Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Oval Track Ignitions At Speedway Motors

Speedway Motors is your number source for high performance racing ignition components. Our great assortment of HEI distributors, ignition boxes, and racing coils are sure to light your fire. Plus, Speedway stocks a complete listing of racing spark plugs for all popular applications.

"Oval Track, Spark Plugs, Wires and Accessories" Page 1 of 6

  • DEi 010502 Protect-A-Boot Spark Plug Boot Heat Shield, 6 Inch, Silver, 8 Pack
    DEi 010502 Protect-A-Boot Spark Plug Boot Heat Shield, 6 Inch, Silver, 8 Pack
    x
                

    Protect-A-Boots are made from a high temperature resistant glass fiber material and treated with a proprietary coating, Protect-A-Boots provide spark plug boot and wire protection from extreme under hood heat.

    • Double-wall construction for added durability
    • Helps prevent burn-through, hardening and cracking of boots
    • Installs in seconds
    • Universal-fits most straight or angled boots
    • Withstands 1200°F direct continuous heat
    • Non-flammable & protects against chemicals & resists water

    Protect-A-Boot Instructions (PDF)

    Exhaust Wrap Frequently Asked Questions (PDF)  

     

  • MSD 8860 Distributor to Ignition Box Cable Assembly
    MSD 8860 Distributor to Ignition Box Cable Assembly
    x
                When the time comes to replace those worn out or burned cables, MSD offers a complete selection of cables to fit your needs.
    • Connect your MSD ignition box to your distributor
    • 2 wire
    • 6'

    MSD Rebate (Link)

     

  • Moroso 62160 Spark Plug Indexer, 14MM
    Moroso 62160 Spark Plug Indexer, 14MM
    x
                

    High-compression drag race engines require “indexing” of spark plugs to prevent contact between piston dome and ground wire of the spark plugs. Moroso’s indexer, designed for both flat and taper-seat 14mm spark plugs, enables selection of spark plugs that will not make such contact. Once a given plug is selected (placed in a cylinder head and found to have the correct ground wire position), it is placed in the Moroso Plug Indexer and the position of the ground electrode marked on the black anodized surface. Marking provides a reference for checking other plugs to be used in the same cylinder.

    • Designed for both flat and tapered seat 14 mm spark plugs
    • Black anodized for easy marking
    • Hex-head design allows it to be held in a vise
  • Accel 1858 Red Heat Shrink Sleeves, 4 Pack
    Accel 1858 Red Heat Shrink Sleeves, 4 Pack
    x
                

    These red shrink tubes work perfect for sealing battery terminal connections.  They protect battery to cable connections by creating a water tight seal. 

    • Ideal for use on battery cable connections or spark plug wires
    • 4 sleeves in a kit at 4 inches long each
  • MSD 3414 Spark Plug Wire Markers, 8.5MM Wire
    MSD 3414 Spark Plug Wire Markers, 8.5MM Wire
    x
                

    These great little markers will save you time and ensure that the plug wires are always in the right place. They will withstand high underhood temperatures and work with 8.5mm wires. These plastic plug wire indicators are white with black lettering and are sold as a set. The Markers are also supplied on a trick orange tool that makes installation effortless.

    • Works with 8.5mm wires
    • Saves time and ensures correct wire location
    • Withstands high underhood temperatures
    • Makes installation effortless
    • Plastic material

    MSD Rebate (Link)

  • DEi 010512 Protect-A-Boot Spark Plug Boot Heat Shield, 6 Inch, Black, 8 Pack
    DEi 010512 Protect-A-Boot Spark Plug Boot Heat Shield, 6 Inch, Black, 8 Pack
    x
                

    Protect-A-Boots are made from a high temperature resistant glass fiber material and treated with a proprietary coating, Protect-A-Boots provide spark plug boot and wire protection from extreme under hood heat.

    • Double-wall construction for added durability
    • Helps prevent burn-through, hardening and cracking of boots
    • Installs in seconds
    • Universal-fits most straight or angled boots
    • Withstands 1200°F direct continuous heat
    • Non-flammable & protects against chemicals & resists water

    Protect-A-Boot Instructions (PDF)

    Exhaust Wrap Frequently Asked Questions (PDF)  

  • Taylor Cable 70051 8mm Spark Plug Wires, 90 Deg, Resistor Core, Black
    Taylor Cable 70051 8mm Spark Plug Wires, 90 Deg, Resistor Core, Black
    x
                The ultimate in spark plug wires for racing and serious street machines. Universal fit set will require cutting to fit, terminating, and booting the distributor end.  
    • High grade silicone over silicone resists temperatures up to 600° F
    • Color coordinated silicone boots add a touch of class
    • HEI boots have "Professional Grips" for easy on/off installation
    • Double locking spark plug terminals provide a firm grip
    • Resistor core for street applications
    • Universal fit for HEI and socket style caps

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Moroso 73220 Spiral Core Spark Plug Wires Set, 135 Degree Boot, Blue Max
    Moroso 73220 Spiral Core Spark Plug Wires Set, 135 Degree Boot, Blue Max
    x
                

    The superiority of Moroso Blue Max 8mm, 800 ohm spiral core wire comes from over 27 years of continual refinement. The combination of Moroso engineering expertise and a rigorous testing program makes this the finest ignition wire available for street or race. These spark plug wire sets are terminated at the plug end only and include enough wire length and terminals to fit HEI or Non-HEI distributors. You install the distributor ends. Wire color is blue.

    • Optimized combination of capacitance, inductance and resistance
    • Provides more spark energy and EMI protection than any other spiral core wire available
    • Eliminates interference with on-board electronics and provides static-free sound quality for car audio systems
    • Universal plug wire set fits HEI or socket style caps
    • Spark plug terminals and boots factory installed
    • You install distributor ends

    Spark Plug Wire Installation Instructions (PDF)

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • MSD 8843 Spark Plug Wire Separators, Pro-Clamp
    MSD 8843 Spark Plug Wire Separators, Pro-Clamp
    x
                

    Separate your plug wires to keep them from arcing across one another with these MSD Pro-Clamp wire separators.

    Set is supplied with two 4-wire, two 3-wire, and four 2-wire separators.

    MSD Rebate (Link)

  • DEi 010511 Protect-A-Boot Spark Plug Boot Heat Shield, 6 Inch, Black, 2 Pack
    DEi 010511 Protect-A-Boot Spark Plug Boot Heat Shield, 6 Inch, Black, 2 Pack
    x
                

    Protect-A-Boots are made from a high temperature resistant glass fiber material and treated with a proprietary coating, Protect-A-Boots provide spark plug boot and wire protection from extreme under hood heat.

    • Double-wall construction for added durability
    • Helps prevent burn-through, hardening and cracking of boots
    • Installs in seconds
    • Universal-fits most straight or angled boots
    • Withstands 1200°F direct continuous heat
    • Non-flammable & protects against chemicals & resists water

    Protect-A-Boot Instructions (PDF)

    Exhaust Wrap Frequently Asked Questions (PDF)  

  • Spark Plug Boot Protectors, Set/8
    Spark Plug Boot Protectors, Set/8
    x
                Spark plug protector eliminates that melted boot problem! Heat treated fiberglass, universal size fits most boots - even 90°. Protects up to 1200°. Non-flammable, non-reactive to petroleum products and resists water and fungus. Overall length is 6.25".
            
  • Taylor Cable 70251 8mm Spark Plug Wires, 90 Degree, Red, Resistor Core
    Taylor Cable 70251 8mm Spark Plug Wires, 90 Degree, Red, Resistor Core
    x
                The ultimate in spark plug wires for racing and serious street machines. Universal fit set will require cutting to fit, terminating, and booting the distributor end.   
    • High grade silicone over silicone resists temperatures up to 600° F
    • Color coordinated silicone boots add a touch of class
    • HEI boots have "Professional Grips" for easy on/off installation
    • Double locking spark plug terminals provide a firm grip
    • Resistor core for street applications
    • Universal fit for HEI and socket style caps

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • MSD 5554 Street-Fire Spark Plug Wires Set, Small Block Chevy 350 HEI
    MSD 5554 Street-Fire Spark Plug Wires Set, Small Block Chevy 350 HEI
    x
                

    Street Fire low resistance spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery. Street Fire spark plug wires have the quality you've come to expect from MSD Ignition at a price that's comparable to other brands. They feature spiral-wound, low-resistance conductors and high EMI suppression capabilities, with 90 degree boots.

    • Long enough to go over valve covers
    • Helically wound conductor suppresses electro and radio noise
    • Kevlar core combination for great strength and durability
    • Heavy duty terminals for secure connection
    • 8mm silicone and synthetic jacket resists heat and abrasion
    • 500 ohms per foot resistance for improved spark delivery and power
    • Silicone boots protect against high exhaust temps
    These wires are for S/B Chevys with an HEI cap and are designed to be routed over the valve covers.
     
  • Taylor Cable 76240 8mm Spark Plug Wires-Solid Core-Under Headers-90  -Red
    Taylor Cable 76240 8mm Spark Plug Wires-Solid Core-Under Headers-90 -Red
    x
                

    Taylor Cable’s 8mm Spiro-Pro Series outperforms the competition in both looks and performance at a price you can afford. Spiro-Pro is simply a top of the line high performance 8mm ignition wire and is an excellent choice for race only applications with it's solid wire core.

    • High grade silicone over silicone resists temperatures up to 600°
    • Color coordinated silicone boots add a touch of class
    • HEI boots have "Professional Grips" for easy on/off installation
    • Double spring locking spark plug terminals provide a firm grip
    • Wire core for racing applications
    • Use with magnetos and point style ignition systems (non electronic)
    • Fully assembled
    • Coil wire is 35" long and requires final assembly
  • Accel 0114-4 14mm U-Groove Spark Plug-13/16 Hex, 3/4 Reach Gasket Seat
    Accel 0114-4 14mm U-Groove Spark Plug-13/16 Hex, 3/4 Reach Gasket Seat
    x
                

    Accel's patented U-groove design provides a hotter spark and increased horsepower. 

    U-Groove Benefits:

    • More power to the wheels
    • Improved ignitability
    • Improved throttle response and fuel efficiency
    • Develops larger spark nucleus for improved combustion and reduced fouling 
  • Autolite AR134 14mm Spark Plug-5/8 Hex Taper Seat .46-Slightly Hotter
    Autolite AR134 14mm Spark Plug-5/8 Hex Taper Seat .46-Slightly Hotter
    x
                

    Autolite Racing spark plugs feature a cut back ground electrode, anti-corrosive nickel plating, and large ground electrode for better heat transfer. Heat range Slightly Hotter. 

    • Standard tip
    • 14 mm plug
    • .460" reach
    • 5/8" hex
    • Tapered seat
    • Non-resistor
    • Vendor Number: AR134

    Note: Please use the Vendor Number to reference the PDF chart links listed.

    Heat Range Chart (PDF)

    Racing Plug Tech Note (PDF)

    Understanding Heat Range (PDF)

    Autolite Cross Reference Chart (PDF)

  • MSD 35599 8.5mm Spark Plug Wires Set, S/B Chevy HEI, Under Headers
    MSD 35599 8.5mm Spark Plug Wires Set, S/B Chevy HEI, Under Headers
    x
                

    What makes or breaks a plug wire is not only how well the wire is insulated, but how low of resistance the center core has. These assembled wire sets test 40-50 ohms per foot, while most others test 1500 ohms per foot.

    These low resistance spark plug wires are designed for Small Block Chevys with HEI and are routed under the headers. 

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

    MSD Rebate (Link)

  • Autolite AR133 14mm Racing Spark Plug-5/8 Hex, Tapered, .46 Reach, Med
    Autolite AR133 14mm Racing Spark Plug-5/8 Hex, Tapered, .46 Reach, Med
    x
                

    Autolite Racing spark plugs feature a cut back ground electrode, anti-corrosive nickel plating, and large ground electrode for better heat transfer. Heat range Medium. 

    • Standard tip
    • 14 mm plug
    • .460" reach
    • 5/8" hex
    • Tapered seat
    • Non-resistor
    • Vendor Number: AR133

    Note: Please use the Vendor Number to reference the PDF chart links listed.

    Heat Range Chart (PDF)

    Racing Plug Tech Note (PDF)

    Understanding Heat Range (PDF)

    Autolite Cross Reference Chart (PDF)

  • Autolite AR132 14mm Spark Plug-5/8 Hex Taper Seat .46-Slightly Colder
    Autolite AR132 14mm Spark Plug-5/8 Hex Taper Seat .46-Slightly Colder
    x
                

    Autolite Racing spark plugs feature a cut back ground electrode, anti-corrosive nickel plating, and large ground electrode for better heat transfer. Heat range Slightly Colder. 

    • Standard tip
    • 14 mm plug
    • .460" reach
    • 5/8" hex
    • Tapered seat
    • Non-resistor
    • Vendor Number: AR132

    Note: Please use the Vendor Number to reference the PDF chart links listed.

    Heat Range Chart (PDF)

    Racing Plug Tech Note (PDF)

    Understanding Heat Range (PDF)

    Autolite Cross Reference Chart (PDF)

  • MSD 31359 8.5mm Spark Plug Wires Set, Chevy HEI, Over Valve Cover
    MSD 31359 8.5mm Spark Plug Wires Set, Chevy HEI, Over Valve Cover
    x
                

    The MSD 8.5mm Super Conductor Wire is "the" performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of low resistance spark plug wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire.

    To accomplish this, MSD uses a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears.

    MSD Rebate (Link)

     

  • NGK Spark Plug for GM 602 Racing Crate Motors
    NGK Spark Plug for GM 602 Racing Crate Motors
    x
                Every NGK spark plug is designed to withstand severe mechanical and thermal shock  associated with these high-revving, high-compression race crate engines.
            
  • Taylor Cable 70255 8mm Spark Plug Wires, Straight, Resistor Core, Red
    Taylor Cable 70255 8mm Spark Plug Wires, Straight, Resistor Core, Red
    x
                Taylor 8mm Pro Wires are the ultimate in spark plug wires for racing and serious street machines. 
    • High grade silicone over silicone resists temperatures up to 600°
    • Color coordinated silicone boots add a touch of class
    • HEI boots have "Professional Grips" for easy on/off installation
    • Double spring locking spark plug terminals provide a firm grip
    • Resistor core for street applications
    • Universal fit for HEI or Socket style caps

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • MSD 5564 Street-Fire Spark Plug Wires, S/B Chevy, Stock Cap, Under Manifold
    MSD 5564 Street-Fire Spark Plug Wires, S/B Chevy, Stock Cap, Under Manifold
    x
                

    Street Fire spark plug wires have the quality you've come to expect from MSD Ignition at a price that's comparable to other brands. They feature spiral-wound, low-resistance conductors and high EMI suppression capabilities, all wrapped in simple, durable black sleeves and boots.  Fully assembled wires designed for S/B Chevys with points style stock socket cap. Routed under the headers.  

    • Helically wound conductor suppresses electro and radio noise
    • Kevlar core combination for great strength and durability
    • Heavy duty terminals for secure connection
    • 8mm silicone and synthetic jacket resists heat and abrasion
    • 500 Ohms per foot resistance for improved spark delivery and power
    • Silicone boots protect against high exhaust temps

    MSD Rebate (Link)

  • Accel 8023 8.8 Spiral Core Spark Plug Wires, HEI, Straight Boot
    Accel 8023 8.8 Spiral Core Spark Plug Wires, HEI, Straight Boot
    x
                

    Makes power, not static.  With today's mega-watt, ultra-sensitive car stereo systems, that means "hiss-free" high fidelity. Thanks to a special graphite-impregnated fiberglass conductor, ACCEL 8.8 wire has the structural integrity to handle the high performance that can cause other wires to self-destruct.  Yellow only.

    • Rated to 550 degrees F
    • 8.8mm yellow high temp silicone jacket
    • For race and street applications
    • 500 ohm/ft. RFI suppression
    • Red plug boots

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Champion 670 V59C 14mm Racing Spark Plug-.46 In Reach, 5/8 In Hex, Hot
    Champion 670 V59C 14mm Racing Spark Plug-.46 In Reach, 5/8 In Hex, Hot
    x
                

    Champion Racing Series plugs include all the features of their conventional plugs, but are built with extreme engine conditions and durability in mind.  For GM & Ford cast iron cylinder heads and some OE design aluminum heads. Will not fit GT40 heads.

    • Nickel Alloy Ground and Center Electrodes
    • Copper Core Center Electrode Allows for Increased Conductivity and Heat Control
    • Peanut Plug
    • 14mm, .460" reach, 5/8" hex
    • Projected Tip
    • Heat Range: Hot (59)

    Champion Spark Plug Guide (GIF)

    Champion Heat Range Guide (GIF)

    Champion Conversion Chart (GIF)

    Spark Plug Gapping Instructions (GIF)

    Autolite, Champion, NGK Cross Reference Chart (PDF)

  • Taylor Cable 76640 8mm Solid Core Wires, Under Headers, HEI, 90  , Blue
    Taylor Cable 76640 8mm Solid Core Wires, Under Headers, HEI, 90 , Blue
    x
                

    Taylor Cable’s 8mm Spiro-Pro Series outperforms the competition in both looks and performance at a price you can afford. Spiro-Pro is simply a top of the line high performance 8mm ignition wire and is an excellent choice for race only applications with it's solid wire core.

    • High grade silicone over silicone resists temperatures up to 600°
    • Color coordinated silicone boots add a touch of class
    • HEI boots have "Professional Grips" for easy on/off installation
    • Double spring locking spark plug terminals provide a firm grip
    • Wire core for racing applications
    • Use with magnetos and point style ignition systems (non electronic)
    • Fully assembled
    • Coil wire is 35" long and requires final assembly
  • Champion 723 N57DR 14mm Alky Race Spark Plug-13/16 Hex-.75 Reach-Cold
    Champion 723 N57DR 14mm Alky Race Spark Plug-13/16 Hex-.75 Reach-Cold
    x
                Please view the product's page for more information
            
  • Taylor Cable 70650 8mm Spark Plug Wires, 90 Deg Boot, Wire Core, Blue
    Taylor Cable 70650 8mm Spark Plug Wires, 90 Deg Boot, Wire Core, Blue
    x
                Taylor 8mm Pro Wires are the ultimate in spark plug wires for serious racing machines. 
    • High grade silicone over silicone resists temperatures up to 600°
    • Color coordinated silicone boots add a touch of class
    • HEI boots have "Professional Grips" for easy on/off installation
    • Double spring locking spark plug terminals provide a firm grip
    • Wire core for racing applications
    • Universal fit for HEI and socket style caps 

    Recommended for use with Vertex Magnetos.

    8mm Pro Wire Application Chart (GIF)

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Taylor Cable 70250 8mm Spark Plug Wires, Wire Core, 90 Degree, Red
    Taylor Cable 70250 8mm Spark Plug Wires, Wire Core, 90 Degree, Red
    x
                Taylor 8mm Pro Wires are the ultimate in spark plug wires for serious racing machines. 
    • High grade silicone over silicone resists temperatures up to 600°
    • Color coordinated silicone boots add a touch of class
    • HEI boots have "Professional Grips" for easy on/off installation
    • Double spring locking spark plug terminals provide a firm grip
    • Wire core for racing applications
    • Universal fit for HEI and socket style caps 

    Recommended for use with Vertex Magnetos.

    8mm Pro Wire Application Chart (GIF)

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Taylor Cable 70655 8mm Spark Plug Wires, Straight, Resistor Core, Blue
    Taylor Cable 70655 8mm Spark Plug Wires, Straight, Resistor Core, Blue
    x
                Taylor 8mm Pro Wires are the ultimate in spark plug wires for racing and serious street machines. 
    • High grade silicone over silicone resists temperatures up to 600°
    • Color coordinated silicone boots add a touch of class
    • HEI boots have "Professional Grips" for easy on/off installation
    • Double spring locking spark plug terminals provide a firm grip
    • Resistor core for street applications
    • Universal fit for HEI or Socket style caps

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Shim-Dex Spark Plug Shims, 24 Pack
    Shim-Dex Spark Plug Shims, 24 Pack
    x
                These stackable spark plug shims rotate the ground of the spark plug at 30 degree intervals anywhere within 360 degrees so that you get the most out of your spark plugs without causing overheat and pre-ignition due to thread exposure.
    • Shim-Dex shims rotate the ground of the spark plug at 30 degree intervals anywhere within 360 degrees
    • You won't have to buy extra spark plugs to have them perfectly indexed
    • Shim-Dex shims are reusable many times over
    • Minimal or no thread exposure in the cylinder head that can overheat and cause pre-ignition
    • Shim-Dex shims are so thin they will not adjust the gap too far out of the combustion chamber and negatively affect performance
    • Pack includes 12 silver 60 degree shims and 12 black 90 degree shims

    Indexing Your Spark Plugs (PDF)

  • Champion 841 J8C Racing Spark Plug-Gas, 3/8 Reach, 13/16 Inch Hex, Hot
    Champion 841 J8C Racing Spark Plug-Gas, 3/8 Reach, 13/16 Inch Hex, Hot
    x
                Please view the product's page for more information
            
  • Autolite AR94  Spark Plug-5/8 Hex, .708 Reach, Tapered, Power Tip, Hot
    Autolite AR94 Spark Plug-5/8 Hex, .708 Reach, Tapered, Power Tip, Hot
    x
                

    Autolite Racing spark plugs feature a cut back ground electrode, anti-corrosive nickel plating, and large ground electrode for better heat transfer. Heat range Hot. 

    • Power Tip
    • 14mm plug
    • .708" reach
    • 5/8 hex
    • Tapered seat
    • Non-resistor
    • Vendor Number: AR94

    Note: Please use the Vendor Number to reference the PDF chart links listed.

    Heat Range Chart (PDF)

    Racing Plug Tech Note (PDF)

    Understanding Heat Range (PDF)

    Autolite Cross Reference Chart (PDF)

     

  • Champion 668 V55C 14mm Alky Spark Plug, .46 Reach 5/8 Inch Hex, Colder
    Champion 668 V55C 14mm Alky Spark Plug, .46 Reach 5/8 Inch Hex, Colder
    x
                

    Champion Racing Series plugs include all the features of their conventional plugs, but are built with extreme engine conditions and durability in mind.  For GM & Ford cast iron cylinder heads and some OE design aluminum heads. Will not fit GT40 heads.

    • Nickel Alloy Ground and Center Electrodes
    • Copper Core Center Electrode Allows for Increased Conductivity and Heat Control
    • Peanut Plug
    • 14mm, .460" reach, 5/8" hex
    • Projected Tip
    • Recommended for Alcohol
    • Heat Range: Colder (55)

    Champion Spark Plug Guide (GIF)

    Champion Heat Range Guide (GIF)

    Champion Conversion Chart (GIF)

    Spark Plug Gapping Instructions (GIF)

    Autolite, Champion, NGK Cross Reference Chart (PDF)

  • Accel 9000C Ceramic Spark Plug Wires, Straight, Extreme 9000, Universal
    Accel 9000C Ceramic Spark Plug Wires, Straight, Extreme 9000, Universal
    x
                

    Accel offers the cure for burnt spark plug wire boots with the Extreme 9000 Series Ceramic Wire kits. These 8mm spiral core spark plug wires have ceramic boots on the spark plug end of the wires which makes it impossible to melt or burn boots. If you are running headers with close tolerances, have an engine bay with little room or an RV with boots that melt because of heat, these wire kits are the answer for burnt and melting boots.

    • 8mm Ferro-Spiral EMI/RFI suppression core
    • 500 Ohms/ft resistance
    • Straight ceramic boots will withstand 2000° F
    • Stainless terminals
    • Includes ends for HEI (male) and socket (female) distributors

    Ceramic Wire Core Cut-A-Way (Link)

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Accel 8021 8.8 Spiral Core Spark Plug Wires, HEI, 90 Degree Boot
    Accel 8021 8.8 Spiral Core Spark Plug Wires, HEI, 90 Degree Boot
    x
                

    Makes power, not static.  With today's mega-watt, ultra-sensitive car stereo systems, that means "hiss-free" high fidelity. Thanks to a special graphite-impregnated fiberglass conductor, ACCEL 8.8 wire has the structural integrity to handle the high performance that can cause other wires to self-destruct.  Yellow only.

    • Rated to 550 degrees F
    • 8.8mm yellow high temp silicone jacket
    • For race and street applications
    • 500 ohm/ft. RFI suppression
    • Red plug boots

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

Goto Previous PagePrevious Page
1 2 3 4 5 6