Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 50

Products

Tire and Wheel

Speedway Motors is your headquarters for circle track racing wheels! We stock the most popular styles and sizes of steel wheels, including any IMCA-certified wheel you might need. Speedway also carries a wide selection of beadlock wheels and wide 5 wheels, plus mud covers to fit them all. Check out our great selection of tire treatments, pressure gauges, grooving irons, tire sipers and bleed-offs too!

Featured Products
  • Bassett 58DH475L 15x8 D-Hole 4 x 100mm 4.75 BS Black Beadlock Wheel
    New
    Bassett 58DH475L 15x8 D-Hole 4 x 100mm 4.75 BS Black Beadlock Wheel
    (Part #27858DH475L)
    x
                Bassett's 15 x 8 spun shell beadlock wheel is the only beadlock  utilizing 100% spun-form shells and rings. Spun-form shells and rings  are stronger, lighter and have less runout than roll-formed beadlock  wheels. Another important feature of the Bassett beadlock is the stepped  design of the two rings, which self-centers the tire and makes mounting a  breeze. The Bassett beadlock also uses 18 high grade bolts, which  clamps more consistently and prevents premature wear and air leaks.
            
  • Trailer Wheel Stop
    $11.99
    Product Rating: 4.67 Stars
    Trailer Wheel Stop
    (Part #91658100)
    x
                

    Diamond plate aluminum stops. Prevents car from rolling into tool box, tire rack, etc.

    Sold each.

  • Coker Tire 55665 Firestone Ribbed Front Tire, 5.00-15
    Coker Tire 55665 Firestone Ribbed Front Tire, 5.00-15
    (Part #91058640)
    x
                

    You can't lose with a set of these new Firestone tires. They are made using the original Firestone dirt track tire molds of years past, but have been redesigned using modern technology and materials.

    • 4-ply nylon construction (not a radial)
    • Can be run tubeless
    • DOT Approved
  • Single Sided Steel Lug Nut, 5/8 Inch RH Coarse Thread, Single Taper
    Single Sided Steel Lug Nut, 5/8 Inch RH Coarse Thread, Single Taper
    (Part #91003914)
    x
                

    Use these oversized 1 inch hex steel lug nuts in place of those 'puny' stock size lug nuts. You will need a 1" hex (6-sided) socket. 

    5/8" coarse thread fits most racing wheels.

    • 45° taper
    • 5/8" RH coarse thread, Single Taper

    What's The Angle
    Most racing wheels have a 45° seat for the lug nut to seat in while most street wheels use 60°. By using 45° the lug nut is able to clamp tighter over a larger area, which helps keep your wheels on the car where they belong.

    If you mix and match street and race wheels or lug nuts you are just asking for trouble. All our lug nuts are 45° and designed to be used with racing wheels.

     

  • Coker Tire 85363 Tube for 5.00-16 Tire
    Coker Tire 85363 Tube for 5.00-16 Tire
    (Part #91058646)
    x
                
    • Made from natural rubber
    • Works with bias-ply or radial tires
    • Standard rubber valve stem
  • Moroso 46200 Screw-In Wheel Studs, 1/2-20 x 3 Inch, 5 Pack
    Moroso 46200 Screw-In Wheel Studs, 1/2-20 x 3 Inch, 5 Pack
    (Part #54546200)
    x
                

    These screw-in wheel studs manufactured from Moroso Performance are made of a high strength steel. The screw-in design makes them easy to apply. These wheel studs are sold in sets of 5.

    • 1/2" -20 x 3"
    • Screw-in
    • Socket Head Cap Screw
    • Fits all aftermarket axles with 1/2" -20 threads 
    • Made in USA

    Note: Do NOT use these studs with wheel spacers!

  • Coker Tire 623048 Firestone Drag Slick, Whitewall, 1000-15
    Coker Tire 623048 Firestone Drag Slick, Whitewall, 1000-15
    (Part #91058811)
    x
                These DOT approved tubeless cheater slicks are 100% new with 4-ply nylon construction. Tires like these were the trick set-up back in the 60's, and are the perfect addition to your nostalgia street rod, rat rod or gasser. Built in new molds from original Firestone drawings. Made in the U.S.A.
            
  • Double Sided Steel Lug Nut, 5/8 Inch RH Coarse Thread, Double Taper
    Double Sided Steel Lug Nut, 5/8 Inch RH Coarse Thread, Double Taper
    (Part #91003915)
    x
                

    Use these oversized 1 Inch Hex Steel lug nuts in plane of those 'puny' stock size lug nuts.  Double-sided 45° seat design for quick and secure fastening.

    You will need a 1" hex (6-sided) socket. 

    5/8" Coarse Thread fits most racing wheels.

    • 45° taper
    • 5/8" RH Coarse Thread, Double Taper

    What's The Angle
    Most racing wheels have a 45° seat for the lug nut to seat in while most street wheels use 60°. By using 45° the lug nut is able to clamp tighter over a larger area, which helps keep your wheels on the car where they belong.

    If you mix and match street and race wheels or lug nuts you are just asking for trouble. All our lug nuts are 45° and designed to be used with racing wheels.

     

Filter

"Oval Track, Tire and Wheel" Page 1 of 50

Page 1 of 50

  • Aero 58-980530RED 58 Series 15x8 Wheel, SP, 5 on WIDE 5 BP, 3 Inch BS
    Aero 58-980530RED 58 Series 15x8 Wheel, SP, 5 on WIDE 5 BP, 3 Inch BS
    (Part #25858980530RED)
    x
                

    Aero Race Wheels 58 Series steel wheels are designed for either asphalt or dirt oval track use. The roll-formed 58 Series wheels have the largest drop center which provides more brake caliper clearance and brake cooling capabilities. They feature a 7-hole D-window center disc made of HSLA material for strength and durability. The 58 Series also include improved run-out and larger bead seats.

    • Recommended for both asphalt and dirt use
    • Designed for vehicles up to 3500 lbs.
    • Must use 1" O.D. lug nuts with 45 degree taper
    • All 58 Series have safety bead humps

    Note: These 15x8" 58 Series wheels are the same as Aero's 52 Series, only without any sanctioning body stickers.

    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article, Racing Wheel Principles.

  • Aero 55-074230 55 Series 15x7 Wheel, 4-lug, 4 on 4-1/4 BP, 3 Inch BS
    Aero 55-074230 55 Series 15x7 Wheel, 4-lug, 4 on 4-1/4 BP, 3 Inch BS
    (Part #25855074230)
    x
                

    Aero Race Wheels 55 Series steel wheels are designed for oval track use. The roll-formed 55 Series wheels have a 7-hole D-window center disc made of HSLA material for strength and durability.  They feature knife edged bead humps, maximum bead seats, and low run-out. 

    • Recommended for oval track use
    • Must use 1" O.D. lug nuts with 45 degree taper

    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article, Racing Wheel Principles.

  • Aero 58-984520RED 58 Series 15x8 Wheel, SP, 5 on 4-1/2 BP, 2 Inch BS
    Aero 58-984520RED 58 Series 15x8 Wheel, SP, 5 on 4-1/2 BP, 2 Inch BS
    (Part #25858984520RED)
    x
                

    Aero Race Wheels 58 Series steel wheels are designed for either asphalt or dirt oval track use. The roll-formed 58 Series wheels have the largest drop center which provides more brake caliper clearance and brake cooling capabilities. They feature a 7-hole D-window center disc made of HSLA material for strength and durability. The 58 Series also include improved run-out and larger bead seats.

    • Recommended for both asphalt and dirt use
    • Designed for vehicles up to 3500 lbs.
    • Must use 1" O.D. lug nuts with 45 degree taper
    • All 58 Series have safety bead humps

    Note: These 15x8" 58 Series wheels are the same as Aero's 52 Series, only without any sanctioning body stickers.

    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article, Racing Wheel Principles.

  • Aero 56-084720 56 Series 15x8 Wheel, Spun, 5 on 4-3/4 BP, 2 Inch BS
    Aero 56-084720 56 Series 15x8 Wheel, Spun, 5 on 4-3/4 BP, 2 Inch BS
    (Part #25856084720)
    x
                

    Aero Race Wheels 56 Series steel wheels are designed for dirt oval track use only. The CNC spun-formed 56 Series wheels feature a 7-hole D-window center disc made of HSLA material for strength and durability.  They are the lightest weight 15x8 in Aero's line-up, and they incorporate oversized bead seats and a bead hump with an extreme knife "edge".  These wheels are recommended if your rules require a 15x8" wheel without a beadlock and no minimum weight.

    • Recommended for dirt track use only
    • Not recommended for 2-ply sidewall tires
    • Designed for vehicles up to 3400 lbs.
    • Must use 1" O.D. lug nuts with 45 degree taper
    • All 56 Series have safety bead humps

    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article, Racing Wheel Principles.

  • Aero 58-100540 58 Series 15x10 Wheel, SP, 5 on WIDE 5 BP, 4 Inch BS
    Aero 58-100540 58 Series 15x10 Wheel, SP, 5 on WIDE 5 BP, 4 Inch BS
    (Part #25858100540)
    x
                

    Aero Race Wheels 58 Series steel wheels are designed for either asphalt or dirt oval track use. The roll-formed 58 Series wheels have the largest drop center which provides more brake caliper clearance and brake cooling capabilities. They feature a 7-hole D-window center disc made of HSLA material for strength and durability. The 58 Series also include improved run-out and larger bead seats.

    • Recommended for both asphalt and dirt use
    • Designed for vehicles up to 3600 lbs.
    • Must use 1" O.D. lug nuts with 45 degree taper
    • All 58 Series have safety bead humps

    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article, Racing Wheel Principles.

  • Aero 53-984720BLK 53 Series 15x8 Wheel, BL, 5 on 4-3/4, 2 Inch BS IMCA
    Aero 53-984720BLK 53 Series 15x8 Wheel, BL, 5 on 4-3/4, 2 Inch BS IMCA
    (Part #25853984720BLK)
    x
                

    Aero Race Wheels 53 Series steel wheels are designed for dirt oval track use only. The roll-formed 53 Series wheels feature a 7-hole D-window center disc made of HSLA material for strength and durability.  They also come with inner and outer beadlock rings that are CNC laser cut, using 16 zinc plated flange bolts.  All beadlocks include mudcover installation kits with mudcover tabs incorporated into the inner ring to eliminate the need for welding. 

    • Recommended for dirt track use only
    • Designed for vehicles up to 3500 lbs.
    • Must use 1" O.D. lug nuts with 45 degree taper
    • Standard beadlock ring is yellow

    Note: These 15x8 5-lug 53 Series wheels come with an IMCA sanctioning sticker.

    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article, Racing Wheel Principles.

  • Aero 56-185020 56 Series 15x8 Wheel, Spun, 5 on 5 Inch BP, 2 Inch BS
    Aero 56-185020 56 Series 15x8 Wheel, Spun, 5 on 5 Inch BP, 2 Inch BS
    (Part #25856185020)
    x
                

    Aero Race Wheels 56 Series steel wheels are designed for dirt oval track use only. The CNC spun-formed 56 Series wheels feature a 7-hole D-window center disc made of HSLA material for strength and durability.  They are the lightest weight 15x8 in Aero's line-up, and they incorporate oversized bead seats and a bead hump with an extreme knife "edge".  These wheels are recommended if your rules require a 15x8" wheel without a beadlock and no minimum weight.

    • Recommended for dirt track use only
    • Not recommended for 2-ply sidewall tires
    • Designed for vehicles up to 3400 lbs.
    • Must use 1" O.D. lug nuts with 45 degree taper
    • All 56 Series have safety bead humps

    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article, Racing Wheel Principles.

  • Aero 58-900530RED 58 Series 15x10 Wheel, SP, 5 on WIDE 5 BP 3 Inch BS
    Aero 58-900530RED 58 Series 15x10 Wheel, SP, 5 on WIDE 5 BP 3 Inch BS
    (Part #25858900530RED)
    x
                

    Aero Race Wheels 58 Series steel wheels are designed for either asphalt or dirt oval track use. The roll-formed 58 Series wheels have the largest drop center which provides more brake caliper clearance and brake cooling capabilities. They feature a 7-hole D-window center disc made of HSLA material for strength and durability. The 58 Series also include improved run-out and larger bead seats.

    • Recommended for both asphalt and dirt use
    • Designed for vehicles up to 3600 lbs.
    • Must use 1" O.D. lug nuts with 45 degree taper
    • All 58 Series have safety bead humps

    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article, Racing Wheel Principles.

  • Aero 56-985040PIN 56 Series 15x8 Wheel, Spun, 5 on 5 Inch, 4 Inch BS
    Aero 56-985040PIN 56 Series 15x8 Wheel, Spun, 5 on 5 Inch, 4 Inch BS
    (Part #25856985040PIN)
    x
                

    Aero Race Wheels 56 Series steel wheels are designed for dirt oval track use only. The CNC spun-formed 56 Series wheels feature a 7-hole D-window center disc made of HSLA material for strength and durability.  They are the lightest weight 15x8 in Aero's line-up, and they incorporate oversized bead seats and a bead hump with an extreme knife "edge".  These wheels are recommended if your rules require a 15x8" wheel without a beadlock and no minimum weight.

    • Recommended for dirt track use only
    • Not recommended for 2-ply sidewall tires
    • Designed for vehicles up to 3400 lbs.
    • Must use 1" O.D. lug nuts with 45 degree taper
    • All 56 Series have safety bead humps

    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article, Racing Wheel Principles.

  • Aero 53-985020BLU 53 Series 15x8 Wheel, BL, 5 on 5 BP, 2 Inch BS IMCA
    Aero 53-985020BLU 53 Series 15x8 Wheel, BL, 5 on 5 BP, 2 Inch BS IMCA
    (Part #25853985020BLU)
    x
                

    Aero Race Wheels 53 Series steel wheels are designed for dirt oval track use only. The roll-formed 53 Series wheels feature a 7-hole D-window center disc made of HSLA material for strength and durability.  They also come with inner and outer beadlock rings that are CNC laser cut, using 16 zinc plated flange bolts.  All beadlocks include mudcover installation kits with mudcover tabs incorporated into the inner ring to eliminate the need for welding. 

    • Recommended for dirt track use only
    • Designed for vehicles up to 3500 lbs.
    • Must use 1" O.D. lug nuts with 45 degree taper
    • Standard beadlock ring is yellow

    Note: These 15x8 5-lug 53 Series wheels come with an IMCA sanctioning sticker.

    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article, Racing Wheel Principles.

  • Aero 58-904740ORG 58 Series 15x10 Wheel, SP, 5 on 4-3/4, 4 Inch BS
    Aero 58-904740ORG 58 Series 15x10 Wheel, SP, 5 on 4-3/4, 4 Inch BS
    (Part #25858904740ORG)
    x
                

    Aero Race Wheels 58 Series steel wheels are designed for either asphalt or dirt oval track use. The roll-formed 58 Series wheels have the largest drop center which provides more brake caliper clearance and brake cooling capabilities. They feature a 7-hole D-window center disc made of HSLA material for strength and durability. The 58 Series also include improved run-out and larger bead seats.

    • Recommended for both asphalt and dirt use
    • Designed for vehicles up to 3600 lbs.
    • Must use 1" O.D. lug nuts with 45 degree taper
    • All 58 Series have safety bead humps

    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article, Racing Wheel Principles.

  • Aero 58-984730BLK 58 Series 15x8 Wheel, SP, 5 on 4-3/4, 3 Inch BS
    Aero 58-984730BLK 58 Series 15x8 Wheel, SP, 5 on 4-3/4, 3 Inch BS
    (Part #25858984730BLK)
    x
                

    Aero Race Wheels 58 Series steel wheels are designed for either asphalt or dirt oval track use. The roll-formed 58 Series wheels have the largest drop center which provides more brake caliper clearance and brake cooling capabilities. They feature a 7-hole D-window center disc made of HSLA material for strength and durability. The 58 Series also include improved run-out and larger bead seats.

    • Recommended for both asphalt and dirt use
    • Designed for vehicles up to 3500 lbs.
    • Must use 1" O.D. lug nuts with 45 degree taper
    • All 58 Series have safety bead humps

    Note: These 15x8" 58 Series wheels are the same as Aero's 52 Series, only without any sanctioning body stickers.

    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article, Racing Wheel Principles.

  • Aero 55-174020 55 Series 15x7 Inch Wheel, 4-lug, 4 on 4 BP, 2 Inch BS
    Aero 55-174020 55 Series 15x7 Inch Wheel, 4-lug, 4 on 4 BP, 2 Inch BS
    (Part #25855174020)
    x
                

    Aero Race Wheels 55 Series steel wheels are designed for oval track use. The roll-formed 55 Series wheels have a 7-hole D-window center disc made of HSLA material for strength and durability.  They feature knife edged bead humps, maximum bead seats, and low run-out. 

    • Recommended for oval track use
    • Must use 1" O.D. lug nuts with 45 degree taper

    Note: The 4-on-4" bolt pattern will work on 4 on 100 mm if NOT using 5/8" studs.

    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article, Racing Wheel Principles.

  • Aero 55-074035 55 Series 15x7 Inch Wheel, 4-lug, 4 on 4 BP, 3-1/2 BS
    Aero 55-074035 55 Series 15x7 Inch Wheel, 4-lug, 4 on 4 BP, 3-1/2 BS
    (Part #25855074035)
    x
                

    Aero Race Wheels 55 Series steel wheels are designed for oval track use. The roll-formed 55 Series wheels have a 7-hole D-window center disc made of HSLA material for strength and durability.  They feature knife edged bead humps, maximum bead seats, and low run-out. 

    • Recommended for oval track use
    • Must use 1" O.D. lug nuts with 45 degree taper

    Note: The 4-on-4" bolt pattern will work on 4 on 100 mm if NOT using 5/8" studs.

    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article, Racing Wheel Principles.

  • Aero 56985020LPIN 56 Series 15x8 Wheel, Spun, 5 on 5 BP, 2 Inch BS LH
    Aero 56985020LPIN 56 Series 15x8 Wheel, Spun, 5 on 5 BP, 2 Inch BS LH
    (Part #25856985020LPIN)
    x
                

    Aero Race Wheels 56 Series steel wheels are designed for dirt oval track use only. The CNC spun-formed 56 Series wheels feature a 7-hole D-window center disc made of HSLA material for strength and durability.  They are the lightest weight 15x8 in Aero's line-up, and they incorporate oversized bead seats and a bead hump with an extreme knife "edge".  These wheels are recommended if your rules require a 15x8" wheel without a beadlock and no minimum weight.

    • Recommended for dirt track use only
    • Not recommended for 2-ply sidewall tires
    • Designed for vehicles up to 3400 lbs.
    • Must use 1" O.D. lug nuts with 45 degree taper
    • All 56 Series have safety bead humps

    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article, Racing Wheel Principles.

  • Aero 56-984510GOL 56 Series 15x8 Wheel, Spun, 5 on 4-1/2, 1 Inch BS
    Aero 56-984510GOL 56 Series 15x8 Wheel, Spun, 5 on 4-1/2, 1 Inch BS
    (Part #25856984510GOL)
    x
                

    Aero Race Wheels 56 Series steel wheels are designed for dirt oval track use only. The CNC spun-formed 56 Series wheels feature a 7-hole D-window center disc made of HSLA material for strength and durability.  They are the lightest weight 15x8 in Aero's line-up, and they incorporate oversized bead seats and a bead hump with an extreme knife "edge".  These wheels are recommended if your rules require a 15x8" wheel without a beadlock and no minimum weight.

    • Recommended for dirt track use only
    • Not recommended for 2-ply sidewall tires
    • Designed for vehicles up to 3400 lbs.
    • Must use 1" O.D. lug nuts with 45 degree taper
    • All 56 Series have safety bead humps

    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article, Racing Wheel Principles.

  • Aero 56-984510ORG 56 Series 15x8 Wheel, Spun, 5 on 4-1/2, 1 Inch BS
    Aero 56-984510ORG 56 Series 15x8 Wheel, Spun, 5 on 4-1/2, 1 Inch BS
    (Part #25856984510ORG)
    x
                

    Aero Race Wheels 56 Series steel wheels are designed for dirt oval track use only. The CNC spun-formed 56 Series wheels feature a 7-hole D-window center disc made of HSLA material for strength and durability.  They are the lightest weight 15x8 in Aero's line-up, and they incorporate oversized bead seats and a bead hump with an extreme knife "edge".  These wheels are recommended if your rules require a 15x8" wheel without a beadlock and no minimum weight.

    • Recommended for dirt track use only
    • Not recommended for 2-ply sidewall tires
    • Designed for vehicles up to 3400 lbs.
    • Must use 1" O.D. lug nuts with 45 degree taper
    • All 56 Series have safety bead humps

    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article, Racing Wheel Principles.

  • Aero 58-985010BLU 58 Series 15x8 Wheel, SP, 5 on 5 Inch, 1 Inch BS
    Aero 58-985010BLU 58 Series 15x8 Wheel, SP, 5 on 5 Inch, 1 Inch BS
    (Part #25858985010BLU)
    x
                

    Aero Race Wheels 58 Series steel wheels are designed for either asphalt or dirt oval track use. The roll-formed 58 Series wheels have the largest drop center which provides more brake caliper clearance and brake cooling capabilities. They feature a 7-hole D-window center disc made of HSLA material for strength and durability. The 58 Series also include improved run-out and larger bead seats.

    • Recommended for both asphalt and dirt use
    • Designed for vehicles up to 3500 lbs.
    • Must use 1" O.D. lug nuts with 45 degree taper
    • All 58 Series have safety bead humps

    Note: These 15x8" 58 Series wheels are the same as Aero's 52 Series, only without any sanctioning body stickers.

    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article, Racing Wheel Principles.

  • Aero 58-004530 58 Series 15x10 Wheel, SP, 5 on 4-1/2 BP, 3 Inch BS
    Aero 58-004530 58 Series 15x10 Wheel, SP, 5 on 4-1/2 BP, 3 Inch BS
    (Part #25858004530)
    x
                

    Aero Race Wheels 58 Series steel wheels are designed for either asphalt or dirt oval track use. The roll-formed 58 Series wheels have the largest drop center which provides more brake caliper clearance and brake cooling capabilities. They feature a 7-hole D-window center disc made of HSLA material for strength and durability. The 58 Series also include improved run-out and larger bead seats.

    • Recommended for both asphalt and dirt use
    • Designed for vehicles up to 3600 lbs.
    • Must use 1" O.D. lug nuts with 45 degree taper
    • All 58 Series have safety bead humps

    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article, Racing Wheel Principles.

  • Aero 53984730WORG 53 Series 15x8 Wheel, BL, 5 on 4-3/4, 3 BS Wissota
    Aero 53984730WORG 53 Series 15x8 Wheel, BL, 5 on 4-3/4, 3 BS Wissota
    (Part #25853984730WORG)
    x
                

    Aero Race Wheels 53 Series steel wheels are designed for dirt oval track use only. The roll-formed 53 Series wheels feature a 7-hole D-window center disc made of HSLA material for strength and durability.  They also come with inner and outer beadlock rings that are CNC laser cut, using 16 zinc plated flange bolts.  All beadlocks include mudcover installation kits with mudcover tabs incorporated into the inner ring to eliminate the need for welding. 

    • Recommended for dirt track use only
    • Designed for vehicles up to 3500 lbs.
    • Must use 1" O.D. lug nuts with 45 degree taper
    • Standard beadlock ring is yellow

    Note: These 15x8 5-lug 53 Series wheels come with a WISSOTA sanctioning sticker.

    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article, Racing Wheel Principles.

Goto Previous PagePrevious Page
1 2 3 4 5 ... 50