Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 8

Products

Manual Trans Components

Shop Oval Track Manual Transmission At Speedway Motors

Shift into high gear with manual transmission parts from Speedway Motors. Featuring products from the top brands like Bert, Brinn, AFCO, and Falcon Transmission, you can count on Speedway Motors having the parts you need, when you need them. And with a 98% in-stock rate and same day shipping, you can bet you'll get it fast!

Featured Products
  • Speedway Chevy/Ford Steel Bellhousing
    Speedway Chevy/Ford Steel Bellhousing
    (Part #91027001)
    x
                These steel bellhousings are WISSOTA approved for Midwest Modifieds and work with both small block Chevy and small block Ford engine bolt patterns.  They allow for use with Muncie/Saginaw style transmissions.
    • SBC and SBF engine bolt patterns
    • Adapts either engine to Muncie/Saginaw pattern transmissions including BERT, Brinn, Falcon, etc.
    • Bottom opening for easy access
    • Does NOT have provision for stock style clutch arm
    • WISSOTA approved for Midwest Modifieds
    • Non SFI rated
    • NOT for street use
    • Must be used with a 153 tooth (Chevy) or 157 tooth (Ford) or smaller flexplate/flywheel
    • Made in the USA
  • Brinn 70041 Complete Rebuild Kit for Racing Transmission
    Brinn 70041 Complete Rebuild Kit for Racing Transmission
    (Part #22070041)
    x
                This rebuild kit for the Brinn Racing Transmissions 70001 and 70010 includes:

    Brinn Part #  Qty: Decription:
    70046 1 Clutch Asm. Wire
    71003 4 O-Rings
    71010 1 Retaining Ring
    71011 1 Oil Seal
    71012 1 Machined Bushing
    71016 1 Clutch Spring
    71017 6 Steel Clutch Disc.
    71018HD 6 Metallic Friction Disc.
    71026 2 Needle Thrust Washer
    71035 1 Clutch Piston O-Ring
    71040 1 Rear Seal & Bushing
    71046 1 O-Ring
    71063 1 O-Ring
    73009 1 Thrust Race, Intermediate Shaft
  • Accel 77-150 Lakewood Chevy Engine to GM Manual Trans Adapter Bellhousing
    Accel 77-150 Lakewood Chevy Engine to GM Manual Trans Adapter Bellhousing
    (Part #55077150)
    x
                

    This product connects Small Block and Big Block Chevy engines to transmissions using the GM standard pattern such as the Muncie, Saginaw, Borg Warner T10 and Tremec TKO transmissions. This bellhousing is designed to fit GM full and midsized vehicles from 1958-1987.

    • Excellent choice for Street Rods, Street Machines, or Trucks (where SFI bellhousing is not necessary)
    • Does not include or accept an engine block plate
    • Steel Construction
    • Hardware Included
    • Sold Individually

    Note:  This bellhousing is not S.F.I. certified which is required by many sanctioning bodies for cars running 11.49 or faster in the quarter mile.

     

  • Falcon Transmission BCA J2416 Tailhousing Bearing
    Falcon Transmission BCA J2416 Tailhousing Bearing
    (Part #80267574)
    x
                

    Replacement parts for Falcon racing transmission.

  • Bert Transmission 32 Front Input Bearing
    Bert Transmission 32 Front Input Bearing
    (Part #73632)
    x
                Bert Racing Transmission Replacement Parts
            
  • Falcon Transmission 67556 Rear Shaft Bearing
    Falcon Transmission 67556 Rear Shaft Bearing
    (Part #80267556)
    x
                

    Replacement parts for Falcon racing transmission.

  • Hurst Shifters 5384106 Shifter Stick, T-5/T-56 Transmission, 10 Inch
    New
    Hurst Shifters 5384106 Shifter Stick, T-5/T-56 Transmission, 10 Inch
    (Part #4404106)
    x
                These Hurst  bolt-on shifter sticks are perfect for use where a particular height or  offset is required. Constructed from high  strength steel, these are stamped with the Hurst name. All sticks  incorporate a 3/8" - 16 thread size.
    • Classic Hurst look
    • Designed to fit any Hurst shifter utilizing a two-bolt design
    • Chrome plated
  • Bert Transmission 15 Counter Shaft O-Ring
    Bert Transmission 15 Counter Shaft O-Ring
    (Part #73615)
    x
                Bert Racing Transmission Replacement Parts
            

Filter

"Oval Track, Manual Trans Components" Page 1 of 8

Page 1 of 8

  • Bert Transmission 371-H Steel HTD Hub
    Bert Transmission 371-H Steel HTD Hub
    (Part #736371)
    x
                Bert Racing Transmission Replacement Parts
            
  • Brinn 71040 Bushing and Seal for Part Number 22072024
    Brinn 71040 Bushing and Seal for Part Number 22072024
    (Part #22071040)
    x
                Brinn replacement parts for Brinn Racing Transmissions.
            
  • Falcon Transmission 62350-18 Steel Drive Flange, w/1986-Up Chevy Crank
    Falcon Transmission 62350-18 Steel Drive Flange, w/1986-Up Chevy Crank
    (Part #80262350)
    x
                

    Replacement parts for Falcon racing transmission.

    One piece rear main seal.

  • Quick Time RM-6057 Ford FE 352-390-427-428 Bellhousing- T10 & Toploader
    Quick Time RM-6057 Ford FE 352-390-427-428 Bellhousing- T10 & Toploader
    (Part #91027017)
    x
                

    These strong, lightweight steel bellhousings are just the ticket for installing a Borg-Warner T10 or Toploader 4-speed manual transmission behind your favorite V8 engine. We're now offering them for Ford FE 352, 390, 427, 428.

    The compact design allows the bellhousings to fit in tight quarters and most will accommodate up to a 12" clutch. Set up to use an original style clutch fork and release bearing, but can also be used with hyraulic release bearings.

    •      Height = 6.425
    •      Trans. Bore Ø = universal 4.85/4.910/4.685
    •      Engine = Ford 352/390/427/428
    •      Trans. = Universal early toploaders/Borgwarner T10/Muncie, Jerico 4-5 Speed/Short Shaft TKO, Ford and Chevy 500-600
    •      Clutch Ø = 12"
    •      Flywheel = 184 tooth
    •      Weight = 23#
    •      Universal shifter fork brackets for diaphram or cable operated linkage
    •      Fork brackets, full engine plate and grade 8 bolts included

     

  • Quick Time RM-8010 Ford 400-429-460 Steel Bellhousing - T5 & TKO
    Quick Time RM-8010 Ford 400-429-460 Steel Bellhousing - T5 & TKO
    (Part #91027024)
    x
                

    These strong, lightweight steel bellhousings are just the ticket for installing a Borg-Warner T5 or Tremec TKO manual transmission behind your favorite V8 engine. We're now offering them for big block Ford 400, 429 and 460.

    The compact design allows the bellhousings to fit in tight quarters and most will accommodate up to a 10-1/2" clutch. Set up to use an original style clutch fork and release bearing, but can also be used with hyraulic release bearings.  

    Drilled for most major throwout bearings. Includes lower flywheel cover.

    •      Height = 7.050
    •      Trans. Bore Ø = Universal 4.910/4.685
    •      Engine = Ford 351m, 400, 429, 460
    •      Trans. = Universal Ford TKO 500-600/T5 Mustang/TR3550
    •      Clutch Ø = 12"
    •      Flywheel = 176 tooth
    •      Weight = 22#
    •      Universal fork brackets for diaphragm or cable linkage
    •      Has passed all SFI testing
    •      Pivot ball, fork brackets, grade 8 bolts, and full engine plate included
  • Quick Time RM-6063 Ford 289-351W Steel Bellhousing - T10 & Toploader
    Quick Time RM-6063 Ford 289-351W Steel Bellhousing - T10 & Toploader
    (Part #91027016)
    x
                

    These strong, lightweight steel bellhousings are just the ticket for installing a manual transmission behind your favorite V8 engine. We're now offering them for small block Fords with 157 tooth flywheels.

    The compact design allows the bellhousings to fit in tight quarters. These steel bellhousings were designed to be as small as possible to allow more room in the transmission tunnel and firewall area. Will accommodate up to a 10-1/2" clutch. Set up to use an original style clutch fork and release bearing.  

    This bell housing will fit Toploader 4-Speeds and Borg-Warner T-10s from Fords.

    Includes lower flywheel cover.

     

  • Winters Performance 6250 Pro-Eliminator Shifter Rear Shaft, 5-7/8 Inch
    Winters Performance 6250 Pro-Eliminator Shifter Rear Shaft, 5-7/8 Inch
    (Part #8026250)
    x
                

    Pro-Eliminator and Winters Rearend Replacement Parts

    • Winters Shifter Rear Shaft, 5-7/8 Inch

    Speedway Motors has everyting you need to repair or upgrade your Winters quick change rearend. From center sections and gear sets to bearings, washers and O-Rings, we can help you get your rear back on the track!

    Winters Replacement Parts Figure (PDF)

    Pro Eliminator Rear End Diagram (GIF) 

  • Falcon Transmission 62348-18 Steel Drive Flange w/ 55-85 Chevy Crank
    Falcon Transmission 62348-18 Steel Drive Flange w/ 55-85 Chevy Crank
    (Part #80262348)
    x
                

    Replacement parts for Falcon racing transmission.

  • Bert Transmission 14 Counter Shaft Lock Washer
    Bert Transmission 14 Counter Shaft Lock Washer
    (Part #73614)
    x
                Bert Racing Transmission Replacement Parts
            
  • Bert Transmission 303 Idler Gear
    Bert Transmission 303 Idler Gear
    (Part #736303)
    x
                Bert Racing Transmission Replacement Parts
            
  • Speedway Chevy/Ford Steel Bellhousing
    Speedway Chevy/Ford Steel Bellhousing
    (Part #91027001)
    x
                These steel bellhousings are WISSOTA approved for Midwest Modifieds and work with both small block Chevy and small block Ford engine bolt patterns.  They allow for use with Muncie/Saginaw style transmissions.
    • SBC and SBF engine bolt patterns
    • Adapts either engine to Muncie/Saginaw pattern transmissions including BERT, Brinn, Falcon, etc.
    • Bottom opening for easy access
    • Does NOT have provision for stock style clutch arm
    • WISSOTA approved for Midwest Modifieds
    • Non SFI rated
    • NOT for street use
    • Must be used with a 153 tooth (Chevy) or 157 tooth (Ford) or smaller flexplate/flywheel
    • Made in the USA
  • AFCO 64001-36 Shifter Rod, 36 Inch Long
    $14.99
    $16.99
    AFCO 64001-36 Shifter Rod, 36 Inch Long
    (Part #1066400136)
    x
                AFCO shifter rods for 2-lever shifter.
    • Each rod uses two 3/8" RHM rod ends
    • Requires a LH and RH rod end
    • 36 Inch Long
    • 2 lever standard: (1) 16" & (1) 24" rod
  • Bert Transmission 3 Tail Housing, Late Model
    Bert Transmission 3 Tail Housing, Late Model
    (Part #7363)
    x
                Bert Racing Transmission Replacement Parts
            
  • Brinn 73033 Transmission Small Block Ford Aluminum Drive Flange
    Brinn 73033 Transmission Small Block Ford Aluminum Drive Flange
    (Part #22073033)
    x
                

    Drive flange for Brinn transmissions. 

  • Web Only Special - Falcon Racing Transmission with Free Tranny Stand
    Web Only Special - Falcon Racing Transmission with Free Tranny Stand
    (Part #8026010)
    x
                LIMITED TIME OFFER: Get a free transmission stand when you order this Falcon S/B Chevy Racing Transmission!!!

    For one low cost you can have an aluminum transmission with an internal hydraulic clutch, engine coupler, reverse and two forward speeds, (2.4 to 1 first, 1 to 1 high).

    Lightweight gears.

    Simply bolt to your scatter shield, hook up your hydraulic clutch pedal and go!

    21-5/8" long at 43 pounds. Use 153 tooth flexplates.

  • Bert Transmission 301C/371H/370 S/B Chevy Aluminum Bell Housing
    Bert Transmission 301C/371H/370 S/B Chevy Aluminum Bell Housing
    (Part #736301)
    x
                

    Features:

    • Bert SBC aluminum bellhousing
    • Bert Steel coupler with HTD hub for early 2 piece rear main crankshaft
    • Bert Flywheel ring
Goto Previous PagePrevious Page
1 2 3 4 5 ... 8