Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products

Speedway Motors is your headquarters for circle track racing wheels! We stock the most popular styles and sizes of steel wheels, including any IMCA-certified wheel you might need. Speedway also carries a wide selection of beadlock wheels and wide 5 wheels, plus mud covers to fit them all. Check out our great selection of tire treatments, pressure gauges, grooving irons, tire sipers and bleed-offs too!

Featured Products
Weld Racing P650-4514A 15 Inch Mud Plug Cover
Weld Racing P650-4514A 15 Inch Mud Plug Cover
x
            

Sprint 15" mud cover by Weld. Sold each.

  • Polished aluminum
  • Weighs 1.1 lb


Has a hole in the middle for you to hold onto the cover while attaching/removing it from the wheel.

Oversize Wheel Stud, 5/8 Inch x 4 Inch Coarse, Box of 5
Oversize Wheel Stud, 5/8 Inch x 4 Inch Coarse, Box of 5
x
            

Replace those "puny" stock wheel studs with these "super-strength" oversized wheel studs.

Universal Billet Aluminum Wheel Spacer, 1/2 Inch
Universal Billet Aluminum Wheel Spacer, 1/2 Inch
x
            

Each billet aluminum wheel spacer fits 4-1/2", 4-3/4" and 5" bolt patterns. Must be used with 5/8" wheel studs to keep them properly centered.

Bassett D-Hole IMCA Approved 15 Inch Wheel, 15x8, 5 on 4-3/4, Black
Bassett D-Hole IMCA Approved 15 Inch Wheel, 15x8, 5 on 4-3/4, Black
x
            

The Bassett D-Hole 15 inch wheels has become the wheel of choice in the IMCA modified series. Lightweight yet strong. Bassett brought back the 15 x 8 D-Hole style wheel for the IMCA and asphalt markets featuring the same high quality spun-form shell as the Inertia Advantage wheel, but at a more economical price.

  • 15 Inch Wheel
  • 8 Inch Width
  • 5 on 4-3/4 Inch Bolt Pattern
  • Non-Beadlock
  • Lightweight, yet strong enough for 3500 lbs. stock cars
  • Beaded shell to prevent tires from rolling off, very durable
  • Spun-form shell provides the lowest runout on market (under .030") for better handling
  • Valve stem behind center in window

Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article. Racing Wheel Principles.

"Oval Track, Tire and Wheel" Page 1 of 25

  • Bassett 3BOLTKIT Beadlock Ring Bolt Kit, Set 18
    Bassett 3BOLTKIT Beadlock Ring Bolt Kit, Set 18
    x
                (18) Grade 8, 5/16"-18 bolts for Bassett beadlock wheels.
            
  • AERO Gen. II 15 Inch Wheel Non-Beadlock Mudcover Kit
    AERO Gen. II 15 Inch Wheel Non-Beadlock Mudcover Kit
    x
                This mudcover is designed for Aero 15”  wheels. This right front non-beadlock mudcover incorporates a round tube  that expands to fit by an adjuster nut. Three quarter turn fastener mounting pads are  welded onto the tube for the cover. Once locked into the wheel you can  attach the clear lexan cover with 1/4 turn studs.
    • Prevents heavy mud from building-up inside wheel
    • Second generation of the traditional AERO non-beadlock mudcover
    • New design fits all the way out to the outside edge of the wheel
    • 4 mounting tabs on the ring that have been moved farther inboard to provide a more solid mounting surface
    • Strength and durability were key components in the redesign
    • Kit includes outer mud cover and inner mounting ring
    • Fits 15" non-beadlock wheels
    • Available in Black, Blue, Clear, Orange, Purple, Red, Yellow, or White
  • Bassett D-Hole IMCA Approved Black 15 Inch Wheel-Non Beadlock-15x8, 5 on 5
    Bassett D-Hole IMCA Approved Black 15 Inch Wheel-Non Beadlock-15x8, 5 on 5
    x
                

    The Bassett D-Hole 15 inch wheels has become the wheel of choice in the IMCA modified series. Lightweight yet strong. Bassett brought back the 15 x 8 D-Hole style wheel for the IMCA and asphalt markets featuring the same high quality spun-form shell as the Inertia Advantage wheel, but at a more economical price.

    • 15 inch wheel
    • 5 on 5 inch bolt pattern
    • Lightweight, yet strong enough for 3500 lbs. stock cars
    • Beaded shell to prevent tires from rolling off, very durable
    • Spun-form shell provides the lowest runout on market (under .030") for better handling
    • Valve stem behind center in window

    How to Measure Bolt Circles (GIF)

    How to Measure Wheel Backspace (GIF)

  • TI64 187 Titanium Beadlock Bolt Kit, 1/4 Inch-20 x 1 Inch, Micro Sprint
    TI64 187 Titanium Beadlock Bolt Kit, 1/4 Inch-20 x 1 Inch, Micro Sprint
    x
                This 24pc kit of (12) hex flange bolts and (12)  thin steel nuts is arguably the best titanium investment for Micro  Sprint Racers. Not only do these meet our $200/lb-saved rule of thumb,  but the large rotating diameter where these bolts are applied makes for  exceptional return-on-investment in speed!
    • 12 of 1/4"-20 x 1", Hex Head Bolt
    • 12 of 1/4" AN Thin Washer, Steel
  • AERO 52 Series IMCA Certified 15 Inch Race Wheel, 5 on 5 Bolt Pattern
    AERO 52 Series IMCA Certified 15 Inch Race Wheel, 5 on 5 Bolt Pattern
    x
                This steel 15 inch wheel is our most popular 15x8 on the market today. All  center  discs are formed out of HSLA steel for strength and durability.  This wheel now has more accurate bead seats and a  lower  run-out. It includes a knife-edged bead hump and can be ordered  with an  IMCA sanctioning sticker. They DO NOT feature a beadlock.
    • Most popular 15x8 inch wheel on the market today
    • All center discs are formed out of HSLA steel for strength and durability
    • Now has more accurate bead seats and a lower run-out
    • It includes a knife-edged bead hump
    • IMCA approved
    • 19 lbs.
    • 5 on 5 inch bolt pattern
    • 2, 3, or 4" backspace
    • Available in Silver, Black, or Chrome

    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article. Racing Wheel Principles.

  • Single Sided Steel Lug Nut, 5/8 Inch RH Coarse Thread, Single Taper
    Single Sided Steel Lug Nut, 5/8 Inch RH Coarse Thread, Single Taper
    x
                

    Use these oversized 1 inch hex steel lug nuts in place of those 'puny' stock size lug nuts. You will need a 1" hex (6-sided) socket. 

    5/8" coarse thread fits most racing wheels.

    • 45° taper
    • 5/8" RH coarse thread, Single Taper

    What's The Angle
    Most racing wheels have a 45° seat for the lug nut to seat in while most street wheels use 60°. By using 45° the lug nut is able to clamp tighter over a larger area, which helps keep your wheels on the car where they belong.

    If you mix and match street and race wheels or lug nuts you are just asking for trouble. All our lug nuts are 45° and designed to be used with racing wheels.

     

  • Speedway IMCA 15 Inch Wheel 15x8, 5 on 4-3/4 Inch, Non-Beadlock
    Speedway IMCA 15 Inch Wheel 15x8, 5 on 4-3/4 Inch, Non-Beadlock
    x
                

    Speedway non-beadlock steel 15 inch wheels are IMCA approved at an affordable price. Available with 2", 3" or 4" backspace.  They do not come with a beadlock ring. These durable wheels are lightweight, yet strong enough for 3500 lbs. stock car.

    • Steel
    • 15 Inch Wheel
    • 5 on 4-3/4" bolt pattern
    • 15" x 8"
    • 20.5 lbs
    • 5/8" stud hole
    • IMCA approved
    • Non-Beadlock
    • Black painted finish
    • Durable
    • Lightweight, yet strong enough for 3500 lbs. stock car 
    • Choose: 2", 3", or 4" backspace

    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article. Racing Wheel Principles.

  • Ernst Mfg 975 Ultraflex Wheel Protector
    Ernst Mfg 975 Ultraflex Wheel Protector
    x
                

    The last thing you want is tire polish getting on your rims. Now you can throw away those home-made cardboard wheel protectors. This durable, plastic shield covers 13" to 16" rims. Simply squeeze the handle to accommodate smaller wheels, and push against the wheel to flare out for larger wheels.

  • Replacement GN Retaining Lock
    Replacement GN Retaining Lock
    x
                

    GN replacement spanner nut retaining lock.

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • 15 Inch Wheel Shell, 15 x 14
    $59.99
    15 Inch Wheel Shell, 15 x 14
    x
                

    Whether you’re restoring a vintage circle track car or just need to create a special wheel offset, Speedway offers separate steel wheel centers and shells for building custom wheels. These 15” wheel shells will accept steel centers with 12-5/8” O.D.

    • Strong steel construction for heavy-duty use
    • Bare finish can be painted after assembly
    • Standard bead bump
    • No valve stem hole
    • Welding is required to complete the wheel assembly

    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article. Racing Wheel Principles.

  • Quick Stick Wheel Weights, Reg 5 Strips
    Quick Stick Wheel Weights, Reg 5 Strips
    x
                

    Unlike others, these self adhesive weights are in 3 oz strips with 1/4 oz segments.  Regular strips are 1/2" wide while the low profile are 3/4" wide.

    Reg 5 Strips

  • Beadlock Kit for 15 Inch Wheel
    Beadlock Kit for 15 Inch Wheel
    x
                

    This bead lock kit welds to 15" steel wheel. One piece steel ring with attached threaded inserts. Complete with mounting hardware and 3/16" thick weld-on steel ring. All threaded nuts come pre-attached. Winners use these on both the inside and the outside!

    Beadlock Assembly Exploded View (GIF)

    253-1510 Instructions (PDF)

  • Bolt Circle Template
    $3.99
    Product Rating: 4.67 Stars
    Bolt Circle Template
    x
                

    This bolt circle template eliminates the need to guess what bolt pattern wheels, hubs or rear axles are. Includes 5 on 4-1/2", 5 on 4-3/4", 5 on 5" and 5 on 5-1/2".  Made of high impact plastic.

    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article. Racing Wheel Principles.

  • Aero Race Wheels 54-300002 Beadlock Mudcover Installation Kit
    Aero Race Wheels 54-300002 Beadlock Mudcover Installation Kit
    x
                

    This kit is designed to be used to install mudcovers on AERO beadlock wheels.  Stepped quarter turn springs mount easily with pop rivets.  The step is approximately 0.250". Overall height of spring is 0.400" to 0.425".  Mounting hole distance from center to center of rivet holes is 1-5/8"

    • Steel zinc finish
    • Use to install mudcover on AERO beadlock wheels
    • Includes:
      • (3) zinc plated steel 1/4 turn springs
      • (6) 1/8" aluminum pop rivets

    Measurement Guide (Link)

  • Tru-Lite Titanium Beadlock Bolt, 5/16-18 Coarse, 1-1/4 Long, 1/2 Hex
    Tru-Lite Titanium Beadlock Bolt, 5/16-18 Coarse, 1-1/4 Long, 1/2 Hex
    x
                

    Save weight and lighten your rotating mass with these full thread 5/16"-18 coarse thread x 1.25" long titanium bolts for beadlock wheel rings. Titanium has the highest strenth-to-weight ratio of any metal. This hex head titanium bolt is made from 6AL/4V material, which has 3 times the strength of aluminum and is 42% lighter than steel.

    • Coarse thread Titanium
    • Greater tensile strength than Grade 8 bolts
    • 3 times the strength of aluminum
    • 42% lighter than steel
    • 5/16"-18 x 1-1/4"
    • 1/2" Hex Head
    • Full Thread
    • Application: bead lock 

     

  • Coker Tire 85363 Tube for 5.00-16 Tire
    Coker Tire 85363 Tube for 5.00-16 Tire
    x
                
    • Made from natural rubber
    • Works with bias-ply or radial tires
    • Standard rubber valve stem
  • Wheel Center for Stock Car 15 Inch Steel Wheel, 5 on 4-1/2
    Wheel Center for Stock Car 15 Inch Steel Wheel, 5 on 4-1/2
    x
                

    Whether you’re restoring a vintage circle-track car or just need to create a special wheel offset, Speedway offers separate steel wheel centers and rims for building custom wheels. Centers have a 12-5/8" O.D. and fit 15" shells.

    • Strong 1/4” stamped steel construction for racing use
    • Bare finish can be painted after assembly
    • Welding is required to complete the wheel assembly

    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article. Racing Wheel Principles.

  • Steel Valve Stems - Set of 4
    $11.99
    Product Rating: 2.50 Stars
    Steel Valve Stems - Set of 4
    x
                Bolt-in steel cap valve stems. Most steel racing wheels  use the larger diameter .625 valve stems. The bolt-in stems come with  gaskets to fit both .453 and .625 diameter rim holes. Sold in sets of four.
            
  • Trailer Wheel Stop
    $11.99
    Product Rating: 4.50 Stars
    Trailer Wheel Stop
    x
                

    Diamond plate aluminum stops. Prevents car from rolling into tool box, tire rack, etc.

    Sold each.

  • Moroso 41090 Vacuum Line Cap Kit - 20pc
    Moroso 41090 Vacuum Line Cap Kit - 20pc
    x
                
    • Convenient kit provides a quick, sure way to seal vacuum line connections at carburetors, manifolds, etc. when vacuum lines have been removed
    • Kit consists of color-coded soft plastic caps in quantities and inside dimensions as follows: Two 1/8", six 3/16", six 1/4", two 5/16" and four 3/8"
  • Oversize 5/8 Inch Coarse Wheel Stud - Short Knurl
    Oversize 5/8 Inch Coarse Wheel Stud - Short Knurl
    x
                

    Replace those "puny" stock wheel studs with these "super-strength" oversized wheel studs.  Overall length is 3" and 1-3/4"thread length.

  • Universal Billet Aluminum Wheel Spacer, 1 Inch
    Universal Billet Aluminum Wheel Spacer, 1 Inch
    x
                

    Each billet aluminum wheel spacer fits 4-1/2", 4-3/4" and 5" bolt patterns. Must be used with 5/8" wheel studs to keep them properly centered.

  • 15 Inch Outer Beadlock Ring Only with Bolts
    15 Inch Outer Beadlock Ring Only with Bolts
    x
                

    Replacement outer ring for 15" steel wheel bead lock kit 2531510. Complete with mounting hardware.

    Beadlock Assembly Exploded View (GIF)

    253-1510 Instructions (PDF)

  • Double Sided Steel Lug Nut, 5/8 Inch RH Coarse Thread, Double Taper
    Double Sided Steel Lug Nut, 5/8 Inch RH Coarse Thread, Double Taper
    x
                

    Use these oversized 1 Inch Hex Steel lug nuts in plane of those 'puny' stock size lug nuts.  Double-sided 45° seat design for quick and secure fastening.

    You will need a 1" hex (6-sided) socket. 

    5/8" Coarse Thread fits most racing wheels.

    • 45° taper
    • 5/8" RH Coarse Thread, Double Taper

    What's The Angle
    Most racing wheels have a 45° seat for the lug nut to seat in while most street wheels use 60°. By using 45° the lug nut is able to clamp tighter over a larger area, which helps keep your wheels on the car where they belong.

    If you mix and match street and race wheels or lug nuts you are just asking for trouble. All our lug nuts are 45° and designed to be used with racing wheels.

     

  • Speedway IMCA Approved 15 Inch Wheel, 15x8, 5 on 5, Non-Beadlock
    Speedway IMCA Approved 15 Inch Wheel, 15x8, 5 on 5, Non-Beadlock
    x
                

    Speedway IMCA approved non-beadlock 15 inch wheels at an affordable price. This 5 on 5 inch wheel weighs 20.5 pounds. They do not come with a beadlock ring. These durable wheels are lightweight, yet strong enough for 3500 lbs. stock car.

    • Steel
    • 15 Inch Wheel
    • 5 on 5" bolt pattern
    • 15" x 8"
    • Weigh 20.5lbs
    • 5/8" stud hole
    • IMCA approved
    • Non-Beadlock
    • Black painted finish
    • Durable
    • Lightweight, yet strong enough for 3500 lbs. stock car 
    • Choose: 2", 3", or 4" backspace
    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article. Racing Wheel Principles.
  • Universal Billet Aluminum Wheel Spacer, 1/2 Inch
    Universal Billet Aluminum Wheel Spacer, 1/2 Inch
    x
                

    Each billet aluminum wheel spacer fits 4-1/2", 4-3/4" and 5" bolt patterns. Must be used with 5/8" wheel studs to keep them properly centered.

  • Bassett Racing Wheels 50LS Replacement Beadlock Ring, Silver
    Bassett Racing Wheels 50LS Replacement Beadlock Ring, Silver
    x
                Bassett replacement beadlock ring for 15" wheel.
            
  • Speedway Single Sided Steel Lug Nut, 1/2 Inch RH Fine Thread, Single Taper
    Speedway Single Sided Steel Lug Nut, 1/2 Inch RH Fine Thread, Single Taper
    x
                

    Use these oversized 1 Inch Hex Steel lug nuts in plane of those 'puny' stock size lug nuts.

    You will need a 1" hex (6-sided) socket. 

    1/2" Fine Thread fits most Ford and Mopar pattern studs.

    • 45° taper
    • 1/2" RH Fine Thread, Single Taper

    What's The Angle
    Most racing wheels have a 45° seat for the lug nut to seat in while most street wheels use 60°. By using 45° the lug nut is able to clamp tighter over a larger area, which helps keep your wheels on the car where they belong.

    If you mix and match street and race wheels or lug nuts you are just asking for trouble. All our lug nuts are 45° and designed to be used with racing wheels.

     

     

  • Bassett IMCA Certified 15 Inch Wheels, 15x8, 5 on 5, Non-Beadlock
    Bassett IMCA Certified 15 Inch Wheels, 15x8, 5 on 5, Non-Beadlock
    x
                

    Bassett IMCA approved Inertia Advantage 19 lb. steel 15 inch wheel. Chrome-like powder coated. Available with 2", 3" or 4" backspace.

    • 15 Inch Wheel
    • 8 Inch Width
    • 5 on 5 Inch Bolt Pattern
    • Patented five-spoke center design for low moment of inertia
    • Biggest bead bump allowed by IMCA
    • Spun-form rim shell for lowest runout possible
    • Lightest weight wheel allowed by IMCA
    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article. Racing Wheel Principles.

  • Black Circle Track 15 Inch Wheel, 15x7, 5 on 4 3/4, Non-Beadlock
    Black Circle Track 15 Inch Wheel, 15x7, 5 on 4 3/4, Non-Beadlock
    x
                

    15" x 7" steel wheels are available in black. Available in 2" or 3" backspace. Weight 22.75 lbs. Not IMCA certified.

    • 15 Inch Wheel
    • 7 Inch Width
    • 5 on 4-3/4 Inch Bolt Pattern
    • 22.75 lbs.
    • Non-Beadlock

    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article. Racing Wheel Principles.

     

  • Weld Wide 5 XL 15 Inch Wheel w/ Beadlock & Cover, 15 X 14, 5 Inch Offset
    Weld Wide 5 XL 15 Inch Wheel w/ Beadlock & Cover, 15 X 14, 5 Inch Offset
    x
                

    The Weld Wide 5 XL aluminum 15 inch wheel has cold drawn rim halves made from proprietary aluminum alloy, which makes them both lighter and stronger. Exclusive "roll forged" rim lip increases bead seat and keeps rim rigid and round. Forged coined lug holes are dual patterned for longevity and durability.

    • 15 Inch Wheel
    • 14 Inch Wide
    • Wide 5
    • 5 Inch Backspace

    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article. Racing Wheel Principles.

  • Speedway Foam Wheel Mud Plugs
    Speedway Foam Wheel Mud Plugs
    x
                

    Push-in high density, foam mud plugs eliminate mud build-up in your wheels. Fits snug inside a 15" wheel. Ideal for use with beadlock wheels as the beadlock ring will secure the plug inside the wheel center. Foam is 5" thick, but can be cut down to fit various wheel backspaces.

    Available in red, blue, black, purple, orange or yellow.

  • Single Sided Metric Lug Nut, 1 Inch Hex
    Single Sided Metric Lug Nut, 1 Inch Hex
    x
                Finally a metric lug nut that takes a 1" socket. Fits the popular 12mm x 1.5 studs and gives you the safety of a larger clamping area.

    Note: Lug nut shown here features a 90 degree included angle and should only be used with aftermarket circle track wheels. OEM wheels require a lug nut that uses a 60 degree included angle.
  • Oversize Wheel Stud, 5/8 Inch Fine
    Oversize Wheel Stud, 5/8 Inch Fine
    x
                

    Replace those "puny" stock wheel studs with these "super-strength" oversized wheel studs.

  • Universal Billet Aluminum Wheel Spacer, 1/4 Inch
    Universal Billet Aluminum Wheel Spacer, 1/4 Inch
    x
                

    Each billet aluminum wheel spacer fits 4-1/2", 4-3/4" and 5" bolt patterns. Must be used with 5/8" wheel studs to keep them properly centered.

  • Aero 50 Series DOT Certified 15 Inch Race Wheels, 5 on 4-3/4 Bolt Pattern
    Aero 50 Series DOT Certified 15 Inch Race Wheels, 5 on 4-3/4 Bolt Pattern
    x
                This steel 15 inch wheel has knife edged bead humps, maximum bead seats, low run-out  and center disc made with HSLA material. These 15x7 wheels are stamped DOT  approved for off-highway use. They DO NOT feature a beadlock.
    • Knife edged bead humps, maximum bead seats
    • Low run-out and center disc made with HSLA material
    • Stamped DOT approved for off-highway use
    • 15 inch wheels
    • 7 inch width
    • 23 lbs.
    • 5 on 4-3/4" bolt pattern
    • 3, 3-1/2, or 4" backspace
    • Available in Silver or Black

    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article. Racing Wheel Principles.

  • AERO 53 Series IMCA Certified 15 Inch Race Wheel, Beadlock, 5 on 5 Pattern
    AERO 53 Series IMCA Certified 15 Inch Race Wheel, Beadlock, 5 on 5 Pattern
    x
                

    This 5 on 5 bolt pattern, steel beadlock, 15 inch wheel comes with IMCA sticker. All center discs are made out of HSLA steel. The inner and outer rings are CNC laser cut and use 16 zinc plated flange bolts. Mudcover tabs are incorporated into the inner ring to eliminate the need for welding.

    • All center discs are made out of HSLA steel
    • Inner and outer rings are CNC laser cut and use 16 zinc plated flange bolts
    • Mudcover tabs are incorporated into the inner ring to eliminate the need for welding
    • All beadlocks include mudcover installation kits
    • IMCA approved
    • 15 inch wheel
    • 23 lbs.
    • 15 x 8"
    • 5 on 5" bolt pattern
    • 2, 3, or 4" backspace
    • Available in Silver, Black, or Chrome
    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article. Racing Wheel Principles.
  • Basset DOT Approved 15 Inch Racing Wheel, 15x7, 5 on 4-3/4, Non-Beadlock
    Garage Sale
    Basset DOT Approved 15 Inch Racing Wheel, 15x7, 5 on 4-3/4, Non-Beadlock
    x
                

    3.625" Backspace wheels are clearance priced.

     

    If you're an IMCA hobby stock or street stock racer, Bassett's DOT-approved 15 inch racing wheels are for you. These 5 on 4-3/4 bolt pattern, 15 inch wheels feature the same quality construction and high strength of our Sprint Cup/Nationwide/Camping World Truck Series certified wheel. Bassett DOT wheels are also the lightest on the market at just 23 lbs!

    Since the 15 inch wheels conform to the DOT specifications, they are legal for the street! When outfitting your car or truck with custom wheels, don't settle for lower quality knock-offs. Bassett Racing Wheels are race track tough.

    Available in a 5 on 4-3/4" bolt circle pattern with a 3", 3-5/8", or 3-3/4" backspace. Silver finish.

    These 15 inch wheels accept 5/8" studs.

    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article. Racing Wheel Principles.

  • AERO 52 Series IMCA Certified 15 Inch Race Wheel, 5 on 4-3/4 Bolt Pattern
    AERO 52 Series IMCA Certified 15 Inch Race Wheel, 5 on 4-3/4 Bolt Pattern
    x
                This steel 15 inch wheel is our most popular 15x8 wheel on the market today. All center  discs are formed out of HSLA steel for strength and durability. This 15 inch wheel now has more accurate bead seats and a lower run-out. It includes a knife-edged bead hump and can be ordered with an IMCA sanctioning sticker. They DO NOT feature a beadlock.
    • Most popular 15x8 inch wheel on the market today
    • All center discs are formed out of HSLA steel for strength and durability
    • Now has more accurate bead seats and a lower run-out
    • It includes a knife-edged bead hump
    • IMCA approved
    • 19 lbs.
    • 5 on 4-3/4 inch bolt pattern
    • 2, 3, or 4" backspace
    • Available in Silver, Black, or Chrome
    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article. Racing Wheel Principles.
  • White Circle Track 15 Inch Wheel, 15x8, 5 on 4 3/4, Non-Beadlock
    White Circle Track 15 Inch Wheel, 15x8, 5 on 4 3/4, Non-Beadlock
    x
                

    You don’t need to spend a fortune for high-quality 15 inch racing wheels. These 15” x 8” steel circle-track wheels from Speedway Motors have a 5 on 4-3/4” bolt pattern and are available with 2”, 3”, or 4” backspacing.

    • 15 Inch Wheel
    • 8 Inch Width
    • 5 on 4-3/4 Inch Bolt Pattern
    • For circle track racing applications 
    • Great value
    • Quality construction
    • Durable white powder coat finish
    • Not IMCA certified
    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article. Racing Wheel Principles.
Goto Previous PagePrevious Page
1 2 3 4 5 ... 25