Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 50

Products

Oval Track

Shop Oval Track At Speedway Motors

Speedway Motors has the oval track racing parts you need to take the checkered flag! Whether you race on dirt or asphalt with a stock car or an IMCA modified, Speedway is your racing equipment headquarters. Be a winner with oval track racing parts from Speedway Motors - America's Racing Super Market®!

Featured Products
  • Swedged Steel Tube for 5/8 Inch Heim
    From: $9.99
    Product Rating: 4.33 Stars
    New
    Swedged Steel Tube for 5/8 Inch Heim
    (Part #91034258)
    x
                These 5/8" swedged steel sleeves have a 7/8" O.D. tube, 0.065 wall, and 5/8" RH and LH fine threads. Available in 1" increments from 4" to 20". IMCA approved. Sold Each.
            
  • Red Line 80204 Water Wetter Coolant Additive
    Red Line 80204 Water Wetter Coolant Additive
    (Part #91015709)
    x
                

    Red Line Water Wetter Super Coolant additive is a unique wetting agent which reduces coolant temperatures by as much as 20° F. This is a liquid coolant treatment product which is designed to be added to solutions of antifreeze and water to help improve the heat transfer properties of glycol-based antifreeze. This liquid product can be used to provide rust and corrosion protection in plain water for racing engines, which provides much better heat transfer properties than glycol-based antifreeze. Improves the ability of coolant to wet heat transfer surfaces by 50%.

    • Reduces or eliminates bubbles that form on hot metal surfaces to reduce coolant temperatures by up to 20°
    • Superior heat transfer properties compared to glycol-based antifreeze
    • Compatible with new or used antifreeze (including DEX-COOL and long-life versions) to improve the heat transfer of ethylene and propylene glycol systems
    • Improves heat transfer and reduces cylinder head temperature
    • Designed for use with all modern aluminum, cast iron, copper, brass and bronze cooling systems
    • Cleans and lubricates water pump seals
    • Reduces cavitation and complexes with hard water to reduce scaling
    • Does not lower cooling system below the thermostatically-controlled temperature
    • 12 fl. oz. bottle treats 12-20 quarts

    Water Wetter Tech Info (PDF)

    Learn more about how cooling systems work with proper coolant mixture and additives by reading our tech article. Cooling System Principles.   

  • Ballast Weight Mount Tube Clamp
    Ballast Weight Mount Tube Clamp
    (Part #91045)
    x
                

    Weight mount is used to hang weight from race car. Precision machined aluminum with 1/2" bolt. Available for round tubing sizes: 1-1/4", 1-1/2", 1-3/4"; or 2" square tubing.

  • GM 19318604 CT400 GM-Sealed 604 Chevy Crate Engine, Dyno Tested
    New
    GM 19318604 CT400 GM-Sealed 604 Chevy Crate Engine, Dyno Tested
    (Part #12119318604)
    x
                
    Run up front with the 400-horsepower CT400 crate engine (often referred to as the "604 crate") featuring Fast Burn heads from GM Performance Parts. Now, Speedway Motors Racing Engines is offering this 604 crate engine as a dyno-verified package that is ready to race!
     
    These GM-sealed 604 crate engines are based on the popular Fast Burn 385 street crate engine, but include a racing-only 8-quart circle track oil pan with dual kick-out design, along with a valve cover breather kit and special "kool nut" rocker arm design. The assembly also includes an open-plenum high-rise intake manifold and 1.5:1-ratio aluminum roller rockers.
     
    The 604 crate engine includes a bulletproof bottom end, anchored by a forged steel crankshaft and hypereutectic pistons. The 23-degree, Fast Burn aluminum heads enable tremendous power in the small-block V-8 because of a unique chamber design that quickly and completely burns all of the air/fuel mixture – giving you maximum power. With the CT400 racing engine under the hood of your Modified or Late Model, you'll put a "fast burn" on the competition.
    • Dyno-verified horsepower and torque
    • Piston rings are broken-in using a proprietary dyno program
    • Lash and timing are individually tuned
    • Engine is ready to race, right out of the crate
    • GM-sealed for equal competition
    • Popular in Modified and Late Model classes*
    • 400 HP @ 5500 RPM
    • 400 ft. lbs. of torque @ 4500 RPM
    • 4.00" x 3.48" bore x stroke
    • 9.6:1 compression ratio
    • 92 octane recommended fuel
    • 4-bolt main caps
    • Cam lift: .474" intake / .510" exhaust
    • Cam duration @ .050": 208° intake / 221° exhaust
    • 112° lobe separation
    • 1.5:1 ratio aluminum roller rocker arms
    • 2.00" Intake / 1.55" Exhaust valves

    Includes:

    • Fully assembled long block
    • Black steel valve covers w/ breathers
    • Oil pump, pick-up, 8 quart oil pan
    • Eliminator Vortec intake manifold
    • Spark plugs
    • 8" harmonic balancer
    • Front timing cover
    • GM seals
    • Dyno sheet of your engine
    *Check track/series rules for approved applications.
     
  • MSD 32733 Wire Set, SC Blk, Chry. 383-440 HEI for MSD Dist.
    MSD 32733 Wire Set, SC Blk, Chry. 383-440 HEI for MSD Dist.
    (Part #54732733)
    x
                The MSD 8.5mm Super Conductor Wire is "the" performance wire.Engineered from the inside out, the 8.5 offers everything you have everwanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD 8.5mm Super Conductor Plug Wire is available in Universal Kits and Bulk Lengths.
    • Straight 3/8 Inch-24 IFF to 1/8 Inch NPT Male Adapter
      Straight 3/8 Inch-24 IFF to 1/8 Inch NPT Male Adapter
      (Part #91031831)
      x
                  

      Brass adapter.

      Straight 3/8"-24 IFF to 1/8" NPT Male Adapter

    • Speedway Chevy Universal Aluminum Radiators
      Speedway Chevy Universal Aluminum Radiators
      (Part #917347)
      x
                  

      Speedway’s line of universal Chevy radiators makes it easy for budget-minded racers to get a professional-quality aluminum racing radiator. These high performance radiators feature furnace-brazed construction, two rows of large 1" aluminum tubes, billet filler necks and a maximum number of fins per inch for great heat transfer. They are not available with transmission coolers and they do not come with mounting brackets.

      These Chevy-style radiators have driver’s side upper inlets, passenger side lower outlets, and can be ordered in a variety of custom widths.

      • All-aluminum, furnace-brazed construction
      • No cheap epoxy glue or crimped in gaskets
      • Maximum amount of fins per inch allows greater heat transfer
      • Billet filler necks
      • Available in 22", 24", 28", or 31" widths (measurements include tanks)

      Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article, Radiator Cooling Performance.

    • Winters Quick Change Gears, 10 Spline
      From: $59.99
      Product Rating: 4.67 Stars
      Winters Quick Change Gears, 10 Spline
      (Part #80285)
      x
                  
      • 8620 Steel
      • Heat Treated
      • CNC Machined
      • 10 spline
      • 1-1/4" Width

      Winters Quick Change Gear Chart

    Filter

    "Oval Track" Page 1 of 50

    Page 1 of 50

    • Wilwood 160-8747 GT 48 Curved Vane Spec 37 Iron Rotor, 12.6 Inch
      New
      Wilwood 160-8747 GT 48 Curved Vane Spec 37 Iron Rotor, 12.6 Inch
      (Part #8351608747)
      x
                  Wilwood's GT 48 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with our proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest, vibration free performance at any speed. These rotors provide the highest cooling capacity and longest service life for extreme braking short tracks and road course competition.
      • Spec-37 Heavy wall Castings
      • Suitable for moderate temperature racing to street use.
    • Wilwood 160-12292 GT 36 Curved Vane Spec 37 Iron Rotor, 12.19 Inch
      New
      Wilwood 160-12292 GT 36 Curved Vane Spec 37 Iron Rotor, 12.19 Inch
      (Part #83516012292)
      x
                  Wilwood's GT 36 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with our proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest braking available.
      • Spec-37 Heavy wall Castings
      • Suitable for high temperature racing to street use.
    • Wilwood 160-11837-B GT 48 Curved Vane Spec 37 Iron Rotor, 11.75 Inch
      New
      Wilwood 160-11837-B GT 48 Curved Vane Spec 37 Iron Rotor, 11.75 Inch
      (Part #83516011837B)
      x
                  Wilwood's GT 48 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with our proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest, vibration free performance at any speed. These rotors provide the highest cooling capacity and longest service life for extreme braking short tracks and road course competition.
      • Spec-37 Heavy wall Castings
      • Suitable for high temperature racing to street use.
    • Wilwood 160-2979 GT 48 Curved Vane Spec 37 Iron Rotor, 12.72 Inch
      New
      Wilwood 160-2979 GT 48 Curved Vane Spec 37 Iron Rotor, 12.72 Inch
      (Part #8351602979)
      x
                  Wilwood's GT 48 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with our proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest, vibration free performance at any speed. These rotors provide the highest cooling capacity and longest service life for extreme braking short tracks and road course competition.
      • Spec-37 Heavy wall Castings
      • Suitable for moderate temperature racing to street use.
    • Wilwood 160-7100 SRP 30 Vane Iron Rotor, 11 Inch
      New
      Wilwood 160-7100 SRP 30 Vane Iron Rotor, 11 Inch
      (Part #8351607100)
      x
                  SRP Drilled Performance Rotors feature a specially engineered directional cross drill and face slot pattern that improve brake response and pad performance throughout the entire range of light to heavy braking. The venting and cleaning action of the holes and slots will reduce pad glaze and disperse gasses and heat generated during the pad to rotor interface. The holes and slots also inhibit irregular pad compound build-up on the rotor faces resulting in smoother engagement and improved pedal response in all conditions. The material removed also contributes to lower rotating and unsprung suspension weight.
      • Premium grade, medium weight castings.
      • Suitable for moderate temperature racing to street use.
      • For ultimate durability in racing use comparable ULHP or GT rotors.
    • Painless Wiring 50302 6-Switch Fused Panel with Wiring and Hardware
      New
      Painless Wiring 50302 6-Switch Fused Panel with Wiring and Hardware
      (Part #91050302)
      x
                  

      This heavy duty lightweight switch panel from Painless Performance is designed to mount to a roll bar using standard metal hose clamps. Lighted rocker switches are color coded for quick reference.  All of the circuits are individually fused and are easily accessible for quick testing and replacement. This kit comes complete with 18 ft. of TXL wire, using fully insulated terminals. Made in the USA!

      Installation Instructions (PDF) 

      The Kit Controls:

      • Start
      • Ignition
      • Fuel pump
      • Electric fan/water pump (Switch up position - fan on only / Switch middle position - all off / Switch down position - fan & water pump on)
      • Two accessories

       

       

    • Torque Converter, TH350, 3500+ RPM Stall 10 Inch
      New
      Torque Converter, TH350, 3500+ RPM Stall 10 Inch
      (Part #109617)
      x
                  

      This 10" Torque Converter is designed for use in light cars where other stall converters may still be too "tight." This torque converter has a painted finish and is sold individually. 

      • 10" Converter
      • For GM TH350 transmission
      • 3500+ RPM stall
      • Sold Individually 

      To learn about how torque converters work and what to consider when purchasing one, check out our tech article. Choosing the Right Torque Converter. 

       

    • Wilwood 160-11839-B GT 48 Curved Vane Spec 37 Iron Rotor, 12.19 Inch
      New
      Wilwood 160-11839-B GT 48 Curved Vane Spec 37 Iron Rotor, 12.19 Inch
      (Part #83516011839B)
      x
                  Wilwood's GT 48 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with our proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest, vibration free performance at any speed. These rotors provide the highest cooling capacity and longest service life for extreme braking short tracks and road course competition.
      • Spec-37 Heavy wall Castings
      • Suitable for high temperature racing to street use.
    • Wilwood 15A-5740K 9725 PolyMatrix A Brake Pad Set, .98 Inch Thick
      New
      Wilwood 15A-5740K 9725 PolyMatrix A Brake Pad Set, .98 Inch Thick
      (Part #83515A5740K)
      x
                  
      • Ultimate high friction pad with aggressive initial response
      • Immediate low tempeature response.
      • Low wear rate
      • Ultimate high friction pad with aggressive initial response
      • Immediate cold response with highest friction values at all temperatures.
      • Severe duty use on oval tracks, road courses, and other applications that require immediate high torque response.
      • Long wear rate for sustained high heat braking.
      • Compatible with all iron and steel rotors.

      Compound Data Sheet (PDF)

    • Bell Helmet HP7 Advanced Series Carbon Fiber Racing Helmet
      New
      Bell Helmet HP7 Advanced Series Carbon Fiber Racing Helmet
      (Part #210973)
      x
                  Please view the product's page for more information
              
    • Wilwood 160-7106-BK SRP-BLK 32 Vane Iron Rotor, 12.19 Inch
      New
      Wilwood 160-7106-BK SRP-BLK 32 Vane Iron Rotor, 12.19 Inch
      (Part #8351607106BK)
      x
                  SRP Drilled Performance Rotors feature a specially engineered directional cross drill and face slot pattern that improve brake response and pad performance throughout the entire range of light to heavy braking. The venting and cleaning action of the holes and slots will reduce pad glaze and disperse gasses and heat generated during the pad to rotor interface. The holes and slots also inhibit irregular pad compound build-up on the rotor faces resulting in smoother engagement and improved pedal response in all conditions. The material removed also contributes to lower rotating and unsprung suspension weight.
      • Premium grade, medium weight castings.
      • Suitable for moderate temperature racing to street use.
      • For ultimate durability in racing use comparable ULHP or GT rotors.
    • 1964-1972 GM A-Body Rear Sway Bar Kit, 7/8 Inch
      1964-1972 GM A-Body Rear Sway Bar Kit, 7/8 Inch
      (Part #113692)
      x
                  

      These rear sway bars are designed as a performance replacement upgrade for your classic GM muscle car.  They feature a 7/8" diameter solid steel bar and come with all hardware needed for a successful installation. If your A-Body came with an anti-sway bar from the factory, chances are this kit will be a direct replacement. If it did not, a small amount of drilling will be required for installation of the sway bar kit.

      • Achieve flatter cornering
      • Complements front sway bar to reduce understeer and gain more neutral handing
      • Adds to cornering stability at speed
      • Solid steel 7/8" diameter bar
      • Includes polyurethane bushings for increased responsiveness
      • Black powder coated finish
      • Corrosion resistant zinc plated hardware included

      Fits:

      • 1964-1972 Buick Skylark (with O.E. replacement , rear only)
      • 1964-1977 Chevrolet Chevelle, Malibu and El Camino
      • 1964-1977 Oldsmobile Cutlass Supreme, F-85, 442 (with 883 or 709 front with O.E. replacement, rear only)

       

    • Moroso 22640 3-Vane Vacuum Pump, Original Design
      New
      Moroso 22640 3-Vane Vacuum Pump, Original Design
      (Part #54522640)
      x
                  This 3-vane vacuum pump has a versatile billet aluminum design. Its engineered vane material allows for improved efficiency and wear.
      • Versatile Billet aluminum design
      • Achieves greater vacuum sooner
      • Engineered vane material for improved efficiency and wear
      • 4.150" O.D. body, 5.050" from back of pump to pulley mounting flange
      • Completely rebuildable in 15 minutes
      • Mounting bracket not included
      • 6500 max pump rpm

      Assembly Instructions (PDF)

       

    • Sway Bar End Link Kit, 5 Inch
      $11.99
      $18.99
      Sway Bar End Link Kit, 5 Inch
      (Part #113016)
      x
                  

      These sway bar end link kits come with all necessary hardware for a successful installation. They are designed with durable polyurethane bushings and steel material so you know that you are getting a quality kit.

      • Sold as Kit
      • 5" bushing to bushing working length, 8" overall length
      • Polyurethane Bushings
      • Hardware Included

       


    • Fragola 2245091-BL 45 Degree Adapter Hose End Fitting, -8 AN to -10 AN
      New
      Fragola 2245091-BL 45 Degree Adapter Hose End Fitting, -8 AN to -10 AN
      (Part #6172245091)
      x
                  
      This black 45 degree Fragola hose fitting adapter allows you to connect a -8 AN hose to a -10 AN fitting. Fragola Pro Flow Hose Ends are constructed from high quality aluminum and feature an anodized finish for a product that both looks and performs great. Works with a steel braided hose.
      • Aluminum Construction
      • Black anodized finish   
      • 45 Degree 
      • Adapts -8 AN hose to -10 AN fitting   
      • -10 AN Fitting Inlet   
      • -8 AN Hose Outlet  
    • Classic Instruments SN35T11 Fuel Sender Tube, 11 Inch, 240-33 OHM
      New
      Classic Instruments SN35T11 Fuel Sender Tube, 11 Inch, 240-33 OHM
      (Part #2751034)
      x
                  

      Classic Instruments Tube Fuel Level Senders are perfect for applications where swing arm senders won't fit due to issues with clearance. These Tube Fuel Senders also provide a more accurate reading than swing arm senders. Compatible with both both gasoline and diesel fuels.

      • 240-33 OHM
      • 11 Inch Length 
      • Compatible with both gasoline and diesel
      • Compatible with fuels with up to 10 percent Ethanol
    • Painless Wiring 50305 6-Switch Rocker Circuit Breaker Panel
      New
      Painless Wiring 50305 6-Switch Rocker Circuit Breaker Panel
      (Part #91050305)
      x
                  

      Check out this 6-switch Rocker circuit breaker panel from Painless Performance. It features color coded lighted rocker switches, 18 feet of TXL wire, vibration resistant terminals and a black finish for reduced glare.

      • Features circuit breakers in place of standard fuses
      • Panel controls: Start, ignition, fuel pump, electric fan/water pump and 2 accessories
      • Made in the USA

      Assembly Instructions (PDF)

    • Painless 70956 1/8 Inch ClassicBraid Wire Sleeving, 20 Feet
      New
      Painless 70956 1/8 Inch ClassicBraid Wire Sleeving, 20 Feet
      (Part #91070956)
      x
                  

      This ClassicBraid has a smooth texture and appearance that will transform your engine bay and give you that factory installed look. Its tight woven construction gives you an excellent blockade against mud and dirt while keeping adequate drainage for optimum wiring protection. 

      • Made in the USA
      • Continuous Temperature Rating -94° to 257°F
      • Melting Point 482°F
      • Resistant to Automotive Chemicals & Fluids
      • Great For Auto, Marine, RV, Aircraft, Power Sports, & More
      • 20' long
    • Fragola 231807-BL 180 Degree Adapter Hose End Fitting, -8 AN to -6 AN
      New
      Fragola 231807-BL 180 Degree Adapter Hose End Fitting, -8 AN to -6 AN
      (Part #6172318071)
      x
                  

      This black 180 degree Fragola hose fitting adapter allows you to connect a -6 AN hose to a -8 AN fitting. Fragola Pro Flow Hose Ends are constructed from high quality aluminum and feature an anodized finish for a product that both looks and performs great. Works with a steel braided hose.

      • Aluminum Construction
      • Black anodized finish
      • 180 Degree
      • Adapts -6 AN hose to -8 AN fitting
      • -8 AN Fitting Inlet
      • -6 AN Hose Outlet 
      To learn more about our AN fittings, be sure to check out our tech articles; Fasteners - Brake, AN and Pipe Thread Fittings  and
      How to Assemble Push-On Hose Ends                                                                                           &nbs
    • Fragola 231813 180 Degree Adapter Hose End Fitting, -16 AN to -12 AN
      New
      Fragola 231813 180 Degree Adapter Hose End Fitting, -16 AN to -12 AN
      (Part #617231813)
      x
                  

      This 180 degree Fragola hose fitting adapter allows you to connect a -16 AN hose to a -12 AN fitting. Fragola Pro Flow Hose Ends are constructed from high quality aluminum and feature a red/blue anodized finish for a product that both looks and performs great. Works with a steel braided hose.

      • 180 Degree
      • Red/Blue anodized finish
      • Aluminum Construction
      • Adapts -16 AN hose to -12 AN fitting 
      • Works with steel braided hose

       

    Goto Previous PagePrevious Page
    1 2 3 4 5 ... 50