Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Oval Track Electric Switches & Connectors At Speedway Motors

Find all your race car switch panels, warning lights and wiring accessories at Speedway Motors - America's Racing Super Market. Speedway Motors stocks many of the most dependable brands in the racing industry, including AFCO, Longacre and Painless Wiring. Shop now for same day shipping on these oval track racing electrical components!

"Oval Track, Switches" Page 1 of 2

  • AFCO 85053B Starter Switch Panel with Lights, 4-1/8 x 5-7/8 Inch
    AFCO 85053B Starter Switch Panel with Lights, 4-1/8 x 5-7/8 Inch
    SKU-10685053B
    x
                

    AFCO starter switch panels are for standard ignitions.

    Wiring Instructions (PDF)

  • Painless Wiring 50302 6-Switch Fused Panel with Wiring and Hardware
    New
    Painless Wiring 50302 6-Switch Fused Panel with Wiring and Hardware
    SKU-91050302
    x
                

    This heavy duty lightweight switch panel from Painless Performance is designed to mount to a roll bar using standard metal hose clamps. Lighted rocker switches are color coded for quick reference.  All of the circuits are individually fused and are easily accessible for quick testing and replacement. This kit comes complete with 18 ft. of TXL wire, using fully insulated terminals. Made in the USA!

    Installation Instructions (PDF) 

    The Kit Controls:

    • Start
    • Ignition
    • Fuel pump
    • Electric fan/water pump (Switch up position - fan on only / Switch middle position - all off / Switch down position - fan & water pump on)
    • Two accessories

     

     

  • Longacre 44611 Flip-Up Start/Ignition Switch Panel w/Pilot Light
    Longacre 44611 Flip-Up Start/Ignition Switch Panel w/Pilot Light
    SKU-47544611
    x
                These high capacity (40 amp at 12 volts) ignition switch panels with aircraft style cover and pilot light are easy to turn off in an emergency from any angle, even with gloves. Will not turn off from vibration. They come pre-wired with high insulation "Fat" wires and soldered terminals with heat shrinked seals.
    • Starter button with weatherproof cover
    • Lightweight aluminum panel
    • Plugs into Longacre wiring harness P/N 44930
    • Ignition Switch:
      • Style:    Toggle
      • Cover:    Aircraft style flip
      • Pilot Light Included:   Yes
      • Rating:    40 amps @ 12 volts
    • Starter Switch:
      • Style:    Push button
      • Cover:    Weatherproof rubber
      • Rating:    15 amps @ 12 volts resistive
    • Panel:
      • Material:    Lightweight aluminum
      • Panel Dimensions:   3-1/2" x 3-1/2"
      • Wiring Included:    Yes
  • Toggle Ignition On Switch
    $9.99
    Product Rating: 4.75 Stars
    Toggle Ignition On Switch
    SKU-91364380
    x
                Toggle switch works great as a kill switch or with other auxiliary equipment. 25 amp SPST switch with rubber boot and on/off plate.
            
  • Safety Kill Switch
    $19.99
    Product Rating: 4.50 Stars
    Safety Kill Switch
    SKU-91364384
    x
                

    This is the best kill switch we've found! Works with standard ignition only. Water resistant with O-ring shaft seal. Pull on, push off with silver contacts.

    20 amp rating at 12 VDC.

  • MSD 8812 Universal, Push Button, Alt. Action Switch
    New
    MSD 8812 Universal, Push Button, Alt. Action Switch
    SKU-5478812
    x
                This switch is designed to be used as an auxiliary ignition On/Off but­ton. It can be mounted to the steering wheel within easy reach of the driver and can be used in a Normally Open or Normally Closed position. Assembled and constructed for harsh racing conditions.

    Installation Instructions (PDF)

    • Speedway Starter Switch Panel
      Speedway Starter Switch Panel
      SKU-91364385
      x
                  

      Start your engine by flicking a switch and depressing a starter button. This starter switch panel is designed to stand up to rough racing conditions and is fully waterproof.

      • Panel measures 2-5/8" x 4-1/2"
      • Includes three 14 gauge wires (5 ft. each)

      913-64385 Instructions (PDF)

    • Keep It Clean Switch Panel
      $74.99
      Product Rating: 5.00 Stars
      Keep It Clean Switch Panel
      SKU-91029085
      x
                  
      • Push button start
      • Battery kill switch
      • 3 Heavy duty accessory toggle switches with cover
      • Aluminum mounting plate
      • Indicator lights
      • Measures 7.5" x 2.5"
    • AFCO 85005B Afco Master Disconnect Panel
      AFCO 85005B Afco Master Disconnect Panel
      SKU-10685005B
      x
                  
              
    • Longacre 44661 Flip-Up Start/Ignition Panel w/ 1 ACC and Pilot Light
      Longacre 44661 Flip-Up Start/Ignition Panel w/ 1 ACC and Pilot Light
      SKU-47544661
      x
                  These high capacity (40 amp at 12 volts) ignition switch panels with aircraft style cover and pilot light are easy to turn off in an emergency from any angle, even with gloves. Will not turn off from vibration. They come pre-wired with high insulation "Fat" wires and soldered terminals with heat shrinked seals.
      • Starter button with weatherproof cover
      • Lightweight aluminum panel
      • Plugs into Longacre wiring harness P/N 44930
      • Ignition Switch:
        • Style:    Toggle
        • Cover:    Aircraft style flip
        • Pilot Light Included:   Yes
        • Rating:    40 amps @ 12 volts
      • Starter Switch:
        • Style:    Push button
        • Cover:    Weatherproof rubber
        • Rating:    15 amps @ 12 volts resistive
      • Accessory Switch:
        • Quantity Included:    1
        • Style:    Toggle
        • Cover:    Silicon rubber
        • Pilot Lights Included:    Yes
        • Rating:    40 amps @ 12 volts
      • Panel:
        • Material:    Lightweight aluminum
        • Panel Dimensions:   3-1/2" x 3-1/2"
        • Wiring Included:    Yes
    • AFCO 85266 HD Starter Button
      $12.99
      AFCO 85266 HD Starter Button
      SKU-10685266
      x
                  Afco HD Starter Button 
              
    • AFCO 85030B Starter Switch Panel, 4-1/8 x 5-7/8 Inch
      AFCO 85030B Starter Switch Panel, 4-1/8 x 5-7/8 Inch
      SKU-10685030B
      x
                  

      AFCO starter switch panels are for standard ignitions.

      Wiring Instructions (PDF)

    • Four Post Battery Disconnect Switch
      Four Post Battery Disconnect Switch
      SKU-91064501
      x
                  

      Battery disconnect switch for safety and theft protection. Required for use with alternator cutoff by NHRA. Battery shut off switch can be remote mounted or where specified for saftey and convenience. This battery kill switch featues a die cast lever.

      Rated at 180 amp continuous, 1000 amp instantaneous.

      910-64501 Instructions (PDF)

    • Double Throw Toggle Switch
      $9.99
      Product Rating: 5.00 Stars
      Double Throw Toggle Switch
      SKU-91064016
      x
                  
      • Switch Type:  Toggle Switch
      • Circuitry:  SPDT
      • Electrical Rating:  25A at 12V DC
      • Contacts:  Silver
      • Housing:  Plastic with plated steel cap
      • Up Position:  On
      • Center Position:  Off
      • Down Position:  On
      • Terminals:  3 screw
      • Handle Material:  Nickel-plated brass
      • Handle Length:  11/16"
      • Mounting Hardware:  Nickel plated brass face and hex nut
      • Mounting Stem Material:  Nickel plated brass
      • Mounting Stem:  15/32" -32 thread, 15/32" long
      • Mounting Hole:  15/32" panel hole
      • Panel Thickness:  Up to 1/4" thick
    • Lokar 1330021 Interior Battery Disconnect Lever Kit- Vari-Mnt 125 Amp
      New
      Lokar 1330021 Interior Battery Disconnect Lever Kit- Vari-Mnt 125 Amp
      SKU-4911330021
      x
                  

      This interior battery disconnect from Lokar allows a person to turn the electrical power on/off from the drivers seat. It works in conjunction with a fire system kill switch.

      • Fits B&M Pro Ratchet, TCI Thunder Stick, TCI Outlaw, TCI Lightning, Hurst Quarter Stick, or can be floor mounted
      • Lokar vari-mount
      • 125 Amp
      • Red billet aluminum power lever
      • Made in the USA
      • Kit standard with 8' push pull cable
    • Lokar 1330012 Interior Battery Disconnect Lever Kit-Direct Mnt 300 Amp
      New
      Lokar 1330012 Interior Battery Disconnect Lever Kit-Direct Mnt 300 Amp
      SKU-4911330012
      x
                  

      This interior battery disconnect from Lokar allows you to turn the electrical power on/off from your drivers seat. It works in conjunction with your fire system kill switch.

      • Fits B&M Pro Bandit, Quarter Pro, Precision Performance Products Shifters
      • Direct Mount
      • 300 Amp
      • Red billet aluminum power lever
      • Made in the USA
      • Kit standard with 8' push pull cable
    • DPDT Momentary Toggle Switch
      $14.99
      DPDT Momentary Toggle Switch
      SKU-91364382
      x
                  

      Universal heavy duty 3-position momentary toggle switch. Features a nickel-plated brass switch, phenolic housing, and plated steel cap. Rated at 25A at 12V, 15A at 24V, and 10A at 36V DC.

      • Mounting Stem:  15/32" -32 thread, 15/32" long, and fits panels up to 9/32"
      • Six Screw Terminals:  6-32 screws
      • Electrical Rating:  25A at 12V, 15A at 24V, and 10A at 36V DC

      Works great as a linear actuator switch!

      Note: Up=Momentary On, Center=Off, Down=Momentary On.

    • Lokar 1330011 Interior Battery Disconnect Lever Kit-Direct Mnt 125 Amp
      New
      Lokar 1330011 Interior Battery Disconnect Lever Kit-Direct Mnt 125 Amp
      SKU-4911330011
      x
                  

      This interior battery disconnect lever from Lokar allows you to turn the electrical power on or off form your drivers seat. It works in conjunction with your fire system kill switch.

      • Red billet aluminum power lever
      • Fits B&M Pro Bandit, Quarter Pro, and Precision Performance Products Shifters
      • 125 Amp
      • Direct Mount
      • Made in the USA
      • Kit standard with 8' push pull cable
    • Double Throw Toggle Switch with Boot
      Double Throw Toggle Switch with Boot
      SKU-91064015
      x
                  

      Single pole, double throw. On-On configuration. Plastic housing with steel plate. Rubber boot protects switch from dirt and moisture. This toggle switch requires a 1/2" hole to mount it.

      • Three terminals
      • Two toggle positions
      • Rated for 25 amps at 12 volts DC

       

    • AFCO 85010B Afco Starter Switch Panel, 3 x 4 Inch
      AFCO 85010B Afco Starter Switch Panel, 3 x 4 Inch
      SKU-10685010B
      x
                  

      AFCO starter switch panels are for standard ignitions.

      Wiring Instructions (PDF)

    • Longacre 44897 Carbon Fiber Starter Switch Panel, Cover/Master Switch
      Longacre 44897 Carbon Fiber Starter Switch Panel, Cover/Master Switch
      SKU-47544897
      x
                  

      This composite panel is made of lightweight molded ABS featuring a carbon fiber pattern that matches Longacre's new composite gauge panels. The starter panel features a high capacity ignition switch with a aircraft style cover. The ignition switch is easy to turn off in an emergency but will not turn off from vibrations. Starter button has a rubber switch boot to seal out moisture. Manual battery disconnect switch features a bright red panel for easy disconnect during an emergency.

      • Great looking Composite Panel - Lightweight molded ABS with a carbon fiber pattern
      • Matches our new Composite Gauge Panels
      • High capacity ignition switch with weatherproof cover and pilot light
      • Starter button with rubber switch boot to seal out moisture
      • Assembled and wired, 40 amp @ 12v DC
      • Plugs into Longacre wiring harness (not included)
      • Pre-wired with high insulation 'Fat' wires and soldered terminals with heat shrink seals
      • Manual battery disconnect switch with a bright red handle
      • Easier to find in an emergency
      • Prevents battery drain
      • 175 amp continuous rating, 6-36 volt, 1000 peak
    • Painless Wiring 50202 8-Switch Panel, Non-Fused, Roll Bar Mount
      New
      Painless Wiring 50202 8-Switch Panel, Non-Fused, Roll Bar Mount
      SKU-91050202
      x
                  

      This roll bar mounted switch panel is to be used with 910-50001 wire harness. The switches that are included on this switch panel are:

      • Start
      • Ignition
      • Electric Cooling Fan
      • Fuel Pump 1
      • Fuel Pump 2
      • Electric Water Pump
      • Lights
      • Accessory 

      Installation Instructions (PDF)

    • Push Button Starter Switch
      $5.99
      Product Rating: 4.86 Stars
      Push Button Starter Switch
      SKU-91364381
      x
                  

      Momentary switch has rubber boot which protects switch from moisture. Easy install to give any classic car that hot rod feel. Features a high quality die cast zinc housing with brass terminals.

    • Painless Wiring 50406 6-Switch Lighted Panel, Non-Fused with Wiring
      New
      Painless Wiring 50406 6-Switch Lighted Panel, Non-Fused with Wiring
      SKU-91050406
      x
                  

      This 6-switch lighted non-fuse rocker switch panel with wiring from Painless Performance is made in the USA! This heavy-duty panel is pre-assembled with vibration-resistant terminals and 18 feet of TXL wire. The panel controls:

      • Start
      • Ignition Fuel Pump
      • Water Pump/Fan
      • 2 Accessories
      Installation Instructions (PDF)
       
    • Lokar 1330023 Interior Battery Disconnect Lever Kit-Vari-Mnt No Switch
      New
      Lokar 1330023 Interior Battery Disconnect Lever Kit-Vari-Mnt No Switch
      SKU-4911330023
      x
                  

      This interior battery disconnect allows you to turn the electrical power on/off from the drivers seat. It works in conjunction with a fire system kill switch.

      • Fits B&M Pro Ratchet, Thunder Stick, Outlaw, Lightning, ST Quarter Stick Shifters
      • Lokar vari-mount or can be mounted to the floor
      • No Switch Included
      • Red billet aluminum power lever
      • Made in the USA
      • Kit standard with 8' push pull cable
    • Lokar 1330013 Interior Battery Disconnect Lever-Direct Mnt No Switch
      New
      Lokar 1330013 Interior Battery Disconnect Lever-Direct Mnt No Switch
      SKU-4911330013
      x
                  

      This interior battery disconnect lever kit allows the driver to turn the electrical power on/off from the drivers seat. It works in conjunction with the fire system kill switch.

      • Fits B&M Pro Bandit, Quarter Pro, and Precision Performance Products Shifters
      • Lokar Direct Mount
      • Red billet aluminum power lever
      • No switch included
      • Made in the USA
      • Kit standard with 8' push pull cable
    • Brake Light Switch with 3/8 Inch IFM Adapter Fitting
      Brake Light Switch with 3/8 Inch IFM Adapter Fitting
      SKU-91031304
      x
                  

      This brake light switch has a 3/8"-24 IFM thread so you can screw it right into an inverted flare brake fitting.

      • Designed to be installed into a 3/8"-24 inverted flare female fitting
      • Switch has two 1/4" wide male spade terminals
      • 3/8"-24 IFM thread adapter included
      NOTE:   If using residual valves in conjunction with this switch, we recommend installing the switch in-line before the residual valves.
    • Perma-Cool 18899 Inline 185 Degree Thermoswitch, -6 AN
      Perma-Cool 18899 Inline 185 Degree Thermoswitch, -6 AN
      SKU-57318899
      x
                  These thermoswitches feature an easy 2 wire hook up which make for a simple way to trigger an electric fan.  They are designed for use with Perma-Cool Maxi-Cool Jr. coolers with -6 AN male fittings.
      • Activates electric fan on at 185°F off at 165°F.
      • 15 Amp Maximum
      • -6 AN male/female
      • No relay needed

      18899 Installation Instructions (PDF)

    • AFCO 85260 HD 25 Amp Ignition/Accessory Switch
      AFCO 85260 HD 25 Amp Ignition/Accessory Switch
      SKU-10685260
      x
                  

      AFCO heavy duty 25 Amp ignition or accessory switch.

      Wiring Instructions (PDF)

    • Viper Pipes DD-DASH003RC Starter 3 Switch Panel, Mini Sprint
      Viper Pipes DD-DASH003RC Starter 3 Switch Panel, Mini Sprint
      SKU-9606616
      x
                  

      This 3 Switch "Carbon Fiber" Starter Panel features a power switch, fuel pump switch, and a starter push button. Rubber boots are included for the switches and push button. Easy to install and perfect for micro sprint racing needs.

      • Heavy duty toggle and push button switches
      • Rubber covers
      • Power, fuel pump, and push button engine start
      • Carbon fiber panel
      • Easy to install 

       

    • Lokar 1330022 Interior Battery Disconnect Lever Kit- Vari-Mnt 300 Amp
      New
      Lokar 1330022 Interior Battery Disconnect Lever Kit- Vari-Mnt 300 Amp
      SKU-4911330022
      x
                  

      This interior battery cutoff switch allows you to turn the elctrical power on/off from the drivers seat. It works in conjunction with a fire system kill switch.

      • Fits B&M Pro Ratchet, TCI Thunder Stick, TCI Outlaw, TCI Lightning, Hurst Quarters Stick, or can be floor mounted
      • Lokar vari-mount
      • 300 Amp
      • Red billet aluminum power lever
      • Made in the USA
      • Kit standard with 8' push pull cable
    • Classic Instruments SN57F Ford Oil Pressure Sender Bushing Kit Adaptor
      Classic Instruments SN57F Ford Oil Pressure Sender Bushing Kit Adaptor
      SKU-2751026
      x
                  Classic Instruments' brass angled-bushing kits allow for easy installation on most Ford engines. 

      The Oil Pressure Sender will not clear either the back of the intake manifold or the distributor body on many installations unless the Bushing Kit is used.

      • Bushing kit to install oil pressure sender
      • Ford applications
    • Magneto Kill Switch with Rubber Boot
      Magneto Kill Switch with Rubber Boot
      SKU-50026074
      x
                  Specially designed for Vertex magneto systems. A must for total driver saftey.  Includes water resistant rubber boot. 
              
    • Longacre 44891 Carbon Fiber Starter Switch Panel w/ Acc Switches
      Longacre 44891 Carbon Fiber Starter Switch Panel w/ Acc Switches
      SKU-47544891
      x
                  
      This composite starter switch panel is made of lightweight molded ABS featuring a carbon fiber pattern that matches Longacre's new composite gauge panels. The starter panel features a high capacity ignition switch with a waterproof cover and pilot light. Panel also includes two accessory switches that also have rubber switch covers and pilot lights.
      • Great looking Composite Panel - Lightweight molded ABS with a carbon fiber pattern
      • Matches our new Composite Gauge Panels
      • High capacity ignition switch with weatherproof cover and pilot light
      • Starter button with rubber switch boot to seal out moisture
      • 2 accessory switches with rubber switch covers and pilot lights
      • Assembled and wired, 40 amp @ 12v DC
      • Plugs into Longacre wiring harness (not included)
      • Pre-wired with high insulation 'Fat' wires and soldered terminals with heat shrink seals
    • AFCO 85032B Starter Switch Panel, 4-1/8 x 5-7/8 Inch
      AFCO 85032B Starter Switch Panel, 4-1/8 x 5-7/8 Inch
      SKU-10685032B
      x
                  

      AFCO starter switch panels are for standard ignitions.

      Wiring Instructions (PDF)

    • AFCO 85193 Warning Light Kit, Oil Temp.
      AFCO 85193 Warning Light Kit, Oil Temp.
      SKU-10685193
      x
                  

      These units allow the driver to maintain focus on the race.

      Wiring Instructions (PDF)

    • Two Post Battery Disconnect Switch
      Two Post Battery Disconnect Switch
      SKU-91064500
      x
                  Remote battery disconnect switch for safety and theft protection. A battery kill switch is required for use with alternators by the NHRA. Battery shut off switch can be remote mounted or where specified for saftey and  convenience.
      • 180 amp continuous, 1000 amp instantaneous
      • Die cast lever
      • Fits panel through 3/16" thick

      910-64500 Instructions (PDF)

    • Longacre 44623 Composite Carbon Fiber Starter Switch Panel w/ Cover
      Longacre 44623 Composite Carbon Fiber Starter Switch Panel w/ Cover
      SKU-47544623
      x
                  
      This composite starter switch panel is made of lightweight molded ABS featuring a carbon fiber pattern that matches Longacre's new composite gauge panels. The starter panel features a high capacity ignition switch with a aircraft style cover. The ignition switch is easy to turn off in an emergency but will not turn off from vibrations. Starter button has a rubber switch boot to seal out moisture.
      • Great looking Composite Panel - Lightweight molded ABS with a carbon fiber pattern
      • Matches our new Composite Gauge Panels
      • High capacity ignition switch with aircraft style cover - Easy to turn off in an emergency from any angle, even with gloves. Will not turn off from vibration.
      • Starter button with rubber switch boot to seal out moisture
      • Assembled and wired, 40 amp @ 12v DC
      • Plugs into Longacre wiring harness (not included)
      • Pre-wired with high insulation 'Fat' wires and soldered terminals with heat shrink seals
    • AFCO 85011B Starter Switch Panel with Light, 3 x 4 Inch
      AFCO 85011B Starter Switch Panel with Light, 3 x 4 Inch
      SKU-10685011B
      x
                  

      AFCO switch panels are for standard ignitions.

      Wiring Instructions (PDF)

    • Longacre 44621 Composite Starter Switch Panel
      Longacre 44621 Composite Starter Switch Panel
      SKU-47544621
      x
                  
      This composite starter switch panel is made of lightweight molded ABS featuring a carbon fiber pattern that matches Longacre's new composite gauge panels. The starter panel features a high capacity ignition switch with a waterproof cover and pilot light. The starter button also includes a rubber switch boot to seal out moisture.
      • Great looking Composite Panel - Lightweight molded ABS with a carbon fiber pattern
      • Matches Longacre's new Composite Gauge Panels
      • High capacity ignition switch with weatherproof cover and pilot light
      • Starter button with rubber switch boot to seal out moisture
      • Assembled and wired, 40 amp @ 12v DC
      • Plugs into Longacre wiring harness (not included)
      • Pre-wired with high insulation 'Fat' wires and soldered terminals with heat shrink seals
    Goto Previous PagePrevious Page
    1 2