Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Oval Track Steering At Speedway Motors

Let Speedway Motors "Steer" you in the right direction with the right steering components for your race car! From U-joints from Sweet Mfg. to the top power steering pumps from KRC, we've got the best parts at the best prices around. Don't forget to add a Speedway Motors aluminum steering wheel for the feel behind the wheel that can't be duplicated.

"Oval Track, Steering Shaft Universal Joints" Page 1 of 2

  • Sweet Mfg Steering U-Joint, 5/8-36 Spline 3/4 DD, Vega/Corvair/GM Rack
    Sweet Mfg Steering U-Joint, 5/8-36 Spline 3/4 DD, Vega/Corvair/GM Rack
    SKU-91032291
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints feature full compliment bearings and a 5/8"-36 spline.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 5/8"-36 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • AFCO 30307 U-Joint, 9/16 Inch-26 Spline
    AFCO 30307 U-Joint, 9/16 Inch-26 Spline
    SKU-10630307
    x
                

    These splined U-joints feature a set screw & lock-nut.  Maximum operation angle of this steering universal joint is 32°.

    • 9/16"-26 spline x 3/4" round weld-on
    • Greased needle bearing with Teflon seal
    • Forged 1045 steel
    • Broached spline for better fit
    • Heat-treated forgings
    • 1-1/8" O.D. x 3-3/4" length

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

     

  • Sweet Mfg U-Joint, 3/4 48-Spline to 3/4 In Round, Wilwood/SJ/MGB
    Sweet Mfg U-Joint, 3/4 48-Spline to 3/4 In Round, Wilwood/SJ/MGB
    SKU-91032241
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints have a 3/4" round weld-on end.

    • Works with: Wilwood, Sweet Jaguar, MGB
    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 3/4"-48 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg. Double U-Joint, 5/8 36-Spline to 3/4 DD, Vega/Corvair/GM
    Sweet Mfg. Double U-Joint, 5/8 36-Spline to 3/4 DD, Vega/Corvair/GM
    SKU-9103245
    x
                

    Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. These steering universal joints are made of forged vanadium steel and real needle bearing joints.

    • Overall length is 5-1/2”
    • O.D. at ends is 1.12”
    • O.D. in the middle is 1.476”
    • O.D. at caps is 1.350”
    • O.D. at cap retainer screws is 1.545”
    • Length of center section is 2-3/4”
    Learn more about u-joints and steering systems by reading our tech article, U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg Steering U-Joint, 3/4-48 Spline to 1 Inch DD, Wilwood/SJ/MGB
    Sweet Mfg Steering U-Joint, 3/4-48 Spline to 1 Inch DD, Wilwood/SJ/MGB
    SKU-91032395
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These 3/4"-48 spline steering universal joints work with Wilwood, Sweet Jaguar, and MGB.

    • Works with: Wilwood, Sweet Jaguar, MGB
    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 3/4"-48 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg U-Joint, 3/4 In Round to 1 In DD, GM Column/Universal
    Sweet Mfg U-Joint, 3/4 In Round to 1 In DD, GM Column/Universal
    SKU-91032390
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints have a 3/4 round weld-on end.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing
    • Features needle bearing u-joints
    • U-Joint=3.875" L x 1.375" D
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Garage Sale - AFCO U-Joint, 1 Inch DD X 3/4 Inch 36 Spline
    Garage Sale
    Garage Sale - AFCO U-Joint, 1 Inch DD X 3/4 Inch 36 Spline
    SKU-AUP1114
    x
                Please view the product's page for more information
            
  • Sweet Mfg U-Joint, 3/4-30 Spline to 3/4 In DD, Small GM P/S 1978-Up
    Sweet Mfg U-Joint, 3/4-30 Spline to 3/4 In DD, Small GM P/S 1978-Up
    SKU-91032293
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints are needle bearing and have 3/4"-30 spline. 

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 3/4"-30 Spline

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg U-Joint, 1 In DD to 3/4 DD, IDIDIT/Flaming River Column
    Sweet Mfg U-Joint, 1 In DD to 3/4 DD, IDIDIT/Flaming River Column
    SKU-91032401
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing.

    These steering universal joints are CNC machined from aircraft steel to precision tolerances. The sealed needle bearing design will last ten times longer than a standard pin and block universal joint. The unique nickel plating prevents rust without the hassle of painting.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg Steering U-Joint 9/16 26 Spline to 3/4 DD, Mustang II Manual
    Sweet Mfg Steering U-Joint 9/16 26 Spline to 3/4 DD, Mustang II Manual
    SKU-91032290
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints feature forged Vanadium steel yokes and full compliment bearings.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Garage Sale - Sweet Mfg Steering U-Joint, 3/4-48 Spline to 1 Inch DD, Wilwood/SJ/MGB
    Garage Sale
    Garage Sale - Sweet Mfg Steering U-Joint, 3/4-48 Spline to 1 Inch DD, Wilwood/SJ/MGB
    SKU-UP36399
    x
                Please view the product's page for more information
            
  • Sweet Mfg. Steering U-Joint, 1 In 48-Spline to 3/4 In Round, GM Column
    Sweet Mfg. Steering U-Joint, 1 In 48-Spline to 3/4 In Round, GM Column
    SKU-91032240
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints have a 3/4" round weld-on end.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 1"-48 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg U-Joint 3/4 - 30 Spline to 3/4 Round, Small GM P/S 78-Up
    Sweet Mfg U-Joint 3/4 - 30 Spline to 3/4 Round, Small GM P/S 78-Up
    SKU-91032238
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints have a 3/4" round weld-on end.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 3/4"-30 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg. Double U-Joint, 3/4 In 36-Spline to 3/4 In DD, GM, MII
    Sweet Mfg. Double U-Joint, 3/4 In 36-Spline to 3/4 In DD, GM, MII
    SKU-9103246
    x
                

    Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. This Mustang II power rack U joint is made of forged vanadium steel and real needle bearing joints.  5-5/8" overall length.

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Unisteer 8050300 Steering U-Joint, 3/4 Inch Double D to 3/4 Inch DD
    Unisteer 8050300 Steering U-Joint, 3/4 Inch Double D to 3/4 Inch DD
    SKU-910300
    x
                

    These polished stainless steel steering U-joints look great and use a pinch bolt on each end for easy installation.

    This particular steering universal joint is made to fit 3/4"DD shafting on both sides. Both sides incorporate the pinch bolt design.

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    NOTE:  These u-joints contain a safety feature that requires the DD steering shaft to be notched for pinch bolt clearance. Once notched, the pinch bolt MUST be torqued to 45 ft/lbs to ensure a tight fit.

  • Garage Sale - Sweet Chrome 13/16-36 Spline x 1" DD U-Joint
    Garage Sale
    Garage Sale - Sweet Chrome 13/16-36 Spline x 1" DD U-Joint
    SKU-9106112
    x
                Please view the product's page for more information
            
  • Double Steering U-Joint, .620 In-36 Spline to 3/4 In Round, Chrysler
    Double Steering U-Joint, .620 In-36 Spline to 3/4 In Round, Chrysler
    SKU-91032274
    x
                

    Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. These steering universal joints are made of forged vanadium steel and real needle bearing joints.  5-5/8" overall length.

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

     

  • AFCO 30309 U-Joint, 5/8 Inch-36 Spline
    $64.99
    $69.99
    AFCO 30309 U-Joint, 5/8 Inch-36 Spline
    SKU-10630309
    x
                

    These splined U-joints feature a set screw & lock-nut.  Maximum operation angle of this steering universal joint is 32°.

    • 5/8"-36 spline x 3/4" round weld-on
    • Greased needle bearing with Teflon seal
    • Forged 1045 steel
    • Broached spline for better fit
    • Heat-treated forgings
    • 1-1/8" O.D. x 3-3/4" length

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

     

  • Sweet Mfg. Double U-Joint, 3/4 In Round to 3/4 In DD, Universal
    Sweet Mfg. Double U-Joint, 3/4 In Round to 3/4 In DD, Universal
    SKU-9103244
    x
                

    Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. Made of forged vanadium steel and real needle bearing joints.  5-5/8" overall length.

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg. Double U-Joint, 5/8-36 Spline 3/4 Round, Vega/Corvair/GM
    Sweet Mfg. Double U-Joint, 5/8-36 Spline 3/4 Round, Vega/Corvair/GM
    SKU-9103225
    x
                

    Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. These steering universal joints are made of forged vanadium steel and real needle bearing joints.  5-5/8" overall length.

    • Overall length is 5-1/2”
    • O.D. at ends is 1.12”
    • O.D. in the middle is 1.476”
    • O.D. at caps is 1.350”
    • O.D. at cap retainer screws is 1.545”
    • Length of center section is 2-3/4”
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

     

  • Sweet Mfg. 401-51221 U-Joint, 3/4 Inch-36 Spline to 3/4 Inch-20 Spline
    Sweet Mfg. 401-51221 U-Joint, 3/4 Inch-36 Spline to 3/4 Inch-20 Spline
    SKU-91032287
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. All of these steering universal joints have 3/4 weld-on ends.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing
    • Features needle bearing u-joints
    • U-Joint=3.875" L x 1.375" D
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

     

  • Sweet Mfg Steering U-Joint, 13/16-36 Spline to 1In DD, Big GM Pre 1978
    Sweet Mfg Steering U-Joint, 13/16-36 Spline to 1In DD, Big GM Pre 1978
    SKU-91032396
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints are 13-16"-36 spline and feature forged Vanadium steel yokes.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 13/16"-36 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • U-Joint, 1"-48 Spline To 3/4" DD
    U-Joint, 1"-48 Spline To 3/4" DD
    SKU-91032297
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints are 1"-48 spline.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 1"-48 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg U-Joint, 9/16 In 26-Spline to 3/4 Round, Mustang II Manual
    Sweet Mfg U-Joint, 9/16 In 26-Spline to 3/4 Round, Mustang II Manual
    SKU-91032237
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints have 3/4 weld-on ends.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Unisteer 8050850 Steering U-Joint, 3/4 Inch 36-Spline to 3/4 In Smooth
    Unisteer 8050850 Steering U-Joint, 3/4 Inch 36-Spline to 3/4 In Smooth
    SKU-910850
    x
                

    These polished stainless steel steering U-joints look & function beautifully and use non-pinch bolts which will need to be either welded, cross-drilled and pinned or bolted These steering universal joints are 3-3/4 inch in length and are 1.650 inch in outside diameter. 

    • The OD is 1.650" (41.90mm) 
    • 3-3/4" in total length
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.
  • AFCO 30306 U-Joint, 13/16 Inch-36 Spline
    AFCO 30306 U-Joint, 13/16 Inch-36 Spline
    SKU-10630306
    x
                

    These splined U-joints feature a set screw & lock-nut.  Maximum operation angle of this steering universal joint is 32°.

    • 13/16"-36 spline X 3/4" round weld-on
    • Greased needle bearing with Teflon seal
    • Forged 1045 steel
    • Broached spline for better fit
    • Heat-treated forgings
    • 1-1/8" O.D. x 3-3/4" length

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

     

  • AFCO 30303 U-Joint, 3/4 Inch, Smooth Ends
    AFCO 30303 U-Joint, 3/4 Inch, Smooth Ends
    SKU-10630303
    x
                

    These splined U-joints feature a set screw & lock-nut.  Maximum operation angle of this steering universal joint is 32°.

    • 3/4" Round weld-on X 3/4" Round weld-on
    • Greased needle bearing with Teflon seal
    • Forged 1045 steel
    • Heat-treated forgings
    • 1-1/8" O.D. x 3-3/4" length

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

     

  • Sweet Mfg Steering U-Joint, 3/4 In Round to 3/4 In Round, Universal
    Sweet Mfg Steering U-Joint, 3/4 In Round to 3/4 In Round, Universal
    SKU-91032234
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering u-joints available. Made by Sweet Manufacturing. These steering universal joints have 3/4 weld-on ends.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing
    • Features needle bearing u-joints
    • U-Joint=3.875" L x 1.375" D

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

     

  • Sweet Mfg U-Joint, 3/4-30 Spline to 1 In DD, Small GM P/S 1978-Up
    Sweet Mfg U-Joint, 3/4-30 Spline to 1 In DD, Small GM P/S 1978-Up
    SKU-91032393
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints are 3/4"-30 spline and of the highest quality for racing and street use. 

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 3/4"-30 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • U-Joint, 3/4"-36 Spline To 3/4" Round Weld-on
    U-Joint, 3/4"-36 Spline To 3/4" Round Weld-on
    SKU-91032236
    x
                

    Don't jeopardize your safety with inferior quality Mustang II power rack universal joints. Speedway offers only the finest steering U-joints made by Sweet Manufacturing.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    •  3/4"-36 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg U-Joint, 1 In DD, 3/4 Round, IDIDIT/Flaming River Column
    Sweet Mfg U-Joint, 1 In DD, 3/4 Round, IDIDIT/Flaming River Column
    SKU-91032400
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints have a 3/4" round weld-on end.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg. Steering U-Joint, 1 Inch 48-Spline to 1 Inch DD, GM Column
    Sweet Mfg. Steering U-Joint, 1 Inch 48-Spline to 1 Inch DD, GM Column
    SKU-91032397
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints are 1"-48 spline.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 1"-48 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Unisteer 8050880 Steering U-Joint, 3/4 Inch-36 Spline to 3/4 Inch DD
    Unisteer 8050880 Steering U-Joint, 3/4 Inch-36 Spline to 3/4 Inch DD
    SKU-910240
    x
                

    These polished stainless steel steering U-joints look great and use a pinch bolt on each end for easy installation.

    This particular steering universal joints Size is 3/4"-36 count spline by 3/4"DD. This is the size that is used on Ford Power rack & pinions such as the Mustangs. This U-joint uses pinch bolt fasteners on either side.

    • The OD is 1.650" (41.90mm) 
    • 3-3/4" in total length
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    NOTE:  These u-joints contain a safety feature that requires the DD steering shaft to be notched for pinch bolt clearance. Once notched, the pinch bolt MUST be torqued to 45 ft/lbs to ensure a tight fit.

  • U-Joint, 5/8"-36 Spline to 3/4" Round Weld-On
    U-Joint, 5/8"-36 Spline to 3/4" Round Weld-On
    SKU-91032235
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. This steering universal joint is the highest quality for racing or street use.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 5/8"-36 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • AFCO 30305 U-Joint, 3/4 Inch-36 Spline
    AFCO 30305 U-Joint, 3/4 Inch-36 Spline
    SKU-10630305
    x
                

    These splined U-joints feature a set screw & lock-nut.  Maximum operation angle of this steering universal joint is 32°.

    • 3/4"-36 spline x 3/4" round weld-on
    • Greased needle bearing with Teflon seal
    • Forged 1045 steel
    • Broached spline for better fit
    • Heat-treated forgings
    • 1-1/8" O.D. x 3-3/4" length

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

     

  • Sweet Mfg U-Joint, 3/4 In 36-Spline to 3/4 DD, GM Manual/Mustang II
    Sweet Mfg U-Joint, 3/4 In 36-Spline to 3/4 DD, GM Manual/Mustang II
    SKU-91032294
    x
                

    Don't jeopardize your safety with inferior quality Mustang II power rack universal joints. Speedway offers only the finest steering U-joints made by Sweet Manufacturing.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    •  3/4"-36 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg. Double U-Joint, 9/16 In-26 Spline to 3/4 In Round, MII
    Sweet Mfg. Double U-Joint, 9/16 In-26 Spline to 3/4 In Round, MII
    SKU-9103227
    x
                

    Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. These steering universal joints are made of forged vanadium steel and real needle bearing joints.  5-5/8" overall length.

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

     

  • Sweet Mfg U-Joint, 13/16 36-Spline to 3/4 Round, Big GM Pre 1978
    Sweet Mfg U-Joint, 13/16 36-Spline to 3/4 Round, Big GM Pre 1978
    SKU-91032239
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints have a 3/4" round weld-on end.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 13/16"-36 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • U-Joint, 3/4" Round Weld-on To 3/4 DD
    U-Joint, 3/4" Round Weld-on To 3/4 DD
    SKU-91032292
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints have a 3/4 round weld-on end.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing
    • Features needle bearing u-joints
    • U-Joint=3.875" L x 1.375" D
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

     

  • Sweet Mfg. 401-51121 13/16-36 Spline x 3/4-20 Spline U-Joint
    Sweet Mfg. 401-51121 13/16-36 Spline x 3/4-20 Spline U-Joint
    SKU-91032409
    x
                Don't jeopardize your safety with inferior quality  steering components. Speedway offers only the finest steering U-joints  available. Made by Sweet Manufacturing. These steering universal joints are made of forged Vanadium steel. 
    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.


Goto Previous PagePrevious Page
1 2