Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Street Rod Brakes At Speedway Motors

Nobody knows street rod brakes like Speedway Motors! With the most experience in the business, you can be assured that you are getting quality hot rod brake components for the most critical part of your car. Speedway has disc brake kits and brake calipers for all types of street rods, classic Chevy and Ford trucks, and all the popular muscle cars. We also have a huge selection of master cylinders, brake boots, brake pedals, plus the brake lines, fittings and proportioning valves you need to complete any brake system replacement, rebuild, or upgrade.

"Street Rod, Brake Pedal Assemblies" Page 1 of 2

  • Wilwood 340-1290 Forward Swing Mount Single Master Cylinder Pedal
    Wilwood 340-1290 Forward Swing Mount Single Master Cylinder Pedal
    x
                

    This pedal is often used as a clutch pedal with a single outlet master cylinder, or as a brake pedal in conjunction with dual outlet, tandem master cylinders on four wheel brake equipped vehicles. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad.

    Swing mount has a 7.00 to 1 pedal ratio.

    Pedal Dimensions (Link)

    Detailed Schematic of Pedal 

    835-3401290 Instructions (PDF) 

     

  • Universal Frame Rail Power Brake Pedal Mount
    Universal Frame Rail Power Brake Pedal Mount
    x
                
    • Mounting bracket sets off frame rail 2 inches for clearance 
    • Push rod center is 4 inches from frame rail mounting bracket
    • Uses standard GM booster with 4 bolt mounting holes, 3-3/8" centers
    • 10-1/2" tall brake pedal arm with clevis and push rod
    • Pedal arm has 1/2" hole for pedal pad.
    • Mounting hardware included
  • Under-Dash Brake Pedal Assembly, Dual Diaphragm
    Under-Dash Brake Pedal Assembly, Dual Diaphragm
    x
                

    This universal bolt-on swing pedal assembly provides a secure way to mount the brake power booster and master cylinder on the firewall when upgrading brakes on a wide range of cars and trucks. Pedal bracket can be trimmed to fit your application and has holes to place pedal pivot point at 7", 8.5", 10", 11.5", or 13" from the firewall.

    • Includes a dual feed 1" bore master cylinder
    • Dual front outlets 1/2"-20 IFF
    • Dual rear outlets 9/16"-18 IFF
    • Plugs are included for un-used ports
    • Dual diaphragm 7" diameter booster
    • Pedal Length:  13-1/8" from pivot point to pad hole
    • Mount Bracket:  14" long
    • Booster Bolt Pattern:  3-3/8" square

    Booster Tech Tip (GIF)

  • Under-Dash Brake Pedal Assembly, Single Diaphragm
    Under-Dash Brake Pedal Assembly, Single Diaphragm
    x
                

    This universal bolt-on swing pedal assembly provides a secure way to mount the brake power booster and master cylinder on the firewall when upgrading brakes on a wide range of cars and trucks. Pedal bracket can be trimmed to fit your application and has holes to place pedal pivot point at 7", 8.5", 10", 11.5", or 13" from the firewall.

    • Includes a dual feed 1" bore master cylinder
    • Dual front outlets 1/2"-20 IFF
    • Dual rear outlets 9/16"-18 IFF
    • Plugs are included for un-used ports
    • Single diaphragm 7" booster

    Booster Tech Tip (GIF)

  • Wilwood Forward Swing Dual Master Cylinder Brake Pedal
    Wilwood Forward Swing Dual Master Cylinder Brake Pedal
    x
                

    This popular pedal mounts two brake master cylinders with a bias balance bar. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    • The swing type pedal has a ratio of 7:1
    • Includes balance bar
    • This popular pedal mounts two brake master cylinders with a bias balance bar

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Universal Standard Brake Pedal Assembly, T-Bucket
    Universal Standard Brake Pedal Assembly, T-Bucket
    x
                

    This standard brake pedal assembly is the same as that featured on our T-Bucket kits. It is able to be used for many universal applications.

    Includes:

    • Brake Pedal
    • Standard Dual Feed Master Cylinder
    • Push Rod
    • Clevis
    • Pedal Pad Mount 
  • Wilwood 340-1289 Floor Mount Clutch Pedal
    Wilwood 340-1289 Floor Mount Clutch Pedal
    x
                This pedal can be used for either a hydraulic clutch release or brake master cylinder when used with Wilwood's tandem feed master cylinder and adapter kit. 
    • 6:1 pedal ratio
    • All aluminum frame and arm with steel pivots
    • Anti-skid pedal pad
    • Mounting flange is a vertical pattern on a 2-1/4" on center

    835-3401289 Dimensions (Link)

    Brake Pedal and Blanace Bar Instruction Guide (PDF) 

  • Universal Under Dash Brake Pedal Mount
    Universal Under Dash Brake Pedal Mount
    x
                
    • Mounts below dash
    • Sandwiches firewall between bracket and booster/master
    • Includes adjustable pushrod
  • Lokar BCA-9503 90 Billet Aluminum Direct Fit Brake & Clutch Pedal Arm
    New
    Lokar BCA-9503 90 Billet Aluminum Direct Fit Brake & Clutch Pedal Arm
    x
                Lokar Shifter and Hand Brake Boots are black Naugahyde and all sets include a boot, polished stainless base ring, or billet aluminum ring with ball-milled edge and stainless screws. 
    • Our Classic Shifter Boot is designed with a polished stainless bezel on top of the boot which fits over the shifter lever.
    • It also includes a foam rubber seal to eliminate air flow from the floor through the boot.
    • All boots hug the shifter lever and there are no unsightly pull ties or laces.
  • 1933-1934 Ford Frame Master Cylinder & Frame Rail Mount
    1933-1934 Ford Frame Master Cylinder & Frame Rail Mount
    x
                

    The ideal combination for a clean and simple 1933-1934 Ford. The master cylinder has been remanufactured and is suitable for 4-wheel disc or disc/drum brake setups. The bracket can be bolted or welded to the left frame rail (boxed or stock).

    Kit includes a dual feed master cylinder, frame bracket, steel pedal arm that can be easily modified for driver comfort and hardware.

    916-31933 Instructions (pdf) 

    Brake System Builder's Tip (Link)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.  

  • Lokar BCA-9501 90 Billet Alum Direct Fit Auto Brake Pedal Arm, XL Pad
    New
    Lokar BCA-9501 90 Billet Alum Direct Fit Auto Brake Pedal Arm, XL Pad
    x
                Lokar Shifter and Hand Brake Boots are black Naugahyde and all sets include a boot, polished stainless base ring, or billet aluminum ring with ball-milled edge and stainless screws. 
    • Our Classic Shifter Boot is designed with a polished stainless bezel on top of the boot which fits over the shifter lever.
    • It also includes a foam rubber seal to eliminate air flow from the floor through the boot.
    • All boots hug the shifter lever and there are no unsightly pull ties or laces.
  • Lokar BCA-9505 180 Billet Direct Fit Auto Brake Pedal Arm, XL Pad
    New
    Lokar BCA-9505 180 Billet Direct Fit Auto Brake Pedal Arm, XL Pad
    x
                Lokar Shifter and Hand Brake Boots are black Naugahyde and all sets include a boot, polished stainless base ring, or billet aluminum ring with ball-milled edge and stainless screws. 
    • Our Classic Shifter Boot is designed with a polished stainless bezel on top of the boot which fits over the shifter lever.
    • It also includes a foam rubber seal to eliminate air flow from the floor through the boot.
    • All boots hug the shifter lever and there are no unsightly pull ties or laces.
  • Wilwood Reverse Swing Mount Dual Master Cylinder Pedal Assembly
    Wilwood Reverse Swing Mount Dual Master Cylinder Pedal Assembly
    x
                

    Dual reverse pedal mounts two brake master cylinders with a bias balance bar. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments. 6.25 to 1 pedal ratio. Master cylinders have single 1/8" NPT outlets.

    • Positions master cylinders inside the firewall away from engine heat
    • Aluminum frame and arm construction
    • Steel pivots and mounting studs
    • Anti-skid pedal pad

    910-29972 Instructions (PDF)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Garage Sale - 1947-54 Chevy Pickup Frame Pedal Mount Bracket
    Garage Sale
    Garage Sale - 1947-54 Chevy Pickup Frame Pedal Mount Bracket
    x
                

    This is the same bracket that comes with our 1947-54 brake pedal assembly.

     

    These brackets are garage sale priced because we do not usually sell them separately.  What you see is what you get. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

     

  • Garage Sale - Brake Pad Arm & Booster Plate
    Garage Sale
    Garage Sale - Brake Pad Arm & Booster Plate
    x
                

    Clearance!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Lokar BCA-9506 180 Billet Alum Direct Fit Brake & Clutch Pedal Arm
    New
    Lokar BCA-9506 180 Billet Alum Direct Fit Brake & Clutch Pedal Arm
    x
                Lokar Shifter and Hand Brake Boots are black Naugahyde and all sets include a boot, polished stainless base ring, or billet aluminum ring with ball-milled edge and stainless screws. 
    • Our Classic Shifter Boot is designed with a polished stainless bezel on top of the boot which fits over the shifter lever.
    • It also includes a foam rubber seal to eliminate air flow from the floor through the boot.
    • All boots hug the shifter lever and there are no unsightly pull ties or laces.
  • 1935-1940 Ford Frame Rail Mount Brake Pedal Assembly
    1935-1940 Ford Frame Rail Mount Brake Pedal Assembly
    x
                

    This kit adapts our brake booster/master cylinder (not included, sold separately at right) to the left frame rail (boxed or open channel) of a reproduction Early Ford frame or one without it's original crossmember. Bracket bolts to frame (slight trimming may be required). Sturdy, steel pedal arm can easily be heated and bent to clear any obstacles your car may have. Round pedal pad screws onto pedal to finish the installation. 

    Pedal assembly kit includes zinc plated bracket, pedal, pedal pad and hardware.

    Will NOT work in conjunction with the factory clutch pedal.  Intended for use with an Automatic Transmission. 

  • 1949-1954 Chevy Frame Rail Mount Pedal Assemblies
    1949-1954 Chevy Frame Rail Mount Pedal Assemblies
    x
                

    This kit adapts our brake booster/master cylinder (not included, sold separately) This pedal assembly mounts to the OEM shelf of the stock transmission crossmember. No cutting or trimming required. Sturdy, steel pedal arm can easily be heated and bent to clear any obstacles your car may have.

    Pedal assembly kit includes black powder coated bracket, pedal, and hardware.

  • Wilwood 340-5181 Reverse Swing Mount Brake Pedal
    Wilwood 340-5181 Reverse Swing Mount Brake Pedal
    x
                

    Dual reverse pedal mounts two brake master cylinders with a bias balance bar. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments. 6.25 to 1 pedal ratio.

    • Positions master cylinders inside the firewall away from engine heat
    • Aluminum frame and arm construction
    • Steel pivots and mounting studs
    • Anti-skid pedal pad

    835-3405181 Instructions (PDF)

  • 1937-1939 Chevy Frame Rail Mount Pedal Assemblies
    1937-1939 Chevy Frame Rail Mount Pedal Assemblies
    x
                

    This kit adapts our brake booster/master cylinder (not included, sold separately at right) to the left frame rail (boxed or open channel) of a '37-'39 Chevy frame. Bracket bolts to frame (slight trimming may be required). Sturdy, steel pedal arm can easily be heated and bent to clear any obstacles your car may have. Round pedal pad screws onto pedal to finish the installation. 

    Pedal assembly kit includes zinc plated bracket, pedal, pedal pad and hardware.

  • Universal Stainless Sleeved Brake Pedal Assembly
    Universal Stainless Sleeved Brake Pedal Assembly
    x
                

    This stainless steel brake pedal assembly is the same as that featured in the T-Bucket kits. It is able to be used for many universal applications.

    Includes:

    • Brake Pedal
    • Stainless Sleeved Dual Feed Master Cylinder
    • Push Rod
    • Clevis
    • Pedal Pad Mount

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

     

  • Universal Under Dash 90 Degree Pedal Assembly
    Universal Under Dash 90 Degree Pedal Assembly
    x
                
    • Universal right angle bracket
    • Converts front to back pedal motion into left to right
    • Accepts our 7" boosters
  • Pedal Pad Mount Bracket
    $5.99
    Product Rating: 5.00 Stars
    Pedal Pad Mount Bracket
    x
                

    Pedal pad mount bracket for Universal Pedal Kit # 916-31944.

  • Garage Sale - Brake Pedal 35-40 Ford X-MNT
    Garage Sale
    Garage Sale - Brake Pedal 35-40 Ford X-MNT
    x
                

    This is garage sale priced because it is missing the pedal pad and was installed.

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

     

    Plain steel 1935-40 crossmember mounted brake pedal. 

  • Lokar BCA-9502 90 Billet Aluminum Direct Fit Brake & Clutch Pedal Arm
    New
    Lokar BCA-9502 90 Billet Aluminum Direct Fit Brake & Clutch Pedal Arm
    x
                Lokar Shifter and Hand Brake Boots are black Naugahyde and all sets include a boot, polished stainless base ring, or billet aluminum ring with ball-milled edge and stainless screws. 
    • Our Classic Shifter Boot is designed with a polished stainless bezel on top of the boot which fits over the shifter lever.
    • It also includes a foam rubber seal to eliminate air flow from the floor through the boot.
    • All boots hug the shifter lever and there are no unsightly pull ties or laces.
  • Garage Sale - Spike Chassis 951040 Brake Pedal
    Garage Sale
    Garage Sale - Spike Chassis 951040 Brake Pedal
    x
                

    Spike brake pedals are fixture fabricated from 4130 chromoly and nickel plated.

     

    This is garage sale priced because it is rusty.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Lokar XBCA-9503 Midnight Series 90 Brake/Clutch Pedal Arm w/Std Pad
    New
    Lokar XBCA-9503 Midnight Series 90 Brake/Clutch Pedal Arm w/Std Pad
    x
                Direct Fit assemblies are designed to replace original brake and clutch pedal arms.
    Features:
    • Direct replacement of the original brake & clutch pedal arms
    • Billet aluminum construction
    • Windowed arms complement other Lokar products
    • Bronze pivot bushing for increased durability
    • Unique styling
    • Brushed or black finish
    Available for:
    • Kugel Komponents 90 & 180 degree pedal assemblies
    • Tri-Five Chevy
    • Camaro
    • Chevelle
    • Nova/Chevy II
    • C-10 Truck
  • Wilwood Dual Master Cylinder Floor Mount Pedal Assembly
    Wilwood Dual Master Cylinder Floor Mount Pedal Assembly
    x
                

    This is one of racing's most popular pedals for mounting two brake master cylinders with a bias balance bar. The floor mount pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments. 

    • Floor mount assembly
    • Has a 6:1 pedal ratio
    • Includes brake balance bar

    910-29976 Instructions (PDF)

    910-29976 Specs Sheet

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • US Brake Swing Mount Dual Master Cylinder Pedal
    US Brake Swing Mount Dual Master Cylinder Pedal
    x
                

    This combo pairs a Wilwood pedal assembly with two US Brake master cylinders. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    Has a 7:1 pedal ratio. Specify m/c bore sizes in Comments box of your Shopping Cart at Checkout: 3/4", 7/8", or 1".

    • External return spring maintains positive pedal feel, prolongs pad life
    • Polished smooth bores
    • One-piece alumiunum construction

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • 1940-48 Chevy Car Frame Rail Mount Pedal Assemblies
    1940-48 Chevy Car Frame Rail Mount Pedal Assemblies
    x
                

    This kit adapts our brake booster/master cylinder (not included) to the left frame rail (boxed or open channel) of a 1940-48 Chevy passenger car frame. Bracket bolts to frame (slight trimming may be required). Sturdy, steel pedal arm can easily be heated and bent to clear any obstacles your car may have. Round pedal pad screws onto pedal to finish the installation. 

    Pedal assembly kit includes zinc plated bracket, pedal, pedal pad and hardware.

  • Dual Reverse-Mount Master Cylinder Pedal Kit
    Dual Reverse-Mount Master Cylinder Pedal Kit
    x
                

    This Wilwood pedal mounts two US Brake master cylinders with a bias balance bar and positions the master cylinders inside the firewall and away from engine heat. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable (at right) for quick on-track adjustments.

    • US Brake Master Cylinders
      • External return spring maintains positive pedal feel, prolongs pad life
      • Polished smooth bores
      • One-piece alumiunum construction

    6.25:1 pedal ratio. Each master cylinder has a single 1/8" NPT outlet. Specify m/c bore sizes.

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Lokar XBCA-9501 Midnight Series 90 Direct Fit Brake Pedal Arm w/XL Pad
    New
    Lokar XBCA-9501 Midnight Series 90 Direct Fit Brake Pedal Arm w/XL Pad
    x
                Direct Fit assemblies are designed to replace original brake and clutch pedal arms.
    Features:
    • Direct replacement of the original brake & clutch pedal arms
    • Billet aluminum construction
    • Windowed arms complement other Lokar products
    • Bronze pivot bushing for increased durability
    • Unique styling
    • Brushed or black finish
    Available for:
    • Kugel Komponents 90 & 180 degree pedal assemblies
    • Tri-Five Chevy
    • Camaro
    • Chevelle
    • Nova/Chevy II
    • C-10 Truck
  • Black Universal Brake Pedal Bracket
    Black Universal Brake Pedal Bracket
    x
                
    • Black Powdercoated finish
    • Mounting bracket sets off frame rail 2 inches for clearance
    • Uses standard GM booster with 4 bolt mounting holes, 3-3/8" centers
    • 10-1/2" tall brake pedal arm with clevis
    • Pedal arm has 1/2" hole for pedal pad. (Included)
    • Mounting hardware included
  • Bolt-in Brake Pedal Kit for 91063540
    Bolt-in Brake Pedal Kit for 91063540
    x
                Bolt-in brake pedal kit for '35-'40 Ford bolt-in crossmember 91063540.
            
  • TCI 600-6570-56 Under-Floor Power Brake / Hydraulic Clutch Assembly
    TCI 600-6570-56 Under-Floor Power Brake / Hydraulic Clutch Assembly
    x
                

    Want to put a manual transmission in your street rod?  These universal pedal assemblies offer a clean, simple way to mount your brake master cylinder and hydraulic clutch master cylinder to the frame, under the floor.  Kits include a bracket and pedals, plus new brake and clutch master cylinders.  Power brake kit has a 7” brake booster and matching master cylinder.

    • Overall length from front of pedal arm to back of master cylinder is 25-1/2"
    • Overall width from frame rail to right side of booster is 11-1/8"
    • Height from top of pedal assembly to bottom of booster is 6-3/4"
    • Top of pedal assembly to center of pedal pad mounting hole is 8-1/2"

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

     

  • 1932 Lo-Boy Brake Pedal Firewall Mount Bracket
    1932 Lo-Boy Brake Pedal Firewall Mount Bracket
    x
                

    Use this bracket when you want to install a firewall mounted master cylinder pedal. Kit requires the use of a pedal assembly and related hardware salvaged from a 1974-78 Mustang II, 1974-80 Pinto, or a 1974-80 Bobcat.

    Bracket mounts both the pedal and master cylinder.

  • 1941-48 Ford Frame X-Member Mount Power Brake Pedal Assembly
    1941-48 Ford Frame X-Member Mount Power Brake Pedal Assembly
    x
                Use this bracket and pedal to install our brake booster/master cylinder (not included, sold separately) to the left frame rail (boxed or open channel) of your early Ford frame or one without its original "X" member. Bracket bolts to frame (slight  trimming may be required). Sturdy, steel pedal arm can easily be heated and bent to clear any obstacles your car may have. Round pedal pad (included) screws onto pedal to finish the installation.

    Kit includes zinc plated bracket, pedal, pedal pad and hardware.

    Will NOT work in conjunction with the factory clutch pedal. Intended for use with an Automatic Transmission.

  • Lokar XBCA-9505 Midnight Series 180 Direct Fit Brake Pedal Arm, XL Pad
    New
    Lokar XBCA-9505 Midnight Series 180 Direct Fit Brake Pedal Arm, XL Pad
    x
                Direct Fit assemblies are designed to replace original brake and clutch pedal arms.
    Features:
    • Direct replacement of the original brake & clutch pedal arms
    • Billet aluminum construction
    • Windowed arms complement other Lokar products
    • Bronze pivot bushing for increased durability
    • Unique styling
    • Brushed or black finish
    Available for:
    • Kugel Komponents 90 & 180 degree pedal assemblies
    • Tri-Five Chevy
    • Camaro
    • Chevelle
    • Nova/Chevy II
    • C-10 Truck
  • TCI 600-6571-56 Under-Floor Manual Brake / Hydraulic Clutch Assembly
    TCI 600-6571-56 Under-Floor Manual Brake / Hydraulic Clutch Assembly
    x
                

    Want to put a manual transmission in your street rod?  These universal pedal assemblies offer a clean, simple way to mount your brake master cylinder and hydraulic clutch master cylinder to the frame, under the floor.  Kits include a bracket and pedals, plus new brake and clutch master cylinders.  Maximum brake pedal throw is 6", clutch pedal is 5.6". These pedal arms are threaded 1/2"-20 and accept pedal pads such as 702-4852.

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Universal T-Bucket Brake Pedal Kit
    Universal T-Bucket Brake Pedal Kit
    x
                

    Universal brake pedal mount and pedal arm assembly. This kit is designed to work with a Speedway Motors T-body with floor. Modifications may be needed to fit your assembly.

    Works well with our Dual Feed Master Cylinder 910-31420 and 3/8" Clevis 916-31949 (sold separately).

Goto Previous PagePrevious Page
1 2