Stallard® Chassis has a long and storied history in the world of fabrication and chassis technology for Mini Sprints and Midget Sprint Cars. Countless feature wins, track championships, and national championships fill the landscape of Stallard® Chassis accomplishments. All Stallard® Chassis are manufactured in Lincoln, Nebraska and are built on Mark Stallard's fixtures and use all of Stallard's components and fiberglass bodies.
Stallard Chassis has a long and storied history in the world of fabrication and technology for Micros and Mini Sprints. A symbol of performance, the Stallard brand continues by releasing the 2015 SST Chassis with new industry leading advancements for Micro racing. Mark Stallard has collaborated on the design efforts and built a support system to ensure the success of every customer.
These turnbuckles from Stallard® are designed for use on Micro Sprint racing applications. They come in a natural aluminum finish and feature 7/16" rod end heims for easy adjustment. Choose your desired length. Please note these are listed by the tube lengths provided. Each heim has approximately 1.5" of length added to each end therefore the working eye to eye length will be approximately 3" longer than the listed tube length. For example, the working eye to eye length of the 5.25" unit will be approximately 8.25" with slight length adjustment on either side of this working length.
- Available in 3.25", 3.75", 4.24", 4.75", 5.25" and 6" tube lengths
- 7/16" rod end heims
This hardware kit was designed specifically for the 5.5" right hand birdcage 96627025 and will also work with the 6" birdcage set 9609020.
- Flag bolt for torsion arm standoff
- Socket head cap screw to lock flag
- Radius rod pickup bolt
- Flat head cap screws to install chain guide bracket
CNC 6061 aluminum double flange spacers with radius cut to reduce rotating weight. Fit 1 ¾” axles. Available sizes: .150”, ¼”, ½”, ¾”, 1”, 1.180”, 1 ½”, 2”, 2 ¼”, 2 ½”, 2 ¾”, 3”, 3 ¼”, 3 ½”, 3 ¾”, 4”, 5”.
These Sprint racing radiators feature a down flow, double pass design with 1" inlet/outlet push-on fittings. They also include a 12" low profile puller fan on brackets already mounted.
- Lay down style - 30 degree angle
- 17" tall x 14" wide
- Down flow, double pass with 1" inlet/outlet push-on fittings
- 1/8" and 1/2" NPT fittings on the the tanks
- 2 mounting tabs
- It comes with a 12" low profile puller fan on brackets
Be sure to include Stallard® radiator air box (9606901) with this radiator.
This 27-spline aluminum axle spacer has a 3/4 inch width.
These torsion bar bushings from Stallard® Chassis fit 7/8" torsion bars with a .083" wall. These black nlyon bushings have an overall length of .90".
- Overall Length: .90"
- Inside Diameter: .90"
- Outside Diameter: 1.114"
- Flange Diameter: 1.25"
- Flange Thickness: .125"
- Sold Individually
- Nylon torsion bar bushing
- Fits 7/8" bars
- 1.250" x .083" tube
1.250" x .083" tube
- Heavy duty low drag material
- Fits 520 chain size
- 2.5” OD a bearing ID of 3/8"
These spindle pinch nuts come threaded for use with Micro sprint spindles. They will work with all popular 1" spindles.
- Threaded pinch nut for 1" spindles
- Fits Stallard®, Hyper, Triple X and all other popular spindle makes
This 27-spline aluminum axle spacer has a 1/2 inch width.
These Stallard® shaft collar retainer rings are designed for use on steering shafts and sway bars.
Micro Sprint Set Screw Collar
- 1/4" I.D.
- 1/2" O.D.
- Throttle rod stop collar
Reversible for right or left side use, these black anodized spindles are 7075 aluminum for superior strength and contain bronze 5/8” king pin bushings. Features a 1” aluminum snout and 5/16” steering arm mount holes on a 2.125” spread. Factory replacement on Hyper, Stallard®, PMP and RTS chassis.
Spindle ONLY - hardware sold separately.
Hardware sold separately.
These steering arms are lightweight and constructed of strong aluminum for both sprint cars & midgets. Designed for right hand side applications.
- Works on all popular micro sprint chassis
- Rigid and lightweight
- Black anodize
- Captures chain in both directions
- Allows quick sprocket changes
- Kit includes all hardware and brackets
- Heavy duty low drag material
- Fits 520 chain size
- 2.5” OD with a bearing ID of 5/16"
- Includes two kingpins, grease fittings, thrust bearings, and set screws
- Heat treated 4340 steel ground finish
- Best king pin on the market
These hollow steel kingpins are designed for use on micro-sprint race spindles.
- Includes king pin and grease fitting
- 5/8" O.D.
This Stallard® micro sprint torsion bar front axle is factory-built by Stallard®.
- 4130 steel construction
- Axle diameter: 1-3/4"
- Axle wall thickness: .095"
- Length: 40" center of king pin boss to center of king pin boss
- Axle king pin bosses are reamed & honed for perfect fit; no need for additional reaming
- Boss: 2" in length
- Left Front: 10 degree
- Right Front: 10 degree
- Threaded 3/8" stud panhard mount
- Threaded shock mounts
- Fits Stallard®, Triple X, PMP and other popular chassis brands
- 5" offset
- Less flex than aluminum arms for better bit
These Stallard® collars are designed to be used as a throttle rod stop or rod adapter. They have a black oxide finish and feature a set screw to secure it.
Stallard® Mico Sprint Throttle Cable Adapter
- 1/4" I.D.
- .68" O.D.
- Black oxide
- Throttle Cable throttle rod adapter
- Fits Stallard® cars only
Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Stallard® Chassis and Components. These steering universal joints are 9-16"-28 spline.
Stallard® Micro Sprint U-Joint
- 28 spline x .570 diameter
- metric spline
- Forged Vanadium steel yokes and u-joint
- Highest quality for racing or street
- Fits Stallard®, Edge & Driven Performance
These Micro Sprint racing accelerator cables are designed to work with 2001-Up Stallard® chassis cars.
- Micro/Mini Sprint applications
- 2001-Up Stallard® cars
Protect yourself during races with this right side arm guard from Stallard® Chassis. It made from high-density fiberglass to withstand abuse and is shaped to fit Stallard® Micro Sprint race car chassis.
- Provides driver extra arm space
- Full cockpit enclosure
- Rolled edges for precise fit
- Fiberglass construction, gel coat finish
- Choose from Black or White
- Fits any 1.75” x 27 spline rear axle
- Use the same hub for drive sprocket or brake rotor
- 5.25” bolt circle with six threaded ¼ x 20 mounting holes
These durable billet aluminum mounts attach your chain guard plate to your bumper. Works with Micro Sprint applications.
- Attaches chain guard plate to bumper
- Includes hardware
- Billet aluminum, black anodize finish
These lightweight slotted brake rotors from Stallard® Chassis are designed for use on Mini/Micro Sprint racing applications. They feature quality steel construction with a natural finish.
- Rotor Diameter: 9.50
- Rotor Thickness: .25 "
- Material Type: Steel
- Finish: Natural
- Weight: 2.60 lbs.
These upper steering support brackets are designed for use with Sprint racing Stallard® Chassis cars. They feature 5/16" mounting holes with steel construction and brass bushings.
- For Stallard® Chassis cars
- 1" shaft size
- 5/16" mounting holes
- Steel construction with brass bushings
- Weighs just .75 lbs.