Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 50

Products

Brake

Shop Street Rod Brakes At Speedway Motors

Nobody knows street rod brakes like Speedway Motors! With the most experience in the business, you can be assured that you are getting quality hot rod brake components for the most critical part of your car. Speedway has disc brake kits and brake calipers for all types of street rods, classic Chevy and Ford trucks, and all the popular muscle cars. We also have a huge selection of master cylinders, brake boots, brake pedals, plus the brake lines, fittings and proportioning valves you need to complete any brake system replacement, rebuild, or upgrade.

Featured Products
  • Wilwood 220-0063 Bleeder Screw Assembly, Single
    Wilwood 220-0063 Bleeder Screw Assembly, Single
    (Part #8352200063)
    x
                

    This bleeder repair kit allows you to repair and salvage those calipers that have a damaged bleeder. Simply drill and tap the caliper to 1/8" pipe thread and install this replacement bleeder assembly.

    Read more about bleeding brakes in our tech article, How To Bleed Your Brake Lines

  • Straight 3/8 Inch-24 IFF to 1/8 Inch NPT Male Adapter
    Straight 3/8 Inch-24 IFF to 1/8 Inch NPT Male Adapter
    (Part #91031831)
    x
                

    Brass adapter.

    Straight 3/8"-24 IFF to 1/8" NPT Male Adapter

  • Wilwood 120-8062-LP BNSL4R Caliper Polished 1.25 Pistons, 1.10 Disc
    Wilwood 120-8062-LP BNSL4R Caliper Polished 1.25 Pistons, 1.10 Disc
    (Part #8351208062LP)
    x
                The Superlite caliper series has set the standard for many years in short track, late model, modified and open wheel competition. It has also enjoyed prominence in a variety of road-race, off-road, rally and sport driving applications. Starting at 4.40 pounds, the Forged Billet Superlite (FSL) is the newest innovation to this series from Wilwood. New and adaptive technologies have been applied providing substantial improvements in strength, fluid volume displacement, and overall performance. The Superlite caliper series has set the standard for many years in short track, late model, modified and open wheel competition. It has also enjoyed prominence in a variety of road-race, off-road, rally and sport driving applications. Starting at 4.40 pounds, the Forged Billet Superlite (FSL) is the newest innovation to this series from Wilwood. New and adaptive technologies have been applied providing substantial improvements in strength, fluid volume displacement, and overall performance.   The FSL body design is a highly efficient product of computer generated solid modeling and stress analysis technology. Each caliper features closed end bridges with a radial transition to the piston body housings. The elimination of machined steps and sharp shoulders in this critical area provides a measurable increase in overall body strength and resistance to deflection under load. Center bridge bolts replace cotter pins to provide additional support and allow quick access with positive brake pad retention. Clamping force, structural deflection, and volume displacement tests have proven the superior strength and efficiency of the FSL. On-track testing has proven driver satisfaction. The bottom line is better stopping power with less pedal travel.   The superior strength of this innovative new caliper is combined with proven performance features from other Wilwood designs. Each caliper is equipped with Wilwood's replaceable SRS stainless steel bridge plates. SRS plates eliminate the bridge wear caused by pad gouging and extend the service life of the caliper body. The spring-loading action of the SRS plates also eliminates pad rattle and dampens the vibration harmonics that contribute to squeal under braking. Other standard Wilwood features include high-temperature, square faced o-ring seals for positive sealing, controlled piston retraction, and long service life in high heat conditions. Stainless steel pistons are used to resist corrosion and retard heat transfer from the pads. Fluid tubes are vibration dampened to resist stress fractures and reduce damage caused by track debris. Two-piece bleed screw assemblies provide long, reliable service life and are easily replaced if necessary.   Forged Billet Superlite calipers are a direct replacement for all Wilwood Superlite and similar competitive brand calipers with 3.50" centered mounting tabs. Calipers are available in the popular 1.75", 1.62", 1.38", 1.25" and 1.12" piston sizes for .81", 1.10" and 1.25" rotor widths. FSL calipers use the same 7420 type bridge bolt brake pad used in all Superlite 6 piston calipers. The full range of PolyMatrix pad compounds is available to match brake response and heat range to any application.
            
  • Regular Jaguar XKE Flange Kit
    Regular Jaguar XKE Flange Kit
    (Part #91645325)
    x
                Splines on stock Jag hubs must be machined off, press these flanges on and weld in place. Accepts 4-3/4" bolt pattern wheels.
            
  • GM Caliper Slider Bolt
    $2.99
    Product Rating: 4.50 Stars
    GM Caliper Slider Bolt
    (Part #8352300542)
    x
                The overall length of these slide bolts is 4-3/8".  The underhead length is 3-3/8".  The thread on the bolts is 7/16-20 (US fine). 
            
  • 12 x 2 Brake Drum for Bendix Style 1937-48 Ford Brakes
    12 x 2 Brake Drum for Bendix Style 1937-48 Ford Brakes
    (Part #91065400)
    x
                We offer these new iron 12" x 2" brake drums with a 5 on 5-1/2" bolt circle, which are impossible to find elsewhere. Use this brake drum with our Bendix Style self-energizing 12" x 1-3/4" or 12" x 2" backing plate assemblies for 1937-1948 Ford.
            
  • Wilwood 140-13582-D AERO6 SRP Front Disc Brake Kit, 14 Inch
    Wilwood 140-13582-D AERO6 SRP Front Disc Brake Kit, 14 Inch
    (Part #83514013582D)
    x
                

    These AERO6 calipers from Wilwood were designed for the specific purpose of providing big capacity braking with large diameter rotors for heavy weight and extreme duty vehicles. For cars, it’s the biggest of the big providing big brake performance for show and dual purpose street and track vehicles. For trucks and SUV’s, it provides big stopping power for towing, off-road, and enhanced braking with wheel and tire upgrades. Kits listed for specific vehicles are fully compatible with OE master cylinder output and ABS function. Directional staggered vane 14.00” to 14.25”rotors provide maximum cooling for sustained high heat durability.

    • Spindle Type: Factory Disc Spindle
    • Mount Type: Radial
    • Wheel Diameter: 18 Inches
    • Caliper: 120-13290-BK, 120-13289-BK
      • Type: AERO6
      • Finish: Black Powder Coat
      • Piston Count: 6
      • Piston Type: Stainless
      • Mount Type: Radial
      • Brake Pad Compound: BP-10
    • Rotor: 160-8397-BK, 160-8396-BK
      • Type: SRP Drilled Rotor
      • Style: SRP Drilled and Slotted
      • Surface Finish: Black Electro Coat
      • Material: Iron
      • Diameter: 14"
      • Width: 1.25"
      • Vane Count: 72 CV
      • Design Type: SRP-BLK
      • Dynamically Balanced
    • Rotor Hat: 170-13584
      • Type: Big Brake Dynamic Bobbin Mount Hat - Flared Bell
      • Material: Aluminum
      • Finish Color: Black E-Coat
      • Hat Offset: 1.55"
      • Bolt Circle: 5 x 4.72"
      • Stud Diameter: .52"

    Note: Brake Kits are designed to fit OE Factory Spindles. Contact Speedway Motors if you are not using a factory spindle.

    Assembly Instructions (PDF) 

    Wheel Clearance Diagram (PDF) 

    Vehicle Compatibility Listing:

    • BMW 128i 2008-2013 All
    • BMW 135i 2008-2012 All
    • BMW 323i 2006-2011 Sedan (Canada)
    • BMW 325i 2006 Sedan
    • BMW 328i 2007-2009 All
    • BMW 328i 2010-2011 All - RWD, except xi
    • BMW 328i 2012 Convertible - RWD
    • BMW 328i 2012 Coupe - RWD
    • BMW 330i 2006 Sedan
    • BMW 335i 2007-2011 All except xi
    • BMW 335i 2012 Convertible - RWD
    • BMW 335i 2012 Coupe - RWD
  • Lokar EHB-7000F Floor Mount Emergency Hand Brake, Chrome Finish
    Lokar EHB-7000F Floor Mount Emergency Hand Brake, Chrome Finish
    (Part #4917000)
    x
                

    This Lokar Floor Mount Emergency Hand Brake features a chrome plated steel e brake handle and is designed after the automotive industry standards. The ratchet cut gear plate and lock are heat treated for strength and safety. Special feature includes 4-point mounting capabilities for floor mount or side mounting for custom applications.

    Comes complete with clevis for installation with Lokar Emergency Brake Cables, Lokar # EC-80FU, Speedway Motors # 491-80FU suggested below. Cables are sold separately.

    Lokar Install Tip:  Every think about mounting the floor mount hand brake sideways in front of your seat?  You can!

Filter

"Street Rod, Brake" Page 1 of 50

Page 1 of 50

  • Brake Pedal Pad, Round, Rubber
    Brake Pedal Pad, Round, Rubber
    (Part #91031200)
    x
                Rubber brake pedal cover has a concentric circular pattern like original equipment. 1/4" NPT stud (the shank is .650" in length). Molded hard-rubber construction and is 3-1/2" dia. 
            
  • Wilwood 140-11743 NDP Radial Mount Front Brake Kit, Sunbeam Tiger
    Wilwood 140-11743 NDP Radial Mount Front Brake Kit, Sunbeam Tiger
    (Part #83514011743)
    x
                Radial mounting provides secure and accurate installation of the Forged Billet Narrow DynaPro four piston caliper with large diameter rotors for this group of rear wheel drive sport compacts. These kits are the perfect compliment to wheel, tire, and suspension upgrades on daily drivers &, competition vehicles. This kit is engineered specific for 64-67 Sunbeam Tiger to maintain full compatibility with the OE spindle. Forged aluminum 4 bolt hubs and hats round out the assembly. Optional caliper finishes and rotor designs provide choices that enable the builder to personalize the style and optimize brake performance.

    Installation Instructions (PDF)

  • Wilwood 140-7140-DP FDL Rear Brake Kit, New Big Ford 2.50 Off
    Wilwood 140-7140-DP FDL Rear Brake Kit, New Big Ford 2.50 Off
    (Part #8351407140DP)
    x
                This group of FDL Pro-Series rear disc kits provides a complete solution for popular muscle car rear axles that require a parking brake. Forged billet Dynalite four piston calipers, 12.19"  one-piece drum/rotors, and high friction pads provide optimized and balanced braking for all types of custom performance street/strip and show machines. The neatly hidden internal shoe system provides a clean installation with superior static holding power for parking. Optional caliper finishes and rotor designs enable the builder to personalize the style and optimize brake performance for every individual application.

    Installation Instructions (PDF)

  • Wilwood 160-8747 GT 48 Curved Vane Spec 37 Iron Rotor, 12.6 Inch
    Wilwood 160-8747 GT 48 Curved Vane Spec 37 Iron Rotor, 12.6 Inch
    (Part #8351608747)
    x
                Wilwood's GT 48 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with our proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest, vibration free performance at any speed. These rotors provide the highest cooling capacity and longest service life for extreme braking short tracks and road course competition.
    • Spec-37 Heavy wall Castings
    • Suitable for moderate temperature racing to street use.
  • Mild Steel -3 AN Brake Line Kit
    Mild Steel -3 AN Brake Line Kit
    (Part #6178560)
    x
                

    This brake line kit bridges the gap between our stainless steel -3 AN kit, and our steel inverted flare version. It includes a 25 foot roll of 3/16" steel brake line, four 18" stainless steel braided hoses and enough -3 AN fittings to plumb your brake lines. 

    Since we don't know what calipers and master cylinder you will be using, these fittings are sold separately.

     
    Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings
  • Wilwood 160-12292 GT 36 Curved Vane Spec 37 Iron Rotor, 12.19 Inch
    Wilwood 160-12292 GT 36 Curved Vane Spec 37 Iron Rotor, 12.19 Inch
    (Part #83516012292)
    x
                Wilwood's GT 36 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with our proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest braking available.
    • Spec-37 Heavy wall Castings
    • Suitable for high temperature racing to street use.
  • Wilwood 120-8000-RSP BNSL6R Caliper,RH, 1.62/1.12/1.12 Pist, 1.25 Disc
    Wilwood 120-8000-RSP BNSL6R Caliper,RH, 1.62/1.12/1.12 Pist, 1.25 Disc
    (Part #8351208000RSP)
    x
                The billet SL6R series adds the versatility and convenience of radial mounting to this widely popular caliper group. Radial mounting simplifies adaptation and provides two planes of adjustment for accurate alignment over the disc. These calipers integrate "Big Brake" style with Wilwood's latest technology to generate big stopping power in extreme environments over a broad range of vehicle applications. The key to the superior performance of the SL6R comes from the extremely durable and efficient body design. Starting at 4.84 pounds it is the product of computer generated solid modeling and FEA stress analysis technology. Full length stiffening ribs and a reinforced radial transition from the piston bore housings to the closed end bridges has produced the strongest SL caliper bodies ever built. When compared to open bridge calipers that use tube or stand spacers between the body halves, the closed end bridge design is measurably stronger with less separation or deflection under load. Additional strength and resistance to deflection comes from the four high-strength steel end bridge bolts. A fifth center bridge bolt provides even more overall strength and easy access to the pads without the need to remove the caliper from the mount.    A unique six-piston differential bore configuration provides balanced loading for even pad wear in sustained high heat environments. The standard SL6R calipers feature one-piece stainless steel pistons. Stainless is used for its slow he
            
  • Aluminum Tube Nut Coupler, AN4 1/4 Inch
    Aluminum Tube Nut Coupler, AN4 1/4 Inch
    (Part #6176056)
    x
                

    Use these tube nut couplers in conjunction with our tube sleeves (sold seperately) to seal bulkhead fittings to fuel cells, oil tanks and other applications using hard line fitting situations. You need to flare the tube to 37° to match the AN fittings. Not for use with 45° flared lines.

    Fitting Thread Application Chart (GIF)

  • Wilwood 160-11837-B GT 48 Curved Vane Spec 37 Iron Rotor, 11.75 Inch
    Wilwood 160-11837-B GT 48 Curved Vane Spec 37 Iron Rotor, 11.75 Inch
    (Part #83516011837B)
    x
                Wilwood's GT 48 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with our proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest, vibration free performance at any speed. These rotors provide the highest cooling capacity and longest service life for extreme braking short tracks and road course competition.
    • Spec-37 Heavy wall Castings
    • Suitable for high temperature racing to street use.
  • Wilwood 120-13529-BK Forged Dynalite-M Disc Brake Caliper, Black
    Wilwood 120-13529-BK Forged Dynalite-M Disc Brake Caliper, Black
    (Part #83512013529BK)
    x
                

    The Forged Billet Dynalite-M is specifically designed to enhance outboard clearance and is the basis for Wilwood’s new Classic Style brake kits. The latest applied developments and innovations in caliper design and manufacturing processes have resulted in substantial improvements in strength and performance over all comparable models.

    • Aluminum construction
    • Black Powder coat finish
    • 3.3 Pounds
    • Mount Center: 5.25 Inches
    • Mount Type: Lug
    • Mount Side: Universal
    • Type: Stainless
    • 4 Piston
    • Minimum Rotor Diameter: 10.00"
    • Maximum Rotor Diameter: 13.06"
    • Rotor Width: 1"
    • Piston Bore: 1.75"
    • Inlet Thread Size: 1/8-27 NPT
    • Strongest calipers in it's class, with weights starting at 2.80 pounds
  • GM Metric Caliper Fitting, 10mm - 1.5 to -3 AN, Male Adapter Connector
    GM Metric Caliper Fitting, 10mm - 1.5 to -3 AN, Male Adapter Connector
    (Part #6174043)
    x
                

    Made from high-quality steel, these bulkhead adapters from Speedway give you an easy way to connect lines through firewalls or frames.

    These fittings have AN at one end and 10mm-1.5" on the other end. It can be screwed into a GM metric caliper with 10mm-1.5" threads if you use our crush washers (part number 617-3642). 

    Steel Male Adapter Connector Fitting 

    • AN to IFM all steel adapter
    • 10mm - 1.5 to -3 AN

     

  • Wilwood 160-2979 GT 48 Curved Vane Spec 37 Iron Rotor, 12.72 Inch
    Wilwood 160-2979 GT 48 Curved Vane Spec 37 Iron Rotor, 12.72 Inch
    (Part #8351602979)
    x
                Wilwood's GT 48 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with our proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest, vibration free performance at any speed. These rotors provide the highest cooling capacity and longest service life for extreme braking short tracks and road course competition.
    • Spec-37 Heavy wall Castings
    • Suitable for moderate temperature racing to street use.
  • Hawk HB103A-.590 Performance 1969-1977 Mid-Size HPS Brake Pads, DTC-15
    Hawk HB103A-.590 Performance 1969-1977 Mid-Size HPS Brake Pads, DTC-15
    (Part #919103A)
    x
                

    Get superior stopping power with Hawk Performance! Hawk Performance brake pads have been successful in virtually all forms of motorsports for over 16 years. This success helps Hawk Performance enjoy the benefits of the “Win on Sunday, Sell on Monday,” philosophy. Hawk is one of few brake pad manufacturers that can deliver on the promise, “Race Proven – Street Legal.”

    Upgrade your 1969-77 GM Midsize braking system with these premium pads.

    Tech Tip:  Only use full metallic pads on coated rotors.

    Sold as a set of 4, 1 set will be needed to outfit 2 calipers.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

     

  • Replacement Carbon Steel Brake Rotors
    Replacement Carbon Steel Brake Rotors
    (Part #715DB206)
    x
                For use on our spindle mount wire wheels. Bolts to back side of spindle mont wheels. Rotors are made from 3/16" carbon steel, and are 10" in diameter. These rotors are ground for flatness and have been clear zinc plated.
            
  • Ford F-150 11.75 Inch Brake Rotor
    Ford F-150 11.75 Inch Brake Rotor
    (Part #91031068)
    x
                5 x 5-1/2". This rotor was originally used on front of most Ford F-150 two wheel drive trucks from 1973 to approximately 1993. 11.75" diameter. 
            
  • Wilwood 160-7100 SRP 30 Vane Iron Rotor, 11 Inch
    Wilwood 160-7100 SRP 30 Vane Iron Rotor, 11 Inch
    (Part #8351607100)
    x
                SRP Drilled Performance Rotors feature a specially engineered directional cross drill and face slot pattern that improve brake response and pad performance throughout the entire range of light to heavy braking. The venting and cleaning action of the holes and slots will reduce pad glaze and disperse gasses and heat generated during the pad to rotor interface. The holes and slots also inhibit irregular pad compound build-up on the rotor faces resulting in smoother engagement and improved pedal response in all conditions. The material removed also contributes to lower rotating and unsprung suspension weight.
    • Premium grade, medium weight castings.
    • Suitable for moderate temperature racing to street use.
    • For ultimate durability in racing use comparable ULHP or GT rotors.
  • Stainless Steel Brake Line, 3/16 Inch
    Stainless Steel Brake Line, 3/16 Inch
    (Part #6178510)
    x
                

    Our 3/16" stainless steel tubing is made from 304 grade (rated at 6000 psi) which is double annealed to allow easy flaring.

    NOTE: This line is intended to be used in conjunction with 37 degree AN # 3 style fittings which make use of a single flare. Stainless steel line will not work with 45 degree double flare 3/8"-24 flare nuts. We strongly suggest that the 37 degree single flare (flaring tool # 910-89524) be used when flaring this line for the AN # 3 tube nuts and sleeves.

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

    Brake System Builder Tip (GIF)

  • Hawk HB119A.594 Performance 1978-Up HPS Brake Pads, DTC-15
    Hawk HB119A.594 Performance 1978-Up HPS Brake Pads, DTC-15
    (Part #919119A)
    x
                

    Get superior stopping power with Hawk Performance! Hawk Performance brake pads have been successful in virtually all forms of motorsports for over 16 years. This success helps Hawk Performance enjoy the benefits of the “Win on Sunday, Sell on Monday,” philosophy. Hawk is one of few brake pad manufacturers that can deliver on the promise, “Race Proven – Street Legal.”

    • Increased stopping power
    • High friction/torque hot or cold
    • Gentle on rotors
    • Extended pad life
    • Low dust
    • Virtually noise-free

    Tech Tip:  Only use full metallic pads on coated rotors.

    Sold as a set of 4, 1 set will be needed to outfit 2 calipers.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

     

  • Wilwood 160-11839-B GT 48 Curved Vane Spec 37 Iron Rotor, 12.19 Inch
    Wilwood 160-11839-B GT 48 Curved Vane Spec 37 Iron Rotor, 12.19 Inch
    (Part #83516011839B)
    x
                Wilwood's GT 48 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with our proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest, vibration free performance at any speed. These rotors provide the highest cooling capacity and longest service life for extreme braking short tracks and road course competition.
    • Spec-37 Heavy wall Castings
    • Suitable for high temperature racing to street use.
  • Wilwood 140-13581-D Dynapro 6 Front Disc Brake Kit, 12.88 Inch, Black
    Wilwood 140-13581-D Dynapro 6 Front Disc Brake Kit, 12.88 Inch, Black
    (Part #83514013581D)
    x
                Please view the product's page for more information
            
Goto Previous PagePrevious Page
1 2 3 4 5 ... 50