8".  The underhead length is 3-3/8".  The thread on the bolts is 7/16-20 (US fine). 
            
  • Speedway 338 Medium Double Quick Change Brake Pad
    Speedway 338 Medium Double Quick Change Brake Pad
    x
                

    Double Quick-Change pads are compatible with our Wilwood Forged Dynalite and Billet Dynalite calipers.

    Pads are sold each. (Will need 2 per caliper.)

    Tech Tip:  Only use full metallic pads on coated rotors.

    Brake Pad Brand Guide (Link)

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

     

  • Speedway Pro-Lite Vented Brake Rotor, 11.75 x .81 Inch
    Speedway Pro-Lite Vented Brake Rotor, 11.75 x .81 Inch
    x
                

    Every rotor is cast from premium grade, long grain carbon iron which exhibits long wear, high thermal stability, and excellent resistance to distortion in high heat. Modern foundry and machining techniques hold close tolerances on face and vane thickness. Combining the correct face thickness with a 32 vane casting provides superior heat management and long service life with low rotating and unsprung weight. The straight vane design also makes it possible to use the same rotor on left or right hand mounting locations.

    • Thickness: GM .810"
    • Outside Diameter: 11.75"
    • # Holes: 8
    • Bolt Circle: 7"
    • Thread: Thru
    • Weight: 8.00 lbs

    Pro-Lite Rotor Application Chart (GIF)

  • Rotor-Hat Bolt Set
    $3.99
    Rotor-Hat Bolt Set
    x
                Ultralight, 5/16-24 thread. Set of 8. With self-locking nuts.
            
  • Wilwood 150-8850 Poly-D 10 Double Quick Change Brake Pad
    Wilwood 150-8850 Poly-D 10 Double Quick Change Brake Pad
    x
                

    Double Quick-Change pads are compatible with our Wilwood Forged Dynalite and Billet Dynalite calipers.

    • Medium friction, low to medium temperarture range.
    • Good cold torque response.
    • Low to moderate wear rate

    Pads are sold each. (Will need 2 per caliper.)

    Tech Tip:  Only use full metallic pads on coated rotors.

    Brake Pad Brochure (PDF) 

    Brake Pad Brand Guide (Link)

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

    8353991 Instructions (PDF)  

  • 1978-Up GM Metric Brake Calipers, IMCA Approved
    1978-Up GM Metric Brake Calipers, IMCA Approved
    x
                

    These stock replacement single piston Metric calipers were standard equipment on 1978-88 GM mid-size cars (Cutlass, Grand Prix, Regals, Monte Carlo, etc.). They feature a 2.38" single piston, shielded bottom inlet, and will save 3-1/2 lbs. per side compared to mid-size 1969-1977 caliper.

     

    • IMCA approved
    • No core charge required
    • 7/16"-20 inlet
    • Can be used with brake hoses from Pre-1978 GM intermediate cars
    • Brake pads & bolts sold separately

     

    Note: Does NOT include brake pads or slider bolts and bushings.

  • Disc Brake Kit, 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-1/2 Inch
    Disc Brake Kit, 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-1/2 Inch
    x
                

    Easily installs 11" rotors and the 1978-up GM Metric calipers to your 1937-48 Ford passenger car and 1937-47 1/2 ton Ford spindles. No machine work needed. This kit works well with bolt-on steering arms. The 11" rotor brake kits are great for street rods based on 1932-48 Fords. Uses Ford/Mopar wheel bolt pattern of 5 on 4-1/2".

    910-31945 Instructions (PDF)

  • Mustang II Disc Brake Rotor, 5 on 4-3/4 Inch
    Mustang II Disc Brake Rotor, 5 on 4-3/4 Inch
    x
                Vented stock 9-1/4" diameter brake rotors for 1974-1980  Mustang II, Pinto, or Bobcat spindles (or Speedway brake kits using  '49-'54 Chevy spindles). Brake rotors are new, not plugged or re-drilled. Has a  5 on 4-3/4" bolt pattern with corresponding 7/16" diameter fine thread  wheel studs.

    Be sure to install new bearings and seals (910-31000) with your new disc brake rotors.
  • Stamped Steel Brake Hat, 3 Inch Offset
    Stamped Steel Brake Hat, 3 Inch Offset
    x
                

    Stamped steel hat with all three bolt patterns: 5 on 4-1/2", 5 on 4-3/4", and 5 on 5" bolt circle patterns. Weighs just 2 lbs. and is IMCA approved.

    • Rotor Bolt Circle:  7" x 8 holes
    • 3.00" offset
    • 3.05" diameter center hole
    • 5.83" I.D. clearance
    • Stud Hole Diameter: 1/2"
    • Rotor Mount Bolt Hole: .325"

    Note: Failure to follow the installtion instructions will result in damage to the brake hat and will result in excess run out of the rotor.

    Instructions (PDF)

  • Rotor Bolt Set - 5/16 x 3/4, Bolt Only
    Rotor Bolt Set - 5/16 x 3/4, Bolt Only
    x
                Ultralight, 5/16-18 thread. Set of 8. With self-locking nuts.
            
  • GM Metric Disc Brake to 9 Inch Ford Bracket Set
    GM Metric Disc Brake to 9 Inch Ford Bracket Set
    x
                Allows you to bolt '78 an Up GM Metric disc brakes on Ford 9" rearend.  Hardware sold separately.

    Includes:
    • 2 Caliper brackets
    • 2 Adapter plates
    • 2 Spacer plates
    • 8 5/16" spacers
    • 8 1/8" spacers

    Note:  This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts.  If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so.  Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".

  • Speedway 1949-54 Chevy Passenger Car Disc Brake Conversion Kit
    Speedway 1949-54 Chevy Passenger Car Disc Brake Conversion Kit
    x
                
    This kit allows you to upgrade your 1949-1954 Chevy car to front disc brakes and retain the original 5 on 4-3/4 inch bolt pattern. Front disc brakes provide a significant improvement in braking performance versus the drum brakes your old Chevy came with. This kit includes everything you need to convert your stock 1949-1954 Chevy car to disc brakes. 
    • Works with stock passenger car spindles
    • No machining required
    • 11" diameter vented rotors
    • 2-1/2" single-piston brake calipers
    • 5 on 4-3/4 inch bolt pattern
    • Works with most 15" diameter wheels
    • Not for straight axle
    • Works best with 1949-54 Chevy brake pedal/master/booster assembly 910-19542

    Instructions (PDF)

  • Mustang II Disc Brake Rotor, 5 on 4-1/2 Inch
    Mustang II Disc Brake Rotor, 5 on 4-1/2 Inch
    x
                Vented stock 9-1/4" diameter brake rotors for 1974-1980  Mustang II, Pinto, or Bobcat spindles (or Speedway brake kits using  '49-'54 Chevy spindles). Brake rotors are new, not plugged or re-drilled. Has a  5 on 4-1/2" bolt pattern with corresponding 1/2" diameter fine thread  wheel studs. 

    Be sure to install new bearings and seals (910-31000) with your new disc brake rotors.
  • Weld-On 1978-88 GM Flat Mount Caliper Bracket
    Weld-On 1978-88 GM Flat Mount Caliper Bracket
    x
                

    These caliper brackets mount flat and must be welded onto your 3" diameter axle tube. Designed to mount a 1978-1988 GM metric car front caliper for use with an 11.75" diameter rotor. Brackets are 1/4" thick.

    IMCA APPROVED

  • Ford 9 Inch Bolt-On Rear Disc Brake Kit
    Ford 9 Inch Bolt-On Rear Disc Brake Kit
    x
                

    If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes bolt-on caliper brackets, 11-1/4" vented rotors, '78-'88 GM metric style calipers, brake pads and hardware.

    • Fits both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
    • For Ford passenger car axles ONLY 
    • Fits axle with maximum flange diameter of 6-1/4" O.D.
    • For 15" and larger wheel applications ONLY

    NOTE: This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts. If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so. Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".

    Axle Flange Identification Chart (GIF)

    910-31902 Instructions (PDF)

  • Weld-On 1978-88 GM Metric Caliper Bracket
    Weld-On 1978-88 GM Metric Caliper Bracket
    x
                

    Mounts 1978-1988 GM front caliper to any 3" tube rear end using 11-3/4" diameter rotors. Fully machined steel with punched lightening holes. Measures approximately 5-1/2" between mounting holes.

    IMCA APPROVED

  • Hawk HB119M.594 Performance Black 1978-Up GM Metric Brake Pads
    Hawk HB119M.594 Performance Black 1978-Up GM Metric Brake Pads
    x
                

    Get superior stopping power with Hawk Performance! Hawk Performance brake pads have been successful in virtually all forms of motorsports for over 16 years. This success helps Hawk Performance enjoy the benefits of the “Win on Sunday, Sell on Monday,” philosophy. Hawk is one of few brake pad manufacturers that can deliver on the promise, “Race Proven – Street Legal.”

    Hawk Black Pads:

    Medium torque and temperature compound designed to be a good, all-purpose low- cost racing brake pad. Can be used as a Dirt Circle Track and Stock Car application.

    Tech Tip:  Only use full metallic pads on coated rotors.

    Sold as a set of 4, 1 set will be needed to outfit 2 calipers.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

     

  • Disc Brake Kit 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-3/4 Inch
    Disc Brake Kit 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-3/4 Inch
    x
                

    Easily install 11" rotors and 1978-88 GM Metric calipers to your 1937-48 Ford passenger car style spindles with no machine work needed. This disc brake kit is great for street rods based on 1932-1948 Fords. For lightweight cars like T-buckets or early roadsters, we recommend the Wilwood kits. This front disc brake conversion kit works well with bolt-on steering arms. The 11" diameter rotors have the GM wheel bolt pattern of 5 x 4-3/4". Calipers have 7/16"-20 inlets.

    910-31946 Instructions (PDF)

  • Replacement 11-1/4 Inch Rear Brake Rotor
    Replacement 11-1/4 Inch Rear Brake Rotor
    x
                

    These 11-1/4" one-piece, vented iron disc brake rotors are for rear disc brake applications. Features dual bolt patterns for 5 x 4.5" (Ford/Mopar) and 5 x 4.75" (Chevy/GM) wheels. 

    • Center Hole:  2.78"
    • Backspace:  2.30"
    • Maximum Axle Flange Diameter:  6-1/4"
    • Thickness:  1"
    • Thickness @ Center of Rotor:  0.236"
  • Airheart Brake 175H, Hard Lining Replacement
    Airheart Brake 175H, Hard Lining Replacement
    x
                

    Brake "pucks" or caliper pads for your vintage Airheart 175H series calipers. Pucks sold each.

    • Measures 1-5/8" O.D.
    • Has an inside step approx 1-1/2" O.D.
    • There are (2) countersunk screw holes in the pad for attachment.
    • Hard - Used on aluminum & steel rotors. The best pad to use on aluminum rotors. Very little metallic. Longer rotor & pad life. Excellent street pad.
  • Airheart Brake 175H, Medium Lining Replacement
    Airheart Brake 175H, Medium Lining Replacement
    x
                

    Brake "pucks" or caliper pads for your vintage Airheart 175H series calipers. Pucks sold each.

    • Measures 1-5/8" O.D.
    • Has an inside step approx 1-1/2" O.D.
    • There are (2) countersunk screw holes in the pad for attachment.
    • Medium - Used on steel. Medium friction works well at lower temperatures. Good for street or dirt use.
  • Ford 9 Inch Bolt-On Rear Disc Brake Kit w/ E-Brake
    Ford 9 Inch Bolt-On Rear Disc Brake Kit w/ E-Brake
    x
                

    If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes bolt-on caliper brackets, 11-1/4" vented rotors, '78-'88 GM emergency brake calipers, brake pads and hardware.

    • Fits both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
    • For Ford passenger car axles ONLY 
    • Fits axle with maximum flange diameter of 6-1/4" O.D.
    • For 15" and larger wheel applications ONLY

    NOTE: This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts. If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so. Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".

    Axle Flange Identification Chart (GIF)

    910-31921 Instructions (PDF)

  • Weld-On 1969-77 GM Flat Mount Caliper Bracket
    Weld-On 1969-77 GM Flat Mount Caliper Bracket
    x
                

    These caliper brackets mount flat and must be welded onto your 3" diameter axle tube. Designed to mount a 1969-1977 GM mid-size car front caliper for use with an 11.75" diameter rotor. Brackets are 5/16" thick.

    IMCA APPROVED

  • Speedway 1969-77 GM Midsize Caliper
    Speedway 1969-77 GM Midsize Caliper
    x
                Rebuilt 1969-77 mid and full size caliper. 7/16"-20 inlet so you can use the readily available brake hoses and hardware from Pre-1978 GM midsize cars. IMCA approved. 

    No core charge required. Fits 1" thick rotor. 2.8" diameter pistons installed. It has 7-1/16" center to center mounting holes. The width between mounting tabs is 2-3/4".
  • Wilwood 160-0471 Ultralite 32 Vane Vented Iron Rotor, 11.75 x .810 In.
    Wilwood 160-0471 Ultralite 32 Vane Vented Iron Rotor, 11.75 x .810 In.
    x
                

    Every Wilwood brake rotor is cast from premium grade, long grain carbon iron. This material exhibits long wear, high thermal stability, and excellent resistance to distortion in high heat. Modern foundry and machining techniques hold close tolerances on face and vane thickness. Combining the correct face thickness with a 32 vane casting provides superior heat management and long service life with low rotating and unsprung weight. The straight vane design also makes it possible to use the same rotor on left or right hand mounting locations.

    Ultralite Rotor Application Chart (GIF)

  • Mustang II Complete 11 Inch Brake Kit, Ford 5 x 4-1/2 Bolt Pattern
    Mustang II Complete 11 Inch Brake Kit, Ford 5 x 4-1/2 Bolt Pattern
    x
                Upgrade your Mustang II based suspension from the stock 9-1/4" rotors to our 11" rotors with powerful single piston GM metric floating calipers. This simple bolt-on conversion requires no machining. For use on 1974-80 Pinto, Bobcat and Mustang II spindles.

    Features a 5 on 4-1/2" Ford/Mopar wheel bolt pattern (increases track width 1/2" per side). Includes two 16" front brake hoses and 7/16"-20 banjo bolts with crush washers.

    910-31944 Instructions (PDF)

  • 11 Inch Ford Disc Brake Rotors
    11 Inch Ford Disc Brake Rotors
    x
                

    This disc brake rotor was OEM on:

    • 1975-1980 Ford Granada
    • 1974-1977 Ford Maverick
    • 1977-1980 Lincoln Versailles
    • 1974-1977 Mercury Caliente, Comet
    • 1975-1980 Mercury Monarch

    NOT interchangable with rotor 91031067. If you have the brackets and adapters designed for the Granada rotor, the GM rotor 91031067 will not fit. Very common rotor to use as a conversion rotor.

  • Wilwood 150-2391 Gator Double Quick Change Brake Pad
    Wilwood 150-2391 Gator Double Quick Change Brake Pad
    x
                

    Double Quick-Change pads are compatible with our Wilwood Forged Dynalite and Billet Dynalite calipers.

    • Medium friction, low to medium temperarture range.
    • Good cold torque response.
    • Low to moderate wear rate

    Pads are sold each. (Will need 2 per caliper.)

    Tech Tip:  Only use full metallic pads on coated rotors.

    Brake Pad Brochure (PDF) 

    Brake Pad Brand Guide (Link)

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

    Brake Pad Characteristics  (PDF)  

  • Ford Mustang II-Pinto Caliper
    Ford Mustang II-Pinto Caliper
    x
                Remanufactured Mustang II/Pinto caliper with retaining clip hardware. 7/16"-24 inlet.

     

  • Steering and Brake Kit for 46 Inch Ford Axle
    Steering and Brake Kit for 46 Inch Ford Axle
    x
                

    This kit makes it easy to order a steering and brake kit in plain or chrome for your Ford axle. Included in kit are forged '37-'41 Ford spindles with fitted kingpins, 1-3/4" dropped bolt-on arms, 11" brake rotors with 5 on 4.5" or 5 on 4.75" bolt pattern, brackets, bearings and seals, mounting hardware, GM Metric calipers, spindle nuts, dust caps, brake lines with tabs, tie rod ends, and tie rod tube.

    • Ford Spindles
      • One piece forged 4140 steel
      • Modeled after the 1937-41 round-back design
      • Standard king pins fit to spindles
      • Spindle Identification Guide (Link)
    • Speedway 11" Brake Kit
      • 11" vented iron rotor, 1" thick 
      • Wheel studs - 1/2" Fine (4-1/2" BP), 7/16" Fine (4-3/4" BP)
      • GM Metric '78-'88 calipers, 2-1/2" piston

    Choose 46" or 48" axle width kit. For spring over axles only.

  • Brake Kit 1969-77 GM Caliper to Early Ford Spindle, Ford B-P
    Brake Kit 1969-77 GM Caliper to Early Ford Spindle, Ford B-P
    x
                

    Easily installs 11" Ford/Mopar rotors and 1969-1977 midsize GM single piston calipers to your 1937-1948 Ford passenger car spindles. No machine work needed. Great for street rods based on 1932-1948 Fords, however, these kits are much too large and heavy for a T-bucket or an early roadster.

    Not for use with bolt-on steering arms.

    Note: Some applications may require you to purchase item (617-8562) with this kit.

    910-31940 Instructions (PDF)

  • Disc Brake Kit, 1969-77 GM Caliper to Early Ford Spindle, 5 on 4-3/4 Inch
    Disc Brake Kit, 1969-77 GM Caliper to Early Ford Spindle, 5 on 4-3/4 Inch
    x
                

    Easily installs 11" rotors and the 1969-77 GM midsize calipers to your 1937-48 Ford passenger car spindles. No machine work needed. This kit works well with bolt-on steering arms. The 11" rotor brake kits are great for street rods based on 1932-48 Fords. Uses Chevy bolt pattern 5 on 4-3/4".

    910-31942 Instructions (PDF)

  • 11 Inch Mustang II Rotor with GM 4.75 Inch Bolt Circle, Metric Caliper
    11 Inch Mustang II Rotor with GM 4.75 Inch Bolt Circle, Metric Caliper
    x
                This rotor allows the use of GM Metric calipers along with a GM car bolt pattern. Vented stock 11" diameter brake rotors for 1974-1980  Mustang  II, Pinto, or Bobcat spindles (or popular GM Metric calipers and brackets). Brake rotors are new, not plugged or re-drilled. Has a   5 on 4-3/4" bolt pattern with corresponding 7/16" diameter fine thread   wheel studs.
    • 5 on 4.75" Bolt circle
    • Granada type rotor
    • For use with popular GM Metric calipers and brackets
    • Bearing and seal kit sold separately (910-31052)
  • 1978-88 Replacement GM Midsize Metric Calipers
    1978-88 Replacement GM Midsize Metric Calipers
    x
                

    These stock replacement single piston metric calipers were standard equipment on 1978-88 GM midsize cars (Cutlass, Grand Prix, Regals, Monte Carlo, etc.). They feature a 2.38" single piston, shielded bottom inlet, and will save 3-1/2 lbs. per side compared to midsize 1969-1977 caliper.

    • No core charge required
    • 10mm x 1.50 inlet 
    • Speedway 156 pads and slider bolts included

     

  • Weld-On 1969-77 GM Mid-size Caliper Bracket
    Weld-On 1969-77 GM Mid-size Caliper Bracket
    x
                

    Mounts 1969-1977 GM mid-size car front caliper to any 3" tube rear end using 11-3/4" diameter rotors. Fully machined steel with punched lightening holes. Measures approximately 7" between mounting holes.

    IMCA APPROVED

  • Speedway Soft Street Brake Pads, GM Metric 1978-UP
    Speedway Soft Street Brake Pads, GM Metric 1978-UP
    x
                

    Speedway soft brake pad for GM Metric 1978-Up.

    Sold as one set of 4 (ST); outfits two calipers.

    Tech Tip: You can fine tune your car's brake system by selecting different compounds for the front and rear, or side to side.

    Tech Tip:  Only use full metallic pads on coated rotors.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • Brake Pads for Mustang II Caliper
    Brake Pads for Mustang II Caliper
    x
                

    Our street compound brake pads provide safe, quiet, and reliable performance. For Mustang II and Pinto calipers.

    Complete set of 4 pads (services 2 calipers).

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • Wilwood 150-8936K BP-10 GM Metric 1978-Up Brake Pads
    Wilwood 150-8936K BP-10 GM Metric 1978-Up Brake Pads
    x
                

    Speedway Motors is your one-stop shop for GM 1978-Up Midsize caliper brake pads.

    • Medium friction, smooth engagement, low abrasion on iron rotors.
    • Flat torque curve.
    • Low to medium wear rate, increases as temperature increases.

    Brake Pad Brochure (PDF)

    Tech Tip:  Only use full metallic pads on coated rotors.

    Tech Tip: You can fine tune your car's brake system by selecting different compounds for the front and rear, or side to side. 

    Sold as a set of 4, 1 set will be needed to outfit 2 calipers.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • Wilwood 140-11013 FDL 11 Inch Pro Series Front Brake Kit, 1937-48 Ford
    Wilwood 140-11013 FDL 11 Inch Pro Series Front Brake Kit, 1937-48 Ford
    x
                

    Wilwood Forged Dynalite Pro-Series Front Hub Kits offer a complete disc brake upgrade solution for your 1937-48 Ford spindles. Based on the venerable forged billet Dynalite caliper, these versatile kits suit the braking requirements and style preferences for a daily driver, serious competition, or the most discriminating show enthusiast.

    Most kits require no modifications for installation, and provide plenty of clearance inside popular 15” wheels. FDL Pro-Series kits can be used with either manual or power boost master cylinders.

    Wilwood Heavy Duty Kits Feature:

    • Forged 4-piston Dynalite Calipers
    • 11.00" diameter Ultralite HP 30 Vane iron rotors - plain finish
    • Wilwood BP-10 SmartPads - low noise, low dust
    • Lightweight anodized aluminum Pro Street hubs
    835-14011013 Instructions (PDF)

    *NOTE*: See Notes tab for important install info.

  • Speedway 156 1978-Up GM Metric Brake Pads
    Speedway 156 1978-Up GM Metric Brake Pads
    x
                

    The Speedway 156 brake pad works with aluminum or steel rotors. Best pad for aluminum rotors. Features a low metallic compound for long life and excellent street performance.

    Sold as one pair (PR); outfits one caliper.

    Tech Tip: You can fine tune your car's brake system by selecting different compounds for the front and rear, or side to side.

    Tech Tip:  Only use full metallic pads on coated rotors.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

     

Goto Previous PagePrevious Page
1 2 3 4 5 ... 11