Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Speedway Motors wants to help "steer" you in the right direction with the highest quality steering components in the industry. Whether you just turn left or wheel it on the street, we got everything you need. From steering quickners and steering columns to power steering boxes and steering wheels, we've got all the parts needed to turn your wheels.

Featured Products
Flaming River FR1541 Reversed Corvair Steering Box
Flaming River FR1541 Reversed Corvair Steering Box
SKU-91032219
x
            

If you have tried to find a good used Corvair steering box, you know that the chances of finding a good one are slim to none. Don't bother! These brand new Corvair steering boxes have already been reversed. Designed for use on traditional steering cars and T-buckets, these boxes are constructed of modern high strength steel and needle bearings to ensure durability, which original boxes just can't offer. 

Painted black. Does NOT include pitman arm. Ratio is 20:1.  

Parallel Steering Set-Up Guide (GIF)

Sweet Mfg Steering U-Joint, 3/4 In Round to 3/4 In Round, Universal
Sweet Mfg Steering U-Joint, 3/4 In Round to 3/4 In Round, Universal
SKU-91032234
x
            

Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering u-joints available. Made by Sweet Manufacturing. These steering universal joints have 3/4 weld-on ends.

  • Full compliment bearings
  • Forged Vanadium steel yokes and u-joint
  • Highest quality for racing
  • Features needle bearing u-joints
  • U-Joint=3.875" L x 1.375" D

Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

 

Sweet Mfg Steering U-Joint, 3/4 Inch DD to 3/4 Inch DD, Universal
Sweet Mfg Steering U-Joint, 3/4 Inch DD to 3/4 Inch DD, Universal
SKU-91032298
x
            Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. This universal joint is 3.875 inches long and 1.375 inches in diameter.
  • Full compliment bearings
  • Forged Vanadium steel yokes and u-joint
  • Highest quality for racing
  • Features needle bearing u-joints
  • U-Joint=3.875" L x 1.375" D
Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

Plain Tie Rod/Drag Link Kit with 11/16 Tie Rod Ends
Plain Tie Rod/Drag Link Kit with 11/16 Tie Rod Ends
SKU-91632504
x
            

These tie rod or drag link kits are pre-cut and tapped lengths of 7⁄8" O.D. tubing available multiple lengths. Kits come complete with 11/16" traditional 7° tie rod ends and jam nuts. Tubing will be tapped with right-hand & left-hand threads for adjustability.

Select your length based on the center-to-center of the tie rod ends, which will also be the eye-to-eye distance between the steering arms (the acutal tube will be 3" shorter than length selected). At selected length, the link will be adjustable from 1/2" shorter to 3/4" longer.

Measuring Tie Rod or Drag Links (GIF)

Tapered Steering Arm Illustration (GIF) 

Note: Always use anti-seize to prevent galling the treads during final installation. 

 

Speedway Vega Cross Steering Box
Speedway Vega Cross Steering Box
SKU-91032204
x
            

The Vega Manual Steering Box is the foundation of a cross steering system, which is the most popular steering system for modern Hot Rods. These boxes are compact, durable and are getting more scarce every day. 

This unit bolts up to all normal Vega-type brackets and accepts Vega-spline u-joints, pitman arms and accessories. Durable cast iron and machined steel construction will give years of high-mileage service.

  • New castings and components
  • Faithful reproduction of size, shape and mounting hole locations
  • No core charge

Cross Steering Guide (GIF)

Note:  Vega steering box is not adjusted at the factory and therefore, it is necessary that the steering box be adjusted upon installation per the instructions as provided on the PDF instruction sheet.

910-32204 Instructions (PDF)

Mustang II Power and Manual Rack & Pinions
Mustang II Power and Manual Rack & Pinions
SKU-91034340
x
            

Product update: The rebuilt power rack # 910-34340-POW as described here and in our previous catalogs has been phased out and replaced with a new rack # 910-35341

Fits aftermarket Mustang II crossmembers. Available in manual or power steering. Mount bushings are included with the Power version, but mount bushings are NOT included in the Manual version.

MANUAL: New manual rack and pinion steering assembly for Pinto/Bobcat/Mustang II based front suspensions in street rods and kit cars. 9/16"-26 spline input shaft. 16" mount centers. 

POWER: Rebuilt power rack from 1982-88 T-bird. Also fits aftermarket Mustang II crossmembers. Bushings included. (Can be used with a Saginaw GM power steering pump without any additional valves or inline pressure regulators). Overall width is 45-1/8" with 15-1/2" mount centers. Must use offset bushings (910-34342) to mount to original Mustang II crossmembers. 3/4"-36 spline input shaft.

91034340 CPP Instructions (PDF)  

Speedway Vega Style Steering Box Combo, All New Assembly
Speedway Vega Style Steering Box Combo, All New Assembly
SKU-9163220
x
            

Speedway Motors makes it easy to bolt together a cross steering system with our Vega Steering Box Combo kit. Kit includes a Speedway Vega box, steel pitman arm, and a Ford Model T - 1934 frame mount. This steering box accepts a 5/8" 36-spline U-joint or coupler.

Kit includes:

  • Speedway Vega Steering Box
    • 20:1 steering ratio
    • 5 turns lock-to-lock
  • Steel Vega Pitman Steering Arm
    • Plain finish 
    • Non-offset design
    • Double-tapered "Ford" tie rod end hole (lets you attach the drag link on the top or on the bottom)
  • Vega Steering Box Mount
    • Fits Model T thru 1934 Ford frames
    • Weld-on design
Nostalgia Steel Steering Column
From: $89.99
Product Rating: 4.68 Stars
Nostalgia Steel Steering Column
SKU-91032311
x
            

We now have an affordable steel version of our famous hot rod steering column. The 1-3/4" black painted column still has a quick release steel hub that accepts the common 3-bolt Grant steering wheel pattern and uses common 3/4" DD u-joints. 15 gauge mild steel.

910-32311 Instructions (PDF)

"Steering" Page 1 of 25

  • Track-T Cross Steering Kit
    $499.99
    Product Rating: 5.00 Stars
    Track-T Cross Steering Kit
    SKU-97339227
    x
                

    The kit equips your Track-T with a cross steering system featuring a new Flaming River Vega steering box.  

    • Lower steering arms (flat plate, plain finish)
    • New Vega steering box
    • Pitman arm, modified
    • U-joint, splined for Vega shaft
    • Tie rod
    • Drag link
    • Spherical rod ends
    • All mounting hardware and spacers included
  • Ididit 1120320020 Tilt Wheel Steering Column, 32 Inch, Chrome
    Ididit 1120320020 Tilt Wheel Steering Column, 32 Inch, Chrome
    SKU-4461232C
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These non-shift versions feature a 2" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Chrome plated steel finish

    Measures 32" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1232C Instructions (PDF)

  • Sweet Mfg Steering U-Joint, 5/8-36 Spline 3/4 DD, Vega/Corvair/GM Rack
    Sweet Mfg Steering U-Joint, 5/8-36 Spline 3/4 DD, Vega/Corvair/GM Rack
    SKU-91032291
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints feature full compliment bearings and a 5/8"-36 spline.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 5/8"-36 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Ididit 1520690051 Plain Black Tilt Steering Column, 1969-72 Chevelle
    Ididit 1520690051 Plain Black Tilt Steering Column, 1969-72 Chevelle
    SKU-4466972
    x
                The hot rod experts at Ididit put a lot of time and  research into these retrofit steering columns, ensuring a perfect fit  for your specific vehicle. These Ididit retrofit floor shift steering  columns are designed to fit in the factory location and, in many cases,  will put the steering wheel back in its original location. They include  self-canceling turn signals, 4-way flashers and knobs and handles. The  columns are designed for use with aftermarket steering wheels. 
    • For '69-'72 Chevelle
    • Bolt-In
    • Black powdercoated
    • 8 position tilt
    • With key
    • Self canceling turn signals
    • 4 way flasher
    • Knob & Levers
    • 3-7/8 wiring plug
    • 1" - 48 lower shaft
    • Uses original under dash mount and floor mount along with the factory wiring and plug
    • Made in the USA
  • Unisteer 8001090-01 68-70 Mustang Manual Rack & Pinion Conversion Kit
    Unisteer 8001090-01 68-70 Mustang Manual Rack & Pinion Conversion Kit
    SKU-91032307
    x
                

    This rack & pinion conversion kit will finally give your classic 1968-70 Mustang the ease of steering and road feel modern cars have. Each kit is engineered to bolt in without sacrificing steering geometry or safety. The custom steering gear is engineered to match the stock suspension, and has NO BUMP STEER. Installation is extremely simple, since the unit is a true bolt-on.

    Each kit includes everything needed to do a complete installation on a Mustang with the original column.

  • Ididit 2402500040 Steering Column Ball Swivel Lower Mount, 2-1/4 Inch
    Ididit 2402500040 Steering Column Ball Swivel Lower Mount, 2-1/4 Inch
    SKU-4464250
    x
                

    Mounting your steering column to the firewall or floor can be a real challenge. Ididit's billet aluminum ball swivel style mounts make this task much easier.

    Note: This mount may require slight modification to the I.D. of the ball or O.D. of the column end due to variation between manufacturers. It is not for chrome columns.

    446-4250 Instructions (PDF)

  • 14mm to Male AN6 Banjo Bolt Fitting for Power Steering Pump
    14mm to Male AN6 Banjo Bolt Fitting for Power Steering Pump
    SKU-6174831
    x
                

    These power steering adapter fittings are designed to simplify the hose connection on your power steering lines. They are made from quality material and are designed to withstand even the harshest environments. The adapter fittings are the perfect solution for adding new lines or for those tight-fit areas where normal, straight fittings won't fit.

    Banjo Bolt Fitting for Power Steering Pump

    • 14mm to Male AN6 
    • Zinc-plated steel assembly
    • For the pressure connection (outlet) to the pump.
    • 90 Degree
    • Swivel
    • Male Threads
  • Low Flow Power Steering Pump for Mustang II & Ford
    Low Flow Power Steering Pump for Mustang II & Ford
    SKU-91032924
    x
                

    These brand new aluminum remote reservoir power steering pumps are available in low flow for Mustang II power rack & pinion or Ford power steering. Same as GM Type II TC pumps. 

    The flow of this pump is two gallons per minute and is rated at 1,500 PSI.

    Use pulley part #910-32928 sold separately.

     

  • AFCO Pro Grip Steering Wheel, 15 Inch, Flat
    AFCO Pro Grip Steering Wheel, 15 Inch, Flat
    SKU-10630376
    x
                AFCO 15" steering wheels feature three spokes and have both 1/4" and 5/16" bolt mounting holes. The finger nubs are spaced 1" apart for a secure grip. Pro-Grip wheels have a BIG 1.25" rim. 
            
  • Speedway Classic 12 Inch Black Steering Wheel w/ Holes
    Speedway Classic 12 Inch Black Steering Wheel w/ Holes
    SKU-91032749
    x
                

    Smooth black cushion with chrome spokes. Has the common 3 bolt pattern mount.  Wheels feature rubber steering wheel grip.  Chrome center cap is included.

    • Smooth black cushion
    • 3 bolt pattern mount
    • Steel
    • Chrome cap included

    Note: These steering wheels require addtional purchase of a horn button retainer, not included with steering wheel.  We offer our corresponding retainer (41010112) and various adapter kits for your specific application. 

     

  • AFCO 30307 U-Joint, 9/16 Inch-26 Spline
    AFCO 30307 U-Joint, 9/16 Inch-26 Spline
    SKU-10630307
    x
                

    These splined U-joints feature a set screw & lock-nut.  Maximum operation angle of this steering universal joint is 32°.

    • 9/16"-26 spline x 3/4" round weld-on
    • Greased needle bearing with Teflon seal
    • Forged 1045 steel
    • Broached spline for better fit
    • Heat-treated forgings
    • 1-1/8" O.D. x 3-3/4" length

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

     

  • Sweet Mfg Chrome U-Joint, 3/4-30 Spline to 3/4 DD, Small GM P/S '78-Up
    Sweet Mfg Chrome U-Joint, 3/4-30 Spline to 3/4 DD, Small GM P/S '78-Up
    SKU-9106151
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints feature a double D end to make use of the double D shaft.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 3/4"-30 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Steering Shaft Assembly, Model T Keyed, 26 Inch Shaft
    Steering Shaft Assembly, Model T Keyed, 26 Inch Shaft
    SKU-91032250
    x
                

    This steering shaft is for Model "T"s. Adapts early T style steering wheels to your existing steering shaft. This steering shaft is available in short  ( 3" long, bored fit onto a 3/4" diameter shaft); or long (26" overall, 3/4" diameter). Weld-on.

     

     

  • Goodridge SP670-11 18 In Stainless Braided Steering Gear Pressure Line
    Goodridge SP670-11 18 In Stainless Braided Steering Gear Pressure Line
    SKU-9401897
    x
                Lightweight stainless steel braided high flow line with 90° -6 AN steel fittings. Pressure tested to 9000 psi.
            
  • KSE Racing Products KSD1009 Block Mount Hose Adapter
    KSE Racing Products KSD1009 Block Mount Hose Adapter
    SKU-91015554
    x
                

    Hose mounting adapter for small block Chevy water pump block ports.

  • Pin-Style Quick Release Steel Steering Wheel Hub, 5/8 Inch Steel Shaft
    Pin-Style Quick Release Steel Steering Wheel Hub, 5/8 Inch Steel Shaft
    SKU-91032857
    x
                The pin-style quick-release steel hub is a tight 19 spline steel adaptor that welds to your steering shaft.  Steel hub is retained by a steel quick release pin.  Available for 3/4 or 5/8" shaft.
            
  • 1955-57 Chevy Power Steering Centerlink Conversion
    1955-57 Chevy Power Steering Centerlink Conversion
    SKU-91032520
    x
                So your car has the original power steering which is a valve on the end of the centerlink. Problem is they never did work right and made switching to a newer steering box a pain. To fix your problem you just unscrew the original power steering valve off the centerlink, screw this gizmo back on and now you can add a new 605 style power steering box and still use your original power steering centerlink. Neat huh.
            
  • Ford Upper Steering Arm, Plain, 7-3/4 Inch, Tapered
    Ford Upper Steering Arm, Plain, 7-3/4 Inch, Tapered
    SKU-91632011
    x
                Flame cut steel upper steering arm for '37-'48 Ford spindles (with 3-3/8" mount centers). This design is available in 6-1/4" or 7-3/4" lengths. The longer 7-3/4" arms permit a tighter left turn when using large diameter front tires or front wheels with a deep reverse, and it also slows the steering rate for greater control. Tapered end accepts 11/16" tie rod ends. 

    NOTE: Upper steering arms allow the attachment of a drag link to the LH (driver's side) spindle. The arms attach with bolts through the upper 2 backing-plate-mounting holes on spindle.

    Steering Arm Ends Guide (GIF)

    Parallel Steering Set-Up Guide (GIF)

  • KRC 63201100 Alum Power Steering Pump w/ Aluminum Tank, V-Belt Pulley
    KRC 63201100 Alum Power Steering Pump w/ Aluminum Tank, V-Belt Pulley
    SKU-466632011
    x
                
    • Attached Billet aluminum reservoir
    • V-belt pulley
    • Reservoir available separately, but for KRC pump only
    • Has AN 6 inlet and outlet
  • Stainless Tie Rod/Drag Link Kit with Plain 11/16 Tie Rod Ends
    Stainless Tie Rod/Drag Link Kit with Plain 11/16 Tie Rod Ends
    SKU-91632506
    x
                

     

    These tie rod or drag link kits are pre-cut and tapped lengths of 7⁄8" O.D. tubing available multiple lengths. Kits come complete with 11/16" traditional 7° tie rod ends and jam nuts. Tubing will be tapped with right-hand & left-hand threads for adjustability.

    Select your length based on the center-to-center of the tie rod ends, which will also be the eye-to-eye distance between the steering arms (the acutal tube will be 3" shorter than length selected). At selected length, the link will be adjustable from 1/2" shorter to 3/4" longer.

    Measuring Tie Rod or Drag Links (GIF)

    Tapered Steering Arm Illustration (GIF) 

    Note: Always use anti-seize to prevent galling the treads during final installation. 

     

  • AFCO 10457 Chromoly Heim Rod End, 5/8-18 LH Male
    AFCO 10457 Chromoly Heim Rod End, 5/8-18 LH Male
    SKU-10610457
    x
                
    • Chromoly body - 2 piece design
    • Designed for heavy duty applications
    • Rough conditions steering/offroad
    • Ball - 52100 steel hard chrome plated
    • Race - N/A
    • Body - 4130 chromoly
    • Max Static Load - 18,000 lbs.
  • Gates 350110 1967-1970 Mustang Power Steering Return Hose Fitting
    Gates 350110 1967-1970 Mustang Power Steering Return Hose Fitting
    SKU-395350110
    x
                

    These power steering return hose fittings from Gates are furnished separately and work on 1967-70 Mustang applications.  They feature inverted flare threads and a zinc-dichromate plated finish to resist corrosion.

    • Male inverted flare end
    • End (1) Diameter: 3/8"
    • Works with standard 3/8" hose
    • Zinc-dichromate plated finish to resist corrosion

    *Double check "Application" tab to make sure this item will work with your correct engine.

    1964-70 Mustang Power Steering Hose Application Guide (GIF)

  • AFCO Aluminum Tube, 20 Inch Long, 1 Inch O.D. (3/4) Inch
    AFCO Aluminum Tube, 20 Inch Long, 1 Inch O.D. (3/4) Inch
    SKU-10620048
    x
                

    Insist on 6061-T6 drawn tubing for strength, durability, and precise fit.  Extruded tubing looks similar, but it is not as strong or durable.  Extruded parts are prone to failure, while drawn parts keep performing.  Drawn material offers the same strength as hex without the additional weight.

    •  2-1/4” of tapped thread on each end. 

    Tech Tip:  Tube length will need to be 4" shorter than eye to eye working length.

  • KRC 50010100 Cast Iron Power Steering Pump with V-Belt Pulley
    KRC 50010100 Cast Iron Power Steering Pump with V-Belt Pulley
    SKU-46650110
    x
                

    KRC now has its power steering pumps available with a billet aluminum reservoir attached, rather than remote.

    Cast Iron Pump Tech (PDF)

    Cast Iron Pump Installation Instructions (PDF)

    New Pump Tips (PDF)

    V-Belt pulley offset (PDF) 

  • Chrome Plated Billet Wings Style Steering Wheel
    Chrome Plated Billet Wings Style Steering Wheel
    SKU-9105605
    x
                

    This stylish 14 inch steering wheel features a half wrap, leather grip design, 2" dish, and chrome plated billet aluminum spokes. Wheel has a 9-bolt mounting pattern requiring a hub adapter to install on your GM style column. Hub adapter 910-5602 and horn button 910-5600 sold separately.

  • 1973-77 Chevelle A-Body Inner Tie Rod
    1973-77 Chevelle A-Body Inner Tie Rod
    SKU-91032213
    x
                

    We stock those hard-to-find 1973-77 GM A-Body tie rods and adjustment sleeves.

    • Inner Tie Rod: LH threads

    1973-77 GM A-Body  

    • Buick (Century, Regal)
    • Chevy (Chevelle, Malibu, El Camino)
    • GMC (Sprint)
    • Oldsmobile (Cutlass, 442, Hurst Olds)
    • Pontiac (Grand Prix, LeMans)

     

  • Gates 353120 1964-1966 Mustang Power Steering Cylinder Hose
    Gates 353120 1964-1966 Mustang Power Steering Cylinder Hose
    SKU-395353120
    x
                

    These power steering cylinder hoses from Gates are authentic reproductions of the originals. They work on 1964-66 Mustang applications and include fittings already assembled.

    • Male inverted flare ends
    • End diameter: .3125"
    • Length: 9-3/4"

    Note: Two of these hoses are required for Mustang applications.

    1964-70 Mustang Power Steering Hose Application Guide (GIF)

  • 1955-57 Chevy Car Outer Tie Rod End
    1955-57 Chevy Car Outer Tie Rod End
    SKU-91032362
    x
                

    We stock these hard to find replacement tie rods that are a must when rebuilding your classic vehicle.  They will give your Tri-5 overall better handling and a positive feel while cruising the strip.  These outer tie rod ends feature 9/16" left hand thread. The inner tie rod ends are right hand thread and the adjuster sleeve makes the adjustment for toe in by rotating clockwise or counter clockwise.

    • Meets or exceeds factory OEM specifications
    • Overall better handling and a positive feel
    • 9/16" Left Hand Threads
    • Overall Length: 4 Inch (including 2-1/4" of threads)
  • 16 Piece Spacer Kit, 3/8 Inch
    16 Piece Spacer Kit, 3/8 Inch
    SKU-9601090
    x
                Machined aluminum spacer offers clearance for rod ends.  Kit includes 8-1/4", 4-1/2", 2-3/4", and 2-1". 
            
  • Inner Tie Rod Extention Kit - Speedway Mustang II Manual Rack
    Inner Tie Rod Extention Kit - Speedway Mustang II Manual Rack
    SKU-91034346
    x
                

    Inner tie rod extensions for Speedway manual racks. Includes boots and bands.

    910-34346 Instructions (pdf)

  • Power Steering/Coolant Tank Mount
    Power Steering/Coolant Tank Mount
    SKU-91032880
    x
                

    Use this handy 3" tall aluminum bracket to mount your power steering reservoir tank or your coolant overflow expansion tank. Can be welded to the tank, strapped to the tank with hose clamps, or custom-mounted to suit your needs.

    Tank NOT included. 

  • Billet Specialties 30425 Billet Vin Tec Steering Wheel
    Billet Specialties 30425 Billet Vin Tec Steering Wheel
    SKU-91013242
    x
                

    Billet Specialties is the worldwide leader in billet steering wheels. Their relentless attention to detail is apparent both front and back on these works of automotive art. The backside of each wheel features milled finger notches for an ultra-comfortable grip.

    Wheel ONLY - half-wrap trim, horn button, and steering column adapter available separately. Has a 14" diameter with a 2" dish.

  • Ididit 1120300010 Tilt Wheel Steering Column, 30 Inch, Plain
    Ididit 1120300010 Tilt Wheel Steering Column, 30 Inch, Plain
    SKU-4461230D
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These non-shift versions feature a 2" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Plain steel finish

    Measures 30" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1230D Instructions (PDF)

  • Grant 3249 3-Bolt Steering Wheel Adapter, Ford Applications
    Grant 3249 3-Bolt Steering Wheel Adapter, Ford Applications
    SKU-4103249
    x
                

    This is the standard Grant steering wheel installation kit for Ford steering columns. These kits may be used to install all Classic Series, Challenger Series or Signature Series steering wheels. Each kit contains complete step-by-step instructions, a die cast hub, Grade 5 hardware and matte black trim pieces.

    Adapter Application Chart (GIF)

    410-3249 Instructions (PDF)

  • 55 Degree Steering Column Mount for T-Bucket Kit
    55 Degree Steering Column Mount for T-Bucket Kit
    SKU-7154255
    x
                
    These mounts are the economical mounting solution for T-bucket steering columns.  They are designed to be used in conjunction with our 1-3/4" diameter stainless or plain steel hot rod steering columns.
    • Mount puts the steering column at a 55 degree angle to the firewall
    • Fits all of our deluxe "T" bodies with the floor / firewall installed
    • Designed to be used with a 1-3/4" diameter steering column
  • AFCO 37398 Power Steering Pump Replacement Reservoir/Vent Cap/Bracket
    AFCO 37398 Power Steering Pump Replacement Reservoir/Vent Cap/Bracket
    SKU-10637398
    x
                

    Aluminum Power Steering Pump Replacement Reservoir/Vented Cap/Bracket

    • 100% pressure tested
    • Vented cap
    • Popular racing design
  • Power Steering Pump Combo, -10 AN Fittings
    Power Steering Pump Combo, -10 AN Fittings
    SKU-91032913
    x
                

    Power steering pump combos include:

    • Sweet Mfg. cast iron power steering pump
    • Block mount bracket with hardware
    • Standard weight aluminum reservoir tank
    • Tank mounting bracket

    Reservior bracket can be welded to the tank, strapped to the tank with hose clamps, or custom-mounted to suit your needs.

    910-32913 Instructions (PDF)

  • AFCO 37130 TC Style Power Steering Pump Adapter Fitting, Outlet
    AFCO 37130 TC Style Power Steering Pump Adapter Fitting, Outlet
    SKU-10637130
    x
                

    AFCO steel adapter pressure outlet fitting for TC style power steering pumps.

  • Model T Steering Wheel Nut, Brass
    Model T Steering Wheel Nut, Brass
    SKU-91114601
    x
                

    For Model "T"s. Adapts early T style mahogany steering wheels to your existing shaft.

  • KRC 63202000 Pro Series Alum Power Steering Pump w/ Serpentine Pulley
    KRC 63202000 Pro Series Alum Power Steering Pump w/ Serpentine Pulley
    SKU-466632020
    x
                

    The KRC Pro Series power steering pump is the first pump specifically designed and engineered for racing without any production car components, is the result of 2 years of research and development that included input from industry leaders like Tony Woodward. The pump marries KRC signature components such as tunable flow valves, spline drive bolt-on pulleys, double bolt patterns, and ball and roller shaft bearings with new and improved pump technologies such as a micro-honed piston bore for quick and smooth response and ported low turbulence internal passages, and a unique pump design to deliver the most versatile, durable, and efficient pump ever manufactured.

    • Designed for the rigors of racing
    • Same pulley offset and mounting pattern as GM Saginaw style pumps
    • KRC calibrated, tunable flow curve
    • KRC spline-drive bolt-on pulleys
    • 9,000 rpm maximum pump speed
    • 1600 psi maximum pressure relief
    • -10 AN inlet and -6 AN outlet
    • Includes a 4.2" serpentine pulley
Goto Previous PagePrevious Page
1 2 3 4 5 ... 25