Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products

Shift into high gear with street rod manual transmission parts from Speedway Motors.  Featuring products from the top brands like Bert, Brinn, AFCO, and Falcon Transmission, you can count on Speedway Motors having the parts you need, when you need them.  And with a 98% in-stock rate and same day shipping, you can bet you'll get your hot rod parts fast!

"Street Rod, Clutch Release Bearings" Page 1 of 1

  • GM Stock Clutch Hydraulic Throwout Bearing
    GM Stock Clutch Hydraulic Throwout Bearing
    x
                

    Stock clutch hydraulic throwout bearing for stock-style 3-speed and 4-speed Chevy clutches only. Install simply by replacing one bolt from the front of the transmission with one of the provided studs, then shim to fit. Use 3/4" bore master cylinder.

    This bearing is made much smaller than the racing version so that it will fit behind the "thicker" stock style clutches. This redesigned new housing is much cleaner as it has no boss on the body. Plus, this design also has a retainer on it to prevent over extension and seal damage.

    GM Stock Clutch Hydraulic Throwout Bearing Instructions (PDF)

    Learn more about hydraulic release bearings and how to properly install them by reading our tech article. How to Install a Hydraulic Throwout Bearing.

  • Flathead Clutch Release Bearings
    Flathead Clutch Release Bearings
    x
                

    Its getting harder every day to find usable Flathead clutch components. We offer these new replacement clutch release bearings for your Flathead. This bearing assy is typical of those used on '35-'48 Ford passenger cars (except with the V8-60). This is the bearing and the collar.

  • GM Short Manual Release Bearing
    GM Short Manual Release Bearing
    x
                

    High performance manual clutch release bearing for most GM 3-speed and 4-speed manual transmissions. Replaces throwout bearing 614-01B-BCA.

    • Withstands high-spring pressure and high RPM operation
    • Heat-treated and blanchard-ground to ensure trueness
    • Ball bearing race packed with heat-resistant moly-based grease
    • Nylon liner and bearing retainer for cool, quiet operation
    • Overall Thickness (Length):  1.270"
    • Face Width:  2.725"
    • I.D.:  1.37"
  • Garage Sale - GM Stock Clutch Hydraulic Throwout Bearing
    Garage Sale
    Garage Sale - GM Stock Clutch Hydraulic Throwout Bearing
    x
                Please view the product's page for more information
            
  • Garage Sale - GM Stock Clutch Hydraulic Throwout Bearing
    Garage Sale
    Garage Sale - GM Stock Clutch Hydraulic Throwout Bearing
    x
                

    Stock clutch hydraulic throwout bearing for stock-style 3-speed and 4-speed Chevy clutches only. Install simply by replacing one bolt from the front of the transmission with one of the provided studs, then shim to fit. Use 3/4" bore master cylinder.

    This bearing is made much smaller than the racing version so that it will fit behind the "thicker" stock style clutches. This redesigned new housing is much cleaner as it has no boss on the body. Plus, this design also has a retainer on it to prevent over extension and seal damage.

    GM Stock Clutch Hydraulic Throwout Bearing Instructions (PDF) 

     

    This is garage sale priced because it needs to be rebuilt.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Ram Clutches 498 Manual Release Bearing for GM Transmission, Dual Disc
    Ram Clutches 498 Manual Release Bearing for GM Transmission, Dual Disc
    x
                

    High performance manual clutch release bearing for most GM 3-speed and 4-speed manual transmissions. When you switch from a stock clutch to a racing clutch, you may need a longer release bearing like this one. These are 2-1/2" in overall length,  have a 1.370" I.D. for GM-based transmissions, and have a rounded bearing face.

    • Withstands high-spring pressure and high RPM operation
    • Heat-treated and blanchard-ground to ensure trueness
    • Ball bearing race packed with heat-resistant moly-based grease
    • Nylon liner and bearing retainer for cool, quiet operation
    • Bearing Face:  Rounded
    • Overall Thickness (Length):  2.500"
    • Face Width:  2.725"
    • I.D.:  1.37"
  • Ram Clutches 498F Ford T-5 Manual Release Bearing
    Ram Clutches 498F Ford T-5 Manual Release Bearing
    x
                

    When you switch from a stock clutch to a racing clutch, you may need a longer release bearing. These are 2-1/4" in overall length and have a 1.433" I.D. for Ford T5 5-speed manual transmissions (will not fit GM T-5).

    • Bearing Face:  Rounded
    • Overall Thickness (Length):  2.25"
    • I.D.:  1.433"

     

  • Garage Sale - Ram 486 Ealy Ford 1-3/8 Clip Style Clutch Release Bearing
    Garage Sale
    Garage Sale - Ram 486 Ealy Ford 1-3/8 Clip Style Clutch Release Bearing
    x
                

    RAM uses only the highest quality materials in the construction of their throwout bearings. These have an 1-3/8" shaft diameter hole clip style bearing.

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Garage Sale - GM Stock Clutch Hydraulic Throwout Bearing
    Garage Sale
    Garage Sale - GM Stock Clutch Hydraulic Throwout Bearing
    x
                

    Stock clutch hydraulic throwout bearing for stock-style 3-speed and 4-speed Chevy clutches only. Install simply by replacing one bolt from the front of the transmission with one of the provided studs, then shim to fit. Use 3/4" bore master cylinder.

    This bearing is made much smaller than the racing version so that it will fit behind the "thicker" stock style clutches. This redesigned new housing is much cleaner as it has no boss on the body. Plus, this design also has a retainer on it to prevent over extension and seal damage.

    Instructions (PDF)

     

    This is garage sale priced because it is missing the hardware and needs to be rebuilt.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • GM T-5 to Flathead Release Bearing Adapter for 910-25610
    GM T-5 to Flathead Release Bearing Adapter for 910-25610
    x
                

    GM T-5 to Flathead Release Bearing Adapter for 910-25610

    910-25610 Instructions (PDF)

    T-5 and Adapter Tech Tips (Link)

  • Garage Sale - GM Stock Clutch Hydraulic Throwout Bearing
    Garage Sale
    Garage Sale - GM Stock Clutch Hydraulic Throwout Bearing
    x
                Please view the product's page for more information
            
  • Garage Sale - GM Stock Clutch Hydraulic Throwout Bearing
    Garage Sale
    Garage Sale - GM Stock Clutch Hydraulic Throwout Bearing
    x
                

    Stock clutch hydraulic throwout bearing for stock-style 3-speed and 4-speed Chevy clutches only. Install simply by replacing one bolt from the front of the transmission with one of the provided studs, then shim to fit. Use 3/4" bore master cylinder.

    This bearing is made much smaller than the racing version so that it will fit behind the "thicker" stock style clutches. This redesigned new housing is much cleaner as it has no boss on the body. Plus, this design also has a retainer on it to prevent over extension and seal damage.

    910-25610 Instructions (PDF)

     

    This bearing is garage sale priced because it leaks and needs to be rebuilt with kit 91025619 before use.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Ram Street Stock Hydraulic Throwout Bearing - Ford T-5
    Garage Sale
    Garage Sale - Ram Street Stock Hydraulic Throwout Bearing - Ford T-5
    x
                Please view the product's page for more information
            
  • Garage Sale - GM Stock Clutch Hydraulic Throwout Bearing
    Garage Sale
    Garage Sale - GM Stock Clutch Hydraulic Throwout Bearing
    x
                Please view the product's page for more information
            
  • Garage Sale - GM Stock Clutch Hydraulic Throwout Bearing
    Garage Sale
    Garage Sale - GM Stock Clutch Hydraulic Throwout Bearing
    x
                Please view the product's page for more information
            
  • Garage Sale - GM Stock Clutch Hydraulic Throwout Bearing
    Garage Sale
    Garage Sale - GM Stock Clutch Hydraulic Throwout Bearing
    x
                

    This t/o bearing is garage sale priced because it has been installed, run and returned.  This one does leak and needs to be rebuilt before use.  What you see is what you get.

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

    Stock clutch hydraulic throwout bearing for stock-style 3-speed and 4-speed Chevy clutches only. Install simply by replacing one bolt from the front of the transmission with one of the provided studs, then shim to fit. Use 3/4" bore master cylinder.

    This bearing is made much smaller than the racing version so that it will fit behind the "thicker" stock style clutches. This redesigned new housing is much cleaner as it has no boss on the body. Plus, this design also has a retainer on it to prevent over extension and seal damage.

    GM Stock Clutch Hydraulic Throwout Bearing Instructions (PDF)

    Learn more about hydraulic releas

  • Garage Sale - GM Stock Clutch Hydraulic Throwout Bearing
    Garage Sale
    Garage Sale - GM Stock Clutch Hydraulic Throwout Bearing
    x
                Please view the product's page for more information
            
  • Garage Sale - GM Stock Clutch Hydraulic Throwout Bearing
    Garage Sale
    Garage Sale - GM Stock Clutch Hydraulic Throwout Bearing
    x
                

    Stock clutch hydraulic throwout bearing for stock-style 3-speed and 4-speed Chevy clutches only. Install simply by replacing one bolt from the front of the transmission with one of the provided studs, then shim to fit. Use 3/4" bore master cylinder.

    This bearing is made much smaller than the racing version so that it will fit behind the "thicker" stock style clutches. This redesigned new housing is much cleaner as it has no boss on the body. Plus, this design also has a retainer on it to prevent over extension and seal damage.

    910-25610 Instructions (PDF)

     

    This bearing is garage sale priced because it has been installed and returned. This one leaks and needs to be rebuilt before use. 

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Howe Racing 82876 GM T-5 Stock Clutch Hydraulic Throwout Bearing
    Howe Racing 82876 GM T-5 Stock Clutch Hydraulic Throwout Bearing
    x
                Please view the product's page for more information