Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 50

Products

Shocks, Coilovers and Accessories

Speedway Motors is the winner's choice for racing suspension and steering components! Speedway stocks the absolute best in racing shocks, coil-overs, and racing coil springs. Check out our assortment of IMCA-approved tubular control arms and spindles. For the rear suspension, combine our racing leaf springs with an adjustable pull bar and panhard bar for improved traction. Mount your Grand National 9'' Ford or quickchange rearend with quality Speedway birdcages, swedged rods and heims. With so many choices of power steering pumps, boxes and U-joints, you won't need to shop anywhere else!

Featured Products
  • Pro Shocks SS100 PRO Street Stock Shock, Front, Non-Adjustable
    Pro Shocks SS100 PRO Street Stock Shock, Front, Non-Adjustable
    (Part #582SS100)
    x
                

    Pro street stock shocks are designed to replace the stock shocks in the original mounting locations. Non-adjsutable design featues extra heavy damping designed for the punishment of street stock racing.

    Pro Shock Application Chart (GIF)

  • Speedway Shock Bump Rubber, Red, Soft
    Speedway Shock Bump Rubber, Red, Soft
    (Part #570BR28)
    x
                

    These bump rubbers fit on your shocks to prevent them from bottoming out and getting damaged on a rough track. They’re cheap insurance for expensive shocks.

    • Fits most racing shocks with 5/8" shaft 
    • Durable hardened rubber construction
    • Easy installation
    • Superior protection
  • Ohlins 01255-18 Standard Length Shock End for LMJ Series Shocks
    New
    Ohlins 01255-18 Standard Length Shock End for LMJ Series Shocks
    (Part #5531255.18)
    x
                

    Ohlins is a company that understands the importance of making products that achieve safety, quality, and superior performance. This standard length LMJ shock series end assembly will give you just what you need to perform.

    • Standard Length Shock End for LMJ Series Shocks
    • Sold Individually
    • Achieves Safety, Quality, and Excellent Performance


  • Shock Mount Studs
    $3.99
    Product Rating: 4.87 Stars
    Shock Mount Studs
    (Part #91036096)
    x
                

    Shock mounting stud is approximately 3-5/8" in overall length. The part where the shock rides, is 5/8" O.D. and approximately 1-1/4" wide and the threads at the shock end are 7/16"-20, about 7/8" long. The threads at the bracket end are 1/2"-20, about 1-1/8" long.

    Studs sold individually.

     

  • Speedway Weld-On Lower Mount for Bearing End Shocks
    Speedway Weld-On Lower Mount for Bearing End Shocks
    (Part #91721000)
    x
                Weld-on shock mount for bearing end shocks (spherical bearing or heim). Has a 1/2" hole. Use short pin in place of shock bolt on this bracket.
            
  • AFCO Tubular Strut Rod End, 3/4 Inch LH Thread
    AFCO Tubular Strut Rod End, 3/4 Inch LH Thread
    (Part #10620051)
    x
                
    • Bolt to common late model lower control arms
    • Available in 3/4" LH thread
  • AFCO 20068-6 Aluminum Spring Rod Slide Rod Housing
    AFCO 20068-6 Aluminum Spring Rod Slide Rod Housing
    (Part #106200686)
    x
                

    Assorted AFCO Aluminum Spring Rod service/replacement parts.

    Spring Rod Exploded View (GIF)

  • Ohlins 01054-27M Extended Length Shock End for LMJ Series Shocks, 1 Inch
    New
    Ohlins 01054-27M Extended Length Shock End for LMJ Series Shocks, 1 Inch
    (Part #5531054.27M)
    x
                

    Ohlins is a company that understands the importance of making products that achieve safety, quality, and superior performance. This 1 inch LMJ shock series end assembly will give you just what you need to perform.

    • 1 Inch Extended Length Shock End for LMJ Series Shocks
    • Sold Individually
    • Achieves Safety, Quality, and Excellent Performance


Filter

"Oval Track, Shocks, Coilovers and Accessories" Page 1 of 50

Page 1 of 50

  • Pro Shocks WB74BK Large Body Steel Shock, 7 Inch Stroke, Comp 4/Reb 4
    Pro Shocks WB74BK Large Body Steel Shock, 7 Inch Stroke, Comp 4/Reb 4
    (Part #582WB74BK)
    x
                

    The newly redesigned PRO WB series steel shocks now feature hardened shafts with a removable rod end while still maintaining their superior, yet economical gas cell design.  A snap ring groove has also been added to allow the use of a coilover kit.  These are ideal for IMCA Modified-type race cars.

    • Compression Length: 13", Extension Length: 20"
    • Compression 4, Rebound 4

    Pro Welded Bearing Shock Chart Application (GIF)

    Notes

    Do not attempt to modify or add snap ring grooves as this will cause the shock absorber to leak.  Pro will not warranty any shocks with added or modified grooves.
  • Bilstein XVS Series Non-Base Valve COB Shock Absorbers
    Bilstein XVS Series Non-Base Valve COB Shock Absorbers
    (Part #21357)
    x
                These new Bilstein XVS Series non-base valve COB shocks feature a 46mm steel body and are designed for Late Models and Modifieds.  They are completely racer rebuildable and revalvable.  These shocks are available with a gas pressure setting for either low, standard, or high.  This helps control cavitation and can promote "hike".
    • 46mm steel body monotube shocks designed for, but not limited to, Late Models and Modifieds
    • Extreme volume nitrogen bulb minimizes rod pressure gain
    • Zinc plated for rapid heat dissipation
    • COB valving without base valve
    • Completely racer rebuildable and revalvable
    • Coil over compatible
    • Specify stroke, rebound, compression, and with low, standard , or high gas pressure
    • Bilstein XVS Shock Options
    Note:  Gas - Gas pressure   

    Low, Std., or High - Helps control cavitation and can promote "hike"
  • AFCO Silver 58 Series Gas Bulb Shocks, IMCA Approved
    AFCO Silver 58 Series Gas Bulb Shocks, IMCA Approved
    (Part #10658)
    x
                

    AFCO Silver 58 Series Bulb Shocks feature a bulb design for reduced gas pressure gain and increased feel for worry-free racing.

    • Ultra-strong DURox chrome shaft
    • Owner serviceable
    • Easily tuned for any track condition
    • Without base valve, IMCA approved

    Tuning Guide (PDF)

  • Bilstein SNSL Series Custom Linear Shock
    Bilstein SNSL Series Custom Linear Shock
    (Part #213SNSL)
    x
                Exclusively at Speedway Motors you can now order your custom Bilstein shocks online!
    • Shock of choice for Wissota and UMP racers
    • Linear valving
    • Nickel plated for rapid heat dissipation
    • World class performance at a SN (Saturday Night) price
    • Bilstein's famous consistent, fade-free performance
    • 46mm (1.81") diameter steel body
    • Steel Cap with Schrader Valve
    • 7 or 9" Stroke
    Designed for, but not limited to:  Modifieds, Late Models, and Sprint Cars.

    Choose:
    • Length - 7 or 9"
    • Compression Valving - 0.5-10 (.5 increments)
    • Rebound Valving - 0.5-10 (.5 increments)
    • Bleed - Soft or Mid
  • AFCO 20020K OEM Tubular Arm Bushing Kit
    AFCO 20020K OEM Tubular Arm Bushing Kit
    (Part #10620020K)
    x
                OEM Tubular Arm Bushing Kit

    UMP Approved

  • Pro Shocks WB76BK Large Body Steel Shock, 7 Inch Stroke, Comp 6/Reb 6
    Pro Shocks WB76BK Large Body Steel Shock, 7 Inch Stroke, Comp 6/Reb 6
    (Part #582WB76BK)
    x
                

    The newly redesigned PRO WB series steel shocks now feature hardened shafts with a removable rod end while still maintaining their superior, yet economical gas cell design.  A snap ring groove has also been added to allow the use of a coilover kit.  These are ideal for IMCA Modified-type race cars.

    • Compression Length: 13", Extension Length: 20"
    • Compression 6, Rebound 6

    Pro Welded Bearing Shock Chart Application (GIF)

    Notes

    Do not attempt to modify or add snap ring grooves as this will cause the shock absorber to leak.  Pro will not warranty any shocks with added or modified grooves.
  • Pro Shocks WB791BK WB Large Steel Shock, 7 Inch Stroke, Comp 9/Reb 1
    Pro Shocks WB791BK WB Large Steel Shock, 7 Inch Stroke, Comp 9/Reb 1
    (Part #582WB791BK)
    x
                

    The newly redesigned PRO WB series steel shocks now feature hardened shafts with a removable rod end while still maintaining their superior, yet economical gas cell design.  A snap ring groove has also been added to allow the use of a coilover kit.  These are ideal for IMCA Modified-type race cars.

    • Compression Length: 13", Extension Length: 20"
    • Compression 9, Rebound 1

    Pro Welded Bearing Shock Chart Application (GIF)

    Notes

    Do not attempt to modify or add snap ring grooves as this will cause the shock absorber to leak.  Pro will not warranty any shocks with added or modified grooves.
  • QA1 5193 51 Series Steel Twin Tube 9 Inch Shock, Comp/Reb 3/3
    QA1 5193 51 Series Steel Twin Tube 9 Inch Shock, Comp/Reb 3/3
    (Part #7215193)
    x
                
    The best keep getting better! QA1 has taken your feedback, added new technology and developed an improved 50 Series shock absorber - the 51 Series. QA1’s 51 Series features a brand new in-house machined body, which has a large inside diameter for easy installation of gas bags. This twin tube shock absorber features hard anodized internals and has a zero gas pressure design providing the most grip on slick tracks and the best feel of any shock. Available in nine inch strokes, the 51 Series is the premium twin tube choice for dirt and asphalt modifieds, late models and super stocks. The 51 Series is manufactured in QA1’s Lakeville, MN facility and is completely racer rebuildable and revalveable.
    • Racer Revalveable & Rebuildable
    • Can Be Run Upside Down
    • Length - 9"   

    Note: Be sure to check compressed and extended lengths carefully for proper fit. QA1 lengths do not necessarily correspond to competitors’ lengths.

    QA1 also offers these shocks in packages specific to a variety of series. Contact QA1 for more information.

    Notes

    Additional Piston Option: QA1 also offers a brand new high-flow linear two port piston for the 51 Series as an additional accessory. This two port piston design allows

  • Speedway DSR Crate Engine A-Mod Shock Package
    Speedway DSR Crate Engine A-Mod Shock Package
    (Part #91095003)
    x
                Please view the product's page for more information
            
  • CSI 8 Inch Twin Tube Eye Adjustable Shock, Partial Build
    CSI 8 Inch Twin Tube Eye Adjustable Shock, Partial Build
    (Part #940128121)
    x
                

    The RS-12 Twin Tube Eye Adjustable shock is a single adjustable shock. The eye adjustable shock features CSI's optimum flow billet piston design, low drag seals, tuned base valve assembly and our friction reducing “Gold” shaft coating.

    When the time is right to go cock pit adjustable, all you need to purchase is the adapter and cock pit adjuster assembly, in minutes you will be ready to go.

    All of our twin tube shocks are assembled with the finest synthetic racing shock oil and dyno tuned for optimum performance.  We have spent a lot of time reducing friction to improve the overall performance of the shock and minimize fade.

     Twin Tube Eye Adjustable Shock

    • Includes 2013 Optimum Flow piston
    • Everything needed to complete the shock minus the shims and oil
    • Upgrade to linear/digressive pistons and cockpit adjustable
    • Contact our Suspension Service Center to finish shocks to your exact specifications or Click Here to go to our shock rebuild page.
  • QA1 5195-3 51 Series Steel Twin Tube 9 Inch Shock, Comp/Reb 5/3
    QA1 5195-3 51 Series Steel Twin Tube 9 Inch Shock, Comp/Reb 5/3
    (Part #72151953)
    x
                
    The best keep getting better! QA1 has taken your feedback, added new technology and developed an improved 50 Series shock absorber - the 51 Series. QA1’s 51 Series features a brand new in-house machined body, which has a large inside diameter for easy installation of gas bags. This twin tube shock absorber features hard anodized internals and has a zero gas pressure design providing the most grip on slick tracks and the best feel of any shock. Available in nine inch strokes, the 51 Series is the premium twin tube choice for dirt and asphalt modifieds, late models and super stocks. The 51 Series is manufactured in QA1’s Lakeville, MN facility and is completely racer rebuildable and revalveable.
    • Racer Revalveable & Rebuildable
    • Can Be Run Upside Down
    • Length - 9"   

    Note: Be sure to check compressed and extended lengths carefully for proper fit. QA1 lengths do not necessarily correspond to competitors’ lengths.

    QA1 also offers these shocks in packages specific to a variety of series. Contact QA1 for more information.

    Notes

    Additional Piston Option: QA1 also offers a brand new high-flow linear two port piston for the 51 Series as an additional accessory. This two port piston design a

  • Front Shock Rubber Bushing Kit
    Front Shock Rubber Bushing Kit
    (Part #91032119)
    x
                
    • Includes bushing, 3/8" nut and washers
    • For stud style front shocks
  • AFCO 22 Series Custom Racing Shock
    $169.99
    $194.99
    AFCO 22 Series Custom Racing Shock
    (Part #106220)
    x
                

    Exclusively at Speedway Motors you can now order your custom AFCO Circle/Oval Dirt Track Racing shocks online!

    AFCO R-Series Twin-Tube Shocks are packed with quality, performance and value, all inside a rebuildable steel body. All internal parts of the AFCO Steel Take-A-Part shocks are identical to the components inside the aluminum body shocks, so you can expect the highest levels of performance and durability.

    AFCO Steel Body Take-A-Part Shocks let you meet your "steel shock rule" and still allow you to run the most precise shock in the industry. With the Take-A-Part, you are no longer limited to "off the shelf valves," and you can have the performance of your used shocks brought back to full factory spec with a rebuild rather than having to purchase a new shock.

    The small body steel Take-A-Part offers substantial weight savings as well as added clearance for suspension hardware and frame.  In fact, the small body is 36% lighter than standard 2.03 size shocks of the same stroke.  Also features a durable gloss finish for long life. All AFCO R-Series Shocks are 100% dyno tested, rebuildable and revalvable.

    Choose:

    • Compression Valving - 0-13
    • Rebound Valving - 0-13
  • Speedthane 223527 Red Bump Stop, 2-1/4 Inch Height, Soft
    Speedthane 223527 Red Bump Stop, 2-1/4 Inch Height, Soft
    (Part #106223527)
    x
                
    • Micro-Cellular Polyurethane material (MCU)
    • Consistently outperforms any other material currently available
    • Lasts 3-4 times longer than rubber in durability testing
    • Fine tune chassis movement and handling
    • Superior resistance to oils, grease, brake fluid, fuels
  • AFCO 24 Series Custom Racing Shock
    AFCO 24 Series Custom Racing Shock
    (Part #106240)
    x
                

    Exclusively at Speedway Motors you can now order your custom AFCO Circle/Oval Dirt Track Racing shocks online!

    Speedway Motors is proud to be the first to announce the release of AFCO's newly designed steel body gas shocks. These new shocks have all the sophistication of our deflective disc technology wrapped up in an economical & rule friendly, non-adjustable package. These are sure to be the answer for any racer under constraints to experience gas shocks.

    The new Steel Body 24 Series Gas Shock uses a Floating Piston Design. They are rebuildable and serviceable through an authorized Afco shock rebuild center, and are available in straight or split valve codes. Coil-over and non coil-over compatible.

    The choice is clear, let the new AFCO Steel Mono-Tube Gas Shocks handle your car all the way to victory lane!

    Choose:

    • Length -  7 or 9"
    • Left side shock - 0=N, 1=Y
    • Compression Valving - 0-13
    • Rebound Valving - 0-13
  • Speedthane 223559 Blue Bump Stop, 3 Inch Height, Hard
    Speedthane 223559 Blue Bump Stop, 3 Inch Height, Hard
    (Part #106223559)
    x
                
    • Micro-Cellular Polyurethane material (MCU)
    • Consistently outperforms any other material currently available
    • Lasts 3-4 times longer than rubber in durability testing
    • Fine tune chassis movement and handling
    • Superior resistance to oils, grease, brake fluid, fuels
  • CSI RS-X2 Gas Double Adjustable Shock, Eye Adjustable
    CSI RS-X2 Gas Double Adjustable Shock, Eye Adjustable
    (Part #9401370)
    x
                The all new RS-X2 double adjustable shock is light weight, compact and  effective.  It boast a wide tuning range and low minimum gas  pressure.  Both the rebound and compression adjusters  can be ran in the cock pit for the ultimate in tune ability.
    • CSI engineered this shock that has all of the features necessary to win at an affordable price
    • The all new RS-X2 double adjustable shock is light weight, compact and effective
    • It boasts a wide tuning range and low minimum gas pressure
    • Improved response over other shocks by eliminating the canister
    • Both the rebound and compression adjusters can be ran in the cock pit for the ultimate in tune ability
    • Other features include a billet optimum flow piston, low drag seals, tuned basevalve assembly, and CSI machined steel Gold coated shaft
    • Body: Threaded Aluminum 
    • Eyelet: Aluminum with premium spherical bearings
    • Choose from 5", 6", 7", or 8" stroke
  • Eagle Motorsports Sprint Car Adjustable Aero Shock Tower Pair
    Eagle Motorsports Sprint Car Adjustable Aero Shock Tower Pair
    (Part #9403761)
    x
                
    Eagle Motorsports factory-built component. 
    • Hand fabricated
    • Threaded spuds with aluminum spacers
    • Integrated wing strap spud
    • Sold in pairs
  • CSI RS12-10PACK-001 Sprint Car Tuner 10 Shock Pack, Winged Sprints
    CSI RS12-10PACK-001 Sprint Car Tuner 10 Shock Pack, Winged Sprints
    (Part #9406000)
    x
                  

    CSI has done all the homework for you. They incorporate the most current valving combinations and packaged them together at a special price. Included in the package are shocks for average, slick and rough track conditions. The RS-12 Twin Tube non-adjustable shocks come standard in this package.

    This package is built specifically for winged sprint cars and includes ten (10) specifically valved shocks.

    Included in this kit:

    (1) 7" 4-6 (1) 7" 4 LF shocks

    (1) 7" 5 (1) 7" 5-3 RF shocks

    (1) 8" 3-8 (1) 8" 3-9 (1) 8" 4-8 LR shocks

    (1) 9" 5 RT (1) 9" 5 (1) 9" 4.5-6 RR shocks

  • CSI Adjustable Midget Shocks, 4 Pack
    CSI Adjustable Midget Shocks, 4 Pack
    (Part #9406007)
    x
                

    CSI has done all the homework for you. They incorporate the most current valving combinations and packaged them together at a special price. Included in the package are midget shocks for average, slick and rough track conditions. The RS-12 Twin Tube adjustable shocks come standard in this package. 

    • 4 eye adjustable RS-12 twin tube shocks
    • Most current valving combinations
    • Included are shocks for average, slick and rough track conditions
    • threaded aluminum bodies

    This package is built specifically for midget racing and includes four (4) specifically valved shocks.

    Contact Speedway's Suspension Service Center to customize your own set. 

Goto Previous PagePrevious Page
1 2 3 4 5 ... 50