Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Sander Engineering At Speedway Motors

Sander Engineering, established in 1979, engineers and manufactures hardcore aluminum racing wheels for Sprint cars and Midgets. Speedway Motors stocks a variety of beadlock, non-beadlock, replacement wheel halfs, and billet aluminum birdcages from Sander Engineering. If you want quality circle track wheels and components, you want Sander Engineering.

Featured Products
Sander Plain Outer Wheel Half, 15 x 8 Inch, No Beadlock
Sander Plain Outer Wheel Half, 15 x 8 Inch, No Beadlock
x
            

Speedway is now stocking a large selection of Sander wheel repair parts. Replace only the damaged parts and save money compared to replacing the complete wheel. Sander Engineering, Inc. is the only racing wheel company to CNC cold spin all of the aluminum wheel halves.

They are cold formed over a two-stage mandrel and heat treated twice to get a perfect part. Splined centers are cast from the higheset quality aircraft magnesium. Wheels are fully polished front and back with covers and lock rings being red anodized for easy maintenance good looks and long life.

Sander wheel halves do not include lock ring or cover. See chart for replacements.

Sander Outer Half Wheel Chart Application (GIF)
 

Sander Engineering 1-10L 15 x 10 Inch Wheel Outer Half with Beadlock
Sander Engineering 1-10L 15 x 10 Inch Wheel Outer Half with Beadlock
x
            Speedway is now stocking a large selection of Sander wheel repair parts. Replace only the damaged parts and save money compared to replacing the complete wheel. Sander Engineering, Inc. is the only racing wheel company to CNC cold spin all of the aluminum wheel halves. 

They are cold formed over a two-stage mandrel and heat treated twice to get a perfect part. Splined centers are cast from the higheset quality aircraft magnesium. Wheels are fully polished front and back for easy maintenance good looks and long life.
Sander Splined Right Rear Wheel - 15x17, 6 Inch Offset, Beadlock
Sander Splined Right Rear Wheel - 15x17, 6 Inch Offset, Beadlock
x
            

Speedway is now stocking a large selection of Sander Wheels and repair parts. Sander Engineering, Inc. is the only racing wheel company to CNC cold spin all of the aluminum wheel halves.

They are cold formed over a two-stage mandrel and heat treated twice to get a perfect part. Splined centers are cast from the higheset quality aircraft magnesium. Wheels are fully polished front and back with covers and lock rings being red anodized for easy maintenance good looks and long life.

Beadlock with mud cover included. 

Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.

Sander Direct Mount Front Wheel, 15x8, 3 Inch Offset, No Beadlock/Cover
Sander Direct Mount Front Wheel, 15x8, 3 Inch Offset, No Beadlock/Cover
x
            

Speedway is now stocking a large selection of Sander Wheels and repair parts. Sander Engineering, Inc. is the only racing wheel company to CNC cold spin all of the aluminum wheel halves.

They are cold formed over a two-stage mandrel and heat treated twice to get a perfect part. Splined centers are cast from the higheset quality aircraft magnesium. Wheels are fully polished front and back with covers and lock rings being red anodized for easy maintenance good looks and long life.

Note: Sander wheel will not fit Weld hubs due to i/d - o/d clearance issue.  Must use Sander wheel on Sander hub only.  Please order wheels by the chart below to get the correct direct mount front wheel.

Wheel sold as:   Will actually measure:
3" off wheel          4" off wheel
4" off wheel          5" off wheel
5" off wheel          6" off wheel
6" off wheel          7" off wheel

Sander Direct Mount Front Wheel Chart Application (GIF)

Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.


 

"Sander Engineering" Page 1 of 5

  • Sander Direct Mount Front Wheel, 13x7, 4 Inch Offset, No Beadlock/Cover
    Sander Direct Mount Front Wheel, 13x7, 4 Inch Offset, No Beadlock/Cover
    x
                

    No beadlock - No Cover

    Note: Please order wheels by the chart below to get the correct direct mount front wheel.

    Wheel sold as:   Will actually measure:
    3" off wheel          4" off wheel
    4" off wheel          5" off wheel
    5" off wheel          6" off wheel
    6" off wheel          7" off wheel

    13" Direct Mount Front Wheel Chart Application (GIF)

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.

  • Sander Splined Left Rear Wheel, Inner Beadlock, 15 x 15 Inch, 4 Inch Offset
    Sander Splined Left Rear Wheel, Inner Beadlock, 15 x 15 Inch, 4 Inch Offset
    x
                

    Sander Engineering, Inc. is the only racing wheel company to CNC cold spin all of their aluminum wheel halves. They are cold formed over a two-stage mandrel and heat treated twice to get a perfect part. Splined centers are cast from the higheset quality aircraft magnesium. Wheels are fully polished front and back with covers and lock rings being red anodized for easy maintenance good looks and long life.

    Sander Wheel Application Chart (GIF)

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.


  • Sander Engineering 1-5L 13 x 5 Inch Outer Wheel Half with Beadlock
    Sander Engineering 1-5L 13 x 5 Inch Outer Wheel Half with Beadlock
    x
                

    Outer halves with beadlock.

    Speedway is now stocking a large selection of Sander wheels and repair parts. Replace only the damaged parts and save money compared to replacing the complete wheel. Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of their aluminum wheel halves.

    They are cold formed over a 2 stage mandrel and heat treated twice to get a perfect part.  Splined centers are cast from the highest quality aircraft magnesium. Wheels are fully polished front and back for easy maintenance, good looks, and a long life.

  • Sander Plain Outer Wheel Half, 15 x 11 Inch, No Beadlock
    Sander Plain Outer Wheel Half, 15 x 11 Inch, No Beadlock
    x
                

    Speedway is now stocking a large selection of Sander wheel repair parts. Replace only the damaged parts and save money compared to replacing the complete wheel. Sander Engineering, Inc. is the only racing wheel company to CNC cold spin all of the aluminum wheel halves.

    They are cold formed over a two-stage mandrel and heat treated twice to get a perfect part. Splined centers are cast from the higheset quality aircraft magnesium. Wheels are fully polished front and back with covers and lock rings being red anodized for easy maintenance good looks and long life.

    Sander wheel halves do not include lock ring or cover. See chart for replacements.

    Sander Outer Half Wheel Chart Application (GIF)
     

  • Sander Engineering 0-7L Outer Wheel Half, Beadlock, 10 x 7 Inch
    Sander Engineering 0-7L Outer Wheel Half, Beadlock, 10 x 7 Inch
    x
                Speedway stocks a large selection of Sander wheel repair parts. Replace only the damaged parts and save money compared to replacing the complete wheel. Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of their aluminum wheel halves. They are cold formed over a 2 stage mandrel and heat treated twice to get a perfect part. Wheels are fully polished front and back for easy maintenance, good looks, and a long life.

    12 holes, 6-3/4" bolt circle, .249 diameter thru for 1/4" bolts. With beadlock, but no ring or cover.

    Sander Wheel Half Chart (GIF)

  • Sander Engineering 10-020 10 Inch Lock Ring for Cover
    Sander Engineering 10-020 10 Inch Lock Ring for Cover
    x
                This Sander 10" Number 2 wheel lock ring with mud cover mounts is lightweight, strong, and anodized red for long life with easy maitenance. 
            
  • Sander Splined Right Rear Wheel - 15x18 5 Inch Offset
    Sander Splined Right Rear Wheel - 15x18 5 Inch Offset
    x
                

    Speedway is now stocking a large selection of Sander Wheels and repair parts. Sander Engineering, Inc. is the only racing wheel company to CNC cold spin all of the aluminum wheel halves.

    They are cold formed over a two-stage mandrel and heat treated twice to get a perfect part. Splined centers are cast from the higheset quality aircraft magnesium. Wheels are fully polished front and back with covers and lock rings being red anodized for easy maintenance good looks and long life.

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.

  • Sander 31 Spline 13 x 10 Inch Wheel, 3 Inch Offset, Non Beadlock
    Sander 31 Spline 13 x 10 Inch Wheel, 3 Inch Offset, Non Beadlock
    x
                

    Speedway is now stocking a large selection of Sander wheels and repair parts.  Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of their aluminum wheel halves. They are cold formed over a 2 stage mandrel and heat treated twice to get a perfect part.  Splined centers are cast from th highest quality aircraft magnesium. Wheels are fully polished front and back with covers and red anodized lock rings for easy maintenance, good looks, and a long life.

    31 Spline Wheel Chart Application (GIF)

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.

  • Sander Direct Mount Front Wheel, 13x8, 3 Inch Offset, Outer Beadlock
    Sander Direct Mount Front Wheel, 13x8, 3 Inch Offset, Outer Beadlock
    x
                

    Beadlock - No covers

    Note: Please order wheels by the chart below to get the correct direct mount front wheel.

    Wheel sold as:   Will actually measure:
    3" off wheel          4" off wheel
    4" off wheel          5" off wheel
    5" off wheel          6" off wheel
    6" off wheel          7" off wheel

    Direct Mount Front Wheel Chart Application (GIF)

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.

  • Sander Engineering 1-05L 15 x 5 Inch Wheel Outer Half with Beadlock
    Sander Engineering 1-05L 15 x 5 Inch Wheel Outer Half with Beadlock
    x
                Speedway is now stocking a large selection of Sander wheel repair parts. Replace only the damaged parts and save money compared to replacing the complete wheel. Sander Engineering, Inc. is the only racing wheel company to CNC cold spin all of the aluminum wheel halves. 

    They are cold formed over a two-stage mandrel and heat treated twice to get a perfect part. Splined centers are cast from the higheset quality aircraft magnesium. Wheels are fully polished front and back for easy maintenance good looks and long life.
  • Sander Direct Mount Front Wheel, 13x8, 4 Inch Offset, No Beadlock/Cover
    Sander Direct Mount Front Wheel, 13x8, 4 Inch Offset, No Beadlock/Cover
    x
                

    No beadlock - No Cover

    Note: Please order wheels by the chart below to get the correct direct mount front wheel.

    Wheel sold as:   Will actually measure:
    3" off wheel          4" off wheel
    4" off wheel          5" off wheel
    5" off wheel          6" off wheel
    6" off wheel          7" off wheel

    13" Direct Mount Front Wheel Chart Application (GIF)

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.

  • Sander 15 Inch Midget Sprint Beadlock Wheel Ring Without Cover
    Sander 15 Inch Midget Sprint Beadlock Wheel Ring Without Cover
    x
                

    These 15 in. beadlock wheel lock rings from Sander Engineering are designed to self-center the tire on the rim. These rings are CNC laser-cut out of high-grade steel to ensure a proper fit every time.

    Midget Wheel Beadlock Ring without Cover

    • 15 Inch 
    • High-grade steel ring
    • Feature tabs for mud cover
    • Will fit any Sanders Wheels that are 15"
  • Sander Direct Mount Front Wheel, 15x9, 5 Inch Offset, No Beadlock/Cover
    Sander Direct Mount Front Wheel, 15x9, 5 Inch Offset, No Beadlock/Cover
    x
                Please view the product's page for more information
            
  • Sander Direct Mount Front Wheel, 15x9, 3 Inch Offset, No Beadlock/Cover
    Sander Direct Mount Front Wheel, 15x9, 3 Inch Offset, No Beadlock/Cover
    x
                Please view the product's page for more information
            
  • Sander Engineering S333-26.5 Midget Torque Tube and Collar
    Sander Engineering S333-26.5 Midget Torque Tube and Collar
    x
                

    This Sander Engineering midget torque tube and collar will fit most Midget Rear ends. 

     

  • Sander Splined Right Rear Wheel - 15x17, 5 Inch Offset
    Sander Splined Right Rear Wheel - 15x17, 5 Inch Offset
    x
                

    Speedway is now stocking a large selection of Sander Wheels and repair parts. Sander Engineering, Inc. is the only racing wheel company to CNC cold spin all of the aluminum wheel halves.

    They are cold formed over a two-stage mandrel and heat treated twice to get a perfect part. Splined centers are cast from the higheset quality aircraft magnesium. Wheels are fully polished front and back with covers and lock rings being red anodized for easy maintenance good looks and long life.

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.

     

  • Sander 31 Spline Wheel, 13x10, 3 Inch Offset, Outer Beadlock & Cover
    Sander 31 Spline Wheel, 13x10, 3 Inch Offset, Outer Beadlock & Cover
    x
                

    Speedway is now stocking a large selection of Sander wheels and repair parts.  Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of their aluminum wheel halves.  They are cold formed over a 2 stage mandrel and heat treated twice to get a perfect part.  Splined centers are cast from th highest quality aircraft magnesium.  Wheels are fully polished front and back with covers and red anodized lock rings for easy maintenance, good looks, and a long life.

    31 Spline Wheel Chart Application (GIF)

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.

  • Sander Splined Right Rear Wheel - 15x18 4 Inch Offset
    Sander Splined Right Rear Wheel - 15x18 4 Inch Offset
    x
                

    With beadlock and cover.

    Speedway is now stocking a large selection of Sander Wheels and repair parts. Sander Engineering, Inc. is the only racing wheel company to CNC cold spin all of the aluminum wheel halves.

    They are cold formed over a two-stage mandrel and heat treated twice to get a perfect part. Splined centers are cast from the higheset quality aircraft magnesium. Wheels are fully polished front and back with covers and lock rings being red anodized for easy maintenance good looks and long life.

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.

  • Midget Hollow Torsion Bar, 1 Inch x 28 Inch
    Midget Hollow Torsion Bar, 1 Inch x 28 Inch
    x
                Each hollow midget torsion bar type is available in 28" length. 1" bearing and 1" serration. Choose diameter.
            
  • Sander Engineering 1-2L 13 x 2 Inch Outer Wheel Half with Beadlock
    Sander Engineering 1-2L 13 x 2 Inch Outer Wheel Half with Beadlock
    x
                

    Outer halves with beadlock.

    Speedway is now stocking a large selection of Sander wheels and repair parts. Replace only the damaged parts and save money compared to replacing the complete wheel. Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of their aluminum wheel halves.

    They are cold formed over a 2 stage mandrel and heat treated twice to get a perfect part.  Splined centers are cast from the highest quality aircraft magnesium. Wheels are fully polished front and back for easy maintenance, good looks, and a long life.

  • Sander Direct Mount Front Wheel, 15x8, 4 Inch Offset, No Beadlock/Cover
    Sander Direct Mount Front Wheel, 15x8, 4 Inch Offset, No Beadlock/Cover
    x
                Please view the product's page for more information
            
  • Sander Engineering 13-084-SI1 13x8 Wheel, 4 Inch Backspace
    Sander Engineering 13-084-SI1 13x8 Wheel, 4 Inch Backspace
    x
                

    Speedway is now stocking a large selection of Sander wheels and repair parts.  Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of their aluminum wheel halves. They are cold formed over a 2 stage mandrel and heat treated twice to get a perfect part.  Splined centers are cast from th highest quality aircraft magnesium. Wheels are fully polished front and back with covers and red anodized lock rings for easy maintenance, good looks, and a long life.

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.

  • Sander Engineering 1-07L 15 x 7 Inch Wheel Outer Half with Beadlock
    Sander Engineering 1-07L 15 x 7 Inch Wheel Outer Half with Beadlock
    x
                Speedway is now stocking a large selection of Sander wheel repair parts. Replace only the damaged parts and save money compared to replacing the complete wheel. Sander Engineering, Inc. is the only racing wheel company to CNC cold spin all of the aluminum wheel halves. 

    They are cold formed over a two-stage mandrel and heat treated twice to get a perfect part. Splined centers are cast from the higheset quality aircraft magnesium. Wheels are fully polished front and back for easy maintenance good looks and long life.
  • Sander 31 Spline 13 x 10 Inch Wheel, 1 Inch Offset, Non Beadlock
    Sander 31 Spline 13 x 10 Inch Wheel, 1 Inch Offset, Non Beadlock
    x
                

    Speedway is now stocking a large selection of Sander wheels and repair parts.  Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of their aluminum wheel halves. They are cold formed over a 2 stage mandrel and heat treated twice to get a perfect part.  Splined centers are cast from th highest quality aircraft magnesium. Wheels are fully polished front and back with covers and red anodized lock rings for easy maintenance, good looks, and a long life.

    31 Spline Wheel Chart Application (GIF)

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.

  • Sander 31 Spline Wheel, 13x10, 4 Inch Offset, Outer Beadlock & Cover
    Sander 31 Spline Wheel, 13x10, 4 Inch Offset, Outer Beadlock & Cover
    x
                

    Speedway is now stocking a large selection of Sander wheels and repair parts.  Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of their aluminum wheel halves.  They are cold formed over a 2 stage mandrel and heat treated twice to get a perfect part.  Splined centers are cast from th highest quality aircraft magnesium.  Wheels are fully polished front and back with covers and red anodized lock rings for easy maintenance, good looks, and a long life.

    31 Spline Wheel Chart Application (GIF)

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.

  • Sander Engineering 0-3 Wheel Inner Half, 10 x 3 Inch, Non Beadlock
    Sander Engineering 0-3 Wheel Inner Half, 10 x 3 Inch, Non Beadlock
    x
                No beadlock, no ring or cover.

    Speedway is now stocking a large selection of Sander wheels and repair parts. Replace only the damaged parts and save money compared to replacing the complete wheel. Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of their aluminum wheel halves.

    They are cold formed over a 2 stage mandrel and heat treated twice to get a perfect part.  Splined centers are cast from th highest quality aircraft magnesium. Wheels are fully polished front and back with covers and red anodized lock rings for easy maintenance, good looks, and a long life.

    12 holes, 6-3/4" bolt circle, .249 diameter thru for 1/4" bolts.

  • Sander Engineering 0-4L Outer Wheel Half, Beadlock, 10 x 4 Inch
    Sander Engineering 0-4L Outer Wheel Half, Beadlock, 10 x 4 Inch
    x
                Speedway stocks a large selection of Sander wheel repair parts. Replace only the damaged parts and save money compared to replacing the complete wheel. Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of their aluminum wheel halves. They are cold formed over a 2 stage mandrel and heat treated twice to get a perfect part. Wheels are fully polished front and back for easy maintenance, good looks, and a long life.

    12 holes, 6-3/4" bolt circle, .249 diameter thru for 1/4" bolts. With beadlock, but no ring or cover.

    Sander Wheel Half Chart (GIF)

  • Sander 31 Spline 13 x 10 Inch Wheel, 2 Inch Offset, Non Beadlock
    Sander 31 Spline 13 x 10 Inch Wheel, 2 Inch Offset, Non Beadlock
    x
                

    Speedway is now stocking a large selection of Sander wheels and repair parts.  Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of their aluminum wheel halves. They are cold formed over a 2 stage mandrel and heat treated twice to get a perfect part.  Splined centers are cast from th highest quality aircraft magnesium. Wheels are fully polished front and back with covers and red anodized lock rings for easy maintenance, good looks, and a long life.

    31 Spline Wheel Chart Application (GIF)

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.

  • Billet Aluminum Midget RH Standard Steering Arm
    Billet Aluminum Midget RH Standard Steering Arm
    x
                Billet RH standard aluminum steering arm.
            
  • Sander Engineering 1-3B Big Bell Inner Wheel Half, 13 x 3 Inch
    Sander Engineering 1-3B Big Bell Inner Wheel Half, 13 x 3 Inch
    x
                

    Speedway is now stocking a large selection of Sander wheels and repair parts. Replace only the damaged parts and save money compared to replacing the complete wheel. Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of their aluminum wheel halves. They are cold formed over a 2 stage mandrel and heat treated twice to get a perfect part. Wheels are fully polished front and back for easy maintenance, good looks, and a long life.

  • Sander Direct Mount Front Wheel, 10x8, 3 Inch Offset, Outer Beadlock
    Sander Direct Mount Front Wheel, 10x8, 3 Inch Offset, Outer Beadlock
    x
                

    Speedway is now stocking Sander splined mini sprint car wheels and repair parts. Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of the aluminum wheel halves. They are cold formed over a 2-stage mandrel and heat treated twice to get a perfect part. Splined centers are cast from the highest quality aircraft magnesium. Wheels are fully polished front and back with covers and lock rings being red anodized for easy maintenance, good looks and long life. 

    12 holes, 6-3/4" bolt circle, .249 diameter thru for 1/4" bolts.

    Direct Mount Front Wheel Chart Application (GIF)

  • Sander Splined Right Rear Wheel - 15x17, 6 Inch Offset, Beadlock
    Sander Splined Right Rear Wheel - 15x17, 6 Inch Offset, Beadlock
    x
                

    Speedway is now stocking a large selection of Sander Wheels and repair parts. Sander Engineering, Inc. is the only racing wheel company to CNC cold spin all of the aluminum wheel halves.

    They are cold formed over a two-stage mandrel and heat treated twice to get a perfect part. Splined centers are cast from the higheset quality aircraft magnesium. Wheels are fully polished front and back with covers and lock rings being red anodized for easy maintenance good looks and long life.

    Beadlock with mud cover included. 

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.

  • Sander Engineering 1-05B Big Bell Wheel Repair Half, 15 x 5 Inch
    Sander Engineering 1-05B Big Bell Wheel Repair Half, 15 x 5 Inch
    x
                Speedway stocks a large selection of Sander wheel repair parts. Replace only the damaged parts and save money compared to replacing the complete wheel. Sander Engineering, Inc. is the only racing wheel company to CNC cold spin all of the aluminum wheel halves. They are cold formed over a two-stage mandrel and heat treated twice to get a perfect part. Wheels are fully polished front and back with for easy maintenance good looks and long life.

    Big Bell wheel halves provide extra clearance for brake calipers on left front and right rear inners. Sander wheel halves do not include lock ring or cover.
  • Sander Engineering 1-15L 15 x 15 Inch Wheel Outer Half with Beadlock
    Sander Engineering 1-15L 15 x 15 Inch Wheel Outer Half with Beadlock
    x
                Speedway is now stocking a large selection of Sander wheel repair parts. Replace only the damaged parts and save money compared to replacing the complete wheel. Sander Engineering, Inc. is the only racing wheel company to CNC cold spin all of the aluminum wheel halves. 

    They are cold formed over a two-stage mandrel and heat treated twice to get a perfect part. Splined centers are cast from the higheset quality aircraft magnesium. Wheels are fully polished front and back for easy maintenance good looks and long life.
  • Sander Splined Left Rear Wheel, Inner Beadlock, 15 x 15 Inch, 5 Inch Offset
    Sander Splined Left Rear Wheel, Inner Beadlock, 15 x 15 Inch, 5 Inch Offset
    x
                

    Sander Engineering, Inc. is the only racing wheel company to CNC cold spin all of their aluminum wheel halves. They are cold formed over a two-stage mandrel and heat treated twice to get a perfect part. Splined centers are cast from the higheset quality aircraft magnesium. Wheels are fully polished front and back with covers and lock rings being red anodized for easy maintenance good looks and long life.

    Sander Wheel Application Chart (GIF)

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.

  • Sander 27-Spline Wheel, Outer Beadlock w/ Cover, 10 x 13 Inch, 4 Inch Offset
    Sander 27-Spline Wheel, Outer Beadlock w/ Cover, 10 x 13 Inch, 4 Inch Offset
    x
                

    Speedway stocks a variety of Sander splined mini sprint car wheels and repair parts. Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of the aluminum wheel halves. They are cold formed over a 2-stage mandrel and heat treated twice to get a perfect part. Splined centers are cast from the highest quality aircraft magnesium. Wheels are fully polished front and back with covers and lock rings being red anodized for easy maintenance, good looks and long life. 

    12 holes, 6-3/4" bolt circle, .249 diameter thru for 1/4" bolts.

    Sander Wheel Application Chart (GIF)

  • Sander 27-Spline Wheel, Outer Beadlock w/ Cover, 10 x 10 Inch, 4 Inch Offset
    Sander 27-Spline Wheel, Outer Beadlock w/ Cover, 10 x 10 Inch, 4 Inch Offset
    x
                

    Speedway stocks a variety of Sander splined mini sprint car wheels and repair parts. Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of the aluminum wheel halves. They are cold formed over a 2-stage mandrel and heat treated twice to get a perfect part. Splined centers are cast from the highest quality aircraft magnesium. Wheels are fully polished front and back with covers and lock rings being red anodized for easy maintenance, good looks and long life. 

    12 holes, 6-3/4" bolt circle, .249 diameter thru for 1/4" bolts.

    Sander Wheel Application Chart (GIF)

  • Sander Inner Wheel Half, 13 x 3 Inch, Non-Beadlock
    Sander Inner Wheel Half, 13 x 3 Inch, Non-Beadlock
    x
                

    Speedway is now stocking a large selection of Sander wheels and repair parts. Replace only the damaged parts and save money compared to replacing the complete wheel. Sander Engineering Inc. is the only racing wheel company to CNC cold spin all of their aluminum wheel halves. They are cold formed over a 2 stage mandrel and heat treated twice to get a perfect part.  Splined centers are cast from the highest quality aircraft magnesium. Wheels are fully polished front and back for easy maintenance, good looks, and a long life.

    Sander Wheel Half Application Chart (GIF)

  • Sander Engineering 15-010 15 Inch Inner Beadlock Ring With No Tabs
    Sander Engineering 15-010 15 Inch Inner Beadlock Ring With No Tabs
    x
                

    15" Sanders beadlock ring. Will fit any Sanders Wheels that are 15"

  • Sander Engineering 13-022 13 Inch Midget Wheel Dust Cover
    Sander Engineering 13-022 13 Inch Midget Wheel Dust Cover
    x
                

    These 13 in. wheel mud covers from Sander Engineering feature quarter turn fastener fasteners for simple mud cover attachment. These mud covers prevent dirt and debris from collecting within your wheel, which can slow you down on the race track.

    Midget Wheel Dust Cover

    • 13"
    • quarter turn fastener fasteners
Goto Previous PagePrevious Page
1 2 3 4 5