Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 8

Products

Leaf Springs and Accessories

Speedway Motors is the winner's choice for racing suspension and steering components! Speedway stocks the absolute best in racing shocks, coil-overs, and racing coil springs. Check out our assortment of IMCA-approved tubular control arms and spindles. For the rear suspension, combine our racing leaf springs with an adjustable pull bar and panhard bar for improved traction. Mount your Grand National 9'' Ford or quickchange rearend with quality Speedway birdcages, swedged rods and heims. With so many choices of power steering pumps, boxes and U-joints, you won't need to shop anywhere else!

Featured Products
  • Speedway Leaf Spring U-Bolt, 10 Inch Long
    Speedway Leaf Spring U-Bolt, 10 Inch Long
    (Part #91043800)
    x
                

    Speedway leaf sping axle U-bolts are heat treated and zinc plated to ensure long life and durability. All bolts are 1/2" diameter. Fits 3" diameter axle tubes.

  • Nylon Shackle Kits, 1-3/4 Inch Wide Spring
    Nylon Shackle Kits, 1-3/4 Inch Wide Spring
    (Part #91033323)
    x
                

    Fits front or rear springs. All measurements are width of spring. All nylon bushed shackles are 1-1/2" shackle bolt center to shackle bolt center.

    Bushings are included. Bushing O.D. is 3/4".

     

    Leaf Spring Measuring Guide (Link)

  • Chevy Leaf Spring Bushing for Rear Eye
    Chevy Leaf Spring Bushing for Rear Eye
    (Part #91043250)
    x
                Polyurethane bushings for leaf spring rear eye and hanger. Fits Camaro, Firebird, and Nova springs. One pair of these leaf spring bushings does one spring eye or hanger.
            
  • Super Glide    Front Spring, 48 Inch Axle, Reverse Eye, Plain
    Super Glide Front Spring, 48 Inch Axle, Reverse Eye, Plain
    (Part #91033030)
    x
                

    Achieve a smoother, more comfortable ride with Speedway Super Glide™ springs for your 1928-1934 Ford front end! The ends of the spring leaves of a Super Glide™ spring have a unique nylon button which works as a dry lubricant to significantly reduce leaf-to-leaf friction. This allows the spring to move more easily, thereby giving a softer, quieter ride.

    • Quality tempered steel
    • Reverse eyes for a 1" drop compared to standard eye springs
    • Bare steel finish
    • Spring Width:  1-3/4"
    • Spring Mount Centerline:  36-3/8"
    • Free Arch:  4-3/4"
    • Drop:  1"

    Leaf Spring Measuring Guide (Link)

  • Front Frame Perch Kit, Low Ride Height
    Front Frame Perch Kit, Low Ride Height
    (Part #91633015)
    x
                

    This front spring perch kit welds to a 3" diameter crossmember tube and works with a 1-3/4" wide leaf spring. The "low ride height" perch kit has an additional 1-1/2" of drop over the "standard height" perch kit.

    Includes plain steel U-bolts.

  • Bronze Replacement Shackle Bushings for 1-3/4 Inch Shackle
    Bronze Replacement Shackle Bushings for 1-3/4 Inch Shackle
    (Part #91033327)
    x
                These bronze replacement shackle bushing sets  consist of (8) bushings which will fit 1 pair of shackles. Bushings are  for a 3/4" spring eye or perch and accept shackles having 1/2" shaft or  bolt. 

    Fits Speedway shackles:

        91033323-CHR
        91033323-SS
        91033323-ZINC
  • AFCO 20101 Dual Stage Spring Spacer
    AFCO 20101 Dual Stage Spring Spacer
    (Part #10620101)
    x
                

    AFCO Small Body Dual Stage Coil-Over Components.

    Instructions (PDF) 

  • Adjustable Lowering Block
    $29.99
    Product Rating: 5.00 Stars
    Adjustable Lowering Block
    (Part #91043320)
    x
                Adjustable lowering block allow you to adjust the lead in the rear  end. Available in 4 different heights: 1-1/2", 2", 2-1/2" or 3". All sizes are 2-1/2" wide. This item is sold individually.
            

Filter

"Oval Track, Leaf Springs and Accessories" Page 1 of 8

Page 1 of 8

  • Nylon Blocks for Standard Leaf Spring Sliders
    Nylon Blocks for Standard Leaf Spring Sliders
    (Part #91043304)
    x
                

    Long-wearing nylon blocks keep the car from binding up during suspension movement. Standard sliders require periodic replacement of nylon slider blocks.

  • AFCO 200036 Camaro Roller Bearing Leaf Spring Slider
    AFCO 200036 Camaro Roller Bearing Leaf Spring Slider
    (Part #106200036)
    x
                
    • Use in place of leaf spring shackles
    • Roller bearing design prevents binding
    • Frees up car during suspnesion movement
    • Pre-drilled holes for bolt-on application
    • Designed specifically for Camaro oval track racing leaf springs
  • Front Leaf Spring Bracket Mount
    Front Leaf Spring Bracket Mount
    (Part #91043308)
    x
                Weld-on front leaf spring bracket mount for Chrysler springs. 5/8" hole with an inside width of 3-3/16". Center of hole to the top of the bracket is approximately 1-3/4".
            
  • Leaf Spring Pinion Angle Shims
    Leaf Spring Pinion Angle Shims
    (Part #916433)
    x
                These aluminum leaf spring shims allow you to correct your pinion angle. Availalbe in 2° and 4° angles. Fits 2-1/2" wide springs.
            
  • AFCO Leaf Spring Shackle Plate, Aluminum
    AFCO Leaf Spring Shackle Plate, Aluminum
    (Part #10620235)
    x
                
    • 5/16" thick 6061 T6 aluminum
    • 1/2" diameter holes
    • Sold individually (1 pc)
  • Bronze Replacement Shackle Bushings for 2 Inch Shackle
    Bronze Replacement Shackle Bushings for 2 Inch Shackle
    (Part #91033328)
    x
                These bronze replacement shackle bushing sets  consist of (8) bushings which will fit 1 pair of shackles. Bushings are  for a 3/4" spring eye or perch and accept shackles having 1/2" shaft or  bolt.

    Fits Speedway shackles:

        91033324-CHR
        91033324-SS
        91033324-ZINC
  • Speedway Chrysler Type Mono-Leaf Spring, 65 Lb. Rate, 7 Inch Arch
    Speedway Chrysler Type Mono-Leaf Spring, 65 Lb. Rate, 7 Inch Arch
    (Part #91720240)
    x
                

    Speedway circle track racing mono-leaf Chrysler type springs offer consistent quality at a great price! Each spring includes a front bushing.

    Speedway Spring Rate Chart (GIF)

  • Super Glide    Front Spring, 48 Inch Axle, Reverse Eye, Plain
    Super Glide Front Spring, 48 Inch Axle, Reverse Eye, Plain
    (Part #91033030)
    x
                

    Achieve a smoother, more comfortable ride with Speedway Super Glide™ springs for your 1928-1934 Ford front end! The ends of the spring leaves of a Super Glide™ spring have a unique nylon button which works as a dry lubricant to significantly reduce leaf-to-leaf friction. This allows the spring to move more easily, thereby giving a softer, quieter ride.

    • Quality tempered steel
    • Reverse eyes for a 1" drop compared to standard eye springs
    • Bare steel finish
    • Spring Width:  1-3/4"
    • Spring Mount Centerline:  36-3/8"
    • Free Arch:  4-3/4"
    • Drop:  1"

    Leaf Spring Measuring Guide (Link)

  • AFCO 20231HDRF Chrysler Reinforced Front Segment Leaf Spring - 166 lb
    AFCO 20231HDRF Chrysler Reinforced Front Segment Leaf Spring - 166 lb
    (Part #10620231HDRF)
    x
                Please view the product's page for more information
            
  • Speedway Standard Leaf Spring Sliders
    Speedway Standard Leaf Spring Sliders
    (Part #91043302)
    x
                

    Speedway standard leaf spring sliders bolt on in place of your shackles. Long-wearing nylon blocks keep the car from binding up during suspension movement.

    Designed for Chrysler type mono-leaf and multi-leaf racing springs. Must be modified to work with the Camaro/Nova/Firebird leaf springs.

    • Eliminates "jacking" problem associated with loading & unloading of the shackles
    • Helps maintain consistent spring rate for predictable handling
    • Requires periodic replacement of nylon slider blocks
    • Spring Type:  Chrysler
    • Spring Eye Rear:  1" I.D. 
    • Mounting holes on width are 1-3/4" center-to-center
    • Mounting holes on long side are 5" center-to-center

    Leaf Spring Slider Tech (GIF)

  • Landrum Spring Service 42-450SP Pinto Mini Stock Leaf Springs, 100 Lb
    Landrum Spring Service 42-450SP Pinto Mini Stock Leaf Springs, 100 Lb
    (Part #91742450SP)
    x
                

    Landrum Pony Stock circle track racing leaf springs use stock front bushings, Teflon inserts for less inter leaf friction, and less arch to lower roll center. For Pinto chassis.

    • Chrome vanadium alloy steel construction
    • Clench Clip System
    • Diamond Trimmed Leaves (superior to tapered end leaves)

    Mini Stock Spring Application Chart (GIF)

  • Speedway Weld-On Spring Pad for 3 Inch Axle Tube
    Speedway Weld-On Spring Pad for 3 Inch Axle Tube
    (Part #54585090)
    x
                

    These weld-on leaf spring pads fit 3" diameter axle tubes. Works with all 2-1/2" wide leaf springs.

Goto Previous PagePrevious Page
1 2 3 4 5 ... 8