Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Street Rod Body, Interior & Gauges At Speedway Motors

Speedway Motors is the street rodder's source for body parts, gauges, and interior accessories! Find all the essential fiberglass body components, gauge sets by Stewart Warner and Auto Meter, and hot rod bomber seats, in our online catalog. While you are there, check out our full line of script emblems, rear view mirrors, windshields, fiberglass hoods and grilles. Complete your hot rod with sound proof insulation from Dynalite and Hushmat. Don't forget about Speedway's hot rod bomber seats for your traditional street rod, too!

"Street Rod, 1933-34 Ford" Page 1 of 2

  • 1934 Ford Blue Oval Radiator Emblem
    1934 Ford Blue Oval Radiator Emblem
    x
                

    These replacement Ford radiator emblems are made of chrome and blue porcelain, just like original. They are oval-shaped with classic Ford script. Fits 1934 Ford passenger car only.

    • OEM replacement
    • "Ford" script
    • Fits 1934 Ford passenger car only
    • Works with our 1934 Ford bezel (91132104)
    • Chrome and blue porcelain construction
    • Has stud and nut on back side
  • 1933-34 Ford Car Cowl Vent Hinge Handle
    1933-34 Ford Car Cowl Vent Hinge Handle
    x
                This cowl vent hinge handle fits 1933-1934 Ford passenger cars. Cowl vent handle is constructed from solid brass and plated with chrome.
            
  • 1934 Ford Car Bumper
    $279.99
    $299.99
    1934 Ford Car Bumper
    x
                
    • Chrome
    • Fits both front and rear
    • 26 inches between bolts
  • 1933-1934 Ford Front Frame Boxing Plates
    1933-1934 Ford Front Frame Boxing Plates
    x
                

    When using original or reproduction frame rails, be sure to fully box the front section for strength and saftey. Our front boxing plates are designed to box the frame in critical front suspension attachment points and motor mount areas. 

    10 gauge

     

  • 1933-34 Ford Roadster Windshield Frame, 2 Inch Chopped, Chrome
    1933-34 Ford Roadster Windshield Frame, 2 Inch Chopped, Chrome
    x
                

    Mr. Roadster is the nation's largest builder and supplier of superior windshield frames. Available in plain steel or chrome plated steel.

    • 11-3/4" tall
    • 41-5/8" wide @ bottom
    • 44-15/16" wide @ top

    Note: No glass or windshield rubber included with our windshield frames.

  • 1934 Ford Roadster Outside Door Handles
    1934 Ford Roadster Outside Door Handles
    x
                

    These are replacement exterior door handles for the 1934 Ford roadsters.  They are stock style and come in a chrome plated finish.

    • Stock replacement
    • Fits 1934 open cars, 1934 Ford roadsters
    • Chrome plated
    • Sold in pairs

    Don't forget to include new gasket seal handle pads (751B702356BS) with these door handles.

  • 1933-34 Ford Radiator Splash
    $79.99
    1933-34 Ford Radiator Splash
    x
                This 1933-34 Ford splash for radiators fits all models except pick-up. Fiberglass construction. 

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • 1934 Ford Rear Bumper Brackets, Passenger Car
    1934 Ford Rear Bumper Brackets, Passenger Car
    x
                

    These rear bumper brackets for 1934 Fords are reproductions of the originals and are of heavy duty steel construction.  They fit '34 Ford passenger cars and are sold as a pair of 2.

    • OEM replacements
    • 1934 Fords, passenger cars
    • Heavy duty steel
    • Sold in pairs

    Note:  Rear bumper brackets for the 1934 Ford use the common frame width of 44” outside to outside of the rails.

     

  • 1932-36 Ford Windshield Swivel for Square Tubing Frame, Chrome
    1932-36 Ford Windshield Swivel for Square Tubing Frame, Chrome
    x
                

    These windshield frame cone swivels will work perfect for your 1932-1936 Fords with square tubing windshield frames.

    • 1932-36
    • Ford Square Tubing Windshield Frames
    • Mount these at pivot point of stanchion
    • Available in die cast chrome
    • Sold each

    Windshield Mount Guide (GIF)

  • 1933-1934 Ford Steel Firewall
    $319.99
    1933-1934 Ford Steel Firewall
    x
                Fits 1933-34 Ford passenger cars. A  perfect replacement for your missing, butchered up, or hole-filled original. Bare steel. 

    This firewall has a 3/4" flange on the sides and top under the cowl area. This is a smoothie firewall and not the OEM replacement that had large rolled beads in a V pattern. The very upper section under the cowl has three small beads rolled into it horizontally.

    From the sides, towards the center 4-1/2" there is a corner at approximately 30 degrees and turns rearward 3". The flat area at rear of engine is 19" wide. This is not a completely recessed firewall, only in the area rear of the engine. Flange on sides and top are for plug welding in original location and further recessing would require additional fabrication.
  • 1932-34 Ford Rumble Seat, Decklid Handle Gasket
    1932-34 Ford Rumble Seat, Decklid Handle Gasket
    x
                
    • OD 1-15/16"
    • ID 3/4"
    • 1/8" thick
  • 1933-36 Ford License Plate Bracket, Front
    1933-36 Ford License Plate Bracket, Front
    x
                

    These front license plate mounting brackets are designed to fit 1933-1936 Ford passenger cars. This license tag bracket is available in black or polished stainless steel finishes.  Our brackets could be used on many applications. It will mount to any flat surface and has two mount holes at the base, approximately 2-1/8" center-to-center.

    • 1933-1936 Ford passenger cars
    • Mounts to original style bumper on passenger side or to any flat surface
    • Has two mount holes at the base, approximately 2-1/8" center-to-center
    • Available in black or polished stainless steel finishes
  • Threaded Windshield Stud, 1928-36 Ford, 3/8 In X 3/8 In NF X 2 In
    Threaded Windshield Stud, 1928-36 Ford, 3/8 In X 3/8 In NF X 2 In
    x
                

    These threaded windshield studs feature a stop and include one stud and one cone nut. They are zinc plated for longevity. Fits 1928-31 Model A and 1932-36 Ford.

    • Steel material
    • (1) stud, (1) cone nut
    • Sold each

    Not included in our windshield kits.

  • 1932-36 Ford Windshield Swivel, Square Tubing Frame, Stainless Steel
    1932-36 Ford Windshield Swivel, Square Tubing Frame, Stainless Steel
    x
                

    These windshield frame cone swivels will work perfect for your 1932-1936 Fords with square tubing windshield frames.

    • 1932-36
    • Ford Square Tubing Windshield Frames
    • Mount these at pivot point of stanchion
    • Available in die cast stainless steel
    • Sold each

    Windshield Mount Guide (GIF)

  • 1934 Front Fender Rear Braces
    1934 Front Fender Rear Braces
    x
                    Heavy duty stamped steel. Also supports 1933-1934 Ford headlight. A must for strength and durability. Rear brace for front fender. Not for pick-up or truck.       
            
  • 1928-37 Ford Rumble-Seat Lid Latch Striker
    1928-37 Ford Rumble-Seat Lid Latch Striker
    x
                

    This striker for 1928-31 Model A and 1932-37 Ford car rumble-seat lid lock mechanisms will keep your lid latched and secure when not in use. These quality steel strikers may be used as universal application as well.

    • Steel Material
    • For rumble-seat lid lock mechanisms (p/n 91126101)
    • Will work on trunk applications
  • 1933-1940 Ford Oval Head Bumper Bolts
    1933-1940 Ford Oval Head Bumper Bolts
    x
                

    These replacement oval head bumper bolts feature a stainless steel cover. They fit 1933-40 Fords and many others.

    • Replacement oval head bumper bolt
    • Stainless steel cover
    • Fits 1933-40 Fords and many others
    • Includes nut and lockwasher

     

  • 1934 Ford Fiberglass Hood
    $199.99
    1934 Ford Fiberglass Hood
    x
                

    One piece top with side reveal puff line.  Fiberglass construction.

    Note: This hood is an outer skin only and will require fabrication and additional mounting hardware.  You may be required to obtain original components for your application.

    The slot and round hole at the front of the hood as pictured, that originally was for part of the grille shell and radiator cap, is not cut out. It is marked so the customer can cut it or do a little finish work and eliminate it for a custom application. 

    • The center body line is 35-3/8" long
    • Overall length at center line is 42-1/4"
    • Overall side length is 46"
    • Overall width at rear is approximately 45-1/2"
    • Overall width at front is approximately 19"

    There is no inner structure in this hood, it is the outer shell only. There is no body puff line in the grille and radiator cap area like OEM hoods. 

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • 1933-36 Ford License Plate Bracket, Rear
    1933-36 Ford License Plate Bracket, Rear
    x
                

    These rear license plate mounting brackets are designed to fit 1933-1936 Ford passenger cars. This license tag bracket is available in black or polished stainless steel finishes.  These reproduction brackets are designed to fit between the driver's side rear taillight bracket and taillight.

    • 1933-1936 Ford passenger cars
    • Mounts to original style driver's side rear taillight bracket and taillight
    • Available in black or polished stainless steel finishes
  • 1933-1934 Ford Dash Panel, Stewart Warner Gauges
    1933-1934 Ford Dash Panel, Stewart Warner Gauges
    x
                

    These beautiful billet aluminum dash panels are the perfect finishing touch for your interior. These are held into a factory dash or equivalent fiberglass dash with four tabs that attach to the back of the billet panel with 4 machine screws, which are included. This billet panel sits down into the recess lip of the factory or aftermarket dash. For use with Stewart Warner gauges.

    This panel features three drilled and recessed holes that can be used for mini LED indicator lights. The inside diameter of the hole is 5/32" and the recess around the hole is nearly 1/4" wide for the light bezel around the bulb. The three holes would serve for high beam indicator, and left and right turn indicators.

    Entire thickness of this panel is 3/8" with 1/4" going through the dash opening and the remaining 1/8" being the lip that sits into the factory style recessed lip of the dash. Designed for a 3-3/8" O.D. speedometer and 2-1/16" O.D. auxillary Stewart Warner gauges. 

  • 1933-1934 Ford Car Cowl Vent Hinge
    1933-1934 Ford Car Cowl Vent Hinge
    x
                This cowl vent hinge assembly fits 1933-1934 Ford passenger cars. Hinge assembly is zinc plated steel that is painted black.
            
  • 1934 Ford Heavy Steel Chrome Bumper, Front or Rear
    1934 Ford Heavy Steel Chrome Bumper, Front or Rear
    x
                

    These triple chome plated bumpers are designed to replace your old, rusted, bent, or missing 1934 Ford passenger car bumpers.  They fit both front and rear.

    • Original style replacement
    • 1934 Ford passenger cars
    • Triple chrome plated
    • Fits both front and rear
    • Overall length is 62-3/8"
    • Overall height of bumper surface is 3-1/2"
  • 1933-34 Ford Roadster and Phaeton Windshield Frame, Chrome
    1933-34 Ford Roadster and Phaeton Windshield Frame, Chrome
    x
                

    Mr. Roadster is the nation's largest builder and supplier of superior windshield frames. These steel reproduction '33-'34 Ford Roadster & Phaeton windshield frames are guaranteed to fit like factory replacements.

    Note: No glass or windshield rubber included with our windshield frames.

  • 1928-34 Ford Closed Car Outside Door Handle Pads
    1928-34 Ford Closed Car Outside Door Handle Pads
    x
                

    These exterior door handle pad gaskets are for 1928-31 Model A and 1932-34 Ford closed car door handles. They are made from strong rubber material and fit between the door and the door handle base to protect your door as well as securing a tight seal.

    Sold as a pair.

  • 1933-1934 Ford Dash Panel-Auto Meter Gauges
    1933-1934 Ford Dash Panel-Auto Meter Gauges
    x
                

    These beautiful billet aluminum dash panels are the perfect finishing touch for your interior. These are held into a factory dash or equivalent fiberglass dash with four tabs that attach to the back of the billet panel with 4 machine screws, which are included. This billet panel sits down into the recess lip of the factory or aftermarket dash. For use with AutoMeter gauges.

    This panel features three drilled and recessed holes that can be used for mini LED indicator lights such as # 911-31050-color. The inside diameter of the hole is 5/32" and the recess around the hole is nearly 1/4" wide for the light bezel around the bulb. The three holes would serve for high beam indicator, and left and right turn indicators.

    • The inside of the Speedo hole is 3.178" and the outer lip is 3.325"
    • Accessory gauge holes have an inside of 2.070" and an outer lip of 2.250"
    • The light holes in this panel are .165" with an outer lip of .250"

    Entire thickness of this panel is 3/8" with 1/4" going through the dash opening and the remaining 1/8" being the lip that sits into the factory style recessed lip of the dash. 

  • 1933-34 Ford Cowl Vent Lid
    $64.99
    1933-34 Ford Cowl Vent Lid
    x
                Original style and look for your 1933-1934 Ford. Item is made of fiberglass.
            
  • 1933-34 Ford Windshield Rubber, 3-Window Passenger Closed Car
    1933-34 Ford Windshield Rubber, 3-Window Passenger Closed Car
    x
                

    These windshield rubber seals fit between the windshield frame and body. They are not supplied with our windshield frames.  Designed for 1933-34 Ford 3-window passenger closed cars.

    • Fit between the windshield frame and body
    • Designed for 1933-34 Ford closed cars
    • Not supplied with our windshield frames


  • 1928-1933 Ford Open Car Outside Door Handle
    1928-1933 Ford Open Car Outside Door Handle
    x
                

    These chrome reproduction exterior door handles fit 1928-1931 Model A and 1932-1933 Ford Roadster and Phaeton open top cars, either left or right side. They secure to the car door with two screws and a 5/16" attachment shaft.

    • Chrome plated steel
    • Left and right are the same
    • High quality steel material
  • 1932-39 Ford Open Car Windshield Rubber
    1932-39 Ford Open Car Windshield Rubber
    x
                

    These windshield rubber seals fit between the windshield frame and body. They are not supplied with our windshield frames.  Designed for 1932-39 Ford Roadster, Phaeton and other open top cars.

    • Fit between the windshield frame and body
    • 1932-39 Ford Roadster, Phaeton and other open top cars
    • Not supplied with our windshield frames
    • "T" Style rubber
    • 3/16" wide at top, 1" tall
    • 8 foot piece

     


  • 1933-34 Ford Roadster Windshield Frame, 2 In Chopped Open Top, Chrome
    1933-34 Ford Roadster Windshield Frame, 2 In Chopped Open Top, Chrome
    x
                

    Mr. Roadster is the nation's largest builder and supplier of superior windshield frames. Open top style has no top frame piece and uses glass edge for top seal. Available in chrome plated steel only.

    • 11-3/4" tall
    • 41-5/8" wide @ bottom
    • 44-15/16" wide @ top

    Note: No glass or windshield rubber included with our windshield frames.

  • 1933-34 Ford Front Crossmember
    $109.99
    1933-34 Ford Front Crossmember
    x
                This reproduction 1933-34 Ford front crossmember maintains the height of a stock Ford crossmember. It directly replaces a cracked original, or use it to start your reproduction frame off right. Made of heavy, 7-gauge steel with clearance for 1-3/4" cross spring. Welds to frame boxing plates of original or repro chassis. Includes weld-in tabs for radiator mounting.  Fender stay mounts welded to top of crossmember.

    Width on centerline is 23.5" edge to edge.




  • 1933-34 Ford Roadster Dash
    $99.99
    Product Rating: 5.00 Stars
    1933-34 Ford Roadster Dash
    x
                
            
  • 1932-36 Ford Roadster Windshield Finger Pulls
    1932-36 Ford Roadster Windshield Finger Pulls
    x
                

    Standard equipment and a must for opening and closing the windshield. Chrome plated. Fits Roadster and Phaeton only.

    Note: Reproduction frames are not drilled for finger pulls.

  • 1933-34 Ford Front Fender Connector, Chrome
    1933-34 Ford Front Fender Connector, Chrome
    x
                

    These front fender connectors are designed for 1933-34 Fords.  They connect fenders together at bottom (under the grill).

    • 1933-34 Ford front fenders
    • Connect fenders together at bottom (under the grill)
    • Steel construction
    • Chrome finish

    Note: This front fender connector works successfully on steel fenders. The gap at the front for the fenders is obtainable by adjusting, bending, or even modifying the fender braces/headlight mounts as needed. Once the small gap is achieved then the connector and stock dimensioned grille will both go in place. No modification to the fenders is normally required but with variations in manufacturers in some instances some grinding for fitment is necessary.

  • 1933-1934 Ford Cabriolet Windshield Frame
    1933-1934 Ford Cabriolet Windshield Frame
    x
                

    Mr. Roadster is the nation's largest builder and supplier of superior windshield frames. Steel reproduction '33-'34 Ford Cabriolet windshield frames. Includes hole for mounting wiper as well as original mounting holes with threaded inserts. Plain steel finish. 

    • 11-7/16" tall @ center
    • 13" tall @ sides
    • 42-3/4" wide @ top
    • 41-7/8" wide @ bottom

    Note: No glass or windshield rubber included with our windshield frames.

  • 1933-34 Ford Chrome Bumper Guards
    1933-34 Ford Chrome Bumper Guards
    x
                

    These bumper guards are OEM reproductions for your 1933-34 Ford. They feature the original black stripe down the center and are available in a chrome finish. Front and rear are the same. Sold each.

    • OEM reproductions
    • 1933-34 Fords
    • Original black stripe
    • Chrome finish
    • Front and rear are the same
    • Sold each

    Note:  Round-headed type bumper bolts are required to install these bumper guards.  Speedway Motors does not offer this type of bolt currently.

     

  • 1933-34 Ford Roadster Windshield Frame, 2 Inch Chopped, Plain
    1933-34 Ford Roadster Windshield Frame, 2 Inch Chopped, Plain
    x
                

    Mr. Roadster is the nation's largest builder and supplier of superior windshield frames. Available in plain steel or chrome plated steel.

    • 11-3/4" tall
    • 41-1/2" wide @ bottom
    • 44-5/8" wide @ top

    Note: No glass or windshield rubber included with our windshield frames.

  • 1933-34 Ford Deck Lid Latch
    $5.99
    Product Rating: 5.00 Stars
    1933-34 Ford Deck Lid Latch
    x
                Trunk lid latch for 1933-1934 Ford roadster and coupe.
            
  • 1932-36 Ford Closed Car Inside Rearview Mirror
    1932-36 Ford Closed Car Inside Rearview Mirror
    x
                

    Polished stainless steel interior rearview mirror for 1932-1936 Ford closed cars. OEM design using superior stainless steel material.

    Mounts to the windshield header. The body part above the windshield and attaches with 3 screws via a triangle shaped bracket.

  • 1933-34 Ford Deck Lid
    $349.99
    1933-34 Ford Deck Lid
    x
                            Two piece Roadster and Coupe, inner panel installed. Oversize UPS. Fiberglass construction.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

Goto Previous PagePrevious Page
1 2