Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 50

Products

Air and Fuel Delivery

Shop Streed Rod Air & Fuel Delivery At Speedway Motors

Speedway Motors stocks all the best names in street rod carburetors and intake manifolds! Plus, we have a great selection of fuel cells, as well as electric and mechanical fuel pumps. Don't forget to let your engine breath with filters from K&N and R2C. Whether you run alcohol or gas in your hot rod, Speedway can fuel your need for speed!

Featured Products
  • Open 4 Barrel Carburetor Base Gasket
    Open 4 Barrel Carburetor Base Gasket
    (Part #55054)
    x
                Open base gaskets.
            
  • Sure Seal O-Ring Air Cleaner Spacer
    From: $4.99
    Product Rating: 4.91 Stars
    Sure Seal O-Ring Air Cleaner Spacer
    (Part #91011063)
    x
                

    This unique sealing ring spacer has O-ring on the carburetor side to prevent dust from entering past the filter base. Also allows you to raise the filter up for additional clearance.

    Available in three heights: 1/2", 1" or 2".

  • Aluminum Fuel Line, 3/8 Inch O.D.
    From: $10.99
    Product Rating: 4.75 Stars
    Aluminum Fuel Line, 3/8 Inch O.D.
    (Part #91011430)
    x
                Where else can you buy aluminum fuel line in the size and length you need? This easy-to-flare and bend tubing will save weight and money. 
    • Use with tube nut couplers, sleeves and 37° flared AN fittings
    • Rated to 250 psi
    • Not recommended for high pressure (brake) applications
    • Available in 10 ft., 20 ft., or 30 ft. coils

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

  • FST RPM300 Flo-Max Fuel Filter System with 1/2 Inch NPT Ports
    New
    FST RPM300 Flo-Max Fuel Filter System with 1/2 Inch NPT Ports
    (Part #910117300)
    x
                

    This fuel filter system from FST Performance was engineered to combine high efficiency fuel filtration in the smallest possible design. Its fuel flow capabilities and low fuel restriction make this the most innovative and efficient system built. This filter features a unique multiport design that provides a dual inlet and outlet port that allows installation flexibility.

    • The RPM300 is the filter system of choice with Jeep owners and has become very popular as an 'in-line' fuel filter for most pleasure boats
    • Ports: 4 multi-directional (2-IN & 2-Out) 1/2inch NPT (Pipe) thread
    • Fuel Flow: 300 GPH
    • Filtration efficiency:187sq inches of 4 micron, water separating media
    • Burst: 250psi
    • Height: 4.25
    • Width: 3
    • Depth: 3-3/4
    • Weight: 19 oz.
    • Base / manifold mounting holes: 7/16"
    • For high performance, street, racing, off-road, and marine applications
  • Fuel Filter Mounting Bracket
    Fuel Filter Mounting Bracket
    (Part #910117)
    x
                

    These fuel filter mounting brackets are CNC machined aluminum. Available in 1-3/8", 1-1/2", or 1-3/4" round tubing.

    These brackets are designed to be used with our filters. Hole is 2" inner diameter. 

  • Speedway Fuel Cell Foam, 14 x 4 x 6 Inch
    Speedway Fuel Cell Foam, 14 x 4 x 6 Inch
    (Part #6007050)
    x
                

    Compatible with gasoline, E85, or alky fuels (not recommended for use with nitro-methane). This fuel cell safety foam keeps weight transfer/shift to a minimum, which provides you with more responsive and predictable handling. Can be cut and stacked as needed.

    • 8-12 gallon cells typically use 3-8 sticks
    • 16 gallon cells typically use 4-10 sticks
    • 22-32 gallon cells typically use 8-14 sticks

    Blocks are sold EACH.

  • Afco 4# Fuel Pressure Sending Unit (1/8 Inch Pipe)
    Afco 4# Fuel Pressure Sending Unit (1/8 Inch Pipe)
    (Part #10685284)
    x
                

    Afco 4# Fuel Pressure Sending Unit

    • 1/8 Inch Pipe
  • Edelbrock Small Block Chevy Dual Quad Intake/Carburetor Kit, Endurashine AVS
    Edelbrock Small Block Chevy Dual Quad Intake/Carburetor Kit, Endurashine AVS
    (Part #92519926)
    x
                
    There is nothing sweeter looking or sounding than a dual quad on a Chevy!  This one kit gets you two manual choke Edelbrock carbs, an Edelbrock unpolished intake manifold, fuel line and special progressive linkage.  Just add a suggested air cleaner to finish your installation. Will clear HEI distributors.
    • 1955-86 262-400 small block
    • (2) 500 cfm manual choke carbs
    • C-26 Dual-Quad manifold
    • 1500-5000 rpm
    • Low profile for hood clearance on most vehicles

    Kit Includes:

    • Edelbrock Dual Quad Intake Manifold (3255425)
    • Edelbrock Endurashine Dual Quad 500 CFM 4-barrel Carburetors (32518044)
    • Dual Quad Fuel Line (91011578)
    • Dual Quad Carburetor Linkage (3257094)
    • Carburetor Stud Kit (13560)
    • Super Seal Intake Gasket Set (91010206)

Filter

"Street Rod, Air and Fuel Delivery" Page 1 of 50

Page 1 of 50

  • Lokar TCB-40TP3 Tuned-Port Billet Aluminum Bracket w/Triple Stud
    Lokar TCB-40TP3 Tuned-Port Billet Aluminum Bracket w/Triple Stud
    (Part #491TCB40TP3)
    x
                

    The billet aluminum bracket mounts to the side of the Tuned-Port plenum. The billet aluminum bracket is available with:

    • a single stud for throttle only
    • double stud for throttle and kickdown
    • triple stud for a throttle, kickdown and cruise control cable.
  • AFCO 10171 Bushing Kit w/ RH Threaded Female Rod End
    AFCO 10171 Bushing Kit w/ RH Threaded Female Rod End
    (Part #10610171)
    x
                AFCO Throttle Rod Components
            
  • Lokar TC-1000LS184 Hi-Tech GM LS1 Throttle Cable Kit, 84 Inch Long
    Lokar TC-1000LS184 Hi-Tech GM LS1 Throttle Cable Kit, 84 Inch Long
    (Part #491TC1000LS184)
    x
                
    • Specially Extruded Liner For Extended Cable Life
    • Aluminum Ferrules To Eliminate Fraying
    • U-Cut-To-Fit Outer Housing
    • Clevis Designed w/o Cotter Pins Or Set Screws
    • Adapts To Factory And Aftermarket Pedals
    • Made In The U.S.A.
    • Lifetime Warranty
  • Aeromotive 18664 Stealth Fuel Cell, 15 Gallon
    Aeromotive 18664 Stealth Fuel Cell, 15 Gallon
    (Part #91018664)
    x
                

    Finally, a truly universal system that is built for street rods, drag racing, off-road, autocross, drifting and any other performance application you can think of! This complete unit has all the advantages of an in-tank fuel system; quiet cool operation, ideal fuel pump environments and a serious reduction in installation time and investment. In addition, this system eliminates the risk of fuel pump cavitation due to hard cornering, launching or braking thanks to innovative baffling built into each tank.

    • Includes Stealth 340 LPH in-tank fuel pump
    • Works with both carbureted and EFI systems
    • Return line provisions
    • Two AN8 vents with rollover valves
    • Universal 0-90 Ohm fuel level sender
    • Standard 12-bolt flush mount lid assembly
    • Natural aluminum finish
    • Ready to go simple installation

    Fuel Pump Flow Chart (GIF)

  • Edelbrock 1413 Performer 4 Barrel Carburetor, 800 CFM, Electric Choke
    Edelbrock 1413 Performer 4 Barrel Carburetor, 800 CFM, Electric Choke
    (Part #3251413)
    x
                

    Edelbrock Performer Series four barrel carbs have proven themselves to be easy to tune with great drivability. Whether you need to replace an aging stock carb or are looking for a performance carb to top off your hot rod, the Edelbrock Performer Series carbs are the best choice for performance and value. All Edelbrock products are proudly made in the U.S.A.

    Designed and calibrated for maximum street performance with most Performer RPM, RPM Air-Gap and Torker II manifolds and with Performer manifolds on large cubic-inch engines. Includes an electric choke and detailed instructions. Ford/Mopar throttle adapter arms sold separately.

    • Electric choke 
    • Smooth throttle response throughout the power band
    • Uses metering rods to transition between circuits - rods can be changed in seconds without carburetor removal or draining fuel
    • Float levels are factory set; adjustments are rarely needed
    • Change jets, adjust floats & replace needles/seats without draining fuel or removing carb
    • Lightweight all-aluminum body is compatible with gasohol and blended fuels
    • Includes both timed and full vacuum ports for ignition advance

    Edelbrock 800 CFM 4 Barrel Carburetor Installation Instructions (PDF)

     

  • Lokar XDBW-6004 Midnight Series Drive-by-Wire Aluminum Throttle Pedal
    Lokar XDBW-6004 Midnight Series Drive-by-Wire Aluminum Throttle Pedal
    (Part #491XDBW6004)
    x
                Lokar has partnered with Williams Controls the world leader in heavy duty electronic throttle pedals.
    Features:
    • The first programmable electronic throttle pedal (Drive- By- Wire) for the automotive aftermarket
    • Programmable Non-Contact (Solid State) hall effect sensor for most GM, Ford & Mopar applications
    • Splined pedal arm for versatile mounting
    • All metal construction; Aluminum and Stainless Steel
    • 3 times better performance over standard OEM pedals
    • Over 90 years of combined throttle pedal experience
    • Sensor programmed on pedal to optimize electrical output for quick throttle response (No pedal lag)
    • Brushed or black finish
  • Aeromotive 11140 340 Stealth Fuel Pump, Centered Inlet
    Aeromotive 11140 340 Stealth Fuel Pump, Centered Inlet
    (Part #91011140)
    x
                

    The Aeromotive 340 Stealth Fuel Pump is a high-output, in-tank, electric fuel pump that fits most popular EFI applications. It is a compact, lightweight pump that bolts into many existing hanger assemblies.

    What sets the 340 Stealth Pump apart is its superior flow throughout a wide pressure range. Compared to other popular aftermarket pumps, at 40 psi the 340 boasts more than 340 lph. That’s over 30% more flow, making it ideal for applications requiring more flow while retaining the factory lines and mounting provisions available in the OE configuration. The 340 is also perfect for use as a universal replacement for applications that require more flow to support forced air power adders such as turbo and supercharged applications.

    • Fits most vehicles where popular aftermarket pumps are applicable
    • Designed for in-tank use only
    • Can be used in carbureted or EFI applications
    • Turbine pump mechanism increases durability and can be used in pulse modulated applications

    910-11140 Instructions (PDF)

  • Lokar S-68156 5/16-24 Inch Thread Rod End w/Nut, Pair
    Lokar S-68156 5/16-24 Inch Thread Rod End w/Nut, Pair
    (Part #491S68156)
    x
                
    • Rod Ends
    • Made In The U.S.A.
    • Lifetime Warranty
  • Lokar XSRK-4001 Black Stainless Steel Carburetor Bracket
    Lokar XSRK-4001 Black Stainless Steel Carburetor Bracket
    (Part #49104001)
    x
                

    Stainless bracket mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and In-Line Dual Quads.  Design provides improved clearance on Edelbrock carbs. Design includes tension screw to prevent bracket from movement under extreme pressure on a kickdown cable, such as with a 700-R4 transmission.

    • Mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and In-Line Dual Quads
    • Stainless steel
    • Improved clearance on Edelbrock carbs
    • Includes tension screw to prevent bracket movement under extreme pressure

    49104001 Installation Instructions (PDF) 

  • Lokar TRP-4005 Stainless Pontiac Tri-Power Throttle Cable Bracket Kit
    Lokar TRP-4005 Stainless Pontiac Tri-Power Throttle Cable Bracket Kit
    (Part #491TRP4005)
    x
                

    Designed for Rochester Tri-Power. Kit includes Stainless Steel Throttle Cable Bracket and Stainless Steel Springs.

    • Stainless bracket mounts under rear carburetor on Rochester 3-2 set-up.
    • Cables operate from center carburetor.
    • Stainless Bracket and Dual Stainless Springs are used to mount Lokar's Throttle Cable and Kickdown assemblies.
  • Waterman 935566D Dash Mount Fuel Shut Off Valve, -6 AN
    Waterman 935566D Dash Mount Fuel Shut Off Valve, -6 AN
    (Part #9109355661)
    x
                Dash mount is AN6 male with offset style handle. Fuel cell ball valve   mounts in plate. Required for many  Sprint cars. They are designed to be  plumbed inline and mount close to the driver.
    • Engineered specifically for sprint car applications
    • -6 AN male to male fuel shut off valve
    • Designed to be plumbed inline and mount close to the driver
  • Lokar TC-1000TP72 Tuned-Port 1985-91/LT1/LT4 Hi-Tech Throttle Cable
    Lokar TC-1000TP72 Tuned-Port 1985-91/LT1/LT4 Hi-Tech Throttle Cable
    (Part #491TC1000TP72)
    x
                
    • Specially Extruded Liner For Extended Cable Life
    • Aluminum Ferrules To Eliminate Fraying
    • U-Cut-To-Fit Outer Housing
    • Clevis Designed w/o Cotter Pins Or Set Screws
    • Adapts To Factory And Aftermarket Pedals
    • Made In The U.S.A.
    • Lifetime Warranty
  • Lokar TC-1000LS160 Hi-Tech LS1 / 350 Ramjet Throttle Cable, 60 Inch
    Lokar TC-1000LS160 Hi-Tech LS1 / 350 Ramjet Throttle Cable, 60 Inch
    (Part #4911000160)
    x
                Lokar Hi-Tech Throttle Cable features a stainless   steel braided  housing.  They are designed with a specially extruded liner for extended    life of the cable – not to be confused with ordinary braided brake    hose.  Cables are equipped with aluminum fittings and aluminum ferrules    to eliminate fraying.
    Kits come complete with installation instructions.
  • Russell Performance 641605 LS/Hemi EFI Fuel System Retrofit Kit
    Russell Performance 641605 LS/Hemi EFI Fuel System Retrofit Kit
    (Part #325641605)
    x
                

    This fuel pump kit provides a complete electronic fuel system for GM LS-series and Chrysler 5.7 Hemi engine swaps in muscle cars, street rods and off-road vehicles. Kit features an Edelbrock EFI fuel pump, regulator/filter, relay, Russell Pro Flex hose, an assortment of silver and black AN hose end fittings, and all mounting hardware. When using with OEM fuel tank sending units, an additional adapter to -6 male AN is required.

    • For GM/Chevy LS and Chrysler 5.7 Hemi engine swaps into older non-EFI vehicles
    • Includes Edelbrock Electric Fuel Pump # 3594
    • Includes Edelbrock Fuel Pressure Regulator
    • Returnless Fuel System
    • Supports up to 450 HP
  • Lokar TCP-1000TPVU Polished Universal 36 Inch Vortec Throttle Cable
    Lokar TCP-1000TPVU Polished Universal 36 Inch Vortec Throttle Cable
    (Part #491TCP1000TPVU)
    x
                

    Looking for more shine in your engine compartment? Try Lokar's Polished Hi-Tech Throttle Cables. Lokar's polished cables are available in stainless steel braided housing or black housing. They are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary braided brake hose.

    • Cables are equipped with polished aluminum fittings and polished aluminum ferrule to eliminate fraying.
    • "U-Cut-to-Fit" outer housing is available in 24" or 36" lengths with a "U-Cut-to-Fit" stainless inner wire.
    • Clevis is designed without cotter pins or set screws.
    • Adapts to factory and aftermarket pedals.
    • Cables mount nicely with Lokar's array of Bracket and Return Springs (sold separately).
    • Kits complete with installation instructions.
    • Pair up with a Polished Kickdown
  • Lokar XTCB-40RJ1 Midnight Series 502 Ram Jet Throttle Cable Bracket
    Lokar XTCB-40RJ1 Midnight Series 502 Ram Jet Throttle Cable Bracket
    (Part #491XTCB40RJ1)
    x
                
    • Brackets fit the GM ramjet engine.
    • These brackets along with Lokar Throttle Cables will allow the ramjet to work properly in any vehicle.
    • When used with an automatic transmission, be sure to use the transmission specific Lokar Kickdown Cable.
    • Uses TC-1000RJ throttle cable.
  • Fuel Pump Push Rod Bushing for 1949-53 Ford and Mercury Flathead V8
    Fuel Pump Push Rod Bushing for 1949-53 Ford and Mercury Flathead V8
    (Part #56052664)
    x
                

    These fuel pump push rod bushings for 1949-1953 Ford & Mercury Flathead V8 are 1-9/16" long.  They work perfect with our push rod (56052662).

    • Fuel pump push rod bushing
    • For 1949-1953 Ford & Mercury Flathead V-8
    • 1-9/16" long
    • For push rod (56052662)
  • OTB Gear 4660 Orbit Cast Spun Aluminum Air Cleaner
    New
    OTB Gear 4660 Orbit Cast Spun Aluminum Air Cleaner
    (Part #9104660)
    x
                

    This Orbit cast heavy aluminum spun air cleaner from OTB Gear has a truly unique look. The spun shell can be painted or clear coated.

    • Polished casting countersunk into heavy wall satin aluminum spinning
    • Outer shell can be painted or clear coated
    • Washable permanent filter
    • Fits standard 5" four bbl. Carb
    • Diameter 12" - height 4-1/2" 
    • Made in the USA

     

  • OTB Gear 4461 Orbit Style Air Cleaner, Offset Base, Polished
    OTB Gear 4461 Orbit Style Air Cleaner, Offset Base, Polished
    (Part #2474461)
    x
                
    The inspiration for "Orbit" came from the the '30's - '40's Ford horn button design. But repeating rings were a very popular design theme by a number of auto builders. Got twin 4's with real tight spacing? The selection of air cleaners for you has been pretty slim, right? Many manifolds out there position the carbs with only 6-7/16" center to center. This variation features a 1/4" offset base to deal with this problem - a simple solution to an old issue. If spacing this tight isn't your problem, we have a straight base also. If running twin carbs, check your center to center spacing. We use our Platinum Series air filter with A-356 aircraft grade castings for a show quality product. The filter media is a medium gray, washable oiled cloth. Prefer to have an unpolished finish? You can have that too. Hardware furnished includes a polished stainless socket drive top screw. Diameter 6-3/4" - Height 4-1/2". Fits carbs with the typical 5" base.
    • Washable Filter Media
    • Polished
    • 1/4" Offset base plate
    • Fits carbs with standard 5-1/8" neck
    • Diameter 6-3/4"
    • Height 4-1/2"
    • Hardware furnished includes a polished stainless socket drive top screw
    • Priced and sold as single assembly - purchase 2 for a twin carb application
  • Mikise Power Pic Filter Cleaner Spout
    Mikise Power Pic Filter Cleaner Spout
    (Part #910606420)
    x
                

    New economy air filter cleaner to clean your air filter from the inside out.  Hooks to a standard garden hose to direct multiple high pressure sprays streams where needed.

    • Clean your air filter from the inside out
    • Hooks to a standard garden hose
Goto Previous PagePrevious Page
1 2 3 4 5 ... 50