Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Street Rod Cooling At Speedway Motors

Speedway Motors has the cooling system components that performance street rod engines require! Depend on our quality universal aluminum radiators, water pumps, electric fans, coolant additives, and expansion tanks to keep your hot rod cool. View our great selection of flex cooling fans, high pressure radiator caps, radiator hoses, and water pump pulleys online! Get the best quality hot rod parts at the lowest possible prices from Speedway Motors!

"Street Rod, Cooling Fan" Page 1 of 3

  • Cooling Fan Control for Electric Gauges
    Cooling Fan Control for Electric Gauges
    x
                

    This is the slickest thing we've seen in years. This adjustable box simply uses your electric temperature gauge as the sending unit to control your cooling fan. Features a built-in 30 amp relay to provide maximum power to your fan and it comes with a tiny LED lamp to let you know when the fan is running plus a fuselink to protect the wiring between the temperature control unit and the fan.

    • Easy to install and adjust 
    • No radiator tube
    • Uses existing wiring
    • Simple hookup
    • Fully adjustable
    • Driver-controlled temperature
    • A/C compressor switch to automatically turn on fans
    • 30 amp relay inside box
    • Protective fuse link
    • For 12 volt electrical systems
    • Measures 4-3/4" x 3" x 1-1/4"
  • Flex-a-lite Heavy Duty Steel Cooling Fan
    Flex-a-lite Heavy Duty Steel Cooling Fan
    x
                

    Heavy duty fan recommended for stock cars. Moves the maximum amount of air for the best cooling. Steel blades, non-flex design.

    Available in 15", 17", 18" or 19" diameters.

    910-1575 Instructions (PDF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance

  • Universal Water Pump Shim Kit
    Universal Water Pump Shim Kit
    x
                

    Water pump pulley shim kit provides proper drive belt alignment with pulleys.  Kit contains two aluminum 1/16" spacer and one 1/8" spacer.

    Learn more about using different water pump accessories to best fit your application by reading our tech article.  SBC - Short vs Long Water Pump

  • Chrome Curved Blade Electric Fan
    Chrome Curved Blade Electric Fan
    x
                

    You've spent time and money to make things look good under the hood, but you still have that ugly old fan. These chrome beauties are the finishing touch you need under your hood. These fans are reversible, so they can be used in front of or behind the radiator. The blade must be reversed when switching from one style to the other.  Mounting kit sold separate.

    • Beautiful chrome finish
    • Molded plastic material
    • Reversible
    • Can be used as either a pusher or puller type
    • Choose between:
      • 12" 1500 CFM
      • 14" 1700 CFM
      • 16" 2100 CFM 
    • Mounting kit sold separate

    Note: Will require a relay to keep from burning up the switch. Relay NOT included.

    Turbo Swirl Fan Installation Instructions (PDF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Aluminum Lower Pulley Screw Kit, Coarse Thread
    Aluminum Lower Pulley Screw Kit, Coarse Thread
    x
                

    Set of three Allen bolts for lower aluminum water pump pulley.

    • Coarse Thread
  • Chrome Fan Shroud, 3 Inch Wide
    Chrome Fan Shroud, 3 Inch Wide
    x
                

    Beautifully chrome plated. Improves cooling on most cars. Flexible design conforms to almost any diameter fan. Attach to radiator core with nylon zip-ties. Includes mounting hardware.

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • AFCO 80197 Universal Electric Fan Mounting Kit
    AFCO 80197 Universal Electric Fan Mounting Kit
    x
                

    This neat kit allows you to mount an electric fan to your street rod radiator. Works great with AFCO electric fans.

    The maximum mounting distance on the plates of this kit is 22-1/4".  The minimum mounting distance on the plates is 15-1/4".

    Instructions (PDF) 

  • Spal Fan Mounting Kit
    $14.99
    Product Rating: 5.00 Stars
    Spal Fan Mounting Kit
    x
                A mounting kit for Spal curved bladed fans.
            
  • Steel Four Blade Racing Fan, 15 Inch
    $29.99
    $35.00
    Product Rating: 5.00 Stars
    Steel Four Blade Racing Fan, 15 Inch
    x
                

    These four blade fans have proven to be the fan of choice due to weight, drag and cooling efficiency. Most modifieds use the 15" to 17" while late models and street stocks tend to use the 18" and 19".

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Turbo Swirl Electric Fan
    From: $59.99
    Product Rating: 4.62 Stars
    Turbo Swirl Electric Fan
    x
                

    These Turbo Swirl electric cooling fans are the thinnest fans available. Unique mounting frame has shroud molded-in for improved air flow. Reversible motor, no thermostat. Shroud is 1" larger.

    910-159 Instructions (PDF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • SPAL Curved Blade Fans
    $160.99
    Product Rating: 4.83 Stars
    SPAL Curved Blade Fans
    x
                

    These SPAL fans feature curved blades which are much quieter than straight bladed fans. Pull type only. Available in 14" or 16" diameter.

    No mounting hardware is include. You may wish to order 910-64065.

    910-153 Instructions (PDF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Billet Aluminum Fan Spacers
    $21.99
    Product Rating: 4.36 Stars
    Billet Aluminum Fan Spacers
    x
                

    Precision machined billet aluminum. Includes bushing to fit both large (3/4") and small (5/8") pilot shaft Chevy water pumps. Five sizes available: 1", 1-1/2", 2", 2-1/2" and 3". 

    • Bolts included
    • Lightweight billet 6061-T6 aluminum construction
    • Anodized black

    Note: This adapter contains two bolt patterns for both the long style and short style Chevy water pumps: 2-5/32" and 1-3/4".

  • Chrome Fan Shroud, 5-1/2 Inch Wide
    Chrome Fan Shroud, 5-1/2 Inch Wide
    x
                

    Beautifully chrome plated. Improves cooling on most cars. Flexible design conforms to almost any diameter fan. Attach to radiator core with nylon zip-ties. Includes mounting hardware.

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Steel Four Blade Racing Fan, 18 Inch
    $32.99
    $40.00
    Product Rating: 4.00 Stars
    Steel Four Blade Racing Fan, 18 Inch
    x
                

    These four blade fans have proven to be the fan of choice due to weight, drag and cooling efficiency. Most modifieds use the 15" to 17" while late models and street stocks tend to use the 18" and 19".

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Aluminum Fan Shroud Kit for 28 Inch Radiator, Engine Driven Fan
    Aluminum Fan Shroud Kit for 28 Inch Radiator, Engine Driven Fan
    x
                Please view the product's page for more information
            
  • Cooling Components CCI-1750 Cooling Machine Electric Fan, Style 50
    Cooling Components CCI-1750 Cooling Machine Electric Fan, Style 50
    x
                At one time or another we all have had a car overheat. These fan/shroud combos are just the ticket to avoid having it happen again. These 2500 CFM pull-type fans measure 2-5/8" deep at the motor, 2-3/8" at the mounting brackets and 1-1/2" at the high impact shroud. 12 volt. 
    • 18-1/2" wide x 22-1/4" high
    • Can be easily reduced in size to 17-1/2" wide x 21-1/8" high
    • 12 volt operation
    • Lower engine operating temperatures
    • Saves horsepower
    • Better fuel mileage
    • Constructed of high-impact ABS material

    Note:  This fan motor requires the use of a 70 amp or larger fan relay.

    Fan Application Chart (GIF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Steel Four Blade Racing Fan, 17 Inch
    $31.99
    $38.00
    Steel Four Blade Racing Fan, 17 Inch
    x
                

    These four blade fans have proven to be the fan of choice due to weight, drag and cooling efficiency. Most modifieds use the 15" to 17" while late models and street stocks tend to use the 18" and 19".

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Derale Performance Plain Stainless Flex Fan
    Derale Performance Plain Stainless Flex Fan
    x
                

    Features a black powdercoated steel hub center with stainless steel blades. Great for applications where space is at a premium.

    • Rated to 8,000 RPM
    • Standard Rotation (clockwise)
    • Non-reversable
    • Mounting surface to front: 1/4"
    • Mounting surface to rear: 7/8" 
    • Fan Pilot: 5/8" (.625")
    • Blade pitch: 50°

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Nylon Flex Fan, 17 Inch
    $26.99
    Product Rating: 5.00 Stars
    Nylon Flex Fan, 17 Inch
    x
                

    One-piece nylon flex fan with reinforced construction for use up to 8000 RPM. Lightweight design (only 12 oz.) relieves stress on your water pump and bearings. Patented S-blade design provides maximum cooling and is ideal for race applications where weight is a concern.

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance

  • Speedway 6 Volt Electric Cooling Fan
    From: $99.99
    Product Rating: 4.14 Stars
    Speedway 6 Volt Electric Cooling Fan
    x
                
    Help your vintage engine keep cool by adding an electric cooling fan to your radiator. Electric fans are far more efficient than mechanical engine driven fans because they free up horsepower and only run when you want them to (when used with a fan controller, not included). Plus, most electric fans can be mounted ahead of the radiator or behind the radiator, with the more efficient location being on the engine side of the radiator.
     
    These powerful electric fans work with 6-volt electrical systems and draw 6 to 10 amps, depending on the size. The fan is supplied as a "puller" to mount behind the radiator, but it can be changed to a "pusher" by reversing the wires, flipping the fan blade and mounting in front of the radiator.
    • Available in 12", 14" or 16" diameters
    • Fans have 10 straight blades
    • High impact plastic construction
    • Sealed ball bearings for long life
    • Can push or pull
    • Works with positive or negative ground systems
    • Includes mounting ears (straps not included)

    For best results, be sure that your generator supplies enough current to power the fan. If it does not, check out our 6 Volt Alternator 91067169. It supplies additional current at idle to run electric accessories

  • Aluminum Fan Spacers with Bolts
    Aluminum Fan Spacers with Bolts
    x
                Aluminum fan spacers are required for maximum air transfer.  Fan should be 2" - 4" from radiator.  Spacers available from 1/2" to 2-1/2" thick in 1/4" increments.  Complete with bolts.  Fits 5/8" shaft. 
            
  • Aluminum Fan Shroud, 28 W x 18.5 H
    Aluminum Fan Shroud, 28 W x 18.5 H
    x
                

    This aluminum fan shroud kit can be built to fit many applications with a belt-driven fan. The adjustable collar will accommodate 15"-20" fan diameters.

    • Instruction sheet
    • Shroud
    • Fan Ring, 3” x 65”
    • Flat tab, 3” x 7”
    • Brackets, 90º (6)
    • Screws (6)

    917-4026 Instructions (PDF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Electric Fan Shroud, 21-24 Inch Tank-to-Tank x 14-17 Inch, 12 Inch Fan Hole
    Electric Fan Shroud, 21-24 Inch Tank-to-Tank x 14-17 Inch, 12 Inch Fan Hole
    x
                

    If you want to get rid of the mechanical fan and go to an electric, this is the ticket. Made of .062" aluminum, these shrouds have a wide lip to allow you to trim and fit most applications. Measure your radiator core from the inside edge to the inside edge of the tanks and then measure the core the other way. (The tanks are not included in the measurement.) 

    21"-24" Tank-to-Tank x 14"-17" w/ One 12" Fan Hole

    Fan Shroud Dimension Chart (GIF)

    Shrouds with built-in fans also available.

    Installation Instructions (PDF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • AFCO 80177 Electric Cooling Fan, 16 Inch S-Blade
    AFCO 80177 Electric Cooling Fan, 16 Inch S-Blade
    x
                

    These fans offer the best CFM vs. AMP draw of any electric units we have tested. All fans are made from glass-filled nylon and are rated at zero static. Each fan is also reversable, so it can be used as a puller or pusher.

    To reverse the fan, the fan blade can be flipped or the wires can be reversed.

    Fan Features:

    • Low amp draw
    • Mount in front or rear of radiator
    • Thin design
    • Reversible - push/pull
    • 3.25" depth at motor
    • 17.7 Amp
    • 2170 CFM

    Catalog Correction: These fans DO NOT include an on/off switch.

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance

  • Cooling Components CCI-1730 Cooling Machine Electric Fan, Style 30
    Cooling Components CCI-1730 Cooling Machine Electric Fan, Style 30
    x
                At one time or another we all have had a car overheat. These fan/shroud combos are just the ticket to avoid having it happen again. These 2500 CFM pull-type fans measure 2-5/8" deep at the motor, 2-3/8" at the mounting brackets and 1-1/2" at the high impact shroud.
    • 18.5" wide x 20.31" high
    • Can be easily reduced in size to 17-1/4" wide x 19-1/4" high
    • 12 volt operation
    • Lower engine operating temperatures
    • Saves horsepower
    • Better fuel mileage
    • Constructed of high-impact ABS material

    Note:  This fan motor requires the use of a 70 amp or larger relay.

    Fan Application Chart (GIF)

    (Style 30 fits same applications a Style 50, but Style 30 gives additional clearance at water pump.)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Electric Fan Shroud w/ Two Fans, 25-28 Inch Tank-to-Tank x 14-17 Inch
    Electric Fan Shroud w/ Two Fans, 25-28 Inch Tank-to-Tank x 14-17 Inch
    x
                

    If you want to get rid of the mechanical fan and go to an electric, this is the ticket. Made of .062" aluminum, these shrouds have a wide lip to allow you to trim and fit most applications. Measure your radiator core from the inside edge to the inside edge of the tanks and then measure the core the other way. (The tanks are not included in the measurement.) 

    Control and wiring sold separately.

    Fan Shroud Dimension Chart (GIF)

    910-4214 Instructions (PDF) 

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Walker WS55A Radiator Fan Shroud, Style D, 22 x 18 Inch
    Walker WS55A Radiator Fan Shroud, Style D, 22 x 18 Inch
    x
                

    Maximize your radiators' effectiveness with a tight-fitting fan shroud. Use of these shrouds has produced temperature drops of up to 30 degrees!

    Walker shrouds are vacuum formed from a very dense polyethylene. This high-impact, heat resistant material has a lightly textured, semigloss black finish. The cooling fan hole is not cut out so the installer can tailor that to the exact fan location and diameter.

    See Application tab for application information.

    Fan Shroud Size Chart (GIF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Dual 10 Inch Fan Shroud Combo, 22 W x 17 H
    Dual 10 Inch Fan Shroud Combo, 22 W x 17 H
    x
                

    These universal fit dual fan/aluminum shroud assemblies fit many applications. Features heavy duty SPAL fans.

    Radiator/Shroud Style Guide

    917-4007 Diagram (PDF) 

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Steel Four Blade Racing Fan, 19 Inch
    $34.99
    $36.99
    Product Rating: 5.00 Stars
    Steel Four Blade Racing Fan, 19 Inch
    x
                

    These four blade fans have proven to be the fan of choice due to weight, drag and cooling efficiency. Most modifieds use the 15" to 17" while late models and street stocks tend to use the 18" and 19".

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance

  • Flex-a-lite Model 155 Electric Cooling Fan
    Flex-a-lite Model 155 Electric Cooling Fan
    x
                

    One piece plastic shroud with full contact rubber seal that maximizes air flow. Highest CFM rating in the industry for this size. All air comes through the radiator. Universal rigid bracket mount system. No thru core mounting required. High torque, high RPM motor.

    • 4-1/4" thick at center of fan with motor
    • Threaded bracket hardware is adjustable from 19-1/4" at fan to approximately 35" maximum width
    • Draws 13.9 amps
    • Hardware is slotted both directions for width and depth of mounting

    This fan works as a puller only and has a 15" diameter with a 18" tall x 16" wide x 4-1/2" thick shroud.

    Electric Cooling Fan Instructions (PDF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

     
  • Perma-Cool 86150 Turbo Flex Reverse Stainless Flex Fan, 15 Inch, Black
    New
    Perma-Cool 86150 Turbo Flex Reverse Stainless Flex Fan, 15 Inch, Black
    x
                Turbo Flex flex fans are designed to pull even more air through the  radiator at low rpm when the speed of the vehicle isn't enough to cool  the engine's coolant system. At higher rpm, when the vehicle's speed  forces air through the radiator, the fan blades flatten out, resulting  in less power being used to spin the fan.  Ideal for applications  requiring extra cooling, use these stainless  steel flex fans with reverse rotation water pumps and serpentine drives,  on vehicles with Turbos or superchargers.  They improve overall engine  performance and gas mileage, featuring a 15" diameter and black center  hub. 
    • Reverse rotation
    • Black center
    • 1 .625" thick blades
    • Stainless Steel Blades

    Turbo-Flex 86150 Installation Instructions (PDF)

  • Maradyne Fans MFA116 Nylon Flex Fan, 16 Inch
    Maradyne Fans MFA116 Nylon Flex Fan, 16 Inch
    x
                

    One-piece nylon flex fan with reinforced construction for use up to 8000 RPM. Lightweight design (only 12 oz.) relieves stress on your water pump and bearings. Patented S-blade design provides maximum cooling and is ideal for race applications where weight is a concern.

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance

  • Cooling Fan Control for Mechanical Gauges
    Cooling Fan Control for Mechanical Gauges
    x
                

    Easy to install and adjust! This is the slickest thing we've seen in years. This adjustable box simply uses your mechaical temperature gauge as the sending unit to control your cooling fan. Includes a temperature sender (1/8" NPT fitting) which installs into your engine's water jacket. Installation is as simple as hooking up seven wires and then turning a knob on the end of the box to set the on and off temperatures for the fan.

    Features a built-in 30 amp relay to provide maximum power to your fan and it comes with a tiny LED lamp to let you know when the fan is running plus a fuselink to protect the wiring between the temperature control unit and the fan.

    • No radiator tube
    • Uses existing wiring
    • Simple hookup
    • Fully adjustable
    • Driver-controlled temperature
    • A/C compressor switch to automatically turn on fans
    • 30 amp relay inside box
    • Protective fuse link
    • For 12 volt electrical systems
    • Measures 4-3/4" x 3" x 1-1/4"

     

  • Eyes Fan Cover
    $44.99
    Eyes Fan Cover
    x
                Authentic "Eyes" design. Cast aluminum. 5-1/4" diameter and 1-1/8" deep.
            
  • Electric Fan Shroud w/ One Fan, 21-24 Inch Tank-to-Tank x 14-17 Inch
    Electric Fan Shroud w/ One Fan, 21-24 Inch Tank-to-Tank x 14-17 Inch
    x
                

    If you want to get rid of the mechanical fan and go to an electric, this is the ticket. Made of .062" aluminum, these shrouds have a wide lip to allow you to trim and fit most applications. Measure your radiator core from the inside edge to the inside edge of the tanks and then measure the core the other way. (The tanks are not included in the measurement.) 

    Control and wiring sold separately.

    Fan Shroud Dimension Chart (GIF)

    910-4212 Instructions (PDF) 

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Nylon Flex Fan, 18 Inch
    $26.99
    Product Rating: 4.50 Stars
    Nylon Flex Fan, 18 Inch
    x
                

    One-piece nylon flex fan with reinforced construction for use up to 8000 RPM. Lightweight design (only 12 oz.) relieves stress on your water pump and bearings. Patented S-blade design provides maximum cooling and is ideal for race applications where weight is a concern.

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance

  • Walker WS70 Radiator Fan Shroud, Style F, 19-1/4 x 20-1/8 Inch
    Walker WS70 Radiator Fan Shroud, Style F, 19-1/4 x 20-1/8 Inch
    x
                

    Maximize your radiators' effectiveness with a tight-fitting fan shroud. Use of these shrouds has produced temperature drops of up to 30 degrees!

    Walker shrouds are vacuum formed from a very dense polyethylene. This high-impact, heat resistant material has a lightly textured, semigloss black finish. The cooling fan hole is not cut out so the installer can tailor that to the exact fan location and diameter.

    See Application tab for application information.

    Fan Shroud Size Chart (GIF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Walker WS60 Radiator Fan Shroud, Style E, 23 x 16 Inch
    Walker WS60 Radiator Fan Shroud, Style E, 23 x 16 Inch
    x
                

    Maximize your radiators' effectiveness with a tight-fitting fan shroud. Use of these shrouds has produced temperature drops of up to 30 degrees!

    Walker shrouds are vacuum formed from a very dense polyethylene. This high-impact, heat resistant material has a lightly textured, semigloss black finish. The cooling fan hole is not cut out so the installer can tailor that to the exact fan location and diameter.

    See Application tab for application information.

    Fan Shroud Size Chart (GIF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Single 16 Inch Fan Shroud Combo, 20.5 W x 17.5 H
    Single 16 Inch Fan Shroud Combo, 20.5 W x 17.5 H
    x
                

    This universal fit single 16" electric fan and shroud assembly has the power to cool even the most potent engines. Features heavy duty SPAL fan.

    917-4084 Diagram (PDF)  

    Note: This fan directly fits 1968-72 Chevelle/Malibu and 1970-81 Camaro, but may also fit other applications as well with slight modification.

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Dual 12 Inch Fan Shroud Combo, 28 W x 17 H
    Dual 12 Inch Fan Shroud Combo, 28 W x 17 H
    x
                

    These universal fit dual fan/aluminum shroud assemblies fit many applications. Features heavy duty SPAL fans.

    Radiator/Shroud Style Guide

    917-4004 Diagram (PDF) 

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

Goto Previous PagePrevious Page
1 2 3