Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Safety At Speedway Motors

With more than 60 years of racing experience, you can trust Speedway Motors to supply you with quality safety equipment. We know how important your safety is, that's why we stock the top brands like Simpson Racing, Impact, Sparco, and Alpinestars. From racing suits and racing helmets to racing seats and belts, Speedway has the best selection, best prices and best service on the safety gear you need.

"Safety Products, Head/Neck Restraints & Accessories" Page 1 of 2

  • Speedway Helmet Restraint
    $8.99
    Speedway Helmet Restraint
    (Part #91072352)
    x
                Quality construction makes this restraint a great value. Fully adjustable, fits any helmet. Includes D-ring.   

    Available in red, blue, black, yellow, orange, white or purple.

  • HANS DK 11243-321 Hans Device Sport II-20  -Large-PA-SA-Sliding Tether
    HANS DK 11243-321 Hans Device Sport II-20 -Large-PA-SA-Sliding Tether
    (Part #451112421)
    x
                
    • Rounded collar improves fitting
    • Same performance as all HANS Device models
    • Injection molded – lighter than Sport I, heavier than Pro Series
    • New DuPont polymer reduces weight
    • For SA helmet applications only
    • Only available for 20 degrees seats
  • HANS DK 11243-411 Hans Device Sport II-20  -Large-QC-SAH-Sliding Tether
    HANS DK 11243-411 Hans Device Sport II-20 -Large-QC-SAH-Sliding Tether
    (Part #451112441)
    x
                
    • Rounded collar improves fitting
    • Same performance as all HANS Device models
    • Injection molded – lighter than Sport I, heavier than Pro Series
    • New DuPont polymer reduces weight
    • For SAH Helmets that are equipped with an M6 terminal or nut already built into the helmet
    • Only available for 20 degrees seats

    HANS Model and Size Tip (GIF)

  • Zoombang ZB-6600CB HANS Device Pads
    Zoombang ZB-6600CB HANS Device Pads
    (Part #4416600)
    x
                

    The specially engineered polymer is soft at rest and instantly stiffens on impact absorbing the shock and dissipating energy. Will not wear out, melt, or freeze. Rests comfortably between bottom of device and driving suit.

    Sold as a pair.

  • HANS Device Quick Click Sliding Tether, Sport II
    HANS Device Quick Click Sliding Tether, Sport II
    (Part #45111413)
    x
                
    • Replacement sliding tether for Quick Click type of helmet anchors
    • Includes 2 tether carriers and 4 screws
    • 3 lengths: Short 17", Standard 18", Long 19"
    • Standard 18" length works in most applications
    • All tether lengths offer the same level of protection
  • HANS TK1132QD Quick Disconnect Fixed Length Tether
    HANS TK1132QD Quick Disconnect Fixed Length Tether
    (Part #451222)
    x
                Replacement fixed Quick Disconnect tethers for Post Anchor helmet attachments. Includes two tethers and two loops. 

    NOTE: These items will only be shipped to an address in the US, Canada and Mexico.

  • HANS DK12034-421 Adjustable Hans Device, Quick Click, SA, Medium
    HANS DK12034-421 Adjustable Hans Device, Quick Click, SA, Medium
    (Part #451123442)
    x
                The HANS Adjustable™ provides award-winning HANS performance in any type of car.
    • Adjustable angle from 10 to 40 degrees fits all types of cars and seats
    • Easy to adjust in 5 degree increments – providing more comfort
    • Sliding tether
    • Quick click
    • SA hardware (Nutwashers included with SA hardware)
    • Weight: 970 grams
    • Size: Medium

    Frequently Asked Questions (PDF)

    Altering The Angles (PDF)

  • HANS TU11421 Sliding Tether Upgrade Kit
    HANS TU11421 Sliding Tether Upgrade Kit
    (Part #45131)
    x
                Converts one HANS Device to Quick Click anchors with sliding Vision Advantage PLUS tethers. 

    NOTE: These items will only be shipped to an address in the US, Canada and Mexico.

  • HANS TU11411 Hans Device Tether Upgrade
    HANS TU11411 Hans Device Tether Upgrade
    (Part #45141)
    x
                
    • Fits all Hans devices
    • Sliding tether upgrade with standard post collar anchors.
    • Comes with all parts to convert one SAH helmet and one HANS Device.
    • Standard 18"/450cm tether length.
  • HANS DK11233-411 Hans Device Sport II-20  -Med-QC-SAH-Sliding Tether
    HANS DK11233-411 Hans Device Sport II-20 -Med-QC-SAH-Sliding Tether
    (Part #451112341)
    x
                
    • Rounded collar improves fitting
    • Same performance as all HANS Device models
    • Injection molded – lighter than Sport I, heavier than Pro Series
    • New DuPont polymer reduces weight
    • For SAH Helmets that are equipped with an M6 terminal or nut already built into the helmet
    • Only available for 20 degrees seats

    HANS Model and Size Tip (GIF)

  • HANS DK11241-321 Pro Series Device, Post Anchors, 20 Degree Large
    HANS DK11241-321 Pro Series Device, Post Anchors, 20 Degree Large
    (Part #451924121)
    x
                

    The HANS device stands for Head and Neck Support. It was designed with you and your family in mind. The goal in racing is to go faster than anyone else on the track and cross the finish line first. And as technology increases speeds, it also increases the risks. Remember, you a have a family to go home to when the night of racing is over.

    The primary difference between the Pro Series and the Sport Series is the weight. There is no difference in the safety protection offered with either one. The Pro Series weighs approx 1 lb. less than the Sport. We offer both models with quick disconnect sliding tethers. This gives you the most mobility and vision. You will need a 1/4" drill bit and a measuring tape to install the HANS device anchors to your helmet. Complete instructions and a special tool are included.

    Made with high modulous carbon fiber this is the ultimate in lightweight protection.  Includes quick disconnect and sliding tethers.

    Hans Device Sizing Chart (Link)

    QuickStart Guide (PDF)

    Anchor Instructions (PDF)  

  • HANS NAK12034-41 Adjustable Hans Device-Quick Clip, Medium, No Anchors
    HANS NAK12034-41 Adjustable Hans Device-Quick Clip, Medium, No Anchors
    (Part #45122344)
    x
                The HANS Adjustable™ provides award-winning HANS performance in any type of car. These anchor-free kits allow you to save big by utilizing your existing Hans helmet anchors! 
    • Adjustable angle from 10 to 40 degrees fits all types of cars and seats
    • Easy to adjust in 5 degree increments – providing more comfort
    • Sliding tether
    • Accepts Quick Click Anchors
    • Quick Clicks NOT included
    • Weight: 970 grams
    • Size: Medium

    Frequently Asked Questions (PDF)

    Altering The Angles (PDF)

  • Impact Racing Necksgen Helmet Post Kit
    Impact Racing Necksgen Helmet Post Kit
    (Part #44991005)
    x
                

    Use these posts for your 2nd helmet to use with the Necksgen head and neck restraint system. 

    • Set of Necksgen posts
  • HANS AK1132-22 Sport Series Post Anchor Kit
    HANS AK1132-22 Sport Series Post Anchor Kit
    (Part #451AK222)
    x
                
    • Set of two standard HANS post anchors.
    • Attaches one HANS Device to one helmet. 
    • As fitted standard on all Sport kits.

    NOTE: These items will only be shipped to an address in the US, Canada and Mexico.



     

  • HANS DK12034-411 Adjustable Hans Device, Quick Click, SAH, Medium
    HANS DK12034-411 Adjustable Hans Device, Quick Click, SAH, Medium
    (Part #451123441)
    x
                The HANS Adjustable™ provides award-winning HANS performance in any type of car.
    • Adjustable angle from 10 to 40 degrees fits all types of cars and seats
    • Easy to adjust in 5 degree increments – providing more comfort
    • Sliding tether
    • Quick click
    • SAH hardware (Nutwashers NOT included with SAH hardware)
    • Weight: 970 grams
    • Size: Medium

    Frequently Asked Questions (PDF)

    Altering The Angles (PDF)

  • HANS DK12034-321 Adjustable Hans Device, Post Anchor, SA, Medium
    HANS DK12034-321 Adjustable Hans Device, Post Anchor, SA, Medium
    (Part #451123432)
    x
                The HANS Adjustable™ provides award-winning HANS performance in any type of car.
    • Adjustable angle from 10 to 40 degrees fits all types of cars and seats
    • Easy to adjust in 5 degree increments – providing more comfort
    • Sliding tether
    • Post Anchor clips
    • SA hardware (Nutwashers included with SA hardware)
    • Weight: 970 grams
    • Size: Medium

    Frequently Asked Questions (PDF)

    Altering The Angles (PDF)

     

  • HANS DK11241-311 Hans Device Pro-20LP Post Anchors Sliding SAH Helmets
    HANS DK11241-311 Hans Device Pro-20LP Post Anchors Sliding SAH Helmets
    (Part #451924141)
    x
                

    Being the leader in head restraint technology HANS has answered the call with new devices designed specifically for the new SAH2010 helmets. This will affect the BELL Pro and ULTRA series helmets and any other helmet that has the 6mm attachement nut installed from the manufacturer. For the standard post and anchor style of device they come with a post that can be indexed. All parts and devices sold for the SAH2010 helmets will not require the nutwashers so you save on the cost of the post kits and/or devices.

    This is built specifically for SAH Helmets and does not come with the nutwashers. Will not work on SA rated helmets.

    The primary difference between the Pro Series and the Sport Series is the weight. There is no difference in the safety protection offered with either one. The Pro Series weighs approx 1 lb. less than the Sport. We offer both models with quick disconnect sliding tethers. This gives you the most mobility and vision. You will need a 1/4" drill bit and a measuring tape to install the HANS device anchors to your helmet. Complete instructions and a special tool are included.

    Made with high modulous carbon fiber this is the ultimate in lightweight protection.  Includes quick disconnect and sliding tethers.

    Hans Device Sizing Chart (Link)

  • HANS K9011-BLK Hans Device Gel Padding, Black
    HANS K9011-BLK Hans Device Gel Padding, Black
    (Part #4519011)
    x
                
    • Accessory gel padding for HANS Devices.
    • Includes two shoulder pads.
    • Fits medium and large devices only. 
    • Soft medical gel pad provides added comfort.

    NOTE: These items will only be shipped to an address in the US, Canada and Mexico.

  • HANS Pro Series Post Anchor Kit
    HANS Pro Series Post Anchor Kit
    (Part #451212)
    x
                
    • Set of two professional HANS helmet anchors.
    • As furnished with all professional HANS Devices.
    • Converts one helmet for use with a HANS Device.
    NOTE: These items will only be shipped to an address in the US, Canada and Mexico.

     

  • HANS DK12034-311 Adjustable Hans Device, Post Anchor, SAH, Medium
    HANS DK12034-311 Adjustable Hans Device, Post Anchor, SAH, Medium
    (Part #451123431)
    x
                The HANS Adjustable™ provides award-winning HANS performance in any type of car.
    • Adjustable angle from 10 to 40 degrees fits all types of cars and seats
    • Easy to adjust in 5 degree increments – providing more comfort
    • Sliding tether
    • Post Anchor clips
    • SAH hardware (No nutwashers with SAH hardware)
    • Weight: 970 grams
    • Size: Medium

    Frequently Asked Questions (PDF)

    Altering The Angles (PDF)

  • HANS NAK12044-31 Adjustable Hans Device-Post Anchor, Large, No Anchors
    HANS NAK12044-31 Adjustable Hans Device-Post Anchor, Large, No Anchors
    (Part #45122443)
    x
                The HANS Adjustable™ provides award-winning HANS performance in any type of car. These anchor-free kits allow you to save big by utilizing your existing Hans helmet anchors! 
    • Adjustable angle from 10 to 40 degrees fits all types of cars and seats
    • Easy to adjust in 5 degree increments – providing more comfort
    • Sliding tether
    • Accepts Post Anchor clips
    • Post Anchors NOT included
    • Weight: 970 grams
    • Size: Large

    Frequently Asked Questions (PDF)

    Altering The Angles (PDF)

  • HANS Device Sport I, Quick Click Sliding Tether, Professional
    HANS Device Sport I, Quick Click Sliding Tether, Professional
    (Part #4511141)
    x
                
    • Replacement sliding tether for Quick Click type of helmet anchors
    • Includes 2 tether carriers and 4 screws
    • 3 lengths: Short 17", Standard 18", Long 19"
    • Standard 18" length works in most applications
    • All tether lengths offer the same level of protection
  • Hans DK 11213.321 20 Youth Sport II PA SA Head and Neck Restraint
    Hans DK 11213.321 20 Youth Sport II PA SA Head and Neck Restraint
    (Part #451121332)
    x
                Please view the product's page for more information
            
  • HANS Device Post And Anchor Sliding Tether, Sport II
    HANS Device Post And Anchor Sliding Tether, Sport II
    (Part #45111313)
    x
                
    • Replacement sliding tether for post anchor and post collar type of helmet anchors
    • Includes 2 tether carriers and 4 screws
    • 3 lengths: Short 17", Standard 18", Long 19"
    • Shorter 17" / 425mm length preferred by some smaller drivers and some using smaller size devices
    • All tether lengths offer the same level of protection
  • HANS K9005-BLK Hans Device Foam Padding, Black
    HANS K9005-BLK Hans Device Foam Padding, Black
    (Part #4519005)
    x
                
    • Replacement foam padding for HANS Devices.
    • Includes two shoulder pads.
    • Fits medium and large devices only.

    NOTE: These items will only be shipped to an address in the US, Canada and Mexico.

  • Simpson Racing Hybrid Sport Head/Neck Restraint, Sliding Tether Version
    Simpson Racing Hybrid Sport Head/Neck Restraint, Sliding Tether Version
    (Part #91072200)
    x
                

    The Hybrid Sprt is the best design yet, giving you the ultimate in safety and comfort.  This device is designed to work in all seats and with no modification, while giving you the best protection in all impacts, not just frontal.  The low top provides faster exits whether you are race dirt or asphalt, drag or off road.

     

    • Composite and Carbon Fiber Constructions
    • Minimalist Design.
    • Compact Size Under 7 Inches
    • If your helmet is currently fitted for a HANS device you can easily upgrade to a Simpson Head/Neck Restraint System that corresponds to the same space and location
    • Engineered by Trevor Ashline with Safety Solutions Technology

     

    SFI Recertification Notice

    Simpson Head and Neck Restraint Sizing Chart

  • HANS DK11131-421 Hans Device Pro w/ Quick Click Anchors, 10 Deg-Medium
    HANS DK11131-421 Hans Device Pro w/ Quick Click Anchors, 10 Deg-Medium
    (Part #451913131)
    x
                Please view the product's page for more information
            
  • HANS NAK12034-31 Medium Adjustable Hans Device-Post Anchor, No Anchors
    HANS NAK12034-31 Medium Adjustable Hans Device-Post Anchor, No Anchors
    (Part #45122343)
    x
                The HANS Adjustable™ provides award-winning HANS performance in any type of car. These anchor-free kits allow you to save big by utilizing your existing Hans helmet anchors! 
    • Adjustable angle from 10 to 40 degrees fits all types of cars and seats
    • Easy to adjust in 5 degree increments – providing more comfort
    • Sliding tether
    • Accepts Post Anchor clips
    • Anchors NOT included
    • Weight: 970 grams
    • Size: Medium

    Frequently Asked Questions (PDF)

    Altering The Angles (PDF)

  • HANS K9115 I5060 I5068 Replacement Backing Nuts w/ 2 Wrenches
    HANS K9115 I5060 I5068 Replacement Backing Nuts w/ 2 Wrenches
    (Part #4519115)
    x
                Includes:
    • HANS backing nuts (2)
    • Large nutwasher (backing nut) wrench
    • Small (collar for post anchor bolt) holding wrench
  • HANS NAK12044-41 Adjustable Hans Device-Quick Click, Large, No Anchors
    HANS NAK12044-41 Adjustable Hans Device-Quick Click, Large, No Anchors
    (Part #45122444)
    x
                The HANS Adjustable™ provides award-winning HANS performance in any type of car. These anchor-free kits allow you to save big by utilizing your existing Hans helmet anchors! 
    • Adjustable angle from 10 to 40 degrees fits all types of cars and seats
    • Easy to adjust in 5 degree increments – providing more comfort
    • Sliding tether
    • Accepts Quick Click Anchors
    • Quick Clicks NOT included
    • Weight: 970 grams
    • Size: Large

    Frequently Asked Questions (PDF)

    Altering The Angles (PDF)

  • HANS STC1121S Post Anchor Sliding Tether Upgrade Kit
    HANS STC1121S Post Anchor Sliding Tether Upgrade Kit
    (Part #45121)
    x
                Converts one HANS Device with fixed post anchors to sliding tether Vision Advantage PLUS. 

    NOTE: These items will only be shipped to an address in the US, Canada and Mexico.

  • Speedway Racing Neck Brace, SFI 3.3-1
    Speedway Racing Neck Brace, SFI 3.3-1
    (Part #910730)
    x
                
    Speedway's racing neck brace has a fire retardant cotton cover and foam inner pad to give it a SFI 3.3-1 rating. It has a velcro closure for universal fit.
    • Fire retardant cotton cover and foam inner pad
    • Velcro closure for universal fit
    • SFI 3.3-1 rated
    • Available in Red, Blue, Black, or Purple
  • HANS DK11233-321 Hans Device Sport II-20  -Medium-PA-SA-Sliding Tether
    HANS DK11233-321 Hans Device Sport II-20 -Medium-PA-SA-Sliding Tether
    (Part #451112321)
    x
                
    • Rounded collar improves fitting
    • Same performance as all HANS Device models
    • Injection molded – lighter than Sport I, heavier than Pro Series
    • New DuPont polymer reduces weight
    • For SA helmet applications only
    • Only available for 20 degrees seats
  • Hans DK 11213.311 20 Youth Sport II PA SAH Head and Neck Restraint
    Hans DK 11213.311 20 Youth Sport II PA SAH Head and Neck Restraint
    (Part #451121331)
    x
                Please view the product's page for more information
            
  • HANS Device Sport I Post & Anchor Sliding Tether, Professional
    HANS Device Sport I Post & Anchor Sliding Tether, Professional
    (Part #4511131)
    x
                
    • Replacement sliding tether for post anchor and post collar type of helmet anchors
    • Includes 2 tether carriers and 4 screws
    • 3 lengths: Short 17", Standard 18", Long 19"
    • Shorter 17" length preferred by some smaller drivers and some using smaller size devices
    • All tether lengths offer the same level of protection
  • Simpson Racing Hutchens Device Installation Kit
    Simpson Racing Hutchens Device Installation Kit
    (Part #91072016)
    x
                

    The Hutchens Device is a harness that transfers head and neck loads to the seat belts. This system is normally used in stock cars and modifieds.  This strap restraint system stays with the driver which allows easy entry and exit of car.  Easy to follow instructions show you how and where to install hardware on your helmet.

    Hutchens Device Sizing Guide

    Instruction Sheet

Goto Previous PagePrevious Page
1 2