Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®



Page 1 of 1


Brake Fluids

Brake Fluids

When it comes to your brakes, having the right fluid should not be compromised. Speedway Motors carries only the highest quality brake fluids with trusted name brands in Wilwood, Afco, and Ultra Lite Brakes. Our large selection of brake fluids allows you to choose the perfect type for your ride, from high performance fluid to racing brake fluid to silicone brake fluid, and in your desired quantity for an always on hand supply. Speedway Motors, the only source you need to know for brake fluids!


"Street Rod, Brake Fluids" Page 1 of 1

Page 1 of 1



Garage Sale

  • Wilwood 290-0632 570 Brake Fluid, 12 oz Bottle
    Wilwood 290-0632 570 Brake Fluid, 12 oz Bottle
    (Part #8352900632)

    Wilwood's specially formulated Hi-Temp 570° Racing Brake Fluid has a minimum 570 degree dry boiling point to withstand the severe heat requirements of automotive racing. Hi-Temp 570's low viscosity allows easy bleeding of your brake system, eliminating aeration of the brake fluid caused by foaming due to excessive pumping of the pedal. 

    This high temp brake fluid comes in a convenient 12 ounce container hermetically sealed to guarantee against unwanted absorption of moisture which can drastically lower the fluids boiling point (fluid from larger containers tends to become contaminated with moisture, lowering its boiling point and making it unsuitable for racing applications). 

    • Dry Boiling Point:  573° F
    • Wet Boiling Point:  313° F

    8352900632 Instructions (PDF)

  • Wilwood 290-6209 EXP 600 Plus Racing Brake Fluid, 500 ML Bottle
    Wilwood 290-6209 EXP 600 Plus Racing Brake Fluid, 500 ML Bottle
    (Part #8352906209)

    EXP 600 Plus is a highly refined blend developed for extreme performance under the high heat and extreme pressure of professional motorsports. EXP 600 Plus has been tested to 626° F with a wet boiling point of 417° F. These numbers far exceed any DOT or SAE specifications. 

    It is true that racing brake fluids need to have high boiling points. It is also true that fluids need to have low moisture affinity to slow the natural absorption rate of water vapor. But the true test of any high temp brake fluid is how well it resists aeration and compressibility after it has been heated and pressure cycled a few hundred times. The real test is at the track. EXP has been proven to maintain firm pedal feel and quick response, long after others have failed. 

    Note: For optimum performance, EXP 600 Plus should not be diluted with any other brake fluids. Add new fluid to a clean system. 

    8352906209 Instructions (PDF)