Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Street Rod Suspension At Speedway Motors

Speedway Motors is your number one source for street rod suspension components! Speedway stocks a huge inventory of suspension parts, plus the shocks from AFCO and Bilsein, four bar rear suspension kits, control arms and other specialized components you need to finish any hot rod suspension project. You can improve the ride of your classic street rod with Speedway’s selection of shocks, springs, or complete suspension kits. We also offer the best in air ride setups and coilover kits.

"Street Rod, Air Suspension Components" Page 1 of 1

  • RideTech 90006781 Air Spring for Mustang II Suspension
    RideTech 90006781 Air Spring for Mustang II Suspension
    x
                These air springs are the industry standard for use on Mustang II based front suspensions. Rated 2140@100 lbs air pressure. Installed height is 4-1/2"-5" with a minimum height of 3" and a maximum of 7". 6-1/2" diameter when inflated. 1/4" NPT. Two 3/8" studs on top and one 3/8" hole on bottom.
            
  • RideTech 02011036 Shockwave 9000 Air Ride Rear Kit-14.5 In Ride Height
    RideTech 02011036 Shockwave 9000 Air Ride Rear Kit-14.5 In Ride Height
    x
                

    The AirRide Technologies Shockwave 9000 will give you the ride you've been looking for. The 9000 series is 5" in diameter and can handle 1200 lbs. @ 100 psi. These work well with a rear axle weight of 1500-2400 lbs.

    Kit includes:

    • Two Shockwaves
    • Air compressor
    • Control panel
    • Mounting hardware
    • 11.56" eye to eye compressed
    • 14.50" eye to eye at ride height
    • 16.56" eye to eye fully extended
    • 5" stroke
  • Mustang II Front Air Ride Suspension Kit
    Mustang II Front Air Ride Suspension Kit
    x
                This kit fits 1974-78 Mustang II style front suspension with stock style lower control arms. Allows you to convert your stock control arm Mustang II front suspension to the popular Air Ride systems. Includes two air springs, two shocks and required brackets and hardware. Upper shock mount requires welding.
            
  • RideTech 30141001 Standard Air Ride Suspension 4 Wheel Compressor Kit
    RideTech 30141001 Standard Air Ride Suspension 4 Wheel Compressor Kit
    x
                

    Finish your air spring suspension with a complete compressor system from AirRide Technologies. Air Ride Technologies' classic, standard, non-electronic RidePRO systems use the highest quality valve bodies, compressors, and components to deliver dependable and repeatable manual control. Manual controls provide the ability to inflate or deflate system. 

    With the exception of our ShockWave kits, our air ride conversion kits DO NOT include a compressor, controls, etc. These manual-controlled systems are the right choice for bare bones installs and folks looking to for the most inexpensive way to run air suspension system.

    • Tank: 21" wide, circumference of 19 3/4", contains mounting centers which are 13" apart and 2 gallon capacity
    • Dual paddle control (front/rear)
    • 60' air line with fittings
    • Rise time: 12-15 seconds

    All Compressor Systems include:

    • Air tank
    • Compressor
    • Control panel
    • Air line and fittings
  • RideTech Shockwave 7000 Series Air Ride Rear Kit, 13 Inch Ride Height
    RideTech Shockwave 7000 Series Air Ride Rear Kit, 13 Inch Ride Height
    x
                

    The RideTech Shockwaves will give you the ride you've been looking for. The 7000 series is 4" in diameter and has a load capacity of 780 lbs. @ 100 psi air pressure. These work well with a rear axle weight of 1500 lbs. or less. No air tank required.

    Kit includes:

    • Two Shockwaves  (SKW7000)
    • Air compressor  (ARC1500)
    • Control panel  (CON1500)
    • Mounting hardware, lines and fittings
    • 10.66" eye to eye compressed
    • 13.00" eye to eye at ride height
    • 14.76" eye to eye fully extended
    • 4.1" stroke
  • RideTech 30334000 Air Ride Suspension Digital Compressor System
    RideTech 30334000 Air Ride Suspension Digital Compressor System
    x
                Finish your air spring suspension with the RidePro e2 Compressor Control System from Air Ride Technologies. High tech electronic control allows the user to program three automatic height presets. This system uses air pressure sensors to control ride height presets. Digitally controlled solenoids with three presets allows you to have, for example, an over the road setting, a fairgrounds cruise setting and a parked setting.

    RidePro e2 Systems feature:

    • 3 gallon tank
    • 4-way RidePro e2 compressor
    • 4-way RidePro solenoids
    • RidePro e controller
    • Wiring harness, airlines and fittings
    • Rise Time: 3-5 seconds
    • Controls all four air springs independently
  • RideTech 02011034 Shockwave 7000 Series Air Ride Rear Kit, 14-1/2 Inch
    RideTech 02011034 Shockwave 7000 Series Air Ride Rear Kit, 14-1/2 Inch
    x
                

    The RideTech Shockwaves will give you the ride you've been looking for. The 7000 series is 4" in diameter and has a load capacity of 780 lbs. @ 100 psi air pressure. These work well with a rear axle weight of 1500 lbs. or less. No air tank required.

    Kit includes:

    • Two Shockwaves  (SKW7000)
    • Air compressor  (ARC1500)
    • Control panel  (CON1500)
    • Mounting hardware, lines and fittings 
    • 11.56" eye to eye compressed
    • 14.50" eye to eye at ride height
    • 16.56" eye to eye fully extended
    • 5" stroke
  • RideTech 30154000 Air Ride Suspension RidePro 4-Wheel Compressor System
    RideTech 30154000 Air Ride Suspension RidePro 4-Wheel Compressor System
    x
                

    Air Ride Technologies' classic, standard, non-electronic RidePRO systems use the highest quality valve bodies, compressors, and components to deliver dependable and repeatable manual control. Manual controls provide the ability to inflate or deflate system. With the exception of our ShockWave kits, our air ride conversion kits DO NOT include a compressor, controls, etc.

    Kit includes: 

    • Tank
    • Compressor
    • Control panel
    • Electronic solenoids mount anywhere
    • 4-way independent manual control system with RidePro electric valves

    Tank Dimensions (GIF)

  • RideTech 30121000 Standard Air Ride Suspension 2 Wheel Compressor Kit
    RideTech 30121000 Standard Air Ride Suspension 2 Wheel Compressor Kit
    x
                

    Finish your air spring suspension with a complete compressor system from AirRide Technologies. Air Ride Technologies' classic, standard, non-electronic RidePRO systems use the highest quality valve bodies, compressors, and components to deliver dependable and repeatable manual control. Manual controls provide the ability to inflate or deflate system. 

    With the exception of our ShockWave kits, our air ride conversion kits DO NOT include a compressor, controls, etc. These manual-controlled systems are the right choice for bare bones installs and folks looking to for the most inexpensive way to run air suspension system.

    • Tank: 7" x 12" long, 1 gallon capacity
    • Compressor: 6" x 5" tall, 150 psi

    All Compressor Systems include:

    • Air tank
    • Compressor
    • Control panel
    • Air line and fittings
  • Garage Sale - RideTech Air Ride Technologies 1965-1970 Chevy Impala Air Ride Kit
    Garage Sale
    Garage Sale - RideTech Air Ride Technologies 1965-1970 Chevy Impala Air Ride Kit
    x
                

    This kit fits '65-'70 Chevy Impala and Caprice. Includes air springs, shocks and hardware needed to install. 

     

    Clearance! 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - RideTech Shockwave 9000 Air Ride Rear Kit, 13 Inch Ride Height
    Garage Sale
    Garage Sale - RideTech Shockwave 9000 Air Ride Rear Kit, 13 Inch Ride Height
    x
                

    The AirRide Technologies Shockwave 9000 will give you the ride you've been looking for. The 9000 series is 5" in diameter and can handle 1200 lbs. @ 100 psi. These work well with a rear axle weight of 1500-2400 lbs.

    Kit includes:

    • Two Shockwaves
    • Air compressor
    • Control panel
    • Mounting hardware
    • 10.66" eye to eye compressed
    • 13.00" eye to eye at ride height
    • 14.76" eye to eye fully extended
    • 4.1" stroke

     

    Clearance!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - Vintage Air 981412 Gen II Compac Universal Heat and Air Kit
    Garage Sale
    Garage Sale - Vintage Air 981412 Gen II Compac Universal Heat and Air Kit
    x
                Please view the product's page for more information