Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 6

Products

Brackets, Flanges and Hangers

Shop Streed Rod Headers & Exhaust At Speedway Motors

Speedway Motors has the street rod headers and mufflers you need, at a price you can afford! Check out our huge inventory of chassis headers, fenderwell headers, long tube headers, clipster headers, lake-style headers and tight-fit block hugger headers, all available with durable ceramic AHC coating. Find those exotic fender-well headers and electric exhaust cut-outs, too! Don't forget about our exclusive Tru-Ram exhaust manifolds, or our selection of header kits and header wrap. With an awesome selection of performance mufflers, header flangers, exhaust wrap, glasspacks, and exhaust tips, Speedway Motors is your hot rod exhaust superstore!

Featured Products
  • Lake Pipe Mounting Bracket, Chrome
    Lake Pipe Mounting Bracket, Chrome
    (Part #91013399)
    x
                

    These mount clamps fit our 1950's style lake pipes with a 2" O.D.

    Sold each (two brackets needed per pipe). 

  • Steel Exhaust Collector Ring, 2-1/2 Inch
    Steel Exhaust Collector Ring, 2-1/2 Inch
    (Part #91013369)
    x
                Mild steel flanges can be welded to exhaust pipes, mufflers or header collectors so your exhaust system can easily be unbolted and removed. Flanges are 1/4" thick and feature the common 3-bolt mount pattern.
            
  • Steel Exhaust Hanger Brackets, 7 Inch
    Steel Exhaust Hanger Brackets, 7 Inch
    (Part #91001311)
    x
                

    Universal steel exhaust hangers make fabricating your own exhaust system a little easier. Sold in pairs.

    Use with poly grommets listed to help isolate exhaust vibrations.

  • Poly Exhaust Hanger Grommets
    Poly Exhaust Hanger Grommets
    (Part #91000118)
    x
                

    These snap-together polyurethane exhaust hanger grommets are easy to use and help isolate exhaust vibrations. They a 3/8" mounting hole and work in conjunction with the steel straps listed (available in two lengths).

    Sold in pairs.

  • Steel Exhaust Collector Ring, 3 Inch
    Steel Exhaust Collector Ring, 3 Inch
    (Part #91013370)
    x
                Mild steel flanges can be welded to exhaust pipes, mufflers or header collectors so your exhaust system can easily be unbolted and removed. Flanges are 1/4" thick and feature the common 3-bolt mount pattern.
            
  • Steel Exhaust Hanger Brackets, 4 Inch
    Steel Exhaust Hanger Brackets, 4 Inch
    (Part #91001301)
    x
                

    Universal steel exhaust hangers make fabricating your own exhaust system a little easier. Sold in pairs.

    Use with poly grommets listed to help isolate exhaust vibrations.

  • Lake Pipe Mounting Bracket, Stainless Steel
    Lake Pipe Mounting Bracket, Stainless Steel
    (Part #91013400)
    x
                

    These mount clamps fit our 1950's style lake pipes with a 2" O.D.

    Sold each (two brackets needed per pipe). 

  • Steel Exhaust Collector Ring, 3-1/2 Inch
    Steel Exhaust Collector Ring, 3-1/2 Inch
    (Part #91013371)
    x
                Mild steel flanges can be welded to exhaust pipes, mufflers or header collectors so your exhaust system can easily be unbolted and removed. Flanges are 1/4" thick and feature the common 3-bolt mount pattern.
            

Filter

"Street Rod, Brackets, Flanges and Hangers" Page 1 of 6

Page 1 of 6

  • GM 5.3/6.0 Truck Exhaust Flanges, Mild Steel, 2.25 Inch
    GM 5.3/6.0 Truck Exhaust Flanges, Mild Steel, 2.25 Inch
    (Part #9160002)
    x
                

    You just bought your LS and plan on using the factory exhaust manifolds, but noticed they have odd shaped collector flanges. Now what? These flanges bolt to the factory factory manifold and allow for a smooth installation. Flanges are 3/8" thick.

    Specify driver or passenger side.

  • LS1 Chevy Header Flange Plates, Round Port, 1-5/8 Inch
    LS1 Chevy Header Flange Plates, Round Port, 1-5/8 Inch
    (Part #41811017)
    x
                

    LS1 Chevy exhaust manifold flange plates for headers have round ports and are CNC cut from 5/16" thick mild steel.

     

  • Dynatech® Stainless Steel LS Header Flange, 1.940 Inch Port, 3/8 Thick
    Dynatech® Stainless Steel LS Header Flange, 1.940 Inch Port, 3/8 Thick
    (Part #31179616061)
    x
                A great exhaust system starts at the begining - the exhaust manifold flange. One of Dynatech®s  biggest advantages is the wide selection of port machined flanges. All the header flanges are CNC laser machined for unparalleled quality and fit. 
    • For GM LS1 V-8 engines
    • Flanges are sold individually
    • Use with Stainless Gaskets
  • Dynatech® Small Block Chevy 23 Deg. Header Flange, 3/8 Thick, 1.63 Port
    Dynatech® Small Block Chevy 23 Deg. Header Flange, 3/8 Thick, 1.63 Port
    (Part #31179600622)
    x
                

    A great exhaust system starts at the begining - the exhaust manifold flange. One of Dynatech®s biggest advantages is the wide selection of port machined flanges.  All the header flanges are CNC laser machined for unparalleled quality and fit.

    • Flanges are sold individually
    • Use with Fiber Gaskets (part number 31179400001)
     

     

  • Big Block Chevy Header Flange Plates
    Big Block Chevy Header Flange Plates
    (Part #41811016)
    x
                

    Build or modify your own headers with these exhaust manifold flange plates. Header flange only. Does not include adaptor pipe or gaskets.

    • Approximately 3/8” thick
    • 2" Round port design

     

  • Dynatech® 796-18061 Stainless Ford 4.6L 2V Header Flange
    Dynatech® 796-18061 Stainless Ford 4.6L 2V Header Flange
    (Part #31179618061)
    x
                

    A great exhaust system starts at the begining - the exhaust manifold flange. One of Dynatech®s biggest advantages is the wide selection of port machined flanges.  All the header  flanges are CNC laser machined for unparalleled quality and fit.

    • For Ford 4.6L 2V Modular V-8 engines
    • Flanges are sold individually
    • Use with Stainless Gaskets (at right)
  • GM LT1 Exhaust Flanges, Mild Steel
    GM LT1 Exhaust Flanges, Mild Steel
    (Part #9160008)
    x
                

    You just bought your LT1 and plan on using the factory exhaust manifolds, but noticed they have odd shaped collector flanges. Now what? These flanges bolt to the factory factory manifold and allow for a smooth installation. Flanges ared 3/8" thick.

    Specify driver or passenger side.

  • Big Block Ford 429/460 Header Flanges
    Big Block Ford 429/460 Header Flanges
    (Part #41811143)
    x
                Build or modify your own headers with these exhaust manifold flange plates. Header flange only. Does not include adaptor pipe or gaskets.
            
  • Big Block Mopar Header Flange
    Big Block Mopar Header Flange
    (Part #41811130)
    x
                

    Build or modify your own headers with these exhaust manifold flange plates. Header flange only. Does not include adaptor pipe or gaskets. Port size is 1-5/8" x 1-3/8".  5/16" Thick.

    This flange set is for Chrysler engines such as 361-383-400 & 440.

  • Small Block Chevy Round Port 1-5/8 Inch Header Flanges
    Small Block Chevy Round Port 1-5/8 Inch Header Flanges
    (Part #41811010)
    x
                

    Build or modify your own headers with these flange plates. These exhaust manifold flanges have round ports. This is a pair of header flanges only, no bolts and no gaskets included,  Flange is 5/16" thick.

    Header Flange Plate Chart Application

     

  • Dynatech® Small Block Chevy 23 Deg. Header Flange, 1/4 Thick, 1.63 Port
    Dynatech® Small Block Chevy 23 Deg. Header Flange, 1/4 Thick, 1.63 Port
    (Part #31179600022)
    x
                

    A great exhaust system starts at the begining - the exhaust manifold flange. One of Dynatech®s biggest advantages is the wide selection of port machined flanges.  All the header flanges are CNC laser machined for unparalleled quality and fit.

    • Flanges are sold individually
    • Use with Fiber Gaskets (part number 31179400001)
     

     

  • Dynatech® Big Block Chevy Exhaust Header Flange, 2.125 Port, 5/16 Thick
    Dynatech® Big Block Chevy Exhaust Header Flange, 2.125 Port, 5/16 Thick
    (Part #31179631536)
    x
                

    A great exhaust system starts at the beginning - the flange and gaskets.  One of Dynatech®'s biggest advantages is the wide selection of port matched flanges.  All of Dynatech's flanges are CNC laser machined for unparalleled quality and fit.

    • CNC laser machined
    • For BBC
    • 2.125" port / 2.224" X,Y / 5/16" thick
    • Sold each
  • Small Block Mopar 273-360 Header Flanges
    Small Block Mopar 273-360 Header Flanges
    (Part #41811127)
    x
                Build or modify your own headers with these exhaust manifold flange plates. Header flange only. Does not include adaptor pipe or gaskets. 5/16 thick.
            
  • Dynatech® 796-16071 Stainless 4.6L Cobra 4V Header Flange
    Dynatech® 796-16071 Stainless 4.6L Cobra 4V Header Flange
    (Part #31179616071)
    x
                

    A great exhaust system starts at the begining - the exhaust manifold flange. One of Dynatech®s biggest advantages is the wide selection of port machined flanges. All the header flanges are CNC laser machined for unparalleled quality and fit.

    • For 2007 Ford Mustang 4 Valve Cobra 4.6L engines
    • Flanges are sold individually
    • Use with Stainless Gaskets
  • Dynatech® Stainless Steel LS Header Flange, 1.820 Inch Port, 3/8 Thick
    Dynatech® Stainless Steel LS Header Flange, 1.820 Inch Port, 3/8 Thick
    (Part #31179613000)
    x
                A great exhaust system starts at the begining - the exhaust manifold flange. One of Dynatech®s  biggest advantages is the wide selection of port machined flanges. All the header flanges are CNC laser machined for unparalleled quality and fit. 
    • For GM LS1 V-8 engines
    • Flanges are sold individually
    • Use with Stainless Gaskets
  • GM 604 Fast Burn Vortec Bow-Tie Square Port Header Flanges
    GM 604 Fast Burn Vortec Bow-Tie Square Port Header Flanges
    (Part #41811019)
    x
                Build or modify your own headers with these flange  plates. These exhaust manifold flanges have square ports. This is a pair  of header flanges only, no bolts and no gaskets included.
    • 1-5/8" Tube Size
    • Flange is 1/4" thick
    • Flanges ONLY

    Header Flange Plate Chart Application

  • Steel Exhaust Collector Ring, 2-1/2 Inch
    Steel Exhaust Collector Ring, 2-1/2 Inch
    (Part #91013369)
    x
                Mild steel flanges can be welded to exhaust pipes, mufflers or header collectors so your exhaust system can easily be unbolted and removed. Flanges are 1/4" thick and feature the common 3-bolt mount pattern.
            
  • GM 5.3/6.0 Truck Exhaust Flanges, Mild Steel, 2.5 Inch
    GM 5.3/6.0 Truck Exhaust Flanges, Mild Steel, 2.5 Inch
    (Part #9160004)
    x
                

    You just bought your LS and plan on using the factory exhaust manifolds, but noticed they have odd shaped collector flanges. Now what? These flanges bolt to the factory factory manifold and allow for a smooth installation. Flanges are 3/8" thick.

    Specify driver or passenger side.

  • Flathead Header Exhaust Flange
    Flathead Header Exhaust Flange
    (Part #91013605-2)
    x
                

    Works well as a collector pipe flange for Fenton cast iron headers. 

    • 5/16" thick steel
    • 2.00" inside diameter
    • 3-1/8" bolt hole center-to-center
    • 4" overall length
    • 3-1/8" width
  • Four Bolt Collector Flange for Flathead Header
    Four Bolt Collector Flange for Flathead Header
    (Part #4477266)
    x
                

    Collector flange to weld to your collector pipe hook-up. Works with Flathead Center Dump Headers 910-13601. 

    • Hole ID: 2.5"
    • Center to Center: 2.75" and 2.5"
    • Plate Dimensions: 3.5" x 3.25" x .25"
Goto Previous PagePrevious Page
1 2 3 4 5 6