The Speedway Lo-Boy is one of the most celebrated kit cars ever. Featured in Hot Rod Magazine, Street Rodder, and Rod & Custom Magazine, this car has recieved a great deal of publicity and acclaim. Correctly styled and authentically reproduced, the Lo-Boy Roadster revitalizes the hot rodding spirit that made the 1932 Ford a legend in America’s automotive history books. Designed for nostalgic originality, the Lo-Boy features a unique channeled look, which was quite popular in the early days of hot rodding.
"Street Rod, 1932 Lo-Boy" Page 1 of 1
$3.99More InfoUniversal Expanding Body Mountsx
If you are building a lightweight car like a "T" or an "A", mounting the body may present a problem. These neat expanding rubber universal body mounts allow you to drill a 3/4" hole in the top of the frame, insert a 3/8" coarse bolt, tighten, then the body is mounted.
Not recommended for cars newer than 1934.
$199.99More Info1932 Ford Chopped Grille Shellsx
This 1932 Lo-Boy grille shell features a full hood mounting lip and has the filler cap/trim piece area smoothed over. Fiberglass construction. 4-1/2" chopped from stock height.
- Height for radiator to fit through is 27-1/2"
- Wide for radiator is 18-3/4"
- Overall width = 8"
- Depth of the grill from front = 1-3/4"
- Depth of the grill from rear = 3-5/8"
This product is made to order-quantities may vary. Please allow three to four weeks lead time.
$169.99More Info1932 Ford Fiberglass Hood, 5/8 Inch Longerx
One piece fiberglass hood with side flange. Top only, no sides. This is an outer skin only and will require fabrication and additional mounting hardware. You may be required to obtain original components for your application. Features a glossy gelcoat finish that is ready for paint preparations. The hood may require some trimming to fit your body and to achieve your desired panel gaps.
Ships UPS oversize.
This product is usually in stock. However, if it is not, please allow three to four weeks for delivery.
$59.99More InfoChrome Deck Lid Hingesx
The compact design of these chrome deck lid hinges allow easy installation of all types of trunk lids and access panels.
- Each half is 3" long
- Each half is .496" wide and .496" tall
- Two attachment studs per half 3/4" center to center
- First attachment stud is 1/2" from end
- Studs are 3/4" long and come with nuts and washers
- 5.50" Overall Length
- 1.1875" Width at Hinge
$279.99More Info1932 Lo-Boy Hood Top & Sidesx
This kit includes a fiberglass hood top and two fiberglass side panels which roll under the frame. Hood measures 32-5/8". Fits Speedway 1932 Lo-Boy.
$6,999.99More Info1932 Lo-Boy Roadster Body Kitx
If you have ever wanted a 1932 Roadster but don't like the cramped cockpit, Speedway has the answer! We started with a clean slate and no expense was spared in the development of this classic street rod. By stretching the chassis and adding 2" to the length of the doors, you are able to get in and out of the car much easier. Also by moving the seat back 2", you have much more leg room and a smoother ride than an original 1932 Ford.
The Speedway Lo-Boy has been one of the most celebrated kit cars ever. Featured in Hot Rod Magazine, Street Rodder, and Rod & Custom Magazine, this car has recieved a great deal of publicity and acclaim. Correctly styled and authentically reproduced, the Lo-Boy Roadster revitalizes the hot rodding spirit that made the 1932 Ford a legend in America’s automotive history books. Designed for nostalgic originality, the Lo-Boy features a unique channeled look, which was quite popular in the early days of hot rodding.
The Lo-Boy body kit features a reinforced fiberglass 1932 Ford Roadster reproduction body, custom floor pan with transmission and driveshaft tunnel, passenger compartment bulkhead panel and trunk floor pan. It also includes functional doors with inner panels installed, as well as a deck lid with inner panel installed. Door jam structure braces, integral rear roll pan and rubber body mounting pads are also included.
The body sits upon our custom 106" whe
$1,999.99More Info1932 Lo-Boy Roadster Frame Assemblyx
Please view the product's page for more information