Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Stallard Chassis At Speedway Motors

Stallard Chassis has a long and storied history in the world of fabrication and chassis technology for Mini Sprints and Midget Sprint Cars. Countless feature wins, track championships, and national championships fill the landscape of Stallard Chassis accomplishments. All Stallard Chassis are manufactured in Lincoln, Nebraska and are built on Mark Stallard's fixtures and use all of Stallard's components and fiberglass bodies.

Featured Products
Stallard Chassis Mini-Sprint 52 Inch Splined Rear Axle
Stallard Chassis Mini-Sprint 52 Inch Splined Rear Axle
x
            

These 27-spline axles have RH thread on one end and LH on the other. Use with our bearing sleeves.

Note:  This axle will not work if using a panhard bar and mounting the brake on the right side of the axle as there are not enough splines. 

Stallard Chassis BC103-120-10 Forged Aluminum Micro Spindle
Stallard Chassis BC103-120-10 Forged Aluminum Micro Spindle
x
            

Reversible for right or left side use, these black anodized spindles are 7075 aluminum for superior strength and contain bronze 5/8” king pin bushings. Features a 1” aluminum snout and 5/16” steering arm mount holes on a 2.125” spread. Factory replacement on Hyper, Stallard, PMP and RTS chassis.

Spindle ONLY - hardware sold separately.

Mini-Sprint Axle Spacers
From: $5.99
Mini-Sprint Axle Spacers
x
            CNC 6061 aluminum double flange spacers with radius cut to reduce rotating weight. Fit 1 ¾” axles. Available sizes: .150”, ¼”, ½”, ¾”, 1”, 1.180”, 1 ½”, 2”, 2 ¼”, 2 ½”, 2 ¾”, 3”, 3 ¼”, 3 ½”, 3 ¾”, 4”, 5”. 
        
Stallard Chassis 250-671R Micro Sprint 5 In Right Rear Bearing Carrier
Stallard Chassis 250-671R Micro Sprint 5 In Right Rear Bearing Carrier
x
            
  • Right bearing carrier
  • Allows for torsion arm and radius rod to be mounted on either side

"Stallard Chassis" Page 1 of 3

  • Stallard Chassis BC250-550 Splined Axle Spacer, 3/4 Inch
    Stallard Chassis BC250-550 Splined Axle Spacer, 3/4 Inch
    x
                This 27-spline aluminum axle spacer has a 3/4 inch width.
            
  • Stallard 999-005 Rearend Alignment Tool for Micro Sprint Racing
    Stallard 999-005 Rearend Alignment Tool for Micro Sprint Racing
    x
                These centering tools allow you to install a rear  end in a  chassis without being hooked up to a motor plate.  This is  helpful when  setting up an extra chassis before heading to the track.  This tool is specifically made for all types of micro chassis! 
    • Round hole is for the rear axle
    • 1 3/4" notch is for the front axle
    • Small hole is for the round rods
    Rear squaring:
    1. Set left and right torsion arm lengths with fixture
    2. Hook torsion arms to torsion bars without stops
    3. Hook torsion arms to bearing carriers
    4. Adjust radius rods to proper lengths and hook to bearing carriers
    5. Now unhook torsion arms
    6. With a protractor rotate bearing carriers 57 degrees
    7. Re-attach torsion arms (arms may need to be lengthened or shortened)
  • Stallard Chassis BC230-246 Micro Sprint Throttle Cable Adapter
    Stallard Chassis BC230-246 Micro Sprint Throttle Cable Adapter
    x
                

    These Stallard collars are designed to be used as a throttle rod stop or rod adapter. They have a black oxide finish and feature a set screw to secure it.

    Stallard Mico Sprint Throttle Cable Adapter

    • 1/4" I.D.
    • .68" O.D.
    • Steel
    • Black oxide
    • Throttle Cable throttle rod adapter
    • Fits Stallard cars only

  • Stallard Chassis BC250-540 Sprocket Carrier and Rotor Hub
    Stallard Chassis BC250-540 Sprocket Carrier and Rotor Hub
    x
                
    • Fits any 1.75” x 27 spline rear axle
    • Use the same hub for drive sprocket or brake rotor
    • 5.25” bolt circle with six threaded ¼ x 20 mounting holes
  • Mini-Sprint Axle Spacers
    From: $5.99
    Mini-Sprint Axle Spacers
    x
                CNC 6061 aluminum double flange spacers with radius cut to reduce rotating weight. Fit 1 ¾” axles. Available sizes: .150”, ¼”, ½”, ¾”, 1”, 1.180”, 1 ½”, 2”, 2 ¼”, 2 ½”, 2 ¾”, 3”, 3 ¼”, 3 ½”, 3 ¾”, 4”, 5”. 
            
  • Stallard Chassis Micro Sprint Chain Guide Assembly Kit
    Stallard Chassis Micro Sprint Chain Guide Assembly Kit
    x
                These chain guide assembly kits work with Micro Sprint applications and are designed to fit 2009-later Stallard chassis.  They feature aluminum construction with a black anodized finish and come complete with block plate, mounting plate, and chain guide block.
    • Complete assembly includes block plate, mounting plate and chain guide block
    • Aluminum construction, black anodize finish
    • Fits 2009-later Stallard chassis
  • Stallard Forged Aluminum Micro Sprint Steering Arm
    Stallard Forged Aluminum Micro Sprint Steering Arm
    x
                These steering arms are lightweight and constructed of strong aluminum for both sprint cars &  midgets. Designed for right hand side applications.
    • Works on all popular micro sprint chassis
    • Rigid and lightweight
    • Black anodize
  • Stallard Chassis BC6401-504 Micro Sprint Left Rear Steel Torsion Arm
    Stallard Chassis BC6401-504 Micro Sprint Left Rear Steel Torsion Arm
    x
                
    • 1-1/8" x .120 4130 steel
    • Less flex than aluminum arms for better bite
  • Stallard Chassis Micro Sprint Alum Turnbuckle, 7/16 Inch Heims
    Stallard Chassis Micro Sprint Alum Turnbuckle, 7/16 Inch Heims
    x
                These turnbuckles from Stallard are designed for use on Micro Sprint racing applications.  They come in a natural aluminum finish and feature 7/16" rod end heims for easy adjustment. Choose your desired length.
    • Available in 3.25", 3.75", 4.24", 4.75", 5.25" and 6" lengths
    • 7/16" rod end heims
  • Stallard Chassis BC6401-503 Micro Sprint Right Rear Steel Torsion Arm
    Stallard Chassis BC6401-503 Micro Sprint Right Rear Steel Torsion Arm
    x
                
    • 5" offset
    • Less flex than aluminum arms for better bit
  • Stallard Chassis BC6102-108-T Micro Sprint Front Axle
    Stallard Chassis BC6102-108-T Micro Sprint Front Axle
    x
                

    This Stallard micro sprint torsion bar front axle is factory-built by Stallard. 

    • 4130 steel construction
    • Axle diameter: 1-3/4"
    • Axle wall thickness: .095"
    • Length: 40" center of king pin boss to center of king pin boss
    • Axle king pin bosses are reamed & honed for perfect fit; no need for additional reaming 
    • Boss: 2" in length
    • Left Front: 10 degree
    • Right Front: 10 degree
    • Threaded 3/8" stud panhard mount 
    • Threaded shock mounts
    • Fits Stallard, Triple X, PMP and other popular chassis brands
  • Stallard Chassis Micro Sprint Complete Jacobs Ladder Assembly Kit
    Stallard Chassis Micro Sprint Complete Jacobs Ladder Assembly Kit
    x
                These jacobs ladder kits come complete for your Micro Sprint Stallard chassis.  They feature black anodized flat aluminum construction with 5" straps and a two-hole mounting tab.
    • 5" assembly, includes paddle tab, paddle, and straps
    • Fits 2009 to present Stallard chassis
  • Stallard Micro/Mini Sprint Engine Nerf Bar
    Stallard Micro/Mini Sprint Engine Nerf Bar
    x
                These polished stainless nerf bars are designed to fit Eagle and Stallard style chassis.  They work to protect the engine of your Micro/Mini/600 sprint. 
    • Engine bar
    • Polished stainless
  • Stallard Chassis Micro Sprint Wheel Hub Dust Cap O-Ring
    Stallard Chassis Micro Sprint Wheel Hub Dust Cap O-Ring
    x
                

    These quality O-rings from Stallard Chassis are designed for use with our dust cover for 2.020" diameter hubs.

    • Seals out dirt and dust from entering hub bearings
    • Durable rubber material construction
    • For use with 2.020" diameter front hubs
  • Stallard Micro/Mini Sprint Fiberglass In-Rail Chassis Hood
    Stallard Micro/Mini Sprint Fiberglass In-Rail Chassis Hood
    x
                
    These fiberglass racing hoods are specifically designed for use with 2014 Stallard in-rail chassis and come available in black or white gel-coat finish.
    • Micro/Mini Sprint racing cowl
    • Available in black or white gel-coat finish
    • Quality fiberglass construction
    • For use with Stallard in-rail chassis cars
  • Stallard Micro Sprint 1 Inch Spindle Pinch Nut
    Stallard Micro Sprint 1 Inch Spindle Pinch Nut
    x
                These spindle pinch nuts come threaded for use with Micro sprint spindles.  They will work with all popular 1" spindles.
    • Spindle 1" pinch nut
    • used to hold front hubs on Micro's
  • Stallard Chassis BC6200-003 Micro Sprint Rack And Pinion
    Stallard Chassis BC6200-003 Micro Sprint Rack And Pinion
    x
                
    • Fits Stallard and other cars
    • Heat treated gears
    • Ball bearings for pinion gear
    • 29 tooth x .570 spline
  • Stallard 6500-1000B Mini Sprint Car 1000cc Fiberglass Rear Hood Piece
    Stallard 6500-1000B Mini Sprint Car 1000cc Fiberglass Rear Hood Piece
    x
                

    Speedway Motors offers a complete selection of Mini Sprint Car fiberglass body pieces.  These Micro/Mini Sprint hood pieces are Stallard factory built body components, available in quality fiberglass construction in either a white or black gel coat finish.

    • 26" long x 16" tall x 24" wide
    • For 1000cc mini sprint
    • Stallard factory built component
    • Fiberglass construction
    • Choose white or black gel coat finish

     

  • Stallard Chassis Micro Sprint Replacement Chain Guide Block
    Stallard Chassis Micro Sprint Replacement Chain Guide Block
    x
                

    Direct replacement for chain guide block in complete chain guide assembly (960-6216). These durable plastic block mounts your birdcage or bearing carrier to provide a low resistance guide for any chain.  Works with Micro Sprint applications and are designed to fit 2009-later Stallard chassis.

    • Durable plastic construction
    • Fits 2009-later Stallard chassis
    • Replacement for our kit (960-6216)

     

  • Mini Sprint Axle Nut for Splined Axle
    Mini Sprint Axle Nut for Splined Axle
    x
                These have a 2" hex and your choice of LH or RH thread for Mini Sprint Axles only. 
            
  • Stallard Micro/Mini Sprint Rear Bumper
    Stallard Micro/Mini Sprint Rear Bumper
    x
                

    These polished stainless bumpers are designed to fit Eagle and Stallard style chassis.  They work on the rear of your Micro/Mini/600 sprint.

    • Rear bumper
    • Polished stainless
    • 3/4" tubing diameter
    • 23.38" overall width
  • Stallard Chassis Micro Sprint Right Rear Offset Steel Torsion Arm
    Stallard Chassis Micro Sprint Right Rear Offset Steel Torsion Arm
    x
                

    These steel torsion arms for Stallard and Eagle chassis Micro Sprint cars feature a 4.25" offset with a 7/8" spline and fit the right rear side.

    • Quality steel construction
    • Less flex than aluminum arms for better fit
    • 4-1/4" offset
    • 7/8" spline
    • Right Rear
  • Stallard Chassis Micro Sprint Upper Steering Support Bracket
    Stallard Chassis Micro Sprint Upper Steering Support Bracket
    x
                These upper steering support brackets are designed for use with Sprint  racing Stallard Chassis cars.  They feature 5/16" mounting holes with steel construction and brass bushings.
    • For Stallard Chassis cars
    • 1" shaft size
    • 5/16" mounting holes
    • Steel construction with brass bushings
    • Weighs just .75 lbs.
  • Stallard Chassis Micro Sprint Brake Bellcrank Support Bracket
    Stallard Chassis Micro Sprint Brake Bellcrank Support Bracket
    x
                These brake bellcrank brackets are designed for use Micro Sprint racing  applications. They feature an anodized black finish with machined aluminum  construction for durability. 
    • Material Type: Aluminum
    • Finish: Anodized
    • Sold in Quantity: Each
    • For 5/8" diameter upper steering shafts
  • Stallard Chassis 6230-200-A Micro Sprint Throttle Pedal Assembly
    Stallard Chassis 6230-200-A Micro Sprint Throttle Pedal Assembly
    x
                Stallard Chassis and Components offers these racing gas pedal assemblies  which are universal for firewall applications. This lightweight  accelerator pedal is just            the ticket for mini sprints,  midgets and sprint cars. 
    • This kit allows the driver to give longer pedal throw for better throttle  control
    • Kit contains all components necessary to mount this assembly in your 2009-present Stallard chassis
    • This assembly does not fit other chassis
  • Stallard Chassis Mini-Sprint 52 Inch Splined Rear Axle
    Stallard Chassis Mini-Sprint 52 Inch Splined Rear Axle
    x
                

    These 27-spline axles have RH thread on one end and LH on the other. Use with our bearing sleeves.

    Note:  This axle will not work if using a panhard bar and mounting the brake on the right side of the axle as there are not enough splines. 

  • Stallard Chassis BC103-155-A Micro Sprint King Pin Set
    Stallard Chassis BC103-155-A Micro Sprint King Pin Set
    x
                
    • Includes two kingpins, grease fittings, thrust bearings, and set screws
    • Heat treated 4340 steel ground finish
    • Best king pin on the market
  • Stallard Micro Sprint 2003-05 Yamaha R6 Motor Mount Slider Kit
    Stallard Micro Sprint 2003-05 Yamaha R6 Motor Mount Slider Kit
    x
                

    This kit includes machined aluminum plates with a black anodize finish, and everything else needed to easily adjust the chain and motor. Designed to work with 2005 to present Stallard chassis.

    • Includes everything needed to easily adjust the chain and motor
    • Fits 2005 to present Stallard chassis
    • 2003-05 Yamaha R6 applications

     

     

  • Stallard Micro Sprint Aluminum Battery Plate
    Stallard Micro Sprint Aluminum Battery Plate
    x
                

    These battery mount plates are designed to work with 2009-present Stallard chassis. They come in a convenient size and are constructed of quality aluminum.

    • Micro Sprint 2009-present Stallard chassis
    • 9-1/2" x 6-1/2" Aluminum

     

  • Stallard Micro / Mini Sprint Jacobs Ladder Paddle End Tab
    Stallard Micro / Mini Sprint Jacobs Ladder Paddle End Tab
    x
                These jacobs ladder tabs from Stallard Chassis work best with 2009-present Stallard paddle (9606213). They feature aluminum construction with a black anodized finish and multiple adjustment points.
    • Stallard jacobs ladder paddle end tabs
    • Rear suspension
    • Fits 2009-present Stallard paddle (960-6213)
    • Aluminum construction, black anodized finish
    • Multiple adjustment points
    • Choose Left or Ride side mount
  • Stallard 6500-1000A Mini Sprint Car 1000cc Fiberglass Front Hood Piece
    Stallard 6500-1000A Mini Sprint Car 1000cc Fiberglass Front Hood Piece
    x
                

    Speedway Motors offers a complete selection of Mini Sprint Car fiberglass body pieces.  These Micro/Mini Sprint front hood pieces are Stallard factory built body components and come dished to compliment the nose wing. Available in quality fiberglass construction in either a white or black gel coat finish.

    • 23.5" long x 9-1/4" tall x 22" wide
    • For 1000cc mini sprint
    • Stallard factory built component
    • Fiberglass construction
    • Dished to compliment nose wing
    • Choose white or black gel coat finish

     

  • Stallard Micro Sprint Kawasaki Shifter Assembly
    Stallard Micro Sprint Kawasaki Shifter Assembly
    x
                These Kawasaki shifter handle kits are designed to work with 2009-present  Stallard Micro Sprint chassis.  They include shifter handle, clutch  handle, shifter rod cable and 1/4" rod ends.
    • Fits 2009-present Stallard chassis
    • Includes is shifter handle, clutch handle, shift rod cable and 1/4" rod ends
    • Designed for Kawasaki
  • Stallard Chassis BC6230-100 Micro Sprint Brake Pedal, Short
    Stallard Chassis BC6230-100 Micro Sprint Brake Pedal, Short
    x
                

    This Stallard brake pedal is shorter to accommodate those drivers 5'8" and shorter. This is the perfect brake pedal for a mini sprint, midget or sprint car.

    Stallard Micro Sprint Brake Pedal, Short

     

    • Short version for drivers 5'8" and shorter
    • Overall Length: 10"
    • Diameter: .63"
    • Steel
    • Zinc Finish

     

     

  • Stallard Chassis BC103-022-FB Aluminum Front Hub
    Stallard Chassis BC103-022-FB Aluminum Front Hub
    x
                
    • Gold anodize finish
    • 3 spoke design for less weight
    • No brake mount
    • Machined aluminum
  • Stallard Chassis BC250-050-P Micro Sprint Racing Jacobs Ladder
    Stallard Chassis BC250-050-P Micro Sprint Racing Jacobs Ladder
    x
                These jacobs ladders feature black anodized flat aluminum construction and are designed for 2009-Up Stallard micro sprint cars. Be sure to include corresponding 5" jacobs ladder straps with these jacobs ladders.
    • Fits 2009-up Stallard cars
    • Black anodized flat aluminum
    • Add 5" straps (960-6212)
  • Stallard Micro Sprint 2005-Up Yamaha Motor Mount Slider Kit
    Stallard Micro Sprint 2005-Up Yamaha Motor Mount Slider Kit
    x
                

    This kit includes machined aluminum plates with a black anodize finish, and everything else needed to easily adjust the chain and motor. Designed to work with 2005 to present Stallard chassis.

    • Includes everything needed to easily adjust the chain and motor
    • Fits 2005 to present Stallard chassis
    • Yamaha applications

     

Goto Previous PagePrevious Page
1 2 3