Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 47

Products

Tools

Shop Oval Track Tools At Speedway Motors

Speedway Motors has the oval track racing parts you need to take the checkered flag! Whether you race on dirt or asphalt with a stock car or an IMCA modified, Speedway is your racing equipment headquarters. Be a winner with oval track racing parts from Speedway Motors - America's Racing Super Market!

Featured Products
  • Koul Tools 409 EZ-On Hose Press Tool
    New
    Koul Tools 409 EZ-On Hose Press Tool
    (Part #469409)
    x
                

    We have all fought putting together push-on hose ends.  Here is a tool to fix that!  The EZ-On hose press from Koul Tools is used for installing push-on fittings. The new tool will install -4 AN thru -16 AN push-on hose onto the corresponding fittings in seconds.

    • Constructed of investment cast steel
    • Installs push-on hose fittings in seconds
    • All components are fitted into a custom carrying case for safe storage and transportation
    • Designed to install push-on hose onto any angle or straight fitting
  • Speedway Air Riveter
    $49.99
    Product Rating: 4.90 Stars
    Speedway Air Riveter
    (Part #91004004)
    x
                Rivet like a pro with this heavy duty air riveter. Allows fast assembly and repair of body panels. Includes nose pieces for 3/16", 5/32", 1/8", and 3/32" pop rivets.
            
  • Cleco Fasteners, Steel, 3/16 Inch, Pack/10
    Cleco Fasteners, Steel, 3/16 Inch, Pack/10
    (Part #91004002)
    x
                

    Cleco pins are a definite must for sheet metal fabrication. They're basically spring-loaded, removable pop rivets that allow you to hold two pieces of sheet metal together in proper alignment for drilling or riveting. They work great for Circle Track use for test-fitting panels before they're permanently attached to your vehicle.

    The pins work with thicknesses of up to 1/4 in.

    Steel Cleco Fasteners

    • 3/16 Inch
    • Pack/10
  • Cam Bearing Driver
    $25.99
    Product Rating: 4.43 Stars
    Cam Bearing Driver
    (Part #91381102)
    x
                Remove and replace your S/B Chevy and 90° V6 cam bearings without damage to the bearings. 

    Note: Always remove cam bearings when boiling or cleaning block.

    913-81102 Instructions (pdf)

  • Stromberg Carburetor Jet Wrench
    Stromberg Carburetor Jet Wrench
    (Part #91081106)
    x
                This jet wrench is built to fit original Stromberg carburetor jets. Aftermarket Stromberg jets are approximately 0.011" thicker. You can lightly tap the wrench onto aftermarket jets to initially remove the jet, and then simply file the 2 flat sides until the wrench fits the jet properly. 
            
  • Speedway Deluxe Quarter Turn Fastener Tool
    Speedway Deluxe Quarter Turn Fastener Tool
    (Part #91089402)
    x
                

    Stop using a screwdriver...it doesn't fit! This tool makes fast and easy work of removing and attaching panels fastened with 1/4-turn fasteners. Great gift idea!

    Measurement Guide (Link)

  • MSD 8996 Multi-Channel Digital Ignition Tester
    MSD 8996 Multi-Channel Digital Ignition Tester
    (Part #5478996)
    x
                This Tester can be used with all of MSDs CD Ignition Controls as well as our line of DIS multi-channel ignitions. There are four points-style output wires that can be used to trigger the four channels of the DIS-4 Igni­tions, or a single channel can be used for ignitions such as the MSD 7 Series. There is also a magnetic pick-up connector for racers using an MSD Distributor or Flying Magnet Crank Trigger. The Tester is easy to connect with firm grip alli­gator style terminals and matching ends for trigger inputs. The LCD Alphanumeric readout displays the simulated rpm so you can easily confirm rev limits or the operation of an rpm-activated switch. For use on 4, 6 or 8-cylinder engines with a distributor or with coil packs.

    Installation Instructions (PDF)

    • Hand held tester generates a trigger signal to fire MSD DIS, 6, 7, 8 and 10 Series Ignition Controls and the coil
    • LCD display shows the simulated RPM and can be used to confirm the operation of rev limits, rpm activated switches, shift lights and tachometers
    • Triggers through breaker points, amplifier and magnetic pickup trigger inputs from the MSD Ignition
    • Can be used on 4, 6 and 8-cylinder engines
  • Small Block Chevy Engine Storage Stand
    Small Block Chevy Engine Storage Stand
    (Part #91681200)
    x
                

    Our handy motor stands allow installation of drives, pulleys and clutches. All four legs fold up for easy storage when stand is not in use. Stand is painted red.

    Note: Engine set up block is shown in photo for reference only and is not provided with the engine stand.

    Fits 1958-Up Small Block Chevy 283-400 engines.

Filter

"Oval Track, Tools" Page 1 of 47

Page 1 of 47

  • Head Stud Remover and Tap Alignment
    Head Stud Remover and Tap Alignment
    (Part #91081131)
    x
                

    Allows removal of stock press-in studs and aligns the tap (7/16"-14) to simplify the installation of screw in rocker studs.

    For S/B Chevy V8 engines.

  • Speedway Ultrasonic Multi-Purpose Parts Cleaner
    Speedway Ultrasonic Multi-Purpose Parts Cleaner
    (Part #91080304)
    x
                

    This ultrasonic parts cleaner is ideal for cleaning carburetor parts, fuel injector parts, small items such as wheel bearings, and other delicate components. Features a 6.6" x 5.4" x 2.5" tank size and includes a cleaning basket. 

    • Works on 110 volt power
    • Adjustable timer in 5 min. increments up to 30 mins.
    • Works well with a white vinegar solution
  • TCI 745504 Midplate Spacer Kit, 1/4 Inch Thick
    TCI 745504 Midplate Spacer Kit, 1/4 Inch Thick
    (Part #282745504)
    x
                

    TCI® Seven, Eight, Nine and Ten inch Race Torque Converters are designed to allow use with or without a midplate. The converter has the stock length nose piece. By removing the sleeve on the pilot, you can use this 1/4" extension.

    Contains:

    • 1 - Pilot Extension
    • 3 - 1/4" Washers
    • 3 - Long converter bolts

    Midplate Spacer Kit Instructions (PDF)

  • Intercomp Digital Pressure Tester
    Intercomp Digital Pressure Tester
    (Part #91381120)
    x
                

    This new pressure setting tool from Intercomp can be used for several jobs. This gauge will work from 0 to 150 psi. in 1/10th of a pound.

    Digital Pressure Tester

    • Large 1/2" back lite display.
    • Gauge features 1/10th of 1% accuracy.

    Setting Mid and High Speed bypasses
    1. Will work to set a high speed up to 150psi.
    2. Comes with a -6 AN female adapter to screw your high speed into

    Setting Tire bleeders

    1. Will work from 0 PSI up. With 1/10th of a pound increments.
    2. Comes with a female quick release fitting that fit the popular Kwick change bleeders.

  • GoJak Dollie Storage Rack
    $89.99
    GoJak Dollie Storage Rack
    (Part #880456)
    x
                

    Convenient storage cart handles up to four GoJaks® and fits all models. The cart loads and unloads in seconds and rolls easily to the job or storage area.

    Rack shown with four GoJaks®, which are not included.

  • Casters for Engine Storage Stand, Set/4
    Casters for Engine Storage Stand, Set/4
    (Part #91081139)
    x
                Casters are 3" x 1-1/4" inch wide making rolling  easier. Includes (2) swivel casters and (2) non-swivel casters. Swivel casters have double row swivel racelay. Each caster rated at  300lbs.
            
  • Wheel Rim Repair Wrench
    $20.99
    Product Rating: 4.50 Stars
    Wheel Rim Repair Wrench
    (Part #91082330)
    x
                

    This handy rim repair wrench allows you to repair your steel racing wheels for less than the cost of a new wheel.

    • Special jaw radius fits perfectly over the lip of any wheel 
    • Straightens edges of the wheel & rolls the curl back into the wheel
    • Will not crease or crack the wheel
    • Heavy duty steel construction
  • Race Track Flag Set, 3 Ft. x 3 Ft.
    Race Track Flag Set, 3 Ft. x 3 Ft.
    (Part #91079050)
    x
                100% nylon racing track flags measure 3' x 3'. Each flag is mounted on a sturdy wooden dowel. Dowels measure 4' long and 17 mm in diameter.
            
  • Wehrs Adjuster Wrench for Spring Slider
    Wehrs Adjuster Wrench for Spring Slider
    (Part #91045260)
    x
                

    These adjuster wrenches for Wehrs spring sliders are machined from quality aluminum.  They are durable and safe for use in the pits or in the shop.

    • Racing spring slider adjuster wrench
    • CNC-machined aluminum
  • POP Fasteners PS15-CS POP Hand Rivet Gun
    POP Fasteners PS15-CS POP Hand Rivet Gun
    (Part #91004010)
    x
                

    Ergonomic, jam free design with patented compound link that does the work for you. 50% easier to use than any other hand rivet tool on the market.

    • Robust aluminum casting with vanadium steel handle
    • Setting capacity: aluminum rivets up to 3/16" body diameter
    • Contoured handle grips for comfort
    • Rivet retaining handle design for one-handed riveting
    • Supplied with nosepieces for 3/32", 1/8", 5/32" & 3/16" rivets
    • Supplied nosepiece wrench
    • Length: 9.65"
    • Weight: 1.3 lbs.

    Hand Rivet Gun Instructions (PDF)

  • Race Ramps RR-FS FlatStoppers
    $249.99
    Race Ramps RR-FS FlatStoppers
    (Part #2367000)
    x
                

    FlatStoppers were developed as a solution for people having problems with tires developing flat spots when a vehicle is parked for 30 days or longer. Once tires are set on FlatStoppers (on a level surface), they settle into the pad's concave depression, which helps support more of
    the tire. This disperses the weight of the car more evenly onto the tire - helping to prevent any flat spotting. The pads measure 22.3" long x 3.5" high x 14" wide, and will accommodate tires up to 12" wide.

    FlatStoppers will not conduct heat or cold into your tires despite changing floor temperatures.

    Flatstoppers are made with the company's patented super-lightweight 100% solid construction technique - making them highly durable, virtually indestructible, and providing a 6,000 lb. vehicle weight capacity. FlatStoppers' textured coating prevents sliding across floors - including epoxy-coated floors and RaceDeck.

    FlatStoppers won't scratch or otherwise damage floors, and won't rust.

    Rebate  Feb2 - March 31 2015 (PDF) 

     

  • Heads for Grooving Iron
    $12.99
    Heads for Grooving Iron
    (Part #91082061)
    x
                

    Grooving Iron heads for grooving irons listed below.

    • 445-250 - Tru-Hot Grooving Iron
    • 445-251 - Ideal Grooving Iron
    • 910-82065 - Econ-o-siper

    Grooving Iron Replacement Heads and Blades Application Chart

  • Titan Tools 51503 Mini Tubing Bender
    $14.99
    $19.97
    Product Rating: 4.50 Stars
    Titan Tools 51503 Mini Tubing Bender
    (Part #72851503)
    x
                
    • Bends 1/8, 3/16, and 1/4" tubing up to 90 degrees
    • Use with Brass, Copper, Steel, or Aluminum
    • Compact for limited accessibility applications
  • Speedway Shock Wrench, QA1 Big Body
    $59.99
    $99.99
    Speedway Shock Wrench, QA1 Big Body
    (Part #9161000)
    x
                
    • CNC machined aluminum
    • Extra long handles for maximum leverage
  • Tire Stagger Tape, 10 Feet
    $5.99
    Tire Stagger Tape, 10 Feet
    (Part #91082015)
    x
                Stagger tape features thumb locking feature. 10' long, 1/4" wide steel tape. Use to measure tire circumference. 
            
  • Wheel Stud Drill Bit
    $9.99
    Product Rating: 3.60 Stars
    Wheel Stud Drill Bit
    (Part #91082007)
    x
                

    43/64" wheel stud drill bit with 1/2" shank. Used to drill out hubs and axle flanges for 5/8" wheel studs with .685 knurl diameter.

  • RapidAir M3800 Master Air Line Kit, 1/2 Inch Line
    RapidAir M3800 Master Air Line Kit, 1/2 Inch Line
    (Part #9103800)
    x
                These airline kits work great for your workshop with  applications from  automotive to woodworking. This is a complete  compressed air  distribution system that is designed to easily install within new walls  or on wall surfaces of existing  workshops/garages.  These kits allow  you to put air lines exactly where  you want them, just like electrical  outlets.   No more dragging hoses  across the shop to your work area.    No special tools required, simply push the flexible tubing into the  fittings and put up your system in an afternoon.
    • 1/2" line 
    • Operating pressure: 175psi at 70° F / 140psi at 140° F
    • Meets OSHA guidelines
    • Temperature range: -40° F to 140° F
    • Compatible with common compressor oils

    Kit Includes:  

    • 100 ft. of 1/2" ID Tubing
    • 3 Outlets
    • 1 Manifold
    • 5 Elbows
    • 1 Tee
    • Tools     (air chuck & filter regulator sold separately)

    Airline Installation Manual (PDF)

    RapidAir Maxline Warranty (PDF)

  • Conroy Pneu Bleeder Poppet Bleeder Kit for Winters Midget Axle
    Conroy Pneu Bleeder Poppet Bleeder Kit for Winters Midget Axle
    (Part #9501300)
    x
                Don't let centrifugal force control your bleeders. By mounting your bleeders in the center of the axle axis, these forces are eliminated and allow the bleeder to do the job it was intended to do. Also available in diaphragm style.
            
  • Clipboard with One Robic SC-505 Stopwatch and Lap Sheets
    Clipboard with One Robic SC-505 Stopwatch and Lap Sheets
    (Part #91082031)
    x
                

    Aluminum clipboard with rubber feet holds stopwatches at an angle for easy viewing. Includes one pad of timing sheets, a pen, and one Robic SC-505 stopwatch.

    Operation Instructions (PDF) 

  • RapidAir M6030 100 FT Maxline Nylon Air Hose Tubing, 3/4 Inch Diameter
    RapidAir M6030 100 FT Maxline Nylon Air Hose Tubing, 3/4 Inch Diameter
    (Part #9106030)
    x
                These airline kits work great for your workshop with  applications from    automotive to woodworking. This is just the airline for your   compressed air   distribution system that is designed to easily install  within new walls   or on wall surfaces of existing  workshops/garages.   You can put these air lines exactly where  you want them, just like  electrical   outlets.   No more dragging hoses  across the shop to your  work area.     No special tools required, simply push the flexible  tubing into your   fittings (sold separately) and put up your system in  an afternoon.
    • 3/4" line 
    • Operating pressure: 175psi at 70° F / 140psi at 140° F
    • Meets OSHA guidelines
    • Temperature range: -40° F to 140° F
    • Compatible with common compressor oils

    Includes:  

    • 100 ft. of 3/4" ID Tubing

    Airline Installation Manual (PDF)

    RapidAir Maxline Warranty (PDF)

Goto Previous PagePrevious Page
1 2 3 4 5 ... 47