Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products

With more than 60 years of racing experience, you can trust Speedway Motors to supply you with quality safety equipment. We know how important your safety is, that's why we stock the top brands like Simpson. Impact, Sparco & Alpinestar. From suits and helmets to seats and belts, Speedway has the best selection, best prices and best service on the safety gear you need.

"Safety Products, Head/Neck Restraints & Accessories" Page 1 of 2

  • 802 Solutions CP02-08LM 2 Inch Crash Pad w/ 8 Inch Lumbar Back Pad
    802 Solutions CP02-08LM 2 Inch Crash Pad w/ 8 Inch Lumbar Back Pad
    x
                These 2" thick crash pads will mount to your Sprint car seat to help  reduce the risk of spinal injury in crashes during a race.  They are  made of special shock absorbing material that provides the  compressible space needed to reduce peak impact forces in a crash.
    • 2" shock absorbing material bottom with an 8" tall lumbar pad in a tough upholstery covering
    • Adjustable for seats from 18” to 14” width and thickness can be easily adjusted from 2” to 1-1/2” to 1” as necessary by removing 1/2" layers
    • Helps reduce the risk of spinal injury in crashes 
    • The Crash Pad is made of special shock absorbing material that provides the compressible space needed to reduce peak impact forces in a crash
  • Simpson Racing Hybrid Pro Rage Head/Neck Restraint, Sliding Tether Version
    Simpson Racing Hybrid Pro Rage Head/Neck Restraint, Sliding Tether Version
    x
                

    The Hybrid Pro Rage is the best design yet, giving you the ultimate in safety and comfort.  This device is designed to work in all seats and with no modification, while giving you the best protection in all impacts, not just frontal.  The low top provides faster exits whether you are race dirt or asphalt, drag or off road.

     

    • Composite and Carbon Fiber Constructions
    • Minimalist Design.
    • Compact Size Under 7 Inches
    • If your helmet is currently fitted for a HANS device you can easily upgrade to a Simpson Head/Neck Restraint System that corresponds to the same space and location
    • Engineered by Trevor Ashline with Safety Solutions Technology

     

    SFI Recertification Notice

    Simpson Head and Neck Restraint Sizing Chart

  • Speedway Racing Neck Brace, SFI 3.3-1
    Speedway Racing Neck Brace, SFI 3.3-1
    x
                
    Speedway's racing neck brace has a fire retardant cotton cover and foam inner pad to give it a SFI 3.3-1 rating. It has a velcro closure for universal fit.
    • Fire retardant cotton cover and foam inner pad
    • Velcro closure for universal fit
    • SFI 3.3-1 rated
    • Available in Red, Blue, Black, or Purple
  • Simpson Helmet Restraint
    $14.99
    Product Rating: 5.00 Stars
    Simpson Helmet Restraint
    x
                This helmet restraint offers quick attachment and adjustment with durable steel hardware. Helmet d-ring installation. 

    Available in red, blue, or black.
  • HANS AK1132-22 Sport Series Post Anchor Kit
    HANS AK1132-22 Sport Series Post Anchor Kit
    x
                
    • Set of two standard HANS post anchors.
    • Attaches one HANS Device to one helmet. 
    • As fitted standard on all Sport kits.

    NOTE: These items will only be shipped to an address in the US, Canada and Mexico.



     

  • HANS AK1142-2 Quick Click for SA Helmet
    $80.99
    $81.00
    HANS AK1142-2 Quick Click for SA Helmet
    x
                
    • Quick Click anchor attaches or releases instantly
    • Includes two anchors (right and left sides, hardware, and wrench)
    • Requires Quick Click tether to work properly
  • HANS DK11233-321 Hans Device Sport II-20  -Medium-PA-SA-Sliding Tether
    HANS DK11233-321 Hans Device Sport II-20 -Medium-PA-SA-Sliding Tether
    x
                
    • Rounded collar improves fitting
    • Same performance as all HANS Device models
    • Injection molded – lighter than Sport I, heavier than Pro Series
    • New DuPont polymer reduces weight
    • For SA helmet applications only
    • Only available for 20 degrees seats
  • Simpson Racing Hutchens Device Installation Kit
    Simpson Racing Hutchens Device Installation Kit
    x
                

    The Hutchens Device is a harness that transfers head and neck loads to the seat belts. This system is normally used in stock cars and modifieds.  This strap restraint system stays with the driver which allows easy entry and exit of car.  Easy to follow instructions show you how and where to install hardware on your helmet.

    Hutchens Device Sizing Guide

    Instruction Sheet

  • HANS K9115 Replacement Backing Nuts
    HANS K9115 Replacement Backing Nuts
    x
                Includes:
    • HANS backing nuts (2)
    • Wrench
  • Impact Racing Necksgen Helmet Post Kit
    Impact Racing Necksgen Helmet Post Kit
    x
                

    Use these posts for your 2nd helmet to use with the Necksgen head and neck restraint system. 

    • Set of Necksgen posts
  • HANS Pro Series Post Anchor Kit
    HANS Pro Series Post Anchor Kit
    x
                
    • Set of two professional HANS helmet anchors.
    • As furnished with all professional HANS Devices.
    • Converts one helmet for use with a HANS Device.
    NOTE: These items will only be shipped to an address in the US, Canada and Mexico.

     

  • Simpson Padded Neck Support
    $29.99
    $39.99
    Product Rating: 4.50 Stars
    Simpson Padded Neck Support
    x
                

    Made of high density foam and covered with durable Nomex III. These supports help to reduce neck fatigue and are great for virtually all types of racing. Available in red, blue, or black.

    Rated SFI-3.3. Rating visible on neck brace.

  • Speedway Helmet Restraint
    $8.99
    Speedway Helmet Restraint
    x
                Quality construction makes this restraint a great value. Fully adjustable, fits any helmet. Includes D-ring.   

    Available in red, blue, black, yellow, orange, white or purple.

  • HANS DK12044-421 Adjustable Hans Device, Quick Click, SA, Large
    HANS DK12044-421 Adjustable Hans Device, Quick Click, SA, Large
    x
                The HANS Device Adjustable™ provides award-winning HANS performance in any type of car.
    • Adjustable angle from 10 to 40 degrees fits all types of cars and seats
    • Easy to adjust in 5 degree increments – providing more comfort
    • Sliding tether
    • Quick Click
    • SA hardware (Nutwashers included with SA hardware)
    • Weight: 970 grams
    • Size: Large

    Frequently Asked Questions (PDF)

    Altering The Angles (PDF)

  • HANS DK11233-421 Hans Device Sport II-20  -Medium-QC-SA-Sliding Tether
    HANS DK11233-421 Hans Device Sport II-20 -Medium-QC-SA-Sliding Tether
    x
                
    • Rounded collar improves fitting
    • Same performance as all HANS Device models
    • Injection molded – lighter than Sport I, heavier than Pro Series
    • New DuPont polymer reduces weight
    • For SA helmet applications only
    • Only available for 20 degrees seats
  • Impact Necksgen Head & Neck Restraint Small/Youth, SFI 38.1, Adjusts
    Impact Necksgen Head & Neck Restraint Small/Youth, SFI 38.1, Adjusts
    x
                

    The Impact NecksGen is a revolutionary head and neck restraint designed specifically with adjustablilty, angular impact protection, comfort, and affordability in mind.  Manufactured from a lightweight carbon fiber DuPont composite material, the Impact NecksGen weighs a mere 1.8 pounds and features unique body forming shoulder pads minimizing the pressure points on the collarbones.  Designed with a single adjustable lateral helmet tether, the Impact NecksGen unit provides an alternate load path for superior side on impact protection.

    • MADE IN THE USA!!!
    • SFI 38.1 Compliant.
    • Adjustable - Adjusts between 10 - 40 degrees for a Variety of Uses.
    • Lightweight - Weights Less than Than 2 Pounds (1.8 pounds of 816.5 grams)
    • Comfortable - Body Forming Shoulder Pads offer Superior Comfort.
    • SAFE - Offers Superior Angular Impact Protection.
    • Made from Carbon Fiber DuPont Composite Materials

    Impact NecksGen now comes in 3 sizes. Large unit fits most adults, typically a driver 100 lbs or more. Medium unit is for smaller torso drivers 1" narrower but still accepts 2" or 3" seat belts. Youth unit, also fits small torso drivers, typically youth drivers between 7 and 16 years old. Youth size accommodates only a 2" seat belt.

    Sizing Specifications

  • HANS DK 11243-321 Hans Device Sport II-20  -Large-PA-SA-Sliding Tether
    HANS DK 11243-321 Hans Device Sport II-20 -Large-PA-SA-Sliding Tether
    x
                
    • Rounded collar improves fitting
    • Same performance as all HANS Device models
    • Injection molded – lighter than Sport I, heavier than Pro Series
    • New DuPont polymer reduces weight
    • For SA helmet applications only
    • Only available for 20 degrees seats
  • HANS DK 11243-411 Hans Device Sport II-20  -Large-QC-SAH-Sliding Tether
    HANS DK 11243-411 Hans Device Sport II-20 -Large-QC-SAH-Sliding Tether
    x
                
    • Rounded collar improves fitting
    • Same performance as all HANS Device models
    • Injection molded – lighter than Sport I, heavier than Pro Series
    • New DuPont polymer reduces weight
    • For SAH Helmets that are equipped with an M6 terminal or nut already built into the helmet
    • Only available for 20 degrees seats

    HANS Model and Size Tip (GIF)

  • Zoombang ZB-6600CB HANS Device Pads
    Zoombang ZB-6600CB HANS Device Pads
    x
                

    The specially engineered polymer is soft at rest and instantly stiffens on impact absorbing the shock and dissipating energy. Will not wear out, melt, or freeze. Rests comfortably between bottom of device and driving suit.

    Sold as a pair.

  • HANS Device Quick Click Sliding Tether, Sport II
    HANS Device Quick Click Sliding Tether, Sport II
    x
                
    • Replacement sliding tether for Quick Click type of helmet anchors
    • Includes 2 tether carriers and 4 screws
    • 3 lengths: Short 17", Standard 18", Long 19"
    • Standard 18" length works in most applications
    • All tether lengths offer the same level of protection
  • HANS TK1132QD Quick Disconnect Fixed Length Tether
    HANS TK1132QD Quick Disconnect Fixed Length Tether
    x
                Replacement fixed Quick Disconnect tethers for Post Anchor helmet attachments. Includes two tethers and two loops. 

    NOTE: These items will only be shipped to an address in the US, Canada and Mexico.

  • HANS DK12034-421 Adjustable Hans Device, Quick Click, SA, Medium
    HANS DK12034-421 Adjustable Hans Device, Quick Click, SA, Medium
    x
                The HANS Adjustable™ provides award-winning HANS performance in any type of car.
    • Adjustable angle from 10 to 40 degrees fits all types of cars and seats
    • Easy to adjust in 5 degree increments – providing more comfort
    • Sliding tether
    • Quick click
    • SA hardware (Nutwashers included with SA hardware)
    • Weight: 970 grams
    • Size: Medium

    Frequently Asked Questions (PDF)

    Altering The Angles (PDF)

  • HANS TU11421 Sliding Tether Upgrade Kit
    HANS TU11421 Sliding Tether Upgrade Kit
    x
                Converts one HANS Device to Quick Click anchors with sliding Vision Advantage PLUS tethers. 

    NOTE: These items will only be shipped to an address in the US, Canada and Mexico.

  • HANS TU11411 Hans Device Tether Upgrade
    HANS TU11411 Hans Device Tether Upgrade
    x
                
    • Fits all Hans devices
    • Sliding tether upgrade with standard post collar anchors.
    • Comes with all parts to convert one SAH helmet and one HANS Device.
    • Standard 18"/450cm tether length.
  • HANS DK11212-411 Hans Device Sport-20   Super Small QC-Sliding SAH
    HANS DK11212-411 Hans Device Sport-20 Super Small QC-Sliding SAH
    x
                

    Being the leader in head restraint technology HANS has answered the call with new devices designed specifically for the new SAH2010 helmets. This will affect the BELL Pro and ULTRA series helmets and any other helmet that has the 6mm attachement nut installed from the manufacturer. For the standard post and anchor style of device they come with a post that can be indexed. All parts and devices sold for the SAH2010 helmets will not require the nutwashers so you save on the cost of the post kits and/or devices.

    This is built specifically for SAH Helmets and does not come with the nutwashers. Will not work on SA rated helmets.

    The primary difference between the Pro Series and the Sport Series is the weight. There is no difference in the safety protection offered with either one. The Sport Series weighs approximately 2.25lbs. We offer both models with quick disconnect sliding tethers. This gives you the most mobility and vision. You will need a 1/4" drill bit and a measuring tape to install the HANS device anchors to your helmet. Complete instructions and a special tool are included.

    •   This is SFI 38.1

    The injection molded super structural gives the same protection as the Pro Series. It weighs about 2.25lbs but

  • HANS DK11233-411 Hans Device Sport II-20  -Med-QC-SAH-Sliding Tether
    HANS DK11233-411 Hans Device Sport II-20 -Med-QC-SAH-Sliding Tether
    x
                
    • Rounded collar improves fitting
    • Same performance as all HANS Device models
    • Injection molded – lighter than Sport I, heavier than Pro Series
    • New DuPont polymer reduces weight
    • For SAH Helmets that are equipped with an M6 terminal or nut already built into the helmet
    • Only available for 20 degrees seats

    HANS Model and Size Tip (GIF)

  • HANS DK11241-321 Pro Series Device, Post Anchors, 20 Degree Large
    HANS DK11241-321 Pro Series Device, Post Anchors, 20 Degree Large
    x
                

    The HANS device stands for Head and Neck Support. It was designed with you and your family in mind. The goal in racing is to go faster than anyone else on the track and cross the finish line first. And as technology increases speeds, it also increases the risks. Remember, you a have a family to go home to when the night of racing is over.

    The primary difference between the Pro Series and the Sport Series is the weight. There is no difference in the safety protection offered with either one. The Pro Series weighs approx 1 lb. less than the Sport. We offer both models with quick disconnect sliding tethers. This gives you the most mobility and vision. You will need a 1/4" drill bit and a measuring tape to install the HANS device anchors to your helmet. Complete instructions and a special tool are included.

    Made with high modulous carbon fiber this is the ultimate in lightweight protection.  Includes quick disconnect and sliding tethers.

    Hans Device Sizing Chart (Link)

    QuickStart Guide (PDF)

    Anchor Instructions (PDF)  

  • 802 Solutions CP02-20BP 2 Inch Crash Pad w/ 20 Inch Shoulder Height Back Pad
    802 Solutions CP02-20BP 2 Inch Crash Pad w/ 20 Inch Shoulder Height Back Pad
    x
                These 2" thick crash pads will mount to your Sprint car seat to help reduce the risk of spinal injury in crashes during a race.  They are made of special shock absorbing material that provides the  compressible space needed to reduce peak impact forces in a crash.
    • 2" shock absorbing material bottom with a 20” shoulder height back pad made of two 1/2” x 20” layers in a tough adjustable upholstery covering
    • Adjustable for seats from 18” to 14” width and thickness can be easily adjusted from 2” to 1-1/2” to 1” as necessary by removing 1/2" thick layers
    • Helps reduce the risk of spinal injury in crashes 
    • The Crash Pad is made of special shock absorbing material that provides the compressible space needed to reduce peak impact forces in a crash
  • HANS DK11241-311 Hans Device Pro-20LP Post Anchors Sliding SAH Helmets
    HANS DK11241-311 Hans Device Pro-20LP Post Anchors Sliding SAH Helmets
    x
                

    Being the leader in head restraint technology HANS has answered the call with new devices designed specifically for the new SAH2010 helmets. This will affect the BELL Pro and ULTRA series helmets and any other helmet that has the 6mm attachement nut installed from the manufacturer. For the standard post and anchor style of device they come with a post that can be indexed. All parts and devices sold for the SAH2010 helmets will not require the nutwashers so you save on the cost of the post kits and/or devices.

    This is built specifically for SAH Helmets and does not come with the nutwashers. Will not work on SA rated helmets.

    The primary difference between the Pro Series and the Sport Series is the weight. There is no difference in the safety protection offered with either one. The Pro Series weighs approx 1 lb. less than the Sport. We offer both models with quick disconnect sliding tethers. This gives you the most mobility and vision. You will need a 1/4" drill bit and a measuring tape to install the HANS device anchors to your helmet. Complete instructions and a special tool are included.

    Made with high modulous carbon fiber this is the ultimate in lightweight protection.  Includes quick disconnect and sliding tethers.

    Hans Device Sizing Chart (Link)

  • HANS K9011-BLK Hans Device Gel Padding, Black
    HANS K9011-BLK Hans Device Gel Padding, Black
    x
                
    • Accessory gel padding for HANS Devices.
    • Includes two shoulder pads.
    • Fits medium and large devices only. 
    • Soft medical gel pad provides added comfort.

    NOTE: These items will only be shipped to an address in the US, Canada and Mexico.

  • HANS DK12034-311 Adjustable Hans Device, Post Anchor, SAH, Medium
    HANS DK12034-311 Adjustable Hans Device, Post Anchor, SAH, Medium
    x
                The HANS Adjustable™ provides award-winning HANS performance in any type of car.
    • Adjustable angle from 10 to 40 degrees fits all types of cars and seats
    • Easy to adjust in 5 degree increments – providing more comfort
    • Sliding tether
    • Post Anchor clips
    • SAH hardware (No nutwashers with SAH hardware)
    • Weight: 970 grams
    • Size: Medium

    Frequently Asked Questions (PDF)

    Altering The Angles (PDF)

  • HANS DK11243-421 SA Sport II, Quick Click/Sliding Tether, 20 Deg-Large
    HANS DK11243-421 SA Sport II, Quick Click/Sliding Tether, 20 Deg-Large
    x
                
    • Rounded collar improves fitting
    • Same performance as all HANS Device models
    • Injection molded – lighter than Sport I, heavier than Pro Series
    • New DuPont polymer reduces weight
    • For SA helmet applications only
    • Only available for 20 degrees seats
Goto Previous PagePrevious Page
1 2