Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Streed Rod Air & Fuel Delivery At Speedway Motors

Speedway Motors stocks all the best names in street rod carburetors and intake manifolds! Plus, we have a great selection of fuel cells, as well as electric and mechanical fuel pumps. Don't forget to let your engine breath with filters from K&N and R2C. Whether you run alcohol or gas in your hot rod, Speedway can fuel your need for speed!

"Street Rod, Accelerator Linkage Mounts" Page 1 of 1

All

New

Garage Sale

  • Lokar TCB-40TP3 Tuned-Port Billet Aluminum Bracket w/Triple Stud
    Lokar TCB-40TP3 Tuned-Port Billet Aluminum Bracket w/Triple Stud
    SKU-491TCB40TP3
    x
                

    The billet aluminum bracket mounts to the side of the Tuned-Port plenum. The billet aluminum bracket is available with:

    • a single stud for throttle only
    • double stud for throttle and kickdown
    • triple stud for a throttle, kickdown and cruise control cable.
  • Lokar TRP-4005 Stainless Pontiac Tri-Power Throttle Cable Bracket Kit
    Lokar TRP-4005 Stainless Pontiac Tri-Power Throttle Cable Bracket Kit
    SKU-491TRP4005
    x
                

    Designed for Rochester Tri-Power. Kit includes Stainless Steel Throttle Cable Bracket and Stainless Steel Springs.

    • Stainless bracket mounts under rear carburetor on Rochester 3-2 set-up.
    • Cables operate from center carburetor.
    • Stainless Bracket and Dual Stainless Springs are used to mount Lokar's Throttle Cable and Kickdown assemblies.
  • Lokar XTCB-40RJ1 Midnight Series 502 Ram Jet Throttle Cable Bracket
    Lokar XTCB-40RJ1 Midnight Series 502 Ram Jet Throttle Cable Bracket
    SKU-491XTCB40RJ1
    x
                
    • Brackets fit the GM ramjet engine.
    • These brackets along with Lokar Throttle Cables will allow the ramjet to work properly in any vehicle.
    • When used with an automatic transmission, be sure to use the transmission specific Lokar Kickdown Cable.
    • Uses TC-1000RJ throttle cable.
  • Lokar XTCB-40TP2 Midnight Series Tuned-Port Alum Bracket w/Double Stud
    Lokar XTCB-40TP2 Midnight Series Tuned-Port Alum Bracket w/Double Stud
    SKU-491XTCB40TP2
    x
                
    • The billet aluminum bracket mounts to the side of the Tuned-Port plenum.
    • The billet aluminum bracket is available with a double stud for throttle and kickdown
  • Lokar TCB-40TP1 Tuned-Port Billet Aluminum Bracket w/Single Stud
    Lokar TCB-40TP1 Tuned-Port Billet Aluminum Bracket w/Single Stud
    SKU-491TCB40TP1
    x
                

    The billet aluminum bracket mounts to the side of the Tuned-Port plenum. The billet aluminum bracket is available with:

    • a single stud for throttle only
    • double stud for throttle and kickdown
    • triple stud for a throttle, kickdown and cruise control cable.
  • Lokar XTCB-40EFI Midnight Series Ford EFI Throttle Bracket 86-93, EGR
    Lokar XTCB-40EFI Midnight Series Ford EFI Throttle Bracket 86-93, EGR
    SKU-491XTCB40EFI
    x
                
    • Ford EFI Bracket fits 1986 to 1993, Ford 302, and 351 electronic fuel injection systems that have installed the Mustang EGR spacer.
    • This Stainless Bracket mounts in stock location for easy installation of our Kickdown Cables and Throttle Cables.
    • (1986 to 1993 uses TC-1000HT)
    • The EFI Bracket does not fit B.A.P. throttle bodies.
  • Lokar TCB-40LS1 1998-99 LS1 Throttle Cable Bracket, Single
    Lokar TCB-40LS1 1998-99 LS1 Throttle Cable Bracket, Single
    SKU-49109899
    x
                Clean up your LS1 intake manifold with this billet aluminum cable bracket. Available with a single stud for throttle only or a double stud to add cruise control or kickdown cable. Designed to work with part #491-1000LS1.
            
  • Lokar XTCB-40EDC Midnight Series Edelbrock Pro-Flo Injection Spacer
    Lokar XTCB-40EDC Midnight Series Edelbrock Pro-Flo Injection Spacer
    SKU-491XTCB40EDC
    x
                
    • CNC machined from 6061-T6 billet aluminum for strength and style
    • Dual Stainless Steel Return Springs
    • Easy installation of Lokar Throttle Cable and Kickdown kits
    • All hardware and detailed mounting instructions included
    • Recommended by Edelbrock
    • For Small Block Chevy
  • Lokar XTCB-40LT4 Midnight Series 94-Up LT1/LT4 Throttle/Kickdown Brkt
    Lokar XTCB-40LT4 Midnight Series 94-Up LT1/LT4 Throttle/Kickdown Brkt
    SKU-491XTCB40LT4
    x
                
    • Lokar's answer to LT1 cable problems.
    • Stainless Throttle and Kickdown Brackets replace factory brackets.
    • Kit includes stainless arm to mount on LT1 throttle body to operate kickdown.
    • Designed to be used with Lokar's Tuned-Port Throttle Cables and Tuned-Port Kickdowns.
  • Lokar XTCB-40LS13 Midnight Series LS1 Throttle Brkt, 00-02 GM/04 GTO
    Lokar XTCB-40LS13 Midnight Series LS1 Throttle Brkt, 00-02 GM/04 GTO
    SKU-491XTCB40LS13
    x
                
    • The billet aluminum bracket mounts to the side of the LS1 manifold
    • Available with a single stud for throttle only or a double stud to add a cruise control cable.
  • Lokar TCB-40LS14 2000-04 LS1 Throttle Cable Bracket, Double
    Lokar TCB-40LS14 2000-04 LS1 Throttle Cable Bracket, Double
    SKU-49102044
    x
                Clean up your LS1 intake manifold with this billet aluminum cable bracket. Available with a single stud for throttle only or a double stud to add cruise control cable. Designed to work with part #491-1000LS1.
            
  • Lokar TCB-40TP3P Polished Tuned-Port Billet Alum Bracket, Triple Stud
    Lokar TCB-40TP3P Polished Tuned-Port Billet Alum Bracket, Triple Stud
    SKU-491TCB40TP3P
    x
                

    The billet aluminum bracket mounts to the side of the Tuned-Port plenum. The billet aluminum bracket is available with:

    • a single stud for throttle only
    • double stud for throttle and kickdown
    • triple stud for a throttle, kickdown and cruise control cable.
  • Lokar TCB-40EDC Edelbrock Pro-Flo Injection Spacer Bracket/Spring Kit
    Lokar TCB-40EDC Edelbrock Pro-Flo Injection Spacer Bracket/Spring Kit
    SKU-491TCB40EDC
    x
                
    • CNC machined from 6061-T6 billet aluminum for strength and style
    • Dual Stainless Steel Return Springs
    • Easy installation of Lokar Throttle Cable and Kickdown kits
    • All hardware and detailed mounting instructions included
    • Recommended by Edelbrock
    • For Small Block Chevy
  • Speedway Throttle and Kickdown Cable Bracket Kit
    Speedway Throttle and Kickdown Cable Bracket Kit
    SKU-6502428
    x
                Chrome plated, fully adjustable throttle cable and automatic transmission kickdown cable bracket bolts to the corner of most 2bbl. or 4 bbl. carburetors. Steel bracket locks in place and won't swivel. Works with OEM cable housings that have square plastic ends which snap into the bracket holes.
            
  • Edelbrock 7094 Dual Quad Carburetor Linkage
    Edelbrock 7094 Dual Quad Carburetor Linkage
    SKU-3257094
    x
                

    Designed for use with Edelbrock Dual-Quad manifolds and Performer Series carburetors. This linkage kit provides smooth, progressive throttle activation using high-quality aluminum, stainless steel and brass parts with spherical rod ends.

    Fits our dual-quad manifolds (with Edelbrock Performer Series carburetors):

    • 325-5420 B/B Chevy Oval Port (Edelbrock #5420)
    • 325-5425 S/B Chevy (Edelbrock #5425) 
    • 325-5408 Chevy W-Series Small Port (Edelbrock #5408)
    • 325-5409 Chevy W-Series Large Port (Edelbrock #5409)
    • 325-7535 Ford 289-302 (Edelbrock #7535)
    • 325-7585 Ford 351W (Edelbrock #7585)
    325-7094 Instructions (PDF)
  • Lokar XTCB-40EDK Midnight Series Edelbrock Pro-Flo Injection Spacer
    Lokar XTCB-40EDK Midnight Series Edelbrock Pro-Flo Injection Spacer
    SKU-491XTCB40EDK
    x
                
    • CNC machined from 6061-T6 billet aluminum for strength and style
    • Dual Stainless Steel Return Springs
    • Easy installation of Lokar Throttle Cable and Kickdown kits
    • All hardware and detailed mounting instructions included
    • Recommended by Edelbrock
    • For Small Block Chevy
  • Lokar TCB-40LS13 2000-04 LS1 Throttle Cable Bracket, Single
    Lokar TCB-40LS13 2000-04 LS1 Throttle Cable Bracket, Single
    SKU-49102004
    x
                Clean up your LS1 intake manifold with this billet aluminum cable bracket. Available with a single stud for throttle only or a double stud to add cruise control or kickdown cable. Designed to work with part #491-1000LS1.
            
  • Lokar TCB-40RJ1 Stainless Ramjet Throttle Bracket Kit, Big Block 502
    Lokar TCB-40RJ1 Stainless Ramjet Throttle Bracket Kit, Big Block 502
    SKU-491TCB40RJ1
    x
                
    • Brackets fit the GM ramjet engine.
    • These brackets along with Lokar Throttle Cables will allow the ramjet to work properly in any vehicle.
    • When used with an automatic transmission, use the transmission specific Lokar Kickdown Cable.
    • Uses TC-1000RJ throttle cable.
  • Lokar XTCB-40BG Midnight Series BG Six Shooter Throttle/Kickdown, SBC
    Lokar XTCB-40BG Midnight Series BG Six Shooter Throttle/Kickdown, SBC
    SKU-491XTCB40BG
    x
                

    Features:

    • CNC machined from 6061-T6 billet aluminum for strength and style
    • Easy installation of Lokar Throttle Cable and Kickdown kits
    • Dual Stainless Steel Return Springs
    • All hardware and detailed mounting instructions included
    • Utilizes existing BG SixShooter Progressive Linkage
  • Lokar XTCB-40LS1 Black LS1 Throttle Bracket, 1998-99 GM, Single Stud
    Lokar XTCB-40LS1 Black LS1 Throttle Bracket, 1998-99 GM, Single Stud
    SKU-491401
    x
                

    This billet aluminum bracket mounts to the side of the LS1 manifold and is comes with a single stud for throttle only. 

  • Lokar TCB-40EDK Edelbrock Pro-Flo Injection Spacer Bracket/Spring Kit
    Lokar TCB-40EDK Edelbrock Pro-Flo Injection Spacer Bracket/Spring Kit
    SKU-491TCB40EDK
    x
                
    • CNC machined from 6061-T6 billet aluminum for strength and style
    • Dual Stainless Steel Return Springs
    • Easy installation of Lokar Throttle Cable and Kickdown kits
    • All hardware and detailed mounting instructions included
    • Recommended by Edelbrock
    • For Small Block Chevy
  • Lokar XTCB-40LS14 Midnight Series LS1 Throttle Brkt, 00-02 GM/04 GTO
    Lokar XTCB-40LS14 Midnight Series LS1 Throttle Brkt, 00-02 GM/04 GTO
    SKU-491XTCB40LS14
    x
                
    • The billet aluminum bracket mounts to the side of the LS1 manifold
    • Available with a single stud for throttle only or a double stud to add a cruise control cable.
  • Lokar TCB-40ED Edelbrock Pro-Flo Injection Spacer Only
    Lokar TCB-40ED Edelbrock Pro-Flo Injection Spacer Only
    SKU-491TCB40ED
    x
                
    • CNC machined from 6061-T6 billet aluminum for strength and style
    • Dual Stainless Steel Return Springs
    • Easy installation of Lokar Throttle Cable and Kickdown kits
    • All hardware and detailed mounting instructions included
    • Recommended by Edelbrock
    • For Small Block Chevy
  • Lokar XTCB-40RJ Midnight Series Ram Jet Throttle Cable Bracket, SB 350
    Lokar XTCB-40RJ Midnight Series Ram Jet Throttle Cable Bracket, SB 350
    SKU-491XTCB40RJ
    x
                
    • Brackets fit the GM ramjet engine.
    • These brackets along with Lokar Throttle Cables will allow the ramjet to work properly in any vehicle.
    • When used with an automatic transmission, be sure to use the transmission specific Lokar Kickdown Cable.
    • Uses TC-1000LS1 throttle cable.
  • Lokar XTCB-BG440 Midnight Series BG Six Shooter 440 Throttle Cble Brkt
    Lokar XTCB-BG440 Midnight Series BG Six Shooter 440 Throttle Cble Brkt
    SKU-491XTCBBG440
    x
                Features:
    • CNC machined from 6061-T6 billet aluminum for strength and style
    • Easy installation of Lokar Throttle Cable and Kickdown kits
    • Dual Stainless Steel Return Springs
    • All hardware and detailed mounting instructions included
    • Utilizes existing BG SixShooter Progressive Linkage
  • Lokar TCB-40LT1 1992-93 LT1 Throttle Cable and Kickdown Cable Brackets
    Lokar TCB-40LT1 1992-93 LT1 Throttle Cable and Kickdown Cable Brackets
    SKU-491TCB40LT1
    x
                

    Lokar's answer to LT1 cable problems. Stainless Throttle and Kickdown Brackets replace factory brackets.

    • Kit includes stainless arm to mount on LT1 throttle body to operate kickdown.
    • Designed to be used with Lokar's Tuned-Port Throttle Cables and Tuned-Port Kickdowns.
  • Lokar TCB-40TP2P Polished Tuned-Port Billet Alum Bracket Double Stud
    Lokar TCB-40TP2P Polished Tuned-Port Billet Alum Bracket Double Stud
    SKU-491TCB40TP2P
    x
                

    The billet aluminum bracket mounts to the side of the Tuned-Port plenum. The billet aluminum bracket is available with:

    • a single stud for throttle only
    • double stud for throttle and kickdown
    • triple stud for a throttle, kickdown and cruise control cable.
  • Lokar TCB-BG440 BG Six Shooter 440 Mopar Throttle/Kickdown Bracket Kit
    Lokar TCB-BG440 BG Six Shooter 440 Mopar Throttle/Kickdown Bracket Kit
    SKU-491TCBBG440
    x
                
    • CNC machined from 6061-T6 billet aluminum for strength and style
    • Easy installation of Lokar Throttle Cable and Kickdown kits
    • Dual Stainless Steel Return Springs
    • All hardware and detailed mounting instructions included
    • Utilizes existing BG SixShooter Progressive Linkage
  • Lokar XTCB-40LS12 Midnight Series LS1 Throttle Cable Bracket, 98-99 GM
    Lokar XTCB-40LS12 Midnight Series LS1 Throttle Cable Bracket, 98-99 GM
    SKU-491XTCB40LS12
    x
                
    • The billet aluminum bracket mounts to the side of the LS1 manifold
    • Available with a single stud for throttle only or a double stud to add a cruise control cable.
  • Lokar TRP-4004 Stainless Steel Tri-Power Throttle Cable Bracket Kit
    Lokar TRP-4004 Stainless Steel Tri-Power Throttle Cable Bracket Kit
    SKU-491TRP4004
    x
                
    • Designed for Rochester Tri-Power.
    • Stainless bracket mounts under rear carburetor on Rochester 3-2 set-up.
    • The Stainless Bracket is used to mount Lokar's Throttle Cable and Kickdown assemblies.
  • Lokar TCB-40LTC 1992 & Later LT1 Cruise Control Bracket Kit
    Lokar TCB-40LTC 1992 & Later LT1 Cruise Control Bracket Kit
    SKU-491TCB40LTC
    x
                

    Lokar's answer to LT1 cable problems. Stainless Throttle and Kickdown Brackets replace factory brackets.

    • Kit includes stainless arm to mount on LT1 throttle body to operate kickdown.
    • Designed to be used with Lokar's Tuned-Port Throttle Cables and Tuned-Port Kickdowns.
  • Lokar XTCB-40TP1 Midnight Series Tuned-Port Alum Bracket w/Single Stud
    Lokar XTCB-40TP1 Midnight Series Tuned-Port Alum Bracket w/Single Stud
    SKU-491XTCB40TP1
    x
                
    • The billet aluminum bracket mounts to the side of the Tuned-Port plenum
    • The billet aluminum bracket is available with a single stud for throttle only
  • Lokar XTCB-40LT1 Midnight Series 92-93 LT-1 Throttle/Kickdown Bracket
    Lokar XTCB-40LT1 Midnight Series 92-93 LT-1 Throttle/Kickdown Bracket
    SKU-491XTCB40LT1
    x
                
    • Lokar's answer to LT1 cable problems.
    • Stainless Throttle and Kickdown Brackets replace factory brackets.
    • Kit includes stainless arm to mount on LT1 throttle body to operate kickdown.
    • Designed to be used with Lokar's Tuned-Port Throttle Cables and Tuned-Port Kickdowns.
  • Lokar TCB-40TP1P Polished Tuned-Port Billet Alum Bracket Single Stud
    Lokar TCB-40TP1P Polished Tuned-Port Billet Alum Bracket Single Stud
    SKU-491TCB40TP1P
    x
                

    The billet aluminum bracket mounts to the side of the Tuned-Port plenum. The billet aluminum bracket is available with:

    • a single stud for throttle only
    • double stud for throttle and kickdown
    • triple stud for a throttle, kickdown and cruise control cable.
  • Lokar XTCB-40TP3 Midnight Series Tuned-Port Alum Bracket w/Triple Stud
    Lokar XTCB-40TP3 Midnight Series Tuned-Port Alum Bracket w/Triple Stud
    SKU-491XTCB40TP3
    x
                
    • The billet aluminum bracket mounts to the side of the Tuned-Port plenum.
    • The billet aluminum bracket is available with a triple stud for a throttle, kickdown and cruise control cable.
  • Lokar XTCB-40ED Midnight Series Edelbrock Pro-Flow Spacer Only
    Lokar XTCB-40ED Midnight Series Edelbrock Pro-Flow Spacer Only
    SKU-491XTCB40ED
    x
                
    • CNC machined from 6061-T6 billet aluminum for strength and style
    • Dual Stainless Steel Return Springs
    • Easy installation of Lokar Throttle Cable and Kickdown kits
    • All hardware and detailed mounting instructions included
    • Recommended by Edelbrock
    • For Small Block Chevy