Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Seals-It At Speedway Motors

Seals-It can mold and bond rubber to steel; along with their CNC equipment and CAD/CAM capabilities, Seals-It can design, build and manufacture production parts for racing and other industries. Their research and development program is always patenting new products and constantly testing, redesigning and evaluating them. All Seals-It products are proudly made in their manufacturing plant in Conneticut.

"Seals-It" Page 1 of 1

  • Axle Housing Inner Seal, 9 Inch Ford Grand National/Quick Change Rearends
    Axle Housing Inner Seal, 9 Inch Ford Grand National/Quick Change Rearends
    (Part #9190951)
    x
                

    High cornering forces can force the gear lube out of the center section and down the axle tube leaving the ring and pinion high and dry! This billet aluminum seal has three O-rings that seal it to the axle tube and two bonded, heavy duty, neoprene inner seals designed to compensate for any amount of axle shaft runout. Keeps gear oil in the center section. These seals will take up to an 1.5” diameter axle.

    • Anodized billet aluminum
    • A must for cambered rear ends
    • For 9" Ford Grand National and Quick Change type housings
    • For up to 1.5” diameter axle
    • Keeps gear oil in the center section
    • Outside Diameter: 2.56"
    • Overall Length: 1.50"
    • This seal will fit our steel wide 5 axle
    • Choose housing tube I.D. size needed:
      • 2.500" - Gold
      • 2.562" - Blue
      • 2.625" - Red
      • 2.750" - Silver

    919-0951 Instructions (PDF)

  • Seals-It WS7500 Heim Joint Rod End Seals, 3/4 Inch Hole, Set/6
    Seals-It WS7500 Heim Joint Rod End Seals, 3/4 Inch Hole, Set/6
    (Part #91001505)
    x
                

    These rod end seals are a neoprene rubber seal bonded to an aircraft quality washer. Extends the life of your rod ends by keeping the dirt, debris and moisture out of the spherical ball. They fit on both sides of the ball end of the heim joint and are sized to match the hole in the spherical ball.  

    For use with standard and Pro 1 Series rod end only. Sold in sets of six, which will cover both sides of three rod ends.

  • Seals-It TBS2S-07 Motor Plate Adapter for Torque Ball Seal
    Seals-It TBS2S-07 Motor Plate Adapter for Torque Ball Seal
    (Part #9402344)
    x
                This seal kit fits in the motor plate hole and helps keep dirt out of the U-joint and torque tube. 
            
  • Seals-It TBS2A-07 Complete Torque Ball Seal Kit
    Seals-It TBS2A-07 Complete Torque Ball Seal Kit
    (Part #9402340)
    x
                This seal kit fits in the motor plate hole and helps keep dirt out of the U-joint and torque tube.  
            
  • Seals-It FC-1001 French Distributor Clamp
    Seals-It FC-1001 French Distributor Clamp
    (Part #6101001)
    x
                

    "French" distributor clamps for Chevys provide superior clamping power and compensate for misalignment.

  • Seals-It SEIT3002 Injector Air Box Seal, 2 - 2-5/8 Inch O.D.
    Seals-It SEIT3002 Injector Air Box Seal, 2 - 2-5/8 Inch O.D.
    (Part #9403002)
    x
                Great for adapting to a new stack diameter or setting up a new air box. Rivet or screw to base plate of your air box to create an air tight seal.
            
  • Seals-It SEIT3003 Injector Air Box Seal, 2.75 - 3.150 Inch O.D.
    Seals-It SEIT3003 Injector Air Box Seal, 2.75 - 3.150 Inch O.D.
    (Part #9403003)
    x
                Great for adapting to a new stack diameter or setting up a new air box. Rivet or screw to base plate of your air box to create an air tight seal.
            
  • Seals It Single Grommet Seal, Rubber
    $16.99
    $17.51
    New
    Seals It Single Grommet Seal, Rubber
    (Part #9101003)
    x
                Please view the product's page for more information
            
  • Seals-It SEIT3001 Injector Air Box Seal, 2-1/2 - 2-3/4 Inch O.D.
    Seals-It SEIT3001 Injector Air Box Seal, 2-1/2 - 2-3/4 Inch O.D.
    (Part #9403001)
    x
                Great for adapting to a new stack diameter or setting up a new air box. Rivet or screw to base plate of your air box to create an air tight seal.
            
  • Seals-It WS4375 Heim Joint Rod End Seals, 7/16 Inch Hole, Set/6
    Seals-It WS4375 Heim Joint Rod End Seals, 7/16 Inch Hole, Set/6
    (Part #91001502)
    x
                

    These rod end seals are a neoprene rubber seal bonded to an aircraft quality washer. Extends the life of your rod ends by keeping the dirt, debris and moisture out of the spherical ball. They fit on both sides of the ball end of the heim joint and are sized to match the hole in the spherical ball.  

    For use with standard and Pro 1 Series rod end only. Sold in sets of six, which will cover both sides of three rod ends.

  • Seals-It SFP-105 Seal for Billet Fuel Pumps
    Seals-It SFP-105 Seal for Billet Fuel Pumps
    (Part #91011855)
    x
                  Keeps hot oil off your billet fuel pump which increases performance, but also will keep fuel out of your oil pan should a failure occur.   
            
  • Seals-It EAS1-05 Universal Inner Axle Seal for 2.5-2.75 Inch Tube
    Seals-It EAS1-05 Universal Inner Axle Seal for 2.5-2.75 Inch Tube
    (Part #9190970)
    x
                One size fits all! Fits any inner axle tube with an I.D. between 2-1/2" and 2-3/4". This eliminates ordering the wrong seal and allows you to always have the correct seal on hand. Typical applications* include Ford 9”, Quick change type rears, and 12 bolt GM. All seals are supplied with general installation guidelines. 
    • Inner Axle Seal I.D. = 7/8"
    • Axle sizes/Splines:  1-3/16” thru 1-1/2” / 28-31

     

    * Applications are reference only. Seals may be used on any rear end that is within the part number’s dimensional range. Rears can vary within a single model year and within the same model. Measure listed parameters before ordering.

  • Seals-It WS3750 Heim Joint Rod End Seals, 3/8 Inch Hole, Set/6
    Seals-It WS3750 Heim Joint Rod End Seals, 3/8 Inch Hole, Set/6
    (Part #91001501)
    x
                

    These rod end seals are a neoprene rubber seal bonded to an aircraft quality washer. Extends the life of your rod ends by keeping the dirt, debris and moisture out of the spherical ball. They fit on both sides of the ball end of the heim joint and are sized to match the hole in the spherical ball.  

    For use with standard and Pro 1 Series rod end only. Sold in sets of six, which will cover both sides of three rod ends.

  • Seals-It WS6250 Heim Joint Rod End Seals, 5/8 Inch Hole, Set/6
    Seals-It WS6250 Heim Joint Rod End Seals, 5/8 Inch Hole, Set/6
    (Part #91001504)
    x
                

    These rod end seals are a neoprene rubber seal bonded to an aircraft quality washer. Extends the life of your rod ends by keeping the dirt, debris and moisture out of the spherical ball. They fit on both sides of the ball end of the heim joint and are sized to match the hole in the spherical ball.  

    For use with standard and Pro 1 Series rod end only. Sold in sets of six, which will cover both sides of three rod ends.

  • Seals It Double Grommet Seal
    $54.99
    $59.74
    New
    Seals It Double Grommet Seal
    (Part #9101012)
    x
                Please view the product's page for more information
            
  • Seals-It Soft Control Arm Bushing
    Seals-It Soft Control Arm Bushing
    (Part #91034046)
    x
                
    If your General Motors G-Body race or street car uses “stock” trailing arms, you need to take a look at this part! By using a softer elastomer bushing material in the upper control arms, you can significantly increase suspension travel and bite. This construction will satisfy many rule requirements requiring “rubber only” bushings. 

    Fits GM G-Body Metric chassis (1978-88 Monte Carlo, Regal, etc.)  

    IMCA approved for Southern Sport Mods only. 

  • Seals-It WS3125 Heim Joint Rod End Seals, 5/16 Inch Hole, Set/6
    Seals-It WS3125 Heim Joint Rod End Seals, 5/16 Inch Hole, Set/6
    (Part #91001500)
    x
                

    These rod end seals are a neoprene rubber seal bonded to an aircraft quality washer. Extends the life of your rod ends by keeping the dirt, debris and moisture out of the spherical ball. They fit on both sides of the ball end of the heim joint and are sized to match the hole in the spherical ball.  

    For use with standard and Pro 1 Series rod end only. Sold in sets of six, which will cover both sides of three rod ends.

  • Seals-It WS5001 Heim Joint Rod End Seals, 1/2 Inch Hole, Set/6
    Seals-It WS5001 Heim Joint Rod End Seals, 1/2 Inch Hole, Set/6
    (Part #91001503)
    x
                

    These rod end seals are a neoprene rubber seal bonded to an aircraft quality washer. Extends the life of your rod ends by keeping the dirt, debris and moisture out of the spherical ball. They fit on both sides of the ball end of the heim joint and are sized to match the hole in the spherical ball.  

    For use with standard and Pro 1 Series rod end only. Sold in sets of six, which will cover both sides of three rod ends.

  • Seals-It TBS2C-07 Crank Seal Adapter
    Seals-It TBS2C-07 Crank Seal Adapter
    (Part #9402342)
    x
                Ever have dirt, oil, or orther debris get in your drive line? Install this crank seal adapter for Torque ball seal kit to help prevent that from happening. Will work with both Sprint Car and Midgets.
            
  • Air Cleaner Hold Down and Seal
    Air Cleaner Hold Down and Seal
    (Part #91011097)
    x
                Don't you just hate it when you take the air cleaner nut off and dirt falls down into your carb? 

    This hold down nut has a rubber boot bonded to it, which seals up the area around the air cleaner stud. Choose for either 1/4" or 5/16" air cleaner stud.

  • Garage Sale - Inner Axle/Housing Seal
    $39.99
    $55.99
    Garage Sale
    Garage Sale - Inner Axle/Housing Seal
    (Part #UP20188)
    x
                Billet aluminum seal has three O-rings that seal it to the axle tube and two bonded, heavy duty neoprene inner seals designed to compensate for any amount of axle shaft runout. Keeps gear oil in the center section.

    Choose housing tube I.D. size needed.

    Instructions (PDF)

     

    This is garage sale priced because it has been installed.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS