Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Oval Track Engines At Speedway Motors

Speedway Motors is the circle track engine authority! Whether you have a Ford or Chevy race motor, Speedway has the engine parts you need at the best prices around. Our large assortment of iron cylinder heads, performance camshafts and racing valve train components allows you to tailor your engine to any racing condition. Speedway also has a variety of durable claimer engine kits, oil pumps and oil pans to help keep costs down without sacrificing performance or reliability.

"Oval Track, Pony Stock" Page 1 of 2

All

New

Garage Sale

  • Mahle Ford 2.3 Powerpak Pistons, Flat Top, 5.7 Rod
    Mahle Ford 2.3 Powerpak Pistons, Flat Top, 5.7 Rod
    SKU-50309801
    x
                

    The Mahle PowerPak pistons are a race proven lightweight forged design that are complete with rings, wrist pins and locks. They are also completely phosphate coated plus feature an anti-friction Grafel skirt coating.

    Ford Ford 2300cc (3.78" bore x 3.126" stroke). A 1.5mm, 1.5mm, 3.0mm file fit performance ring set is included. Uses .927" wrist pins.

    • Forged piston for performance applications
    • Fully-machined crown
    • Grafal anti-Friction coating on skirts
    • Phosphate-coated to reduce micro-welding and pin galling
    • Pin bores binished on CNC boring equipment
    • Deburred
    • High strength, light weight steel pins
    • Race proven round wire locks
    • Low drag ring pak
    • Lightweight slipper kirt forgings
  • 1974-93 Ford 2.3L Steel Shim Head Gasket
    1974-93 Ford 2.3L Steel Shim Head Gasket
    SKU-91012077
    x
                

    Corteco 20534CS steel shim style head gasket to raise compression. Compressed thickness is .051”. Works with bores up to 3.840”.

    For 1974-1993 2.3L applications.

  • 1974-90 Ford 2.3L Intake Gaskets
    1974-90 Ford 2.3L Intake Gaskets
    SKU-91012079
    x
                

    Intake gasket set for 1974-1990 Ford 2.3L applications.

  • OTR Racing RS48101-2 Short Oil Filter with Internal Magnet, Chevy
    OTR Racing RS48101-2 Short Oil Filter with Internal Magnet, Chevy
    SKU-91015171
    x
                OTR Filters very own oil filters are the finest  spin on oil filters made in the motorsports world. Race engines are  expensive, protect your investment.

    OTR oil filters have:
    • An internal magnet designed to attract fine steel particles too small to be trapped by the filter media!
    • Non stick gaskets made from a proprietary synthetic rubber compound.
    • Burst strength of 600 P.S.I.! OTR's spin on racing oil filters exceeds the ARP 1400 Standard by 5090, and they are made to handle the harshest conditions.
    • Ability to trap particles down to 30 micron or less!
    • Heaviest case and base plate in motorsports!
    • Met TCM bypass specification of 12-14 P.S.I., which reduces the risk of premature bypass that can result in unfiltered oil flowing to your engine.   
    • 1" nut welded on the bottom of the filter with 4 safety wire tabs allowing for secure attachment every 90 degrees. Nut is welded on so securely that the canister will distort before weld breaks. Base must break/tear before the nut will come off..
  • 2.3 Ford Round Tooth Timing Set
    2.3 Ford Round Tooth Timing Set
    SKU-91014220
    x
                

    If you are making serious power out of your 2.3 Ford engine, it will only be a matter of time before you strip the square teeth off a timing belt.

    This round-tooth timing kit includes a lightweight aluminum adjustable upper sprocket, lower sprocket, auxillary shaft sprocket and round-tooth belt.

  • Total Seal 2.3 Ford Gapless 2nd Piston Rings, Style C
    Total Seal 2.3 Ford Gapless 2nd Piston Rings, Style C
    SKU-7182300
    x
                

    Total Seal ductile iron top ring, gapless 2nd ring and 3-piece low tension oil rings for 2.3 liter Pinto race motor. 

    These are sold .005" oversize and must be file fit. Style C ring (1/16", 1/16", 3/16").

    Ring Style Chart (GIF)

  • Icon 2.3 Ford Pistons, Flat Top, 5.205 Rod
    $299.99
    $379.99
    Icon 2.3 Ford Pistons, Flat Top, 5.205 Rod
    SKU-474939
    x
                

    If you are running the 2.3 Ford, these Icon forged pistons are just the ticket! Super lightweight and forged from 2618 alloy, they are the most bang for the buck you'll find.

    Available in .030" and .040" oversizes (stock 3.78" bore x 3.126" stroke). Use ring Style C.

    • High ductility 2618 alloy
    • Dual forced pin oiling on most applications
    • Lateral gas porting on higher compression ratios
    • Fully machined with deep valve pockets
    • Second land accumulator grooves      
    • Top land mini groove technology
    • Diamond finished skirts
    • Triple wound spiral locks
    • Spacer rings included in short compression heights that intersect the wrist pin bore

    Ring Style Chart (GIF)

  • Retainers for 2.3L Ford Drop-In Dual Valve Springs
    Retainers for 2.3L Ford Drop-In Dual Valve Springs
    SKU-91542932
    x
                
    Valve spring retainers for drop-in dual valve springs 915-19817.

    Sold in sets of 8.
  • Canton Racing 11-920 2.3 Ford Engine Oval Track Front Sump Oil Pan
    Canton Racing 11-920 2.3 Ford Engine Oval Track Front Sump Oil Pan
    SKU-91011920
    x
                

    It doesn't matter whether you have a bone stock engine or a 500 HP killer. If the oil system isn't up to task, it's trashed! Don't put a cheap oil pan on any engine! These Canton Racing oil pans feature anti-slosh baffling, trap doors, crank scraper, and a magnetic drain plug. 

    This Ford left turn front sump is for ‘74-97 2300cc ohc engines in front sump Pinto chassis and mini-modifieds. It has a 7-1/2" Deep, 12" Wide, 9-1/2" Long sump that holds 5-1/2 quarts and has a 6 quart system capacity. This pan works with our 2300 main support when using a 86C pump and pan's crank scraper is modified for clearance.

    • 7-1/2" Deep
    • 12" Wide


  • 2.3L Ford Billet Timing Belt Tensioner
    2.3L Ford Billet Timing Belt Tensioner
    SKU-91015210
    x
                

    Designed for all out racing conditions, these 2.3L Ford timing belt tensioners feature a machined stainless steel back plate, billet aluminum pulley and 13k RPM double roller bearings. The spring pin is an exclusive shoulder pin design, not a cheap spring pin like the competition. Eliminates costly and severe valvetrain damage caused by stock 2-piece stamped wheel.

  • 2.3 Ford Adjustable Crankshaft Sprocket
    2.3 Ford Adjustable Crankshaft Sprocket
    SKU-91014212
    x
                

    Hard anodized billet aluminum construction for strength and light weight.

    910-14212 Instructions (PDF)

  • Clevite Engine Parts SH1095S 77 Ford 2.3 Auxillary Shaft Bearings
    Clevite Engine Parts SH1095S 77 Ford 2.3 Auxillary Shaft Bearings
    SKU-757SH1095S
    x
                Auxillary shaft bearings for Ford 2.3L engines. Available in standard size only.
            
  • Canton Racing 11-910 2.3 Ford Engine Rear Sump Oil Pan, Oval Track
    Canton Racing 11-910 2.3 Ford Engine Rear Sump Oil Pan, Oval Track
    SKU-91011910
    x
                

    It doesn't matter whether you have a bone stock engine or a 500 HP killer. If the oil system isn't up to task, it's trashed! Don't put a cheap oil pan on any engine! These Canton Racing oil pans feature anti-slosh baffling, trap doors, crank scraper, and a magnetic drain plug. 

    This Ford left turn rear sump is for ‘74-97 2300cc ohc engines in Fox bodies, rear sump Pinto chassis, and mini-modifieds. It has a 7" deep, 11" wide, 8-1/2" long sump that holds 5 quarts and has a 5-1/2 quart system capacity. Pans will work with a stock starter. This pan works with our 2300 main support when using a 86C pump and pan's crank scraper is modified for clearance.

    • 7" Deep
    • 11" Wide


  • KB 2.3 Ford Hypereutectic Pistons, Flat Top, 5.205 Rod
    KB 2.3 Ford Hypereutectic Pistons, Flat Top, 5.205 Rod
    SKU-474217
    x
                

    Keith Black hypereutectic pistons are T-6 heat treated and offer reduced scuffing and improved durability. They also allow you to run tighter clearances which makes more power. 

    Available in .030" and .040" oversizes (stock 3.78" bore x 3.126" stroke). Use ring Style C. Pins included.

    Ring Style Chart (GIF)

  • Cloyes Gear B014 1974-91 2.3L Ford Timing Belt
    Cloyes Gear B014 1974-91 2.3L Ford Timing Belt
    SKU-91015200
    x
                

    Meets or exceeds OEM performance requirements. Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience.Timing belts made of wear resistant fabric, resisting oil and engine heat. High tensile strength cord construction minimizes stretch.

    • Pitch:  3/8"
    • Teeth:  129
    • Width:  0.878"
  • 1974-81 Ford 2.3L 2-Piece Rear Main Seal
    1974-81 Ford 2.3L 2-Piece Rear Main Seal
    SKU-91012074
    x
                

    Two-piece rear main seal for 1974-1981 Ford 2.3L applications.

  • KB 2.3 Ford Hypereutectic Pistons, Flat Top, 5.700 Rod
    KB 2.3 Ford Hypereutectic Pistons, Flat Top, 5.700 Rod
    SKU-474218
    x
                

    Keith Black hypereutectic pistons are T-6 heat treated and offer reduced scuffing and improved durability. They also allow you to run tighter clearances which makes more power. 

    Available in .030" and .040" oversizes (stock 3.78" bore x 3.126" stroke). Use ring Style C. Pins included.

    Ring Style Chart (GIF)

  • Crower SP93237B-4 2.3 Ford Sportsman I-Beam Rods, Chevy 6 Bearing
    Crower SP93237B-4 2.3 Ford Sportsman I-Beam Rods, Chevy 6 Bearing
    SKU-29091237
    x
                These 5.7 inch rods are much stronger than stock 2.3 rods. Made of 4340 chromoly steel and include 180,000 psi rod bolts. Set of four.
            
  • Manley 11793-4 2.3 Ford Exhaust Valve - 1.59 Inch
    Manley 11793-4 2.3 Ford Exhaust Valve - 1.59 Inch
    SKU-50511793
    x
                

    These Manley Performance "Esslinger" Race Master exhaust valves for Ford 2300 feature XH-426 stainless material, chrome stems, hardened tips, and a swirl polished finish. Valves are fully machined.

    Note:  This aftermarket valve does not make use of the o/e Ford 3-groove keeper.  It is designed to use the 7 degree 1-groove keeper such as our part # 915-99097

  • 2.3L Ford Drop-In Dual Valve Springs
    2.3L Ford Drop-In Dual Valve Springs
    SKU-91519817
    x
                
    Complete set of "drop in" dual valve springs for your all-out Ford 2.3 race engine. These springs are designed to be direct drop in springs, with no additional machining of the spring pocket required. Dual springs help to prevent valve bounce much more effectively than the stock single spring style so they can be used in Ford 2300 engines revving up to 9000 RPM.

    Springs are sold in sets of 8 only.
  • OTR Racing Short Oil Filter, Ford
    $14.99
    $19.99
    OTR Racing Short Oil Filter, Ford
    SKU-91015173
    x
                OTR Filters very own oil filters are the finest  spin on oil filters made in the motorsports world. Race engines are  expensive, protect your investment.

    Our oil filters have:
    • An internal magnet designed to attract fine steel particles too small to be trapped by the filter media!
    • Non stick gaskets made from a proprietary synthetic rubber compound.
    • Burst strength of 600 P.S.I.! Our spin on racing oil filters exceeds the ARP 1400 Standard by 5090, and they are made to handle the harshest conditions.
    • Ability to trap particles down to 30 micron or less!
    • Heaviest case and base plate in motorsports!
    • Met TCM bypass specification of 12-14 P.S.I., which reduces the risk of premature bypass that can result in  unfiltered oil flowing to your engine.
    Note:  1" nut welded on the bottom of the filter with 4 safety wire tabs allowing for secure attachment every 90 degrees. Nut is welded on so securely that the canister will distort before weld breaks. Base must break/tear before the nut will come off.
  • Clevite 77 Ford 2.3 Main Bearings
    Clevite 77 Ford 2.3 Main Bearings
    SKU-757MS1117P
    x
                

    Main bearings for Ford 2.3L engines. These bearings fit 2.3 engines that have one spark plug per cylinder.

    Available in standard, .25mm and .50mm sizes.

  • Speedway 2.3 Ford Hydraulic Cam, 4000-7200 RPM
    Speedway 2.3 Ford Hydraulic Cam, 4000-7200 RPM
    SKU-9153194
    x
                

    Speedway 2.3 Ford hydraulic camshafts are specifically designed for oval track racing. Camshafts must be used with oil additive (sold separately).

    • Basic RPM Range: 4000-7200
    • Duration @ .050: 252
    • Lobe Angle: 105
    • Gross Lift: .450" 
    • Lifters NOT included

    Cam Application Chart (GIF)

    Cam Card

  • Canton Racing 11-900 2.3 Ford Engine Saver Rear Sump Oil Pan, Stock
    Canton Racing 11-900 2.3 Ford Engine Saver Rear Sump Oil Pan, Stock
    SKU-91011900
    x
                

    It doesn't matter whether you have a bone stock engine or a 500 HP killer. If the oil system isn't up to task, it's trashed! Don't put a cheap oil pan on any engine! These Canton Racing oil pans feature anti-slosh baffling, trap doors, crank scraper, and a magnetic drain plug. 

    This Circle Track stock appearing rear sump is for ‘74-`97 2300cc OHC Ford engines. It is stock depth with a 5 quart system capacity. Stock dimensions are capacity are retained, but Canton's specially designed baffling system ensures increased oil control.  Magnetic drain plug.

    • 7" Deep
    • 7-3/4" Wide


  • COMP Cams CL70-127-6 2.3 Ford Hydraulic Cam & Lifter Kit 1500-5500 RPM
    COMP Cams CL70-127-6 2.3 Ford Hydraulic Cam & Lifter Kit 1500-5500 RPM
    SKU-28271275
    x
                

    Use new followers and dual springs with these Magnum series camshaft & lifter kits from COMP Cams. Good all around street performance. Can be used daily, mid-range power.

    • 272 advertised duration
    • 226 duration @ 0.050" lift
    • 0.440" valve lift
    • 110 lobe angle
    • 1500-5500 RPM

    Cam Chart (PDF)

  • Speedway 2.3 Ford Super Stock Rods
    Speedway 2.3 Ford Super Stock Rods
    SKU-91015340
    x
                Reconditioned stock rods with 170,000 psi rod bolts. Resized, magnafluxed and clearanced. Sold in matched sets of four.
            
  • High Volume 2.3 Ford Oil Pump
    High Volume 2.3 Ford Oil Pump
    SKU-91015201
    x
                This high volume oil pump fits 1974-85 Ford 2.3L (non-turbo) engines. Pump produces standard pressure with approximately 25% more volume than stock replacement pumps.
            
  • 2.3 Ford Forged Cam Followers
    $149.99
    2.3 Ford Forged Cam Followers
    SKU-91519818
    x
                

    These steel Forged Ford 2.3 cam followers feature wear pads and stabilizer grooves for the mouse trap springs.  They come ready to install with assembly lube. Sold in sets of 8.

    • Wear pads
    • Stabilizer grooves for mouse trap springs
    • Kit complete with assembly lube
    • Sold in sets of 8
  • COMP Cams 846-8 2.3 Ford High Energy Hydraulic Lifters
    COMP Cams 846-8 2.3 Ford High Energy Hydraulic Lifters
    SKU-2828468
    x
                

    High Energy Hydraulic lifters have a patented constant orifice metering valve that precisely meters oil to the rocker arms. Continuous contact between the metering valve and pushrod seat is maintained, eliminating excessive oiling at high engine speeds. The pushrod seat is made of a special powdered metal iron alloy that is heat-treated for strength and wear resistance.

    In addition, High Energy Lifters have a lightweight check valve disc that allows for quicker response, which results in increased engine speed before valve float. This check valve disc also maintains added control at all engine speeds and loads.

    Comp Cams High Energy Hydraulic Lifters also contain a longer piston than conventional hydraulic lifters, which provides more load bearing surface and increases lifter longevity.

  • Icon 2.3 Ford Pistons, Flat Top, 5.700 Rod
    $299.99
    $379.99
    Icon 2.3 Ford Pistons, Flat Top, 5.700 Rod
    SKU-474946
    x
                

    If you are running the 2.3 Ford, these Icon forged pistons are just the ticket! Super lightweight and forged from 2618 alloy, they are the most bang for the buck you'll find.

    • High ductility 2618 alloy
    • Dual forced pin oiling on most applications
    • Lateral gas porting on higher compression ratios
    • Fully machined with deep valve pockets
    • Second land accumulator grooves      
    • Top land mini groove technology
    • Diamond finished skirts
    • Triple wound spiral locks
    • Spacer rings included in short compression heights that intersect the wrist pin bore

    Available in .030" and .040" oversizes (stock 3.78" bore x 3.126" stroke). Use ring Style C.

    Ring Style Chart (GIF)

  • 1974-88 Ford 2.3L Valve Cover Gasket
    1974-88 Ford 2.3L Valve Cover Gasket
    SKU-91012073
    x
                

    Racing valve cover gasket for 1974-1988 Ford 2.3L applications.

  • Total Seal Conventional Rings for 2.3 Ford Mahle Pistons
    Total Seal Conventional Rings for 2.3 Ford Mahle Pistons
    SKU-718CR2194
    x
                

    Mahle 2.3 Ford pistons use rings which are 1.5 mm x 1.5 mm x 3 mm (we call these Style E rings). Choose .030" or .040" oversize.

    • Ductile iron plasma moly top rings, conventional 2nd rings, & 3 piece standard tension oil rings
    • For use in all applications including mild nitrous or mild boost
  • Total Seal Gapless Rings for 2.3 Ford Mahle Pistons
    Total Seal Gapless Rings for 2.3 Ford Mahle Pistons
    SKU-718T2194
    x
                

    Mahle 2.3 Ford pistons use rings which are 1.5 mm x 1.5 mm x 3 mm (we call these Style E rings). Choose .030" or .040" oversize.

    • TS1 gapless second set
    • Ductile iron top ring, gapless 2nd ring & 3 piece standard tension oil ring
    • TS1 sets are for use in all applications including mild nitrous or mild boost
  • Canton Racing Products 11-911 Pick-Up for 2.3 Ford Rear Sump Oil Pans
    Canton Racing Products 11-911 Pick-Up for 2.3 Ford Rear Sump Oil Pans
    SKU-91011911
    x
                

    Pick-up for 2.3 Ford rear sump oil pans (910-11900 and 910-11910).

    • Press fit installation
    • 0.750 tube diameter


  • Clevite 77 Ford 2.3 Rod Bearings for 5.7 Inch Chevy Rods
    Clevite 77 Ford 2.3 Rod Bearings for 5.7 Inch Chevy Rods
    SKU-757CB745P
    x
                Connecting rod bearings for Chevy 5.7" 6 cylinder rods used in Ford 2.3L engines. Available in standard, .001", .010", .020", and .030" sizes.
            
  • Speedway 2.3 Ford Solid Lifter Cam, 3800-7200 RPM
    Speedway 2.3 Ford Solid Lifter Cam, 3800-7200 RPM
    SKU-9153192
    x
                

    Speedway 2.3 Ford solid lifter camshafts are specifically designed for oval track racing. Camshafts must be used with oil additive (sold separately).

    • Basic RPM Range: 3800-7200
    • Duration @ .050: 236
    • Lobe Angle: 105
    • Gross Lift: .430"
    • Lifters NOT included

    915-3192 Instructions (PDF)

Goto Previous PagePrevious Page
1 2