Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Street Rod Body, Interior & Gauges At Speedway Motors

Speedway Motors is the street rodder's source for body parts, gauges, and interior accessories! Find all the essential fiberglass body components, gauge sets by Stewart Warner and Auto Meter, and hot rod bomber seats, in our online catalog. While you are there, check out our full line of script emblems, rear view mirrors, windshields, fiberglass hoods and grilles. Complete your hot rod with sound proof insulation from Dynalite and Hushmat. Don't forget about Speedway's hot rod bomber seats for your traditional street rod, too!

"Street Rod, 1932 Ford" Page 1 of 4

  • 1932 Ford Roadster Fiberglass Dash Panel, Filled
    1932 Ford Roadster Fiberglass Dash Panel, Filled
    (Part #9003217)
    x
                

    Filled fiberglass dash panel for 1932 Ford Roadster. Features a glossy gelcoat finish that is ready for paint preparations.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • 1932 Ford Frame Center Boxing Plates
    1932 Ford Frame Center Boxing Plates
    (Part #91657056)
    x
                Our center boxing plate  pairs are left long to allow for inconsistencies in  original or new frame rails. Made of 10 gauge steel. Welding/fitting  required.
            
  • 1932 Ford Straight Front Spreader Bar, Chrome
    1932 Ford Straight Front Spreader Bar, Chrome
    (Part #91657018)
    x
                

    This spreader bar fits between the front frame rail horns on a 1932 Ford, lending strength and rigidity to the extreme ends of the frame. Chrome plated straight 1-1/2" O.D. tubular steel front cross bar measures 23-1/4" long.                    

  • 1932 Ford Hood Latch, Black
    $3.99
    Product Rating: 4.50 Stars
    1932 Ford Hood Latch, Black
    (Part #91132501)
    x
                

    This is a reproduction rams horn handle for 1932 Fords. The latch comes with the hood side catch and all necessary hardware as well.

    • Overall Height: 4"
    • Spring loaded
    • Reproduction for 1932 Fords 
    • Includes hood side catch and hardware
  • 1932 Ford Chopped Grille Shells
    1932 Ford Chopped Grille Shells
    (Part #97451532)
    x
                

    This 1932 Lo-Boy grille shell features a full hood mounting lip and has the filler cap/trim piece area smoothed over. Fiberglass construction. 4-1/2" chopped from stock height.

    • Height for radiator to fit through is 27-1/2"
    • Wide for radiator is 18-3/4"
    • Overall width = 8"
    • Depth of the grill from front = 1-3/4"
    • Depth of the grill from rear = 3-5/8" 

    This product is made to order-quantities may vary. Please allow three to four weeks lead time. 

  • 1932 Ford Windshield Slide Arms
    1932 Ford Windshield Slide Arms
    (Part #91045432)
    x
                Die cast, chrome plated windshield slide arms. Curved 1-piece style for 1932 Ford closed cars.
            
  • 1932 Ford Stainless Steel Bumper Bolts
    1932 Ford Stainless Steel Bumper Bolts
    (Part #91130004)
    x
                

    These nostalgic bumper bolts are designed from 1932 Ford style bumper bolts. They are steel with a stainless steel bolt head cover. Requires 2 bolts per bumper.

    • 1932 Ford style bumper bolts
    • Steel with a stainless steel bolt head cover
    • Requires 2 bolts per bumper
    • Includes lock washer and nut
    • Sold each
  • 1932 Ford Stainless Upper Windsheild Posts
    1932 Ford Stainless Upper Windsheild Posts
    (Part #91133204)
    x
                

    These windshield upper posts are stock reproduction and feature side mount mirror holes. They are designed for 1932 Fords and come in a polished stainless steel finish.

    • Upper posts
    • Stock reproduction
    • Side mount mirror holes
    • 1932 Ford passenger cars
    • Polished stainless steel finish
    • Each post includes a tapped 3/8"-24 fine thread hole for mirror mounting
  • 1932 5-Window Coupe Door Latch Assembly, RH, Original Style
    1932 5-Window Coupe Door Latch Assembly, RH, Original Style
    (Part #91119324)
    x
                The wait is over! EXACT copy of the original 1932 Ford Five window coupe passenger's door latch.
    • Original style latch WITH lock receiver
    • Precision stampings with original design mechanism.
    • Includes the inside door handle shaft remote (triangle plate) and remote rod
    • Key Lock Cylinders Not Included
    • RH & LH Sold separately
  • 1932 Ford Dash Panel
    $129.99
    Product Rating: 5.00 Stars
    1932 Ford Dash Panel
    (Part #91139530)
    x
                

    These beautiful billet aluminum dash panels are the perfect finishing touch for your interior. AutoMeter gauges. These are held into a factory dash or equivalent fiberglass dash with four tabs that attach to the back of the billet panel with 4 machine screws, which are included. This billet panel sits down into the recess lip of the factory or aftermarket dash. 

    This panel features three drilled and recessed holes that can be used for mini LED indicator lights. The inside diameter of the hole is 5/32" and the recess around the hole is nearly 1/4" wide for the light bezel around the bulb. The three holes would serve for high beam indicator, and left and right turn indicators. 

    Entire thickness of this panel is 3/8" with 1/4" going through the dash opening and the remaining 1/8" being the lip that sits into the factory style recessed lip of the dash. 

  • 1932 Ford Roadster and Phaeton Windshield Frame, Plain
    1932 Ford Roadster and Phaeton Windshield Frame, Plain
    (Part #55532001)
    x
                Mr. Roadster steel reproduction 1932 Ford open car (Roadster & Phaeton) windshield frames are available in plain steel or chrome plated steel. Includes windshield rubber.  
    • 10-3/4" height @ center
    • 13-1/2" height @ side
    • 41-3/4" width @ bottom
    • 43-3/4" width @ top

    Note: No glass included with our windshield frames.

  • 1932 Ford Stainless Steel Grille/Hood Trim
    1932 Ford Stainless Steel Grille/Hood Trim
    (Part #91132170)
    x
                

    This 1932 Ford stainless grille trim is made of polished stainless steel. It is the trim molding piece that goes between the grille and hood. This is the grille trim for a stock 32 ford grille shell. No other dimensions are available.

    • 1932 Ford
    • Polished stainless steel
    • Fits between grille and hood

     

  • 1932 Ford Fiberglass Hood, 5/8 Inch Longer
    1932 Ford Fiberglass Hood, 5/8 Inch Longer
    (Part #97693108)
    x
                One piece fiberglass hood with side flange. Top only, no sides. This is an outer skin only and will require fabrication and additional mounting hardware. You may be required to obtain original components for your application. Features a glossy gelcoat finish that is ready for paint preparations.  The hood may require some trimming to fit your body and to achieve your desired  panel gaps.      

    Ships UPS oversize.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • 1932 Ford Cowl Vent Handle
    $24.99
    1932 Ford Cowl Vent Handle
    (Part #91139331)
    x
                

    This chrome cowl vent handle is for a 1932 Ford and is made of solid brass. Plated with chrome. These handles open and close the vent atop the firewall to let air in.

    • Fits 1932 Ford
    • Made of solid brass
    • Plated with chrome
    • With mounting nut and washer

     

  • 1932 Ford V8 Headlight Bar Emblem, Chrome
    1932 Ford V8 Headlight Bar Emblem, Chrome
    (Part #91132103)
    x
                

    These reproduction V-8 headlight bar emblems come with a retaining screw to easily mount.  They feature a beautiful chrome finish and are the perfect finishing touch for your 1932 Ford.

    • Chrome finish
    • 1932 Ford headlight bar emblem
    • Mounts with included retaining screw
  • 1932 Ford Radiator Front Splash Apron, Steel, Stock Replacement
    1932 Ford Radiator Front Splash Apron, Steel, Stock Replacement
    (Part #91134101)
    x
                

    These 1932 Ford front splash aprons are stock height.  They are feature a die stamped steel, black powder coated finish.

    • 1932 Ford passenger cars
    • OEM replacement
    • Steel construction
    • Die Stamped, Black Powder Coated Aprons
  • Past Tech 1932 Ford DuVall   Windshield Frame
    Past Tech 1932 Ford DuVall Windshield Frame
    (Part #55532600)
    x
                

    The famous DuVall windshield is most unique windshield frame on the market today. The DuVall name is trademarked by Speedway Motors, so you know you are getting the real thing! Frame is constructed of solid, cast brass which can be polished, painted, or plated. A classic finishing touch to any 1932 Ford street rod.

    Includes 5 ft. of black piping which mounts between the body and the winshield frame. Glass not included.

    555-32600 Instructions (PDF)

  • 1932 Ford 5-Window Garnish Molding, RH, Chrome
    1932 Ford 5-Window Garnish Molding, RH, Chrome
    (Part #9113210)
    x
                
    • For 1932 Ford 5-window body
    • Heavy gauge stamped steel reproduction
    • Black finish
  • 1932 Ford Roadster Inside Door Handle Assembly
    1932 Ford Roadster Inside Door Handle Assembly
    (Part #91052800)
    x
                

    These inside door handle kits are designed for 1932 Ford Roadsters. They feature a beautifully chromed finish and are a complete set for 2 doors.

    • 1932 Ford Roadsters
    • Chromed finish
    • Complete set for 2 doors
  • 1932-36 Ford Windshield Swivel for Square Tubing Frame, Chrome
    1932-36 Ford Windshield Swivel for Square Tubing Frame, Chrome
    (Part #91133106)
    x
                

    These windshield frame cone swivels will work perfect for your 1932-1936 Fords with square tubing windshield frames.

    • 1932-36
    • Ford Square Tubing Windshield Frames
    • Mount these at pivot point of stanchion
    • Available in die cast chrome
    • Sold each

    Windshield Mount Guide (GIF)

  • 1932 Ford 5-Window Drip Rails
    $199.99
    1932 Ford 5-Window Drip Rails
    (Part #91119321)
    x
                
    • Exact reproduction of the original 1932 Ford 5-W coupe rain gutters
    • Made from the same heavy gauge steel
    • Ready to weld into place
    • Sold in pairs
  • 1932 Ford Filled Steel Dash
    $349.99
    1932 Ford Filled Steel Dash
    (Part #91119323)
    x
                
    • Steel reproduction dash
    • For '32 5-window coupe, sedan, fordoor & sedan delivery
    • Original elipse opening is filled
    • Original steering drop reinforcement included
  • 1932 Ford Highboy Fiberglass Rear Frame Covers, Speedway Body
    1932 Ford Highboy Fiberglass Rear Frame Covers, Speedway Body
    (Part #9003251)
    x
                

    1932 Ford "Highboy" fiberglass rear frame covers for Speedway fiberglass bodies. Features a glossy gelcoat finish that is ready for paint preparations.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery.

  • 1932 Ford Open Car Inside Rearview Mirror
    1932 Ford Open Car Inside Rearview Mirror
    (Part #751B17681SS)
    x
                Polished stainless steel interior rearview mirror for 1932 Ford Roadster and Phaeton open top cars. OEM design using superior stainless steel material.
            
  • 1932 Ford Stewart Warner Dash Panels
    1932 Ford Stewart Warner Dash Panels
    (Part #91139532)
    x
                

    These beautiful billet aluminum dash panels are the perfect finishing touch for your interior. These are held into a factory dash or equivalent fiberglass dash with four tabs that attach to the back of the billet panel with 4 machine screws, which are included. This billet panel sits down into the recessed lip of the factory or aftermarket dash. For use with Stewart Warner gauges.  Stewart Warner gauges only.

    This panel features three drilled and recessed holes that can be used for mini LED indicator lights. The inside diameter of the hole is 5/32" and the recess around the hole is nearly 1/4" wide for the light bezel around the bulb. The three holes would serve for high beam indicator, and left and right turn indicators. 

    Entire thickness of this panel is 3/8" with 1/4" going through the dash opening and the remaining 1/8" being the lip that sits into the factory style recessed lip of the dash. Measures approximately 4-3/4" high and 12" wide.

  • 1932 Ford Grille Insert, Rodders Style
    1932 Ford Grille Insert, Rodders Style
    (Part #91132162)
    x
                

    This 1932 Ford grille insert is made from beautifully polished stainless steel. "Rodder style" inserts do not have a crank hole.  This measures approx. 27-3/8" tall and 17" wide.  The grille is retained in the shell with screws going horizontal into the shell through the shell flange.

    • Polished stainless steel
    • Rodder style
    • Does not feature crank hole
    • 27-3/8" tall
    • 17" wide
  • 1932 Ford 3-Window Coupe Dash Panels
    1932 Ford 3-Window Coupe Dash Panels
    (Part #9003219)
    x
                1932 Ford dash panels for 3 window coupes. Fiberglass construction.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 
  • 1932 Ford 5-Window Coupe Windshield Frame
    1932 Ford 5-Window Coupe Windshield Frame
    (Part #55532401)
    x
                Mr. Roadster is the nation's largest builder and supplier of superior windshield frames. Speedways stock style replacement frame for 1932 Ford 5 window Coupe, Tudor, Ford or and Victoria (not 3 window). Includes upper hinge brackets and lower brackets for mounting the "slide" bars. Plain steel finish.  
    • 43" wide @ bottom
    • 44" wide @ top
    • 13-3/4" tall @ sides
    • 12-1/4" tall @ center 

    Note: No glass or windshield rubber included with our windshield frames.

  • Threaded Windshield Stud, 1928-36 Ford, 3/8 In X 3/8 In NF X 2 In
    Threaded Windshield Stud, 1928-36 Ford, 3/8 In X 3/8 In NF X 2 In
    (Part #91123102)
    x
                

    These threaded windshield studs feature a stop and include one stud and one cone nut. They are zinc plated for longevity. Fits 1928-31 Model A and 1932-36 Ford.

    • Steel material
    • (1) stud, (1) cone nut
    • Sold each

    Not included in our windshield kits.

  • 1932 Ford Straight Front Spreader Bar, Polished Stainless
    1932 Ford Straight Front Spreader Bar, Polished Stainless
    (Part #91657017)
    x
                

    This stainless steel spreader bar fits between the front frame rail horns on a 1932 Ford, lending strength and rigidity to the extreme ends of the frame. Straight 1-1/2" O.D. tubular polished stainless steel front cross bar measures 23-1/4" long.

  • 1932 Ford Roadster Fiberglass Dash Panel, Stock Style
    1932 Ford Roadster Fiberglass Dash Panel, Stock Style
    (Part #9003216)
    x
                

    Stock reproduction fiberglass dash panel for 1932 Ford Roadster. Features a glossy gelcoat finish that is ready for paint preparations.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • 1932 Ford Roadster and Phaeton Windshield Frame, Chrome
    1932 Ford Roadster and Phaeton Windshield Frame, Chrome
    (Part #55532002)
    x
                Mr. Roadster steel reproduction 1932 Ford open car (Roadster & Phaeton) windshield frames are available in plain steel or chrome plated steel. Includes windshield rubber.  
    • 10-3/4" height @ center
    • 13-1/2" height @ side
    • 41-3/4" width @ bottom
    • 43-3/4" width @ top

    Note: No glass included with our windshield frames.

  • 1932 Ford Open Car Stainless Windshield Post Kit
    1932 Ford Open Car Stainless Windshield Post Kit
    (Part #91133202)
    x
                

    These two-piece, stock height 1932 Ford Roadster and Phaeton windshield posts come with a left side mount mirror hole. Four standard chrome wingnuts included.

    • Two-piece
    • Stock Height
    • Posts with side mount mirror holes
    • Stainless
    • Four standard chrome wingnuts included
    • Two lower stainless stanchions with gaskets included
  • 1932-36 Ford Windshield Swivel, Square Tubing Frame, Stainless Steel
    1932-36 Ford Windshield Swivel, Square Tubing Frame, Stainless Steel
    (Part #91133107)
    x
                

    These windshield frame cone swivels will work perfect for your 1932-1936 Fords with square tubing windshield frames.

    • 1932-36
    • Ford Square Tubing Windshield Frames
    • Mount these at pivot point of stanchion
    • Available in die cast stainless steel
    • Sold each

    Windshield Mount Guide (GIF)

  • 1932 Ford 5-Window Coupe/Sedan Dash Panel
    1932 Ford 5-Window Coupe/Sedan Dash Panel
    (Part #9003218)
    x
                

    Filled 1932 Ford dash panel for 5 window coupe and sedan. Fiberglass construction.


    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • Steel Reproduction 1932 Ford Original Design Grille Shell
    Steel Reproduction 1932 Ford Original Design Grille Shell
    (Part #91132164)
    x
                
    • Original style steel reproduction has radiator cap opening and crank hole
    • Use with our 911-32161 original style reproduction grille insert
  • Speedway Signature Series All-Steel 1932 Roadster Kit Car
    Speedway Signature Series All-Steel 1932 Roadster Kit Car
    (Part #932001)
    x
                

    This custom '32 all steel, production-line roadster fills the gap between the do-it-yourself builder and the $150,000 custom built cars. What's more, is you maintain total control over the power and driveability by choosing your own engine and transmission. This 1932 roadster is a historical offering and another Bill Smith first.

     To learn more visit www.Speedway32.com

     

  • 1932 Ford Chrome Radiator Cap/Emblem Bezel
    1932 Ford Chrome Radiator Cap/Emblem Bezel
    (Part #91132102)
    x
                

    These radiator bezels are faithful reproductions of the chrome trim piece for the top center of an original style 1932 Ford grille shell.  They are designed to fit around the radiator cap/ornament and extend down the front of the grille shell to hold the blue oval Ford script emblem.

    • Chrome finish
    • Original reproductions
    • Fits 1932 Ford grille shell


  • 1932 Ford Front License Plate Brackets
    1932 Ford Front License Plate Brackets
    (Part #91130102)
    x
                

    These 1932 Ford front license plate mounting brackets are factory reproductions. This license tag bracket is available in black or polished stainless steel finishes.

    • Original models
    • 1932 Fords
    • Hardware included
    • Choose from black or polished stainless steel finish
  • 1932 5-Window Coupe Door Latch Assembly, LH, Original Style
    1932 5-Window Coupe Door Latch Assembly, LH, Original Style
    (Part #91119325)
    x
                The wait is over! EXACT copy of the original 1932 Ford Five window coupe driver's door latch.
    • Original style NON-LOCK latch
    • Precision stampings with original design mechanism.
    • Includes the inside door handle shaft remote (triangle plate) and remote rod
    • RH & LH Sold separately
Goto Previous PagePrevious Page
1 2 3 4