Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 50

Products

Oval Track

Shop Oval Track At Speedway Motors

Speedway Motors has the oval track racing parts you need to take the checkered flag! Whether you race on dirt or asphalt with a stock car or an IMCA modified, Speedway is your racing equipment headquarters. Be a winner with oval track racing parts from Speedway Motors - America's Racing Super Market®!

Featured Products
  • Swedged Steel Tube for 5/8 Inch Heim
    From: $9.99
    Product Rating: 4.33 Stars
    New
    Swedged Steel Tube for 5/8 Inch Heim
    (Part #91034258)
    x
                These 5/8" swedged steel sleeves have a 7/8" O.D. tube, 0.065 wall, and 5/8" RH and LH fine threads. Available in 1" increments from 4" to 20". IMCA approved. Sold Each.
            
  • Painless Wiring 70207 CirKit Boss Auxiliary Fuse Block, 7 Circuits, Weatherproof
    New
    Painless Wiring 70207 CirKit Boss Auxiliary Fuse Block, 7 Circuits, Weatherproof
    (Part #91070207)
    x
                

    Check out this 7-circuit CirKit Boss Auxiliary Fuse Block from Painless Wiring. It is the first circuit isolator system available with both constant and ignition hot circuit kits.

    • Protects your OEM warranty and is easy to install
    • Provides three 20 Amp constant hot and four ignition hot circuits with a maximum total amperage handling of 40 Amps
    • Made in the USA
    • Sold as Kit 

    Assembly Instructions (PDF)

    This kit includes:

    • One weatherproof 40 Amp SPST relay
    • One weatherproof 50 Amp circuit breaker
    • Weatherproof relay base/fuse block with harness
    • Weatherproof crimp-on heat-shrinkable terminals
    • Weatherproof fuse block cover
    • Mounting hardware

     

  • Red Line 80204 Water Wetter Coolant Additive
    Red Line 80204 Water Wetter Coolant Additive
    (Part #91015709)
    x
                

    Red Line Water Wetter Super Coolant additive is a unique wetting agent which reduces coolant temperatures by as much as 20° F. This is a liquid coolant treatment product which is designed to be added to solutions of antifreeze and water to help improve the heat transfer properties of glycol-based antifreeze. This liquid product can be used to provide rust and corrosion protection in plain water for racing engines, which provides much better heat transfer properties than glycol-based antifreeze. Improves the ability of coolant to wet heat transfer surfaces by 50%.

    • Reduces or eliminates bubbles that form on hot metal surfaces to reduce coolant temperatures by up to 20°
    • Superior heat transfer properties compared to glycol-based antifreeze
    • Compatible with new or used antifreeze (including DEX-COOL and long-life versions) to improve the heat transfer of ethylene and propylene glycol systems
    • Improves heat transfer and reduces cylinder head temperature
    • Designed for use with all modern aluminum, cast iron, copper, brass and bronze cooling systems
    • Cleans and lubricates water pump seals
    • Reduces cavitation and complexes with hard water to reduce scaling
    • Does not lower cooling system below the thermostatically-controlled temperature
    • 12 fl. oz. bottle treats 12-20 quarts

    Water Wetter Tech Info (PDF)

    Learn more about how cooling systems work with proper coolant mixture and additives by reading our tech article. Cooling System Principles.   

  • Ballast Weight Mount Tube Clamp
    Ballast Weight Mount Tube Clamp
    (Part #91045)
    x
                

    Weight mount is used to hang weight from race car. Precision machined aluminum with 1/2" bolt. Available for round tubing sizes: 1-1/4", 1-1/2", 1-3/4"; or 2" square tubing.

  • Straight 3/8 Inch-24 IFF to 1/8 Inch NPT Male Adapter
    Straight 3/8 Inch-24 IFF to 1/8 Inch NPT Male Adapter
    (Part #91031831)
    x
                

    Brass adapter.

    Straight 3/8"-24 IFF to 1/8" NPT Male Adapter

  • Speedway Chevy Universal Aluminum Radiators
    Speedway Chevy Universal Aluminum Radiators
    (Part #917347)
    x
                

    Speedway’s line of universal Chevy radiators makes it easy for budget-minded racers to get a professional-quality aluminum racing radiator. These high performance radiators feature furnace-brazed construction, two rows of large 1" aluminum tubes, billet filler necks and a maximum number of fins per inch for great heat transfer. They are not available with transmission coolers and they do not come with mounting brackets.

    These Chevy-style radiators have driver’s side upper inlets, passenger side lower outlets, and can be ordered in a variety of custom widths.

    • All-aluminum, furnace-brazed construction
    • No cheap epoxy glue or crimped in gaskets
    • Maximum amount of fins per inch allows greater heat transfer
    • Billet filler necks
    • Available in 22", 24", 28", or 31" widths (measurements include tanks)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article, Radiator Cooling Performance.

  • Winters Quick Change Gears, 10 Spline
    From: $59.99
    Product Rating: 4.67 Stars
    Winters Quick Change Gears, 10 Spline
    (Part #80285)
    x
                
    • 8620 Steel
    • Heat Treated
    • CNC Machined
    • 10 spline
    • 1-1/4" Width

    Winters Quick Change Gear Chart

  • Speedway Weld-In Battery Box
    $19.99
    Product Rating: 4.59 Stars
    Speedway Weld-In Battery Box
    (Part #91666006)
    x
                Weld-in style 16 gauge steel battery box. Holds a 10-3/4" x 7" battery.
            

Filter

"Oval Track" Page 1 of 50

Page 1 of 50

  • System 1 Filtration Short Replacement Filter Element 4 Inch 45 Micron
    New
    System 1 Filtration Short Replacement Filter Element 4 Inch 45 Micron
    (Part #696100360)
    x
                

    By simply replacing and/or cleaning your filter elements regularly, you can avoid costly repairs to your fuel system and ensure peak engine performance. Check out this short 4 inch replacement element from System 1 Filtration.

    • Short 4" replacement element
    • 45 micron 
    • Sold Individually

     

  • Wilwood 160-8747 GT 48 Curved Vane Spec 37 Iron Rotor, 12.6 Inch
    New
    Wilwood 160-8747 GT 48 Curved Vane Spec 37 Iron Rotor, 12.6 Inch
    (Part #8351608747)
    x
                Wilwood's GT 48 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with our proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest, vibration free performance at any speed. These rotors provide the highest cooling capacity and longest service life for extreme braking short tracks and road course competition.
    • Spec-37 Heavy wall Castings
    • Suitable for moderate temperature racing to street use.
  • Wilwood 160-12292 GT 36 Curved Vane Spec 37 Iron Rotor, 12.19 Inch
    New
    Wilwood 160-12292 GT 36 Curved Vane Spec 37 Iron Rotor, 12.19 Inch
    (Part #83516012292)
    x
                Wilwood's GT 36 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with our proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest braking available.
    • Spec-37 Heavy wall Castings
    • Suitable for high temperature racing to street use.
  • Wilwood 160-11837-B GT 48 Curved Vane Spec 37 Iron Rotor, 11.75 Inch
    New
    Wilwood 160-11837-B GT 48 Curved Vane Spec 37 Iron Rotor, 11.75 Inch
    (Part #83516011837B)
    x
                Wilwood's GT 48 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with our proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest, vibration free performance at any speed. These rotors provide the highest cooling capacity and longest service life for extreme braking short tracks and road course competition.
    • Spec-37 Heavy wall Castings
    • Suitable for high temperature racing to street use.
  • Wilwood 160-2979 GT 48 Curved Vane Spec 37 Iron Rotor, 12.72 Inch
    New
    Wilwood 160-2979 GT 48 Curved Vane Spec 37 Iron Rotor, 12.72 Inch
    (Part #8351602979)
    x
                Wilwood's GT 48 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with our proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest, vibration free performance at any speed. These rotors provide the highest cooling capacity and longest service life for extreme braking short tracks and road course competition.
    • Spec-37 Heavy wall Castings
    • Suitable for moderate temperature racing to street use.
  • Wilwood 160-7100 SRP 30 Vane Iron Rotor, 11 Inch
    New
    Wilwood 160-7100 SRP 30 Vane Iron Rotor, 11 Inch
    (Part #8351607100)
    x
                SRP Drilled Performance Rotors feature a specially engineered directional cross drill and face slot pattern that improve brake response and pad performance throughout the entire range of light to heavy braking. The venting and cleaning action of the holes and slots will reduce pad glaze and disperse gasses and heat generated during the pad to rotor interface. The holes and slots also inhibit irregular pad compound build-up on the rotor faces resulting in smoother engagement and improved pedal response in all conditions. The material removed also contributes to lower rotating and unsprung suspension weight.
    • Premium grade, medium weight castings.
    • Suitable for moderate temperature racing to street use.
    • For ultimate durability in racing use comparable ULHP or GT rotors.
  • Painless Wiring 50302 6-Switch Fused Panel with Wiring and Hardware
    New
    Painless Wiring 50302 6-Switch Fused Panel with Wiring and Hardware
    (Part #91050302)
    x
                

    This heavy duty lightweight switch panel from Painless Performance is designed to mount to a roll bar using standard metal hose clamps. Lighted rocker switches are color coded for quick reference.  All of the circuits are individually fused and are easily accessible for quick testing and replacement. This kit comes complete with 18 ft. of TXL wire, using fully insulated terminals. Made in the USA!

    Installation Instructions (PDF) 

    The Kit Controls:

    • Start
    • Ignition
    • Fuel pump
    • Electric fan/water pump (Switch up position - fan on only / Switch middle position - all off / Switch down position - fan & water pump on)
    • Two accessories

     

     

  • Torque Converter, TH350, 3500+ RPM Stall 10 Inch
    New
    Torque Converter, TH350, 3500+ RPM Stall 10 Inch
    (Part #109617)
    x
                

    This 10" Torque Converter is designed for use in light cars where other stall converters may still be too "tight." This torque converter has a painted finish and is sold individually. 

    • 10" Converter
    • For GM TH350 transmission
    • 3500+ RPM stall
    • Sold Individually 

    To learn about how torque converters work and what to consider when purchasing one, check out our tech article. Choosing the Right Torque Converter. 

     

  • Simpson Red Line Racing Shoes, SFI 3.3/5
    New
    Simpson Red Line Racing Shoes, SFI 3.3/5
    (Part #6302000)
    x
                

    These Red Line racing shoes from Simpsons feature a performance enhancing streamline design that is comfortable and pliable. These are SFI approved for racing.

    • Manufactured of top grain leather and fire retardant Nomex®
    • SFI approved
    • Hidden laces
    • Textured bumper panels
    • Single large Velcro ankle strap
    • Sizes:  6-14 includes half sizes
    • Colors: Gray on Gray with White Stitching, Gray on White with White Stitching

    Shoe Size Conversion Chart  (GIF)

    Learn more about SFI and TPP Ratings by reading our tech article. What are SFI and TPP Ratings?

  • Wilwood 160-11839-B GT 48 Curved Vane Spec 37 Iron Rotor, 12.19 Inch
    New
    Wilwood 160-11839-B GT 48 Curved Vane Spec 37 Iron Rotor, 12.19 Inch
    (Part #83516011839B)
    x
                Wilwood's GT 48 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with our proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest, vibration free performance at any speed. These rotors provide the highest cooling capacity and longest service life for extreme braking short tracks and road course competition.
    • Spec-37 Heavy wall Castings
    • Suitable for high temperature racing to street use.
  • Wilwood 15A-5740K 9725 PolyMatrix A Brake Pad Set, .98 Inch Thick
    New
    Wilwood 15A-5740K 9725 PolyMatrix A Brake Pad Set, .98 Inch Thick
    (Part #83515A5740K)
    x
                
    • Ultimate high friction pad with aggressive initial response
    • Immediate low tempeature response.
    • Low wear rate
    • Ultimate high friction pad with aggressive initial response
    • Immediate cold response with highest friction values at all temperatures.
    • Severe duty use on oval tracks, road courses, and other applications that require immediate high torque response.
    • Long wear rate for sustained high heat braking.
    • Compatible with all iron and steel rotors.

    Compound Data Sheet (PDF)

  • Bell Helmet HP7 Advanced Series Carbon Fiber Racing Helmet
    New
    Bell Helmet HP7 Advanced Series Carbon Fiber Racing Helmet
    (Part #210973)
    x
                Please view the product's page for more information
            
  • Wilwood 160-7106-BK SRP-BLK 32 Vane Iron Rotor, 12.19 Inch
    New
    Wilwood 160-7106-BK SRP-BLK 32 Vane Iron Rotor, 12.19 Inch
    (Part #8351607106BK)
    x
                SRP Drilled Performance Rotors feature a specially engineered directional cross drill and face slot pattern that improve brake response and pad performance throughout the entire range of light to heavy braking. The venting and cleaning action of the holes and slots will reduce pad glaze and disperse gasses and heat generated during the pad to rotor interface. The holes and slots also inhibit irregular pad compound build-up on the rotor faces resulting in smoother engagement and improved pedal response in all conditions. The material removed also contributes to lower rotating and unsprung suspension weight.
    • Premium grade, medium weight castings.
    • Suitable for moderate temperature racing to street use.
    • For ultimate durability in racing use comparable ULHP or GT rotors.
  • Fragola 231507 150 Degree Adapter Hose End Fitting, -6 AN to -8 AN
    New
    Fragola 231507 150 Degree Adapter Hose End Fitting, -6 AN to -8 AN
    (Part #617231507)
    x
                
    This 150 degree Fragola hose fitting adapter allows you to connect a -6 AN hose to a -8 AN female fitting. Constructed from a high quality aluminum and features a red/blue andodized finish for a product that both looks and performs great. Works with a stainless or nylon braided hose.
    • 150 Degree
    • Aluminum Construction
    • Red/Blue anodized finish
    • Adapts -6 AN hose to -8 AN female fitting
    • -8 AN female fitting inlet
    • -6 AN hose outlet
    • Works with stainless or nylon braided hose 
  • Moroso 22640 3-Vane Vacuum Pump, Original Design
    New
    Moroso 22640 3-Vane Vacuum Pump, Original Design
    (Part #54522640)
    x
                This 3-vane vacuum pump has a versatile billet aluminum design. Its engineered vane material allows for improved efficiency and wear.
    • Versatile Billet aluminum design
    • Achieves greater vacuum sooner
    • Engineered vane material for improved efficiency and wear
    • 4.150" O.D. body, 5.050" from back of pump to pulley mounting flange
    • Completely rebuildable in 15 minutes
    • Mounting bracket not included
    • 6500 max pump rpm

    Assembly Instructions (PDF)

     

  • Fragola 2245091-BL 45 Degree Adapter Hose End Fitting, -8 AN to -10 AN
    New
    Fragola 2245091-BL 45 Degree Adapter Hose End Fitting, -8 AN to -10 AN
    (Part #6172245091)
    x
                
    This black 45 degree Fragola hose fitting adapter allows you to connect a -8 AN hose to a -10 AN fitting. Fragola Pro Flow Hose Ends are constructed from high quality aluminum and feature an anodized finish for a product that both looks and performs great. Works with a steel braided hose.
    • Aluminum Construction
    • Black anodized finish   
    • 45 Degree 
    • Adapts -8 AN hose to -10 AN fitting   
    • -10 AN Fitting Inlet   
    • -8 AN Hose Outlet  
  • Classic Instruments SN35T11 Fuel Sender Tube, 11 Inch, 240-33 OHM
    New
    Classic Instruments SN35T11 Fuel Sender Tube, 11 Inch, 240-33 OHM
    (Part #2751034)
    x
                

    Classic Instruments Tube Fuel Level Senders are perfect for applications where swing arm senders won't fit due to issues with clearance. These Tube Fuel Senders also provide a more accurate reading than swing arm senders. Compatible with both both gasoline and diesel fuels.

    • 240-33 OHM
    • 11 Inch Length 
    • Compatible with both gasoline and diesel
    • Compatible with fuels with up to 10 percent Ethanol
  • Painless Wiring 50305 6-Switch Rocker Circuit Breaker Panel
    New
    Painless Wiring 50305 6-Switch Rocker Circuit Breaker Panel
    (Part #91050305)
    x
                

    Check out this 6-switch Rocker circuit breaker panel from Painless Performance. It features color coded lighted rocker switches, 18 feet of TXL wire, vibration resistant terminals and a black finish for reduced glare.

    • Features circuit breakers in place of standard fuses
    • Panel controls: Start, ignition, fuel pump, electric fan/water pump and 2 accessories
    • Made in the USA

    Assembly Instructions (PDF)

  • Painless 70956 1/8 Inch ClassicBraid Wire Sleeving, 20 Feet
    New
    Painless 70956 1/8 Inch ClassicBraid Wire Sleeving, 20 Feet
    (Part #91070956)
    x
                

    This ClassicBraid has a smooth texture and appearance that will transform your engine bay and give you that factory installed look. Its tight woven construction gives you an excellent blockade against mud and dirt while keeping adequate drainage for optimum wiring protection. 

    • Made in the USA
    • Continuous Temperature Rating -94° to 257°F
    • Melting Point 482°F
    • Resistant to Automotive Chemicals & Fluids
    • Great For Auto, Marine, RV, Aircraft, Power Sports, & More
    • 20' long
  • Fragola 231807-BL 180 Degree Adapter Hose End Fitting, -8 AN to -6 AN
    New
    Fragola 231807-BL 180 Degree Adapter Hose End Fitting, -8 AN to -6 AN
    (Part #6172318071)
    x
                

    This black 180 degree Fragola hose fitting adapter allows you to connect a -6 AN hose to a -8 AN fitting. Fragola Pro Flow Hose Ends are constructed from high quality aluminum and feature an anodized finish for a product that both looks and performs great. Works with a steel braided hose.

    • Aluminum Construction
    • Black anodized finish
    • 180 Degree
    • Adapts -6 AN hose to -8 AN fitting
    • -8 AN Fitting Inlet
    • -6 AN Hose Outlet 
    To learn more about our AN fittings, be sure to check out our tech articles; Fasteners - Brake, AN and Pipe Thread Fittings  and
    How to Assemble Push-On Hose Ends                                                                                           &nbs
Goto Previous PagePrevious Page
1 2 3 4 5 ... 50