Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Street Rod Body, Interior & Gauges At Speedway Motors

Speedway Motors is the street rodder's source for body parts, gauges, and interior accessories! Find all the essential fiberglass body components, gauge sets by Stewart Warner and Auto Meter, and hot rod bomber seats, in our online catalog. While you are there, check out our full line of script emblems, rear view mirrors, windshields, fiberglass hoods and grilles. Complete your hot rod with sound proof insulation from Dynalite and Hushmat. Don't forget about Speedway's hot rod bomber seats for your traditional street rod, too!

Featured Products
Speedway Economy 12 Circuit Wiring Harness
Speedway Economy 12 Circuit Wiring Harness
x
            

This harness was designed to offer you all the highest quality components in a package designed for cars with minimum accessories. Each wire is color coded and labeled every few inches.

Our prewired 12 circuit kit will fit all your basic needs and makes wiring a painless process. It is designed especially for the street rod without accessories. It also includes horn relay and connector, turn and hazard signals, dimmer switch connector, circuit breaker for headlights, two flashers, one alternator plug, two ignition switch connectors, plus more.

  • Mainfuse box base is 1-7/8" x 3-11/16"
  • Box height is 3-3/4"
12 Circuit Wiring Harness Installation Instructions (PDF)
Model A Frame Assembly
$2,299.99
Product Rating: 5.00 Stars
Model A Frame Assembly
x
            

Speedway Motors makes it easy for you to get your car rolling with our Model A frame assembly. This frame is engineered to accept our radius rod front axle and 4-bar rear suspension kits.

  • Fabricated frame rails
  • 1932 Ford front crossmember
  • Front shock mounts
  • Vega steering box mount
  • Front radius rod mounts
  • Hood hold down brackets
  • Manual brake pedal
  • Master cylinder mount
  • S/B Chevy motor mounts
  • TH350 transmission mount
  • Rear 4-bar mounts
  • Rear coil-over mounts
  • Rear panhard bar mount
  • Welded-in mounting nuts

 

Truck Freight Shipping Charges Apply - click here for details

Dynamat 10455 Xtreme Bulk Pack, Cut-to-Fit Thermal and Sound Insulation
Dynamat 10455 Xtreme Bulk Pack, Cut-to-Fit Thermal and Sound Insulation
x
            

Reduce road noise and vibration while making your stereo sound twice as good fast with Dynamat. By first laying down a layer of Dynamat Xtreme, you will make your car quiet and cooler. Add another layer of Dynaliner and you will make it even cooler. Or a layer of Dynapad and make it quieter. A Dyna-Roller will make installation easy. 

Kit contains nine 18" x 32" pieces (36 square feet) of Dynamat Xtreme (.067" thick) for rear decks, doors, floors and trunk floors. Unlike Dynamat Original, Dynamat Xtreme is also recommended for trunk lids, roofs, quarter panels, under-hood installations and multi-purpose use.

Simply measure your application to order the necessary amount. This product dramatically cuts heat and noise from inside the vehicle for more enjoyable cruising and every day driving.

  • Use to get more bass, more music, lower road noise and better sound
  • Kit contains (9) nine 18" x 32" pieces (36 square feet)
  • Simply measure and cut to fit your application

Dynamat Information Sheet (PDF)

Dynamat Tech Spec Sheet (PDF)

Speedway Universal 20 Circuit Wiring Harness
Speedway Universal 20 Circuit Wiring Harness
x
            Whether you're building an option loaded car or just want to have extra circuits available for future updates, this harness is perfect and makes any job painless. Compact 5-1/2"L x 4-1/2"W x 3-1/4"H  fuse block holds 18 standard push-in fuses and can be mounted almost anywhere. 

Each high temperature wire is color coded and labeled every six inches. Also includes GM type steering column connectors. To keep costs down and the quality high, this harness does not include any switches, light sockets or plugs that you would normally already have.

  • Harness has 20 circuits, of which 18 are fused
  • Taillight leads measure 17' long
  • Includes plug for GM column, headlight switch, dimmer switch, and signal flashers

Wiring Harness Installation Instructions (PDF)

"Street Rod, Body" Page 1 of 25

  • Sill Weather Whisker Strip
    $29.99
    Sill Weather Whisker Strip
    x
                After putting in new glass and window felt run channels, you don't want to reuse your old whisker that's on your garnish moldings, so here's a way to prevent scratching up that new glass. We now offer a 48" long, 9/16" tall whisker strip. Only offered in black.
            
  • 1928-31 Model A Front Crossmember
    1928-31 Model A Front Crossmember
    x
                

    These replacement 1928-31 Model 'A' Ford front crossmembers lower a Model A chassis 2" below a stock crossmember. Replaces a cracked original or use it to start your reproduction frame off right. Made of heavy, 7-gauge steel with clearance for 1-3/4" cross spring. Welds to frame boxing plates of original or repro chassis.

  • Universal Expanding Body Mounts
    Universal Expanding Body Mounts
    x
                

    If you are building a lightweight car like a "T" or an "A", mounting the body may present a problem. These neat expanding rubber universal body mounts allow you to drill a 3/4" hole in the top of the frame, insert a 3/8" coarse bolt, tighten, then the body is mounted.

    Not recommended for cars newer than 1934.

  • Percy's Speedglass Window Material, 1/8 Inch Thick
    Percy's Speedglass Window Material, 1/8 Inch Thick
    x
                

    This amazing material from Percy's is just the ticket for windshields, side and rear windows. Not to be confused with the more economical plexi-glass, this material allows anyone to cut to fit with common hand tools, but its special coating is scratch and chemical resistant.

    This surface hardened plastic is similar to Lexan, but can be cleaned like normal glass without scratching. You can even use windshield wipers on it and clean it with standard glass cleaners.

    • 50% - 75% lighter than glass (depending on thickness)
    • 1/2 the weight per equal thickness of glass
    • Extremely shatterproof
    • Excellent optical clarity
    • Coated on both sides with a very scratch resistant coating
    • Highly scratch and chemical resistant
    • High resistance to pitting or sand blast effect
    • Can be cleaned with standard glass cleaner, no extra polishes or cleaners needed
    • Excellent water shedding capabilities

    Technical Info (PDF)

    SpeedGlass Instructions (PDF)

  • Rubber GM Transmission Cushion
    Rubber GM Transmission Cushion
    x
                

    OEM-style rubber transmission cushion for many '58-'82 GM transmissions including TH350 auto, Muncie, Saginaw, and others.

    • Meets or exceeds OEM specifications 
    • Rubber formulation provides abrasion resistance and aging stability
    • Tough, hardened steel plate & inserts
    • Chemlock® bonding agent ensures superior rubber-to-metal bond
  • 1932 Ford Interior Door Escutcheon
    1932 Ford Interior Door Escutcheon
    x
                These are used on both the door handles and window crank handles.
    • Polished stainless steel
    • Inside handle escutcheons for 1932 passenger cars
    • Sold Each
  • Universal Aluminum Hinge
    $11.99
    Product Rating: 5.00 Stars
    Universal Aluminum Hinge
    x
                

    This universal aluminum piano hinge has a variety of uses on anything from race cars to T-buckets. Cut to fit.

    1-1/2" wide with 3/4" of flat each side of pin. Includes two 36" length hinges.

  • No Club Lone Wolf Car Club Plaque
    No Club Lone Wolf Car Club Plaque
    x
                Complete the nostalgic look to your rod with this "Lone Wolf" plaque. Constructed of cast aluminum alloy that will not rust. Recessed background is finished in gloss black. No holes for mounting or hanging
            
  • 1932 Ford Stainless Steel Grille/Hood Trim
    1932 Ford Stainless Steel Grille/Hood Trim
    x
                

    This 1932 Ford stainless grille trim is made of polished stainless steel. It is the trim molding piece that goes between the grille and hood. This is the grille trim for a stock 32 ford grille shell. No other dimensions are available.

    • 1932 Ford
    • Polished stainless steel
    • Fits between grille and hood

     

  • Speedway 5 Gauge Set
    $159.99
    Speedway 5 Gauge Set
    x
                
    • Stainless steel bezel
    • Backlit white face
    • Includes:
      • 3-3/8” Mechanical Speedometer       
      • 2-1/16” gauges
    • Mechanical oil pressure gauge and line kit
    • Voltmeter
    • Mechanical water temp gauge
    • Fuel gauge and sender
    • Replacement light socket assembly available #s 910-65075 & 910-65071
  • Lexan Wind Wings
    From: $29.99
    Product Rating: 4.50 Stars
    Lexan Wind Wings
    x
                  16" x 6". Choose from two colors of wind wing, smoke or clear. Wing wings sold in pairs.       
            
  • 1932 Ford Cowl Vent Handle
    $24.99
    1932 Ford Cowl Vent Handle
    x
                

    This chrome cowl vent handle is for a 1932 Ford and is made of solid brass. Plated with chrome. These handles open and close the vent atop the firewall to let air in.

    • Fits 1932 Ford
    • Made of solid brass
    • Plated with chrome
    • With mounting nut and washer

     

  • Base Door Panel Kit
    $149.99
    Base Door Panel Kit
    x
                Design your own custom door panel with Hagan panel components. This kit comes with 4 black panel boards that are 39" x 32" which include 50 inline panel clips and a How-To video. Base boards are made of dense 1/8" water-resistant cardboard.
            
  • 1932 Ford V8 Headlight Bar Emblem, Chrome
    1932 Ford V8 Headlight Bar Emblem, Chrome
    x
                

    These reproduction V-8 headlight bar emblems come with a retaining screw to easily mount.  They feature a beautiful chrome finish and are the perfect finishing touch for your 1932 Ford.

    • Chrome finish
    • 1932 Ford headlight bar emblem
    • Mounts with included retaining screw
  • Door Props
    $49.99
    Product Rating: 3.00 Stars
    Door Props
    x
                

    This door prop kit fits between your striker bolt and bear jaw latch to hold the door open at car shows or for maintenance and cleaning.

    17" long (where they snap onto the door latch pins).

  • Extension For Peep Mirror
    $19.99
    Product Rating: 3.75 Stars
    Extension For Peep Mirror
    x
                

    You want peep mirrors, but they are too short? With this 1-1/2" longer extension, that problem has gone away. Chrome plated to match the peep mirror and machined to fit at both ends. 

    Mirror not included.

  • Past Tech 1932 Ford DuVall   Windshield Frame
    Past Tech 1932 Ford DuVall Windshield Frame
    x
                

    The famous DuVall windshield is most unique windshield frame on the market today. The DuVall name is trademarked by Speedway Motors, so you know you are getting the real thing! Frame is constructed of solid, cast brass which can be polished, painted, or plated. A classic finishing touch to any 1932 Ford street rod.

    Includes 5 ft. of black piping which mounts between the body and the winshield frame. Glass not included.

    555-32600 Instructions (PDF)

  • 1932 Ford Roadster Inside Door Handle Assembly
    1932 Ford Roadster Inside Door Handle Assembly
    x
                

    These inside door handle kits are designed for 1932 Ford Roadsters. They feature a beautifully chromed finish and are a complete set for 2 doors.

    • 1932 Ford Roadsters
    • Chromed finish
    • Complete set for 2 doors
  • Linear Actuator Aluminum Mounting Bracket, 1-1/2 x 1-1/2 Inch
    Linear Actuator Aluminum Mounting Bracket, 1-1/2 x 1-1/2 Inch
    x
                

    These billet aluminum mounting brackets are for our Linear Actuator 910-64290. They are designed to mount your linear actuators to hoods, trunks, etc. on either flat or angled surfaces. Solid aluminum construction provides the greatest strength possible while remaining a great looking piece. The brackets are a satin finish, but can be polished to a bright shine.  Sold individually - you may need two mounts (one for each end of the actuator).  Includes bracket and three securing screws.

    • Billet aluminum
    • Satin finish
    • Mount linear actuators to hoods, trunks, etc.
    • Mount to either flat or angled surfaces
    • Sold individually - may need one mount for each end
    • Works with Linear Actuator 910-64290
    • Includes bracket and three securing screws

    NOTE: The vendor no longer includes the mounting plate as pictured in previous catalogs.

  • Tubular Transmission Mount with 2 Inch Drop
    Tubular Transmission Mount with 2 Inch Drop
    x
                

    Universal rear transmission mounts and heavy duty tube crossmember. Fit most GM, Ford, and Mopar manual and auto transmissions. Black powder coated finish. Crossmember must be welded directly into frame or to 3 hole mounting flanges for bolt-in application. Fits frames up to 38" wide.

     

    Note: May require re-drilling of the mount holes when used with Ford C4/C6 trans cushion 910-18017.

  • DEi 050501 Floor and Tunnel Shield II, Heat and Sound Insulation, 2 Ft. x 21 Inch
    DEi 050501 Floor and Tunnel Shield II, Heat and Sound Insulation, 2 Ft. x 21 Inch
    x
                

    Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Floor & Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue.  Floor & Tunnel Shield II provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well.

    Constructed with an embossed 10 mil aluminum face bonded to 1/8” composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor & Tunnel Shield II withstands up to 1750°F of direct continuous heat. The adhesive side holds past 450°F. Its improved multifaceted modern aluminum surface offers improved reflectivity and rigidity and allows for ease of installation. At only 3/16” thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas.

    With a unique and patented finely woven glass-fiber backing, Floor & Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound.

    Floor & Tunnel Shield II can be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, and more. Multiple uses include: fire walls, under hoods, transmission tunnels, fl

  • 1932 Ford Grille Insert, Rodders Style
    1932 Ford Grille Insert, Rodders Style
    x
                

    This 1932 Ford grille insert is made from beautifully polished stainless steel. "Rodder style" inserts do not have a crank hole.  This measures approx. 27-3/8" tall and 17" wide.  The grille is retained in the shell with screws going horizontal into the shell through the shell flange.

    • Polished stainless steel
    • Rodder style
    • Does not feature crank hole
    • 27-3/8" tall
    • 17" wide
  • Auto Meter 3357 Transmission Temperature Gauge
    Auto Meter 3357 Transmission Temperature Gauge
    x
                

    Sport Comp temperature gauge features air-core meter movement with a 2-1/16" O.D. Temperature meter includes 1/8" NPT sender with 3/8" NPT and 1/2" NPT adapter fittings.

    If mounting temperature sender in a steel pan, use bung 617-6701. Aluminum pans use bung 617-6801.

  • Steel Hood Pin Kit with Q-Clips
    Steel Hood Pin Kit with Q-Clips
    x
                Hood pin kit contains two 1/2" chrome plated steel studs, two steel scuff plates, four nuts, and two flip-over Q-clip pins.
            
  • Threaded Windshield Stud, 1928-36 Ford, 3/8 Inch X 3/8 Inch NF X 2 Inch
    Threaded Windshield Stud, 1928-36 Ford, 3/8 Inch X 3/8 Inch NF X 2 Inch
    x
                

    These threaded windshield studs feature a stop and include one stud and one cone nut. They are zinc plated for longevity. Fits 1928-31 Model A and 1932-36 Ford.

    • Steel material
    • (1) stud, (1) cone nut
    • Sold each

    Not included in our windshield kits.

  • License Plate Bracket, 2 Inch Tube Clamp
    License Plate Bracket, 2 Inch Tube Clamp
    x
                License plate mounting brackets attach to tube axles, spreader  bars, etc. with a 2" O.D. This license tag bracket is available in plain or polished aluminum finishes.
            
  • Macs Antique Parts A41563S 30-31 Ford Model A Plain Square Step Plate
    Macs Antique Parts A41563S 30-31 Ford Model A Plain Square Step Plate
    x
                

    Cast aluminum step plate for 1930-31 Ford Model A. Square plate includes a built-in 5/16" stud to mount the plate (with nut and washer). Square plate has a smooth plain cast zinc finish.

  • Adjustable Seat Riser
    $39.99
    Adjustable Seat Riser
    x
                
    • Cadmium plated steel
    • Sold in a set of 2 pairs
    • Three mounting hole options to adjust height
  • Stewart Warner 82310 Deluxe Ammeter Gauge, 2-1/16 Inch, 30-0-30 Amps
    Stewart Warner 82310 Deluxe Ammeter Gauge, 2-1/16 Inch, 30-0-30 Amps
    x
                Stewart Warner Deluxe 2-1⁄16" diameter ammeter gauges feature a black face, white letters and chrome bezel. A 12 volt light is included.
            
  • 1942-48 Ford Dash Trim, Passenger Car, 3-Piece Chrome
    1942-48 Ford Dash Trim, Passenger Car, 3-Piece Chrome
    x
                

    These reproduction dash trim panels are an exact shape as the original and come in a 3-piece set. They feature a beautiful chrome plated finish.

    • 1942-48 Ford passenger cars
    • Exact shape as original
    • Chrome finish
    • 3-piece set
    • 44-1/8" wide and 8-1/8" tall in the center
  • 1928-1929 Steel Side Splash Aprons without Hump
    1928-1929 Steel Side Splash Aprons without Hump
    x
                

    These 1928-1929 Model A steel side splash aprons are exact and now available without the hump at the rear. Approximate length, 68".

  • Spare Tire Mount Mirror
    $44.99
    Product Rating: 4.00 Stars
    Spare Tire Mount Mirror
    x
                

    Mounts on the side spare tire. 4" diameter, beveled edge mirror, adjustable 1" wide leather strap.  Strap mounting length is 16.5" at shortest point and 20.5" at longest. 

    Only available in brown.

  • Hollow Half Round Rubber Cowl Lacing, 5/8 Inch Wide, 8 Ft.
    Hollow Half Round Rubber Cowl Lacing, 5/8 Inch Wide, 8 Ft.
    x
                

    Soft half round hollow rubber cowl lace smooth surface flat on one side.  Offered in a 8 foot roll.

    Hood Lacing Instructions (PDF) 

  • Auto Meter 2268 LS Series Oil Pressure Sender Adapter
    Auto Meter 2268 LS Series Oil Pressure Sender Adapter
    x
                

    This LS Series oil pressure sender fitting allows your aftermarket 1/8" NPT oil pressure sending unit to be installed in place of the OEM oil pressure sender.

    When installing aftermarket gauges, the OEM oil pressure sender is not required by the PCM and may be replaced by the aftermarket sender of your choice.

  • 1933-1940 Ford Oval Head Bumper Bolts
    1933-1940 Ford Oval Head Bumper Bolts
    x
                

    These replacement oval head bumper bolts feature a stainless steel cover. They fit 1933-40 Fords and many others.

    • Replacement oval head bumper bolt
    • Stainless steel cover
    • Fits 1933-40 Fords and many others
    • Includes nut and lockwasher

     

  • Glass Run Channel
    $24.99
    Product Rating: 5.00 Stars
    Glass Run Channel
    x
                This is a highly flexible U-shaped channel comes in an 8-foot-long x 5/8" wide coil with sides that are 9/16" tall. You will need one coil of window felt per door.
            
  • Hood Saver Protective Clear Hood and Body Tape, 12 Ft. Roll
    Hood Saver Protective Clear Hood and Body Tape, 12 Ft. Roll
    x
                

    Hood Saver is the world's finest transparent protective tape. This multi-purpose, waterproof super clear tape protects painted body parts and chrome from rock chips, tar and bugs. Hood Saver tape is easy to apply and remove. Provides an invisible protective film that is safe for all painted surfaces.

    Comes in a 12 ft long roll that is 5" wide.

  • 4 Inch Peep Mirror
    $14.99
    Product Rating: 4.10 Stars
    4 Inch Peep Mirror
    x
                Our 4" diameter peep mirror clamps to the top edge of the door. Fits over a door edge that is app. 1/8" thick or thinner. Fits right or left side (reversible). A popular and universal mirror at a low cost. Sold each.
            
  • Universal Vent Window Removal Set
    Universal Vent Window Removal Set
    x
                

    Replace worn out, rusted, or missing window channels and convert to one piece windows.

    • Channels are adjustable
    • Welding required
    • Channels are 18" long, 9/16" wide, 3/8" tall
    910-01931 Instructions (PDF)
  • Ididit 2503000040 Universal Billet Aluminum Knob, 3/16 Inch Bore
    Ididit 2503000040 Universal Billet Aluminum Knob, 3/16 Inch Bore
    x
                

    Universal billet aluminum switch knobs work great as a headlight switch knob, dash knob, door knobs, lock knob, wiper knob, or a radio knob. These 3/16" versions are retained with a set screw.

Goto Previous PagePrevious Page
1 2 3 4 5 ... 25