Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Oval Track Manual Transmission At Speedway Motors

Shift into high gear with manual transmission parts from Speedway Motors. Featuring products from the top brands like Bert, Brinn, AFCO, and Falcon Transmission, you can count on Speedway Motors having the parts you need, when you need them. And with a 98% in-stock rate and same day shipping, you can bet you'll get it fast!

"Oval Track, Pony Stock" Page 1 of 1

All

New

Garage Sale

  • 2.3 Ford Release Bearing
    $29.99
    2.3 Ford Release Bearing
    SKU-8901519
    x
                

    Clutch release (throwout) bearing for your 2.3 Ford race motor.

  • Ram Clutches 498 Manual Release Bearing for GM Transmission, Dual Disc
    Ram Clutches 498 Manual Release Bearing for GM Transmission, Dual Disc
    SKU-605498
    x
                

    High performance manual clutch release bearing for most GM 3-speed and 4-speed manual transmissions. When you switch from a stock clutch to a racing clutch, you may need a longer release bearing like this one. These are 2-1/2" in overall length,  have a 1.370" I.D. for GM-based transmissions, and have a rounded bearing face.

    • Withstands high-spring pressure and high RPM operation
    • Heat-treated and blanchard-ground to ensure trueness
    • Ball bearing race packed with heat-resistant moly-based grease
    • Nylon liner and bearing retainer for cool, quiet operation
    • Bearing Face:  Rounded
    • Overall Thickness (Length):  2.500"
    • Face Width:  2.725"
    • I.D.:  1.37"
  • Ram Clutches 498F Ford T-5 Manual Release Bearing
    Ram Clutches 498F Ford T-5 Manual Release Bearing
    SKU-605498F
    x
                

    When you switch from a stock clutch to a racing clutch, you may need a longer release bearing. These are 2-1/4" in overall length and have a 1.433" I.D. for Ford T5 5-speed manual transmissions (will not fit GM T-5).

    • Bearing Face:  Rounded
    • Overall Thickness (Length):  2.25"
    • I.D.:  1.433"

     

  • Ram Clutches 498P 2.3 Ford Round Face Release Bearing
    Ram Clutches 498P 2.3 Ford Round Face Release Bearing
    SKU-605498P
    x
                On aluminum racing clutches you need to run a round face release bearing. This bearing is 2.25” in overall length and fits the stock 23 spline transmissions.
            
  • Ram Clutches 8730 7.25 Inch Single Disc Clutch
    Ram Clutches 8730 7.25 Inch Single Disc Clutch
    SKU-6058730
    x
                

    This Ram Single Disc clutch is lightweight and perfect for improving lap times. Aluminum pressure plate with a 7.25” diameter 1”-23 spline disc. At 9.7 pounds overall (including the button) the Ram 7.25 single is a full pound lighter than the competition. Fits 2000/2300 Pinto/Mustang engines.

    Requires Ram Flexplate 605-8530 at right.

  • Ram Clutches 28518 Ram Coupler Cone, 1 Inch 23-Spline Ford
    Ram Clutches 28518 Ram Coupler Cone, 1 Inch 23-Spline Ford
    SKU-60528518
    x
                

    Ram coupler 1" 23-spline replacement cone for Ford.

    Ram Coupler Illustration (GIF) 

  • 5-1/2 Inch 2-Disc Racing Clutch for 2300-2000 Pinto
    5-1/2 Inch 2-Disc Racing Clutch for 2300-2000 Pinto
    SKU-91023300
    x
                

    This is the killer clutch set-up for the 2.3/2.0 L based Ford Pinto engine. It is a 5-1/2" two disc that only weighs 8.12 lbs. for lower moment of inertia resulting in quicker acceleration and deceleration. It MUST be used with crankshafts that have been re-tapped for 7/16" bolts. Fits 1"-23 spline input. 

    This is a 2-disc racing clutch that works like a single disc clutch but with more clamping force, you will need a aftermarket throw out bearing with a round face. You will not need a flywheel, you will need a flex plate. This is the killer clutch set-up for the 2.3/2.0 L based Ford Pinto engine. It is a 5-1/2" two disc that only weighs 8.12 lbs. for lower moment of inertia resulting in quicker acceleration and deceleration. It MUST be used with crankshafts that have been re-tapped for 7/16" bolts. Fits 1"-23 spline input. 

    • Cover manufactured from 7075T6 forgings
    • Floater plates manufactured from 4130 forgings
    • Super high density friction material
    • The main plate of this multi disc clutch has both the 2.3 and the 2.0 Series crank bolt pattern.
    • Use ARP flexplate/flywheel bolts.
  • 2.3 Ford 7-3/4 Inch Racing Pressure Plate
    2.3 Ford 7-3/4 Inch Racing Pressure Plate
    SKU-890C1122P
    x
                

    This stock appearing 7-3/4" pressure plate is the lightest on the market for the 2300 Ford engine. Less rotating weight means faster acceleration off the corners. 1"-23 spline.

  • Ram Clutches 41122 2.3 Ford 7-7/8 Inch Racing Clutch Pressure Plate
    Ram Clutches 41122 2.3 Ford 7-7/8 Inch Racing Clutch Pressure Plate
    SKU-60541122
    x
                

    Ram designed their 7-7/8" Clutch specifically for the rigors of racing - its not just a reworked stock clutch. Weighs 8.5 pounds

    Pressure plate only, disc and flywheel are sold seperate. 

  • ARP Fasteners 151-2801 Flywheel Bolts - 2.3 Ford
    ARP Fasteners 151-2801 Flywheel Bolts - 2.3 Ford
    SKU-1011512801
    x
                Flexplate  bolts play an important role in the performance and safety of race cars and  street machines alike. That’s why the fastener experts at ARP develop special  bolts that are far superior to OEM hardware. Forged from aerospace alloy and  heat-treated prior to thread rolling and machining.
            
  • Ram Clutches 28513 Ram Coupler Top Plate
    Ram Clutches 28513 Ram Coupler Top Plate
    SKU-60528513
    x
                

    Ram coupler replacement top plate.

    Ram Coupler Illustration (GIF)

  • ARP Fasteners 200-2802 Chevy Flywheel Bolts
    ARP Fasteners 200-2802 Chevy Flywheel Bolts
    SKU-1012002802
    x
                

    Flywheel bolts play an important role in the performance and safety of race cars and street machines alike. That’s why the fastener experts at ARP develop special bolts that are far superior to OEM hardware. Forged from aerospace alloy and heat-treated prior to thread rolling and machining.

    Fits Chevrolet 90° V6 & 265-454 Chevy V8 with 2-pc rear seal. Set of 6 bolts.

    • Exclusive, flat, 12-point head design
    • Larger than stock shank diameter for increased strength and improved flywheel register
    • Originally developed for NASCAR Winston Cup competition
    • Has a 200,000 psi rating
  • Ram Clutches 1017 2.3 Ford 7-7/8 Inch Metallic Racing Clutch Disc
    Ram Clutches 1017 2.3 Ford 7-7/8 Inch Metallic Racing Clutch Disc
    SKU-6051017
    x
                

    Ram designed their 7-7/8" Clutch specifically for the rigors of racing - its not just a reworked stock clutch.

    These discs have a 1”-23 spline and a solid hub

    Disc only, pressure plate and flywheel are sold seperate.