Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Speedway Motors is the winner's choice for racing suspension and steering components! Speedway stocks the absolute best in racing shocks, coil-overs, and racing coil springs. Check out our assortment of IMCA-approved tubular control arms and spindles. For the rear suspension, combine our racing leaf springs with an adjustable pull bar and panhard bar for improved traction. Mount your Grand National 9'' Ford or quickchange rearend with quality Speedway birdcages, swedged rods and heims. With so many choices of power steering pumps, boxes and U-joints, you won't need to shop anywhere else!

"Oval Track, Spindles" Page 1 of 1

  • Speedway 1928-1948 Ford Forged Spindles Only
    Speedway 1928-1948 Ford Forged Spindles Only
    x
                

    These Speedway spindles are a one piece, drop forged design constructed of high strength 4140 steel, which makes them superior to original components. These spindles are modeled after the '37-'41 round-back design and use '37-'41 Ford kingpins. They  fit Ford axles from '28-'48 and can be used with period correct drum brakes or modern Speedway Motors disc brakes, but will not work with hubs from '28-'36.

    • Uses 1937-1941 kingpin kit
    • For Ford axles 1928-1948
    • Will not work with 1928-1936 Hubs

    Be sure to include our kingpin kit (91032121) with these spindles.

    Spindles also available in kit form with Standard or Deluxe kingpins.

    Spindle Identification Guide (GIF)

    910-32121 Instructions (PDF)

    910-32122 Instructions (PDF)

  • AFCO 100130 Precision Pinto Spindle, Right Hand Side
    AFCO 100130 Precision Pinto Spindle, Right Hand Side
    x
                AFCO's precision pinto spindle program has been  engineered to  provide precise, dimension perfect spindles to chassis  builders and  racers alike. When replacing a crashed precision spindle  from AFCO, you  can be assured that your front end geometry will not  change.
    • CNC Blue Printed to stock dimensions to be the same every time
    • Ball joint tapers CNC machined to align with each other
    • Ball joint axis CNC machined to align with spindle axis
    • Promotes precise front end geometry
    • Right hand side ONLY
    • Not IMCA approved
  • AFCO Spindle Savers
    $14.99
    Product Rating: 5.00 Stars
    AFCO Spindle Savers
    x
                

    Steel spindle savers are IMCA approved and built to last. Held in place by the ball joint and tie rod retaining nuts, they simply reinforce the steering arm portion of the spindle allowing you to get in more nights of racing. 

    Fit most '79 and up GM metric spindles (providing they are not bent already). 

    Sold in pairs. 

  • Garage Sale - AFCO Drag Race Spindles
    $189.99
    $279.99
    Garage Sale
    Garage Sale - AFCO Drag Race Spindles
    x
                

    • Accepts U.S. Brake, Wilwood or Aerospace brake kits
    • Available with caliper brackets
    • Same height as stock 71-73 pinto
    • Correct steering arm length with 1/2" rod end boss
    • Correct pin inclination and drop for drag applications
    • Uses 20034 ball joint (pinto taper)

     

    These spindles are garage sale priced because we no longer offer them.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - AFCO 1974-Up Pinto Spindle
    $149.99
    $239.99
    Garage Sale
    Garage Sale - AFCO 1974-Up Pinto Spindle
    x
                

    AFCO 1974-Up Pinto Spindle

     

    This Pinto Spindle is Garage Sale priced because it is different than what we currently offer.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Speedway 1928-1948 Ford Forged Spindles w/ King Pins
    Speedway 1928-1948 Ford Forged Spindles w/ King Pins
    x
                

    These Speedway spindles are one piece, drop forged design constructed of high strength 4140 steel, which makes them superior to original components. These spindles are modeled after the '37-'41 round-back design and use '37-'41 Ford king pins.

    These spindles fit Ford axles from '28-'48. They can be used with period correct drum brakes or modern Speedway Motors disc brakes, but will not work with hubs from '28-'36.

    • Uses 1937-1941 king pin kit
    • For Ford axles 1928-1948
    • Will not work with 1928-1936 Hubs
    • Includes king pin kit

    Be sure to include our spindle nut kit (910616004) to properly install these spindles.

    Spindle Identification Guide (GIF)

    910-32104 Instructions (PDF)

  • AFCO Pinto/Mustang II Spindles (Pair)
    AFCO Pinto/Mustang II Spindles (Pair)
    x
                

    AFCO Pinto/Mustang II spindles are 100% new forged steel (not re-worked OEM). Spindles are NOT stamped with Ford part number. For use on modifieds, sportsmans cars, drag cars and street cars.

    Brake brackets sold separately.

    Note Catalog Correction:  Spindle features a stock 10 deg pin inclination, not 7 deg as noted in previous catalog.

  • IMCA Approved Pinto-Mustang II Spindles
    IMCA Approved Pinto-Mustang II Spindles
    x
                Brand NEW, heat-treated forged Mustang II steel spindle that retains the exact OEM geometry of the 74-78 Mustang II or 74-80 Pinto spindle. This is the ONLY aftermarket spindle allowed by IMCA. Work great with our 10" HD Hybrid Rotors as well as with stock rotors, bearings, calipers, ect. Stock 7 5/8" height.  Easy to install.
            
  • Super Bell 1928-1948 Ford Spindles w/ King Pins Installed
    Super Bell 1928-1948 Ford Spindles w/ King Pins Installed
    x
                

    We carry the Super Bell spindles for 1928-'48 Ford cars. They require a bolt-on steering arm and come complete with king pins and bushings installed and fit.  These spindles are modeled after the '37-'41 round-back design and use '37-'41 Ford king pins.

    These spindles fit Ford axles from '28-'48. They can be used with period correct drum brakes or modern Speedway Motors disc brakes, but will not work with hubs from '28-'36.

    • Uses 1937-1941 kingpin kit
    • For Ford axles 1928-1948
    • Will not work with 1928-1936 Hubs
    • Includes kingpin kit

    Be sure to include our spindle nut kit (910616004) to properly install these spindles.

    Spindle Identification Guide (GIF)

     

  • Reconditioned 1980-90 GM Fullsize Spindle, Left
    Reconditioned 1980-90 GM Fullsize Spindle, Left
    x
                

    Reconditioned 1980-90 GM fullsize car (Impala/Caprice) spindles include a new outer bearing/race (#S34) which allows the spindle to be used with the 1973-77 midsize 11" diameter rotor. Can be used as a direct replacement for the 1973-77 midsize spindle when used with the included S34 bearing set.

    Note: Spindles are found on the metric fullsize GM 11" diameter. 5 x 4-3/4" bolt circle applications are not replacements for the 12" diameter. 5 x 5" bolt circle rotor/spindle applications.

  • Garage Sale - AFCO Precision Pinto Spindles, Pair
    Garage Sale
    Garage Sale - AFCO Precision Pinto Spindles, Pair
    x
                

    These spindles are garage sale priced because one of them has ball joint holes machined in it and the other does not.  What you see is what you get.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Mustang II Spindle - Left
    $99.99
    $114.99
    Garage Sale
    Garage Sale - Mustang II Spindle - Left
    x
                

    Brand NEW, heat-treated forged Mustang II steel spindle that retains the exact OEM geometry of the 74-78 Mustang II or 74-80 Pinto spindle. Work great with our 10" HD Hybrid Rotors as well as with stock rotors, bearings, calipers, ect. Stock 7 5/8" height. 7 degree pin inclination. Easy to install.

     

    Clearance!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

     

  • Garage Sale - RH Stock Stub Spindle - Bare
    $179.99
    $249.99
    Garage Sale
    Garage Sale - RH Stock Stub Spindle - Bare
    x
                

    AFCO RH Stock Stub Spindle - Bare

     

    Clearance!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

     

  • Spindle Savers
    $15.99
    Spindle Savers
    x
                If you are running metric spindles on your race car, you know how easily the steering arm bends.  You also know they are getting hard to find, and expensive.

    These spindle savers are IMCA approved and built to last and are held in place by the ball joint and tie rod retaining nuts.  They simply reinforce the steering arm portion of the spindle allowing you to get in more nights of racing.  Fit most 1979-Up GM metric spindles (providing they are not bent already).  Sold as a pair.

  • Garage Sale - 10 Degree Aluminum Lightweight Sprint Car Spindle
    Garage Sale
    Garage Sale - 10 Degree Aluminum Lightweight Sprint Car Spindle
    x
                

    MPD spindles are made of aircraft quality billet aluminum. Radiused on all outer edges to reduce weight and make them aesthetically pleasing. Kingpin inclination is 10° and is machined with 1/2” holes for steering arms.

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Garage Sale - AFCO Axle Tube Snout - Grand National 5X5
    Garage Sale
    Garage Sale - AFCO Axle Tube Snout - Grand National 5X5
    x
                

    Slip fit in GN 3" x 3/16" wall tubes

     

    These snouts are garage sale priced because they have some surface rust and can't be sold as firsts.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

     

  • Garage Sale - AFCO 30406B Rayburn Tall Spindle, No Bracket
    Garage Sale
    Garage Sale - AFCO 30406B Rayburn Tall Spindle, No Bracket
    x
                

    This is garage sale priced because it has been discontinued. 

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

     

    Right hand steel spindle for Rayburn chassis. These do not include a bracket. 

  • Garage Sale - 1974-Up Pinto Spindle
    $189.99
    $240.99
    Garage Sale
    Garage Sale - 1974-Up Pinto Spindle
    x
                

    AFCO 1974-Up Pinto Spindle

     

    This Spindle is Garage Sale priced because it is different than what we currently offer.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

     

  • Stock 1979-UP GM Intermediate Midsize Spindles
    Stock 1979-UP GM Intermediate Midsize Spindles
    x
                

    Our RECLAIMED OEM 1979-up midsize Metric chassis spindles have been thoroughly cleaned and inspected. Spindles use stock ball joints, Metric calipers, and the larger M12649 (Speedway 912-TS3) outer bearing.

    Use our '79-'81 rotor 910-31061.

  • Garage Sale - AFCO 109X Blue Spindle Stub Protector, GN
    Garage Sale
    Garage Sale - AFCO 109X Blue Spindle Stub Protector, GN
    x
                

    This is garage sale priced because it has been discontinued. 

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

     

    Don't let your spindles get damaged before they even hit the track. Buy some rubber spindle stub protectors.

     

    • 2.320" X 1.00" X .060"

     

  • AFCO IMCA Approved Pinto/Mustang II Spindle, Right
    AFCO IMCA Approved Pinto/Mustang II Spindle, Right
    x
                

    AFCO Pinto/Mustang II spindles are 100% new forged steel (not re-worked OEM). "IMCA" is forged on the spindle. For use on IMCA Modifieds, sportsmans cars, drag cars and street cars.

    Left and Right spindles sold individually. Brake brackets sold separately.

  • 1973-77 Intermediate GM Spindle, Left
    1973-77 Intermediate GM Spindle, Left
    x
                Reconditioned 1973-1977 intermediate GM spindles. Uses the larger bearings. 
    • 1973-1977 Midsize GM
    • 1970-1978 Camaro
  • AFCO 100129 Precision Pinto Spindle, Left Hand Side
    AFCO 100129 Precision Pinto Spindle, Left Hand Side
    x
                AFCO's precision pinto spindle program has been  engineered to  provide precise, dimension perfect spindles to chassis  builders and  racers alike. When replacing a crashed precision spindle  from AFCO, you  can be assured that your front end geometry will not  change.
    • CNC Blue Printed to stock dimensions to be the same every time
    • Ball joint tapers CNC machined to align with each other
    • Ball joint axis CNC machined to align with spindle axis
    • Promotes precise front end geometry
    • Left hand side ONLY
    • Not IMCA approved
  • Garage Sale - Sprint Car Titanium Spindle
    $199.99
    $279.99
    Garage Sale
    Garage Sale - Sprint Car Titanium Spindle
    x
                

    Sprint 10 deg. light weight spindle with the nut. Features a titanium snout.

    Actual photo!

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - AFCO Rayburn Tall Spindle
    $159.99
    $224.99
    Garage Sale
    Garage Sale - AFCO Rayburn Tall Spindle
    x
                

    These spindles are garage sale priced because they are different than what we currently offer.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

     

     

  • AFCO Precision Pinto Spindles - Pair
    AFCO Precision Pinto Spindles - Pair
    x
                AFCO's precision pinto spindle program has been  engineered to provide precise, dimension perfect spindles to chassis  builders and racers alike. When replacing a crashed precision spindle  from AFCO, you can be assured that your front end geometry will not  change.
    • CNC Blue Printed to stock dimensions to be the same every time
    • Ball joint tapers CNC machined to align with each other
    • Ball joint axis CNC machined to align with spindle axis
    • Promotes precise front end geometry
    • Sold in pairs
    • Not IMCA approved
  • Garage Sale - AFCO Rayburn Tall Spindles
    $199.99
    $249.99
    Garage Sale
    Garage Sale - AFCO Rayburn Tall Spindles
    x
                

    These spindles are garage sale priced because they are different than what we currently offer.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - AFCO Drag Spindle
    $189.99
    $249.99
    Garage Sale
    Garage Sale - AFCO Drag Spindle
    x
                

    This spindle is garage sale priced because it is discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - 1974-Up Pinto Spindle, Right Side Without Caliper Bracket
    Garage Sale
    Garage Sale - 1974-Up Pinto Spindle, Right Side Without Caliper Bracket
    x
                

    AFCO 1974-Up Pinto RH Spindle without caliper bracket

     

    These spindles are garage sale priced because they have been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

  • Garage Sale - AFCO Roundtube Spindle, No Brake Bracket
    Garage Sale
    Garage Sale - AFCO Roundtube Spindle, No Brake Bracket
    x
                

    This spindle is garage sale priced because it is different than what we currently carry.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - 1974-Up Pinto Spindle
    $169.99
    $240.99
    Garage Sale
    Garage Sale - 1974-Up Pinto Spindle
    x
                

    AFCO 1974-Up Pinto Spindle

     

    This Pinto Spindle is Garage Sale priced because it is different than what we currently offer.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

     

  • AFCO IMCA Approved Pinto/Mustang II Spindle, Left
    AFCO IMCA Approved Pinto/Mustang II Spindle, Left
    x
                

    AFCO Pinto/Mustang II spindles are 100% new forged steel (not re-worked OEM). "IMCA" is forged on the spindle. For use on IMCA Modifieds, sportsmans cars, drag cars and street cars.

    Left and Right spindles sold individually. Brake brackets sold separately.

  • Mustang II Steel Spindles
    $159.99
    Product Rating: 4.50 Stars
    Mustang II Steel Spindles
    x
                

    Heat treated forged steel spindle that retains stock factory geometry. Direct replacement for 1974-1980 Pinto/Bobcat and 1974-1978 Mustang II. Uses all stock rotors, bearings, calipers, etc. Stock height.

    910-34307 Instructions (PDF)

  • Garage Sale - AFCO Rayburn Wide Spindles
    $149.99
    $224.99
    Garage Sale
    Garage Sale - AFCO Rayburn Wide Spindles
    x
                

    These spindles are garage sale priced because they are different than what we currently offer.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Reconditioned 1980-90 GM Fullsize Spindle, Right
    Reconditioned 1980-90 GM Fullsize Spindle, Right
    x
                

    Reconditioned 1980-90 GM fullsize car (Impala/Caprice) spindles include a new outer bearing/race (#S34) which allows the spindle to be used with the 1973-77 midsize 11" diameter rotor. Can be used as a direct replacement for the 1973-77 midsize spindle when used with the included S34 bearing set.

    Note: Spindles are found on the metric fullsize GM 11" diameter. 5 x 4-3/4" bolt circle applications are not replacements for the 12" diameter. 5 x 5" bolt circle rotor/spindle applications.

  • Garage Sale - Reconditioned 1980-90 GM Fullsize Spindle, Left
    Garage Sale
    Garage Sale - Reconditioned 1980-90 GM Fullsize Spindle, Left
    x
                

    This spindle is garage sale priced because the snout is slightly bent.  Does not include spindle nut, washer or bearing set.  What you see is what you get.

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

    Reconditioned 1980-90 GM fullsize car (Impala/Caprice) spindle.  Can be used as a direct replacement for the 1973-77 midsize spindle when used with the S34 bearing set (not included). 

    Note: Spindles are found on the metric fullsize GM 11" diameter. 5 x 4-3/4" bolt circle applications are not replacements for the 12" diameter. 5 x 5" bolt circle rotor/spindle applications.

  • Reamed 1979-Up GM Intermediate Midsize Spindles
    Reamed 1979-Up GM Intermediate Midsize Spindles
    x
                

    These reclaimed OEM spindles are from 1979-up GM Metric midsize cars. The spindles have been thoroughly cleaned, inspected, and reamed for use with big ball joints (Chevy truck-style ball joints).

    • Upper Ball Joint use 917-20031 or 910-34323 (Moog# K6024 or K772) 
    • Lower Ball Joint use 917-20038 or 917-20038-1 (Moog# K6141 or K6117)

    Uses '78-'88 Metric style calipers and the larger M12649 outer bearing. Spindle will accept 5x5 rotor 910-31061 if used with bearing/seal kit 910-31048. Caliper mounting is 5.46" or approximately 5-7/16".

  • Speedway 1928-1948 Ford Forged Spindles w/ Deluxe King Pins
    Speedway 1928-1948 Ford Forged Spindles w/ Deluxe King Pins
    x
                

    These Speedway spindles are a one piece, drop forged design constructed of high strength 4140 steel, which makes them superior to original components. These spindles are modeled after the '37-'41 round-back design and use '37-'41 Ford kingpins. They fit Ford axles from '28-'48 and can be used with period correct drum brakes or modern Speedway Motors disc brakes, but will not work with hubs from '28-'36.

    Deluxe kingpins feature modern needle bearing inserts that replace the standard brass bushings and are ideal for use on heavier street rods that require superior strength, better lubrication and easier steering.

    • Uses 1937-1941 kingpin kit
    • For Ford axles 1928-1948
    • Will not work with 1928-1936 Hubs
    • Includes kingpin kit

    Be sure to include our spindle nut kit (910616004) to properly install these spindles.

    Spindle Identification Guide (GIF)

    910-32110 Installation Instructions (PDF)