Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Speedway Motors is the winner's choice for racing suspension and steering components! Speedway stocks the absolute best in racing shocks, coil-overs, and racing coil springs. Check out our assortment of IMCA-approved tubular control arms and spindles. For the rear suspension, combine our racing leaf springs with an adjustable pull bar and panhard bar for improved traction. Mount your Grand National 9'' Ford or quickchange rearend with quality Speedway birdcages, swedged rods and heims. With so many choices of power steering pumps, boxes and U-joints, you won't need to shop anywhere else!

"Oval Track, Suspension Arms, Bushings and Accessories" Page 1 of 25

  • Low Profile Grease Zerks
    $7.99
    Product Rating: 5.00 Stars
    Low Profile Grease Zerks
    SKU-91010595
    x
                

    Great for spindles and other areas needing added clearance. It has a zinc coated steel body with a stainless steel ball in center. Constructed with 5/16" hex head with 1/4 - 28 UNF thread.

    Includes 5 zerks per bag. MUST be used with grease needle # 910-1187.

  • Steel Lower Ball Joint Sleeve, K727 Style 1960-66 Chrysler
    Steel Lower Ball Joint Sleeve, K727 Style 1960-66 Chrysler
    SKU-91034816
    x
                

    This plain finish, mild steel ball joint sleeve is used to build or repair control arms. Screw in style.

  • AFCO Swaged Steel Tube 7/8 Inch O.D. (5/8) Inch, 12 Inch Long
    AFCO Swaged Steel Tube 7/8 Inch O.D. (5/8) Inch, 12 Inch Long
    SKU-10636182
    x
                AFCO swaged steel tubes are formed using .065" wall DOM material.  This tubing is placed in a swaging machine that forms the reduced end size using a series of hammer to die blows.  The finished product has reduced ends and the wall thickness stays within +/- .001".  No stretching or crimping is used to produce an AFCO swaged tube.  You can't buy a better-built tube for strength and weight savings.
    • Consistent wall thickness allows better thread engagement
    • Yellow zinc-plated for increased part life
    • Deep knurl for easy length adjustments
  • BSB Manufacturing 4047S Pinion Mount Replacement Adjustable Bolt
    BSB Manufacturing 4047S Pinion Mount Replacement Adjustable Bolt
    SKU-9164047S
    x
                Replacement adjustable bolt for BSB Mfg. quick change and 9" Ford steel pinion plate panhard bar mounts.
            
  • Wehrs 5 Inch Dual Bearing Spring Slider, 26 Inch Extended Length
    Wehrs 5 Inch Dual Bearing Spring Slider, 26 Inch Extended Length
    SKU-91045252
    x
                
    Lots of new trickery on these new dual bearing spring sliders. Wehrs uses a linear ball shaft bearing instead of bronze bushing along with a shaft stabilizing internal piston for the smoothest and most stable slider on the market. The spring cup opposite the adjusting nut is quickly removed with a clip, so you don’t have to unscrew the nut to remove the spring. Also a four position locking mechanism for fine tuning. Wehrs put a Torrington bearing on the adjuster nut so you can adjust it easily and so the spring works freely throughout its travel. The length is on this slider is 26” extended.
    • Linear ball shaft bearing
    • Shaft stabilizing internal piston
    • Innovative quick clip release and Torrington bearing adjusting nut for  
    • Effortless chassis adjustments
    • Extended 26” length

     

  • Speedway Steel 5/8 Inch LH Male Heim Joint Rod Ends with Stud
    Speedway Steel 5/8 Inch LH Male Heim Joint Rod Ends with Stud
    SKU-1750329
    x
                These rod ends make it easy to build carb or shift linkage, tie rod assemblies or anything else you can think of.  They are teflon lined.
            
  • AFCO 20132-2P Replacement Coil Spring Slider Shaft, 9 Inch
    AFCO 20132-2P Replacement Coil Spring Slider Shaft, 9 Inch
    SKU-106201322P
    x
                

    Assorted AFCO Spring Slider Components

    Replacement Slider Shaft

    • 9 Inch
  • Seals-It WS7500 Heim Joint Rod End Seals, 3/4 Inch Hole, Set/6
    Seals-It WS7500 Heim Joint Rod End Seals, 3/4 Inch Hole, Set/6
    SKU-91001505
    x
                

    These rod end seals are a neoprene rubber seal bonded to an aircraft quality washer. Extends the life of your rod ends by keeping the dirt, debris and moisture out of the spherical ball. They fit on both sides of the ball end of the heim joint and are sized to match the hole in the spherical ball.  

    For use with standard and Pro 1 Series rod end only. Sold in sets of six, which will cover both sides of three rod ends.

  • AFCO 20043 Ball Joint Sleeve, 1960-66 Chrysler Upper, Small Thread
    AFCO 20043 Ball Joint Sleeve, 1960-66 Chrysler Upper, Small Thread
    SKU-10620043
    x
                

    Small threaded sleeve for AFCO screw-in ball joints 20034 and 20035.

    • 1.830" I.D.
    • 2.250" O.D.
    • 1.00" tall
    • .35 lbs.
  • AFCO 36221-1 Swedged Aluminum Tube, 1 Inch O.D.(5/8) Inch, 21-1/2 Inch
    AFCO 36221-1 Swedged Aluminum Tube, 1 Inch O.D.(5/8) Inch, 21-1/2 Inch
    SKU-106362211
    x
                

    Insist on 6061-T6 drawn tubing for strength, durability, and precise fit.  Extruded tubing looks similar, but it is not as strong or durable.  Extruded parts are prone to failure, while drawn parts keep performing.  Drawn material offers the same strength as hex without the additional weight.

    These tubes are threaded LH on one side and RH on the other.

  • AFCO 20028R-2 Round Tube Lower Arm, Rubber Bushing, Press-In, 18 Inch
    AFCO 20028R-2 Round Tube Lower Arm, Rubber Bushing, Press-In, 18 Inch
    SKU-10620028R2
    x
                
    • Made from .095" wall DOM tubing
    • Rubber bushing included
    • Uses standard 20051 strut bars 
    • Use Moog K727 style ball joints for screw-in and K6141 style of press-in
  • AFCO 5-Hole Steel Mounting Bracket, 1/2 Inch Holes
    AFCO 5-Hole Steel Mounting Bracket, 1/2 Inch Holes
    SKU-10620381
    x
                Use these AFCO 1/8" thick steel plates to mount radius rods, brake rods, third link, Panhard bars, etc.
            
  • QA1 1210-505 Repl Housing for K772 Style 721-10105 Upper Ball Joint
    QA1 1210-505 Repl Housing for K772 Style 721-10105 Upper Ball Joint
    SKU-72110505
    x
                

    For a variety of racing applications, QA1's Screw-In Style Ultimate Ball Joint is a great choice. This patented, self-lubricating design is 100% owner rebuildable and is exclusive to QA1.

    • 1968-1989 Chrysler
  • Front Hairpin Radius Rods, 27 Inch, Unpolished Stainless
    Front Hairpin Radius Rods, 27 Inch, Unpolished Stainless
    SKU-91635021
    x
                

    These front radius rods are ideal for smaller or full-fendered cars. Rugged, 7/8" O.D. brushed stainless steel tubing is threaded 5/8"-18 NF right hand at each end.

    Designed to be used with batwings or axle brackets with a 5" center to center bolt hole spacing on front tube or I-beam axles only. Not to be used for rear suspensions. Before installing the heim joints or clevis ends, the actual measurement will be center to center 4-1/2". The angle of the tube will increase the measurement to 5" after installing the end hardware.

  • Wehrs Machine WM200LRB Lightweight Left Rear Steel Bearing Birdcage
    Wehrs Machine WM200LRB Lightweight Left Rear Steel Bearing Birdcage
    SKU-91082201
    x
                

    Steel roller bearing birdcages have a split plate design to allow for repairs without removing the entire hub. Standard model comes with angled shock drop with a no bind swivel. Bottom hole is 4-1/2” down from centerline of housing and top is 4-1/2” up but features multiple holes to change the rate at which the birdcage indexes. Also allows for various shock and spring mounting locations for ultimate turn ability.

  • Speedway Steel 5/16 Inch LH Male Heim Joint Rod Ends with Stud
    Speedway Steel 5/16 Inch LH Male Heim Joint Rod Ends with Stud
    SKU-1750322
    x
                These rod ends make it easy to build carb or shift linkage, tie rod assemblies or anything else you can think of.  They are teflon lined.
            
  • 3/8 X 3/8 Clevis
    $7.99
    3/8 X 3/8 Clevis
    SKU-6680116
    x
                The correct clevis for mounting our rack and pinion units (668-0105 & 668-0115). 
            
  • Jet Mod Panhard Bar Bracket
    $29.99
    Jet Mod Panhard Bar Bracket
    SKU-91673065
    x
                

    Jet Mod and Viper car components.

  • Speedway Offset Upper Control Arm, Aluminum Cross Shaft, RH, 8-3/4 In
    Speedway Offset Upper Control Arm, Aluminum Cross Shaft, RH, 8-3/4 In
    SKU-91720003
    x
                

    Offset type tubular steel upper control arm with a lightweight aluminum cross shaft. Accepts Moog style K6024 or K6136 ball joints.

    Offset Upper Control Arm Chart (GIF)

  • QA1 1210-110 K5103 Style Lower Ball Joint
    QA1 1210-110 K5103 Style Lower Ball Joint
    SKU-72110110
    x
                

    QA1 also offers its Ultimate Ball Joint in a Press-In Style for a variety of racing applications. A 100% owner rebuildable design, the Ultimate Ball Joint is a QA1 exclusive. This ball joint is self-lubricating.  See the application tab to see if these will fit your ride.

  • Speedway Puck Pull Bar Travel Stop - Short
    Speedway Puck Pull Bar Travel Stop - Short
    SKU-91045627
    x
                Use these travel stops on your Speedway pull bars. They are constructed of thick steel for strength with  a painted black finish. 
    • Short travel stop
    • Replacement for Speedway Puck Pull Bar 91045621
  • AFCO 19065 Modular Upper Ball Joint Collar Ring, 10 Degree, LH
    AFCO 19065 Modular Upper Ball Joint Collar Ring, 10 Degree, LH
    SKU-10619065
    x
                

    AFCO Modular Ball Joint Holders allow racers to assemble the perfect modified upper control arm. When combined with AFCO swaged steel tubes, you can have the front end steeing adjustments your modified needs.

    • Accepts Moog K772 style ball joints
    • Plated for long life
    • Stud has 5/8"-18 threads
    • Tab is 3/8" thick
  • QA1 Repl Ball Joint Stud for 1210-506 Housing K727 Style Ball Joint
    QA1 Repl Ball Joint Stud for 1210-506 Housing K727 Style Ball Joint
    SKU-7219034
    x
                

    QA1’s patented Ultimate Ball Joints are 100% owner rebuildable. Multiple stud lengths are available.

    • '60-'66 Chrysler
  • AFCO 36213-1 Swedged Aluminum Tube, 1 Inch O.D.(5/8) Inch, 13-1/2 Inch
    AFCO 36213-1 Swedged Aluminum Tube, 1 Inch O.D.(5/8) Inch, 13-1/2 Inch
    SKU-106362131
    x
                

    Insist on 6061-T6 drawn tubing for strength, durability, and precise fit.  Extruded tubing looks similar, but it is not as strong or durable.  Extruded parts are prone to failure, while drawn parts keep performing.  Drawn material offers the same strength as hex without the additional weight.

    These tubes are threaded LH on one side and RH on the other.

  • AFCO 20078 Steel Upper Control Arm Bushing, 1.275 O.D. x .670 I.D.
    AFCO 20078 Steel Upper Control Arm Bushing, 1.275 O.D. x .670 I.D.
    SKU-10620078
    x
                
    • Minimizes alignment change during cornering since they do not deflect 
    • Dramatically frees up front suspension
    • Dimensions allow direct replacment of the standard bushing
    • Inner sleeve allows bolt to be tightened without crushing or binding
    • Includes a grease zerk fitting for lubrication

    Upper A-Arm Bushing Application Chart (GIF)

    Note: Due to production tolerance variance in original equipment parts, steel bushings need to be tack welded into the control arm.

  • Aluminum LH Female Heim Joint Rod Ends, 1/4 Inch
    Aluminum LH Female Heim Joint Rod Ends, 1/4 Inch
    SKU-1170712
    x
                

    Aluminum rod ends have close tolerance, 3 piece, medium duty rod end.  Hard anodized 7075-T6 aerospace quality aluminum body.  Heat treated, 5210 precision ground ball, Kevlar race.  Self lubricating Teflon liner to seal out dirt an debris.

    Applications: Designed for motorsports application where weight is critical.  All of the strength & features of the precision rod ends at half of the weight.

    ASSEMBLY TIP:
      To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • FK Rod Ends SJM10T Stainless Steel 5/8 Inch RH Male Heim Joint
    FK Rod Ends SJM10T Stainless Steel 5/8 Inch RH Male Heim Joint
    SKU-1750716
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 5/8" RH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • AFCO Swaged Steel Tube, 10 Inch Long, 1 Inch O.D. (3/4) Inch
    AFCO Swaged Steel Tube, 10 Inch Long, 1 Inch O.D. (3/4) Inch
    SKU-10619510
    x
                AFCO swaged steel tubes are formed using .095" wall DOM material.  This tubing is placed in a swaging machine that forms the reduced end size using a series of hammer to die blows.  The finished product has reduced ends and the wall thickness stays within +/- .001".  No stretching or crimping is used to produce an AFCO swaged tube.  You can't buy a better-built tube for strength and weight savings.
    • Consistent wall thickness allows better thread engagement
    • Yellow zinc-plated for increased part life
    • Deep knurl for easy length adjustments
  • Weld-On Chassis Tabs, 2-1/2 Inch with 3/8 Hole
    Weld-On Chassis Tabs, 2-1/2 Inch with 3/8 Hole
    SKU-91007215
    x
                

    Weld-on tabs for miscellaneous mounting jobs. You can't make them this good for this price! 

    Sold in packs of 5.

  • Steel Lower Ball Joint Sleeve, K6145 Style
    Steel Lower Ball Joint Sleeve, K6145 Style
    SKU-91034820
    x
                Used to build or repair control arms. Fits 917-20039 lower. 
            
  • 1964-1972 GM A-Body Rear Sway Bar Kit, 7/8 Inch
    New
    1964-1972 GM A-Body Rear Sway Bar Kit, 7/8 Inch
    SKU-113692
    x
                

    These rear sway bars are designed as a performance replacement upgrade for your classic GM muscle car.  They feature a 7/8" diameter solid steel bar and come with all hardware needed for a successful installation. If your A-Body came with an anti-sway bar from the factory, chances are this kit will be a direct replacement. If it did not, a small amount of drilling will be required for installation of the sway bar kit.

    • Achieve flatter cornering
    • Complements front sway bar to reduce understeer and gain more neutral handing
    • Adds to cornering stability at speed
    • Solid steel 7/8" diameter bar
    • Includes polyurethane bushings for increased responsiveness
    • Black powder coated finish
    • Corrosion resistant zinc plated hardware included

    Fits:

    • 1964-1972 Buick Skylark (with O.E. replacement , rear only)
    • 1964-1977 Chevrolet Chevelle, Malibu and El Camino
    • 1964-1977 Oldsmobile Cutlass Supreme, F-85, 442 (with 883 or 709 front with O.E. replacement, rear only)

     

  • Precision Carbon Steel LH Female Heim Joint Rod Ends, 3/8 Inch
    Precision Carbon Steel LH Female Heim Joint Rod Ends, 3/8 Inch
    SKU-1750413
    x
                Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size. 

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • Speedway Steel 1/2 Inch LH Female Heim Joint Rod Ends with Stud
    Speedway Steel 1/2 Inch LH Female Heim Joint Rod Ends with Stud
    SKU-1750425
    x
                These rod ends make it easy to build carb or shift linkage, tie rod assemblies or anything else you can think of. They are Teflon lined.
            
  • AFCO Progressive 5th Coil Spring
    AFCO Progressive 5th Coil Spring
    SKU-10620087PR
    x
                
    • Wide range of pre-load adjustment
    • Soft initial rate improves forward bite
    • Stiff secondary provides quick application of torque to rear tires

    This part is a direct replacement for 106-20087

    Information Sheet (PDF)

  • Speedway Steel 3/16 Inch LH Male Throttle Linkage Rod Ends with Stud
    Speedway Steel 3/16 Inch LH Male Throttle Linkage Rod Ends with Stud
    SKU-1750320
    x
                

    These 3/16" rod ends can be used to create a trick throttle linkage system when combined with our swedged aluminum tubing.

    Use with swedged aluminum throttle tube.

  • AFCO 20038 Standard 1971-76 GM B-Body Lower Ball Joint
    AFCO 20038 Standard 1971-76 GM B-Body Lower Ball Joint
    SKU-10620038
    x
                

    Not all ball joint are created equal.  That's why AFCO uses the best components from the top manufacturers.  There are many different design characteristics and manufacturing processes that account for the quality and performance of ball joints.  These joints will give you the AFCO advantage!

    See Application tab for corresponding vehicle models. 

  • AFCO 20007-1 Strut Type Upper Control Arm, Alum Cross Shaft 9-3/4 Inch
    AFCO 20007-1 Strut Type Upper Control Arm, Alum Cross Shaft 9-3/4 Inch
    SKU-106200071
    x
                
    • Strut type tubular upper control arm
    • Made from .083" wall tubing (under 10") and .120" wall tubing (over 10")
    • Cross shaft bushings clearanced to allow shrinkage during the welding process
    • Cross shaft uses 9/16" holes on 6" center
    • 3/16" thick ball joint plate provides maximum strength
    • Accepts Moog K6024 or K6136 style bolt-in ball joints
    • Length measured from cross shaft centerline to ball joint center

    Adjusting Camber (GIF)

  • Standard Steel Heim Joint Rod Ends, 1/4 Inch LH Male
    Standard Steel Heim Joint Rod Ends, 1/4 Inch LH Male
    SKU-1750301
    x
                

    These standard rod ends are a general purpose, two piece design. They have a carbon steel body and a hardened ball with metal to metal contact.

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Standard Rod End Chart (GIF)

  • Sway Bar End Link Kit, 5 Inch
    $11.99
    $18.99
    New
    Sway Bar End Link Kit, 5 Inch
    SKU-113016
    x
                

    These sway bar end link kits come with all necessary hardware for a successful installation. They are designed with durable polyurethane bushings and steel material so you know that you are getting a quality kit.

    • Sold as Kit
    • 5" bushing to bushing working length, 8" overall length
    • Polyurethane Bushings
    • Hardware Included

     


  • BSB Manufacturing 4062 Alum 5th & 6th Coil Mount, 1.5 Inch Round Tube
    BSB Manufacturing 4062 Alum 5th & 6th Coil Mount, 1.5 Inch Round Tube
    SKU-91721015
    x
                This coil mount holds 5th and 6th coil assemblies. Mounts on 1-1/2" round tubing. Complete with quick pin for shock. Made from aluminum.
            
Goto Previous PagePrevious Page
1 2 3 4 5 ... 25