Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 2

Products

Body

Shop Street Rod Body, Interior & Gauges At Speedway Motors

Speedway Motors is the street rodder's source for body parts, gauges, and interior accessories! Find all the essential fiberglass body components, gauge sets by Stewart Warner and Auto Meter, and hot rod bomber seats, in our online catalog. While you are there, check out our full line of script emblems, rear view mirrors, windshields, fiberglass hoods and grilles. Complete your hot rod with sound proof insulation from Dynalite and Hushmat. Don't forget about Speedway's hot rod bomber seats for your traditional street rod, too!

Filter

"Street Rod, 1935-40 Ford" Page 1 of 2

Page 1 of 2

All

New

On Sale

Garage Sale

  • 1935-1940 Ford Front Frame Boxing Plates
    1935-1940 Ford Front Frame Boxing Plates
    (Part #91054443)
    x
                

    When using original or reproduction frame rails, be sure to fully box the front section for strength and saftey. Our front boxing plates are designed to box the frame in critical front suspension attachment points and motor mount areas.

    10 gauge.

  • 1940 Ford Glove Box Liner for Car
    1940 Ford Glove Box Liner for Car
    (Part #91043040)
    x
                

    This glove box liner is die stamped out of waterproof cardboard and lined with original taupe material. Includes mounting hardware. Fits all car body styles of the 1940 Ford.

    Note: Fits all body styles of 1940 Ford cars. Not compatible with 1940 Ford trucks.

  • 1940 Ford Deluxe Grille
    $399.99
    Product Rating: 4.67 Stars
    1940 Ford Deluxe Grille
    (Part #91132330)
    x
                An exact reproduction, pressure die cast like original. 3-piece set: center piece, left and right sides. Plated in beautiful chrome with crank hole.
            
  • 1938-40 Ford Fiberglass Rear Fenders, Stock Width
    1938-40 Ford Fiberglass Rear Fenders, Stock Width
    (Part #9003940)
    x
                

    Fits the following Ford applications: 1938 Deluxe sedan, 1939-1940 Standard or Deluxe, coupes and sedans. Will not fit pickup trucks. Accepts stock running board. Features a glossy gelcoat finish that is ready for paint preparations.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery.

    Truck Freight Shipping Charges Apply - click here for details

  • 1932-36 Ford Windshield Swivel for Square Tubing Frame, Chrome
    1932-36 Ford Windshield Swivel for Square Tubing Frame, Chrome
    (Part #91133106)
    x
                

    These windshield frame cone swivels will work perfect for your 1932-1936 Fords with square tubing windshield frames.

    • 1932-36
    • Ford Square Tubing Windshield Frames
    • Mount these at pivot point of stanchion
    • Available in die cast chrome
    • Sold each

    Windshield Mount Guide (GIF)

  • Speedway 1935-40 Ford Bolt-In Rear Frame Cross Support
    Speedway 1935-40 Ford Bolt-In Rear Frame Cross Support
    (Part #91083540)
    x
                

    Bolt in channeled rear support and gussets for '35-'40 Ford cars. It includes a crossmember and the bolts to attach it.

    910-83540 Instructions (PDF)

  • 1933-36 Ford License Plate Bracket, Front
    1933-36 Ford License Plate Bracket, Front
    (Part #91130103)
    x
                

    These front license plate mounting brackets are designed to fit 1933-1936 Ford passenger cars. This license tag bracket is available in black or polished stainless steel finishes.  Our brackets could be used on many applications. It will mount to any flat surface and has two mount holes at the base, approximately 2-1/8" center-to-center.

    • 1933-1936 Ford passenger cars
    • Mounts to original style bumper on passenger side or to any flat surface
    • Has two mount holes at the base, approximately 2-1/8" center-to-center
    • Available in black or polished stainless steel finishes
  • 1940 Ford Dash Panel
    $179.99
    1940 Ford Dash Panel
    (Part #91139540)
    x
                

    This billet aluminum dash panel accepts Autometer street rod gauges and will be the finishing touch for your 1940 Ford dash.

    • Accepts Auto Meter or similar gauges
    • Panel held in place with four tabs that screw in from the back side
    • Speedometer hole is 3-3/16" I.D.
    • Gauge holes are 2-1/16" I.D.
    • Includes three recessed 5/32" holes for L.E.D. high beam and turn signal indicators
  • 1937 Ford Car Grille w/ Crank Hole
    1937 Ford Car Grille w/ Crank Hole
    (Part #91132320)
    x
                

    This superb quality reproduction grille fits 1937 Ford passenger cars only. Includes crank hole, just like the original. Plain steel finish.

    • 11" wide at bottom
    • 22-3/8" wide at top
    • While laying on floor on four corners, the upper front center point is 11-3/8" from the floor
    • From a line between the upper rear corners to the front upper center point is 12-5/8"
    • Crank hole is down 23" from top center to 25-1/4"
    • Center front molding included has crank hole that measures 1-3/4" tall by 7/8" wide (not chrome)
  • 1935-40 Ford Bolt-In Tubular X-member
    1935-40 Ford Bolt-In Tubular X-member
    (Part #91063540)
    x
                

    Designed for stock, original 1935-1940 Ford frames. Made of 1-1/2" O.D., .095" wall steel tubing. Includes bolt-in boxing plates, drop-out transmisson mount, brake pedal and booster/master cylinder mount and hardware

    Bolt-in brake pedal kit sold separately.

    91063540 Instructions (PDF)

  • 1932-36 Ford Windshield Swivel, Square Tubing Frame, Stainless Steel
    1932-36 Ford Windshield Swivel, Square Tubing Frame, Stainless Steel
    (Part #91133107)
    x
                

    These windshield frame cone swivels will work perfect for your 1932-1936 Fords with square tubing windshield frames.

    • 1932-36
    • Ford Square Tubing Windshield Frames
    • Mount these at pivot point of stanchion
    • Available in die cast stainless steel
    • Sold each

    Windshield Mount Guide (GIF)

  • 1935-1936 Ford Open Cars Glove Box Liner
    1935-1936 Ford Open Cars Glove Box Liner
    (Part #91043036)
    x
                These glove box liners for 1935-1936 Ford Roadster and Convertible are die stamped out of waterproof cardboard and lined with original style taupe material. Includes mounting hardware.
            
  • 1935-36 Ford Closed Car Windshield Frame
    1935-36 Ford Closed Car Windshield Frame
    (Part #55535301)
    x
                

    Mr. Roadster is the nation's largest builder and supplier of superior windshield frames. Steel reproduction windshield for '35-'36 Ford closed cars (not pick-up trucks). Frame has two sets of 3 holes on the top for the hinges and one pair of holes on the bottom for the tip-out latch mechanism. Available in plain steel finish.

    • 44-1/2" wide
    • 14-1/4" tall

    Note: No glass or windshield rubber included with our windshield frames.

  • 1933-36 Ford License Plate Bracket, Rear
    1933-36 Ford License Plate Bracket, Rear
    (Part #91138103)
    x
                

    These rear license plate mounting brackets are designed to fit 1933-1936 Ford passenger cars. This license tag bracket is available in black or polished stainless steel finishes.  These reproduction brackets are designed to fit between the driver's side rear taillight bracket and taillight.

    • 1933-1936 Ford passenger cars
    • Mounts to original style driver's side rear taillight bracket and taillight
    • Available in black or polished stainless steel finishes
  • 1935-36 Ford Cabriolet Windshield Frame
    1935-36 Ford Cabriolet Windshield Frame
    (Part #55535201)
    x
                Mr. Roadster is the nation's largest builder and supplier of superior windshield frames. Steel reproduction windshield frame for '35-'36 Ford Cabriolet. Plain steel finish.  

    Note: This is a frame only - no hinges, hardware, glass, or windshield rubber is included with this windshield frame.

  • 1940 Ford Instrument Dash Panel, Chrome
    1940 Ford Instrument Dash Panel, Chrome
    (Part #91192711)
    x
                

    This reproduction 1940 Ford dash panel is exactly like original. To install you'll just need to remove your gauge cluster, not the entire dash panel.

    • Chrome finish
    • Exact die cast reproduction of original
    • 1940 Fords

     

  • Bolt-In 1935-40 Ford Mustang II Crossmember
    Bolt-In 1935-40 Ford Mustang II Crossmember
    (Part #91043540)
    x
                Please view the product's page for more information
            
  • 1938-1939 Ford Glove Box Liners
    1938-1939 Ford Glove Box Liners
    (Part #91043038)
    x
                Glove box liners are die stamped out of waterproof cardboard and lined with original style taupe material. Includes mounting hardware for '38-'39 Ford (closed cars).
            
  • 1939-40 Ford Front Fenders
    $279.99
    1939-40 Ford Front Fenders
    (Part #9003930)
    x
                These fiberglass 1939-40 Ford front fenders are designed for passenger cars. Fronts fit 1939 Ford Deluxe, 1940 Deluxe and Standard. Choose left hand or right hand. Ships truck freight.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

    Truck Freight Shipping Charges Apply - click here for details

  • Ford Door Hinge Pin Mirrors
    $39.99
    Product Rating: 4.43 Stars
    Ford Door Hinge Pin Mirrors
    (Part #91017741)
    x
                

    All mirror heads are Stainless Steel. Arms are die cast and chrome plated and work on either the left or right side. Hinge pins are included. Fits 2-1/4" hinge.  Pin diameter is .276 and knurled at the top for a tap in application.

     

    Fits 1935-1940 Ford passenger cars and 1948-1952 Ford pickups. Sold each.

Goto Previous PagePrevious Page
1 2