Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Oval Track Engines At Speedway Motors

Speedway Motors is the circle track engine authority! Whether you have a Ford or Chevy race motor, Speedway has the engine parts you need at the best prices around. Our large assortment of iron cylinder heads, performance camshafts and racing valve train components allows you to tailor your engine to any racing condition. Speedway also has a variety of durable claimer engine kits, oil pumps and oil pans to help keep costs down without sacrificing performance or reliability.

"Oval Track, Oiling System" Page 1 of 5

  • Magnetic Drain Plug
    $3.99
    Product Rating: 5.00 Stars
    Magnetic Drain Plug
    x
                

    Metal debris can wreak havoc on an engine. Install this plug in your oil pan to catch any metal filings before they get sucked into the oil pump and cause real damage!

    Will fit any oil pan with 1/2-20 threads.

  • Small Block Chevy Claimer Oil Pan w/ Plug Combo, Hi-Vol. Pump, LH Dipstick
    Small Block Chevy Claimer Oil Pan w/ Plug Combo, Hi-Vol. Pump, LH Dipstick
    x
                

    Save money with our Claimer Pan Combos! For Small Block Chevy 1955-79 (driver side dipstick). Meets 2011 IMCA rules. Will not fit rear steer cars unless the engine has been moved back. Works with stock or mini starters.

    Kits include:

    • Claimer Oil Pan with 1" inspection plug (6 quart, 7-1/4" deep)
    • Oil Pump Pickup, 5/8" diameter 
    • High Volume Pump (55-65 psi preset)
  • ARP Fasteners 230-7001 Small Block Chevy Oil Pump Studs
    ARP Fasteners 230-7001 Small Block Chevy Oil Pump Studs
    x
                For S/B Chevy only. Heat treated Chromoly steel. Comes with grade 8 nut and heat treated washer.
            
  • Small Block Chevy High-Volume Oil Pump, 5/8 Pickup
    Small Block Chevy High-Volume Oil Pump, 5/8 Pickup
    x
                

    Thse high-volume oil pumps move 25% more volume than stock volume oil pumps. Pumps are preset to 55-65 psi. Fits Small Block Chevy.

  • Small Block Chevy Main Cap Baffle
    Small Block Chevy Main Cap Baffle
    x
                Keeps sump oil from reaching crankshaft. Mounts between pump and main cap. Requires trimming. 
            
  • Small Block Chevy Oil Pan Stud Kit
    Small Block Chevy Oil Pan Stud Kit
    x
                The black finish grade 5 bolts have a Bullet tip to make installation easy. The zinc plated self-locking nuts give uniform clamping for a positive seal.
            
  • Small Block Chevy Windage Tray, Plain Steel
    Small Block Chevy Windage Tray, Plain Steel
    x
                

    Screen style oil windage tray for S/B Chevy engines using a stock style pan with rear sump. Ready to install. Fits 2 or 4 bolt main blocks.

  • Braided Pressure Gauge Line Kit
    Braided Pressure Gauge Line Kit
    x
                This braided pressure gauge line kit makes it a snap to hook up your pressure gauge.  Can be used with oil, water, fuel or air. Includes AN 4 braided line,  AN4 to 1/8" NPT male and AN4 to 1/8" NPT female. Choose from lengths of  25", 36" or 48".
            
  • Steel Tank Mounting Brackets for Spun Aluminum Fuel Tanks
    Steel Tank Mounting Brackets for Spun Aluminum Fuel Tanks
    x
                

    These powder coated steel band clamps feature two tabs for attachment (per clamp) to a flat surface. Use them with 8" diameter tanks. These tank mounting straps work best with our spun aluminum gas tanks, (91076401 and 91076402).

    • Powder coated
    • Steel
    • Two tabs for attachment (per clamp)
    • Use with 8" diameter tanks
  • Moroso 37800 Chevy Block Deck Plug Kit
    Moroso 37800 Chevy Block Deck Plug Kit
    x
                

    Reduce upper cylinder wall distortion by installing 3/4" NPT plugs in deck water passage holes of S/B Chevy V8 and 90° V6 Chevys. Machining necessary after installation. Makes water passage holes 5/16".

    • Reduces upper cylinder wall distortion
    • Water holes must be tapped before the plugs are screwed in
    • Block must also be decked after installation
    • Plugs also restrict water flow to the cylinder heads by reducing size of water passage holes to 5/16"
  • Neoprene Hose and Fitting Kit for Remote Oil Filter, 48 Inch
    Neoprene Hose and Fitting Kit for Remote Oil Filter, 48 Inch
    x
                

    Kit includes enough -8 AN push-on neoprene/rubber hose (1/2" I.D.) to run two 48" lines from your oil filter block adapter to your remote oil filter bracket. Also includes two 1/2" NPT hose ends, two -8 AN hose ends and two 1/2" NPT to -8 AN steel fittings.

  • Peterson Fluid Systems 08-0009 Stock Car Dry Sump Oil Tank, 3 Gallon
    Peterson Fluid Systems 08-0009 Stock Car Dry Sump Oil Tank, 3 Gallon
    x
                

    Lightweight "new generation" dry sump tank has internal baffling that provides excellent de-aeration while maintaining a tall column of oil over the pick-up. Easy disassembly for cleaning.

    • 16" tall
    • 9" diameter
    • Single return inlet
    • Female -12 AN bungs
  • Ford 302 & 351W Oil Restrictors
    Ford 302 & 351W Oil Restrictors
    x
                Use with solid lifters only.  302/351W. 

    Also availabe for 351C (fits 429-460 Ford also).

    915-50120 Instructions (pdf)

  • Small Block Chevy Mandrel Drive Kit
    Small Block Chevy Mandrel Drive Kit
    x
                

    Includes aluminum 3.250" mandrel drive, spacer, end cap, 6" bolt and key stock. S/B Chevy. 5 pieces. Hold from one pulley up to 3 pulleys.

     

  • Small Block Chevy Dipstick, 1955-1979
    Small Block Chevy Dipstick, 1955-1979
    x
                Stock type oil dipstick replacement for Small Block Chevy. Works with 1955-1979 blocks where the dipstick is on the driver's side.
            
  • Weld or Bolt-On Fill Cap
    $14.99
    Product Rating: 4.71 Stars
    Weld or Bolt-On Fill Cap
    x
                

    Billet aluminum cap and base. Weld or screw to your valve cover, oil tank or rear end. Knurled cap with O-ring seal.

    • 1-1/4" inside diameter
    • 1-1/4"-12 thread pitch
  • Small Block Chevy Oil Pump Shaft
    Small Block Chevy Oil Pump Shaft
    x
                Use these oil pump shafts to upgrade the weak link in any wet sump system. With steel sleeve. Works with stock or high volume pumps.
            
  • Chevy V8 Oil Restrictor Kit
    $7.99
    Chevy V8 Oil Restrictor Kit
    x
                

    Available for either roller or solid lifter cams. Reduces oil flow to upper end of engine (lifters, pushrods, rockers, springs). As a result, it increases percentage of oil directed to bearings. Restrictors screw into the two lifter lube holes in the back of the engine, replacing the two stock pipe plugs.

    Designed for use with solid flat tappet or roller lifter cams. Fits both S/B and B/B Chevy.

    Note: NOT for use with hydraulic lifters.

  • Speedway Aluminum Tank, 2 Gallon
    Speedway Aluminum Tank, 2 Gallon
    x
                These brushed aluminum tanks are the perfect finishing touch for your pride and joy. Each has a knurled non-vented cap, two 3/8" NPT female fittings on the top and one 3/4" NPT female fitting on the bottom. Mounting brackets sold separately.
            
  • Chevy High Pressure Oil Pump Spring
    Chevy High Pressure Oil Pump Spring
    x
                

    Need an increase in oil pressure? Look no farther then these oil pump springs. Provides a 20% increase in pressure.

  • Pickup for High Volume S/B Chevy Oil Pump - 5/8 Inch Tube
    Pickup for High Volume S/B Chevy Oil Pump - 5/8 Inch Tube
    x
                

    Oil pump pickup is designed to work with our claimer pans and a high volume pump with a 5/8" diameter inlet. Includes mounting tab.

  • Ford Racing M-6880-A50 90 Degree Oil Filter Adapter
    Ford Racing M-6880-A50 90 Degree Oil Filter Adapter
    x
                

    There are times you just don't have room for the oil filter on your Ford powered toy. This adapter attaches where the oil filter mounts and turns the filter 90 degrees. Rotate filter toward front of engine to provide clearance for engine swaps and chassis modifications.

    Fits most Ford V8 and some 4 cyl. engines that use Fram PH8A/HP1 or Motorcraft FL-1A oil filters. 

  • Peterson Fluid Systems 09-0404 Dry Sump Pan Screen, -12 AN
    Peterson Fluid Systems 09-0404 Dry Sump Pan Screen, -12 AN
    x
                Screws onto your pan fitting. Internal screen protects dry sump pump from ingesting engine parts. AN12.
            
  • 1955-79 Stock Raw Steel Small Block Chevy Oil Pan
    1955-79 Stock Raw Steel Small Block Chevy Oil Pan
    x
                

    These unplated, stock capacity oil pans are perfect for projects that don't need a chrome or aluminum pan.

    Now also available with inspection plug!

  • Speedway Aluminum Fuel Tank, 3-1/2 Gallon, 8 x 16 Inch
    Speedway Aluminum Fuel Tank, 3-1/2 Gallon, 8 x 16 Inch
    x
                

    These vintage style brushed aluminum gas tanks are the perfect finishing touch for your pride and joy. Each has a knurled non-vented cap, two 3/8" NPT female fittings on the top and one 3/4" NPT female fitting on the bottom. Mounting brackets sold separately.

    • Has a knurled non-vented cap, two 3/8" NPT female fittings on the top and one 3/4" NPT female fitting on the bottom
    • Mounting brackets sold separately
    • Brushed aluminum finish 
    • 3-1/2 gallon, 16" x 8"
  • Hi-Volume Small Block Chevy Claimer Oil Pan Combo, LH Side Dipstick
    Hi-Volume Small Block Chevy Claimer Oil Pan Combo, LH Side Dipstick
    x
                

    Save money with our Claimer Pan Combos! For Small Block Chevy 1955-79 (driver side dipstick). Will not fit rear steer cars unless the engine has been moved back. Works with stock or mini starters.

    Kits include:

    • Claimer Oil Pan (6 quart, 7-1/4" deep)
    • Oil Pump Pickup, 5/8" diameter 
    • Stock Volume Pump or High Volume Pump (both 55-65 psi preset)
  • 1980-1988 Small Block Chevy Dipsticks
    1980-1988 Small Block Chevy Dipsticks
    x
                Beautifully chrome plated. Chrome dipsticks for 1980-1988 Small Block Chevy (SBC).
            
  • Oil Drip Pan for Quick Change Units
    Oil Drip Pan for Quick Change Units
    x
                

    All aluminum construction. Easily pours hot oil with built-in corner spout. Comfortable, ergonomic handle. Max capacity is 6 quarts.

    • All aluminum construction
    • Easty to pour hot oil with built in corner spout
    • Comfortable, ergonomic handle

     

  • Mandrel Bolt, Grade 8, 7/16-20 x 6 Inch
    Mandrel Bolt, Grade 8, 7/16-20 x 6 Inch
    x
                Grade 8 mandrel bolt (7/16"-20 thread) fits small block Chevy V8 and our mandrels.
            
  • Pickup for Stock Small Block Chevy Oil Pump
    Pickup for Stock Small Block Chevy Oil Pump
    x
                

    Oil pump pickups are designed to work with our claimer pans. Includes mounting tab.

    This pick up is designed for a stock 5 quart pan that is 7-1/4" deep

  • Speedway Small Block Chevy Claimer Oil Pan, LH Dipstick
    Speedway Small Block Chevy Claimer Oil Pan, LH Dipstick
    x
                

    These claimer series oil pans are our best selling circle track pans. This low cost, high quality pan designed for the budget racer. Six quart capacity, 7-1/4" deep with two gates for oil flow control. Fits with stock or mini starter. Will not fit rear steer cars unless the engine has been moved back.

    917-15120 Instructions (PDF)

  • Small Block Chevy Stock Volume Oil Pump
    Small Block Chevy Stock Volume Oil Pump
    x
                Stock volume oil pump for S/B Chevy. Pump is preset to 55-65 psi and uses a 5/8" diameter pick-up tube.
            
  • 1986-Up Stock Raw Steel Small Block Chevy Oil Pan
    1986-Up Stock Raw Steel Small Block Chevy Oil Pan
    x
                

    These unplated, stock capacity oil pans are perfect for projects that don't need a chrome or aluminum pan.

    This oil pan is for a 1 piece rear main seal

    Now also available with inspection plug!

  • Speedway Aluminum Tank, 4 Gallon, 8 x 20-1/2 Inch
    Speedway Aluminum Tank, 4 Gallon, 8 x 20-1/2 Inch
    x
                These brushed aluminum tanks are the perfect finishing touch for your pride and joy. Each has a knurled non-vented cap, two 3/8" NPT female fittings on the top and one 3/4" NPT female fitting on the bottom. Mounting brackets sold separately.
            
  • Mandrel Drive End Plate
    $12.99
    Mandrel Drive End Plate
    x
                End cap with a .250" recess to index on mandrel with a 3" O.D.
  • Ford Racing M-6605-B302 High Strength 302 Ford Oil Pump Drive Shaft
    Ford Racing M-6605-B302 High Strength 302 Ford Oil Pump Drive Shaft
    x
                Driveshaft for 302 Ford oil pumps.
            
Goto Previous PagePrevious Page
1 2 3 4 5