Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Oval Track Ignitions At Speedway Motors

Speedway Motors is your number source for high performance racing ignition components. Our great assortment of HEI distributors, ignition boxes, and racing coils are sure to light your fire. Plus, Speedway stocks a complete listing of racing spark plugs for all popular applications.

"Oval Track, Ignition Coils" Page 1 of 1

  • MSD PRD10987 HEI Type Coil Cover
    MSD PRD10987 HEI Type Coil Cover
    x
                

    HEI Type Coil Cover.

  • Chrome Coil Mounting Bracket
    Chrome Coil Mounting Bracket
    x
                These chrome coil mounting brackets fit over stock coils. Adjustable from 2-1/8" to 2-5/16" with slight modification. 
            
  • MSD 84039 Replacement Coil Wire
    MSD 84039 Replacement Coil Wire
    x
                

    Coil socket terminal and boot on one side with a HEI distributor cap socket terminal and boot on the other. 18" long.

  • MSD 8202 Blaster 2 Ignition Coil
    MSD 8202 Blaster 2 Ignition Coil
    x
                

    If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD ignition, the Blaster Coil line is the right choice. Special 100:1 windings, kept cool in an oil filled metal canister, are used to provide maximum build-up of voltage.  The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. Can be used with a stock ignition, Blaster Ignition, or MSD 5, 6 or 7 Ignition Control.

    For use with stock or MSD electronic ignitions. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.

    • Improved output coil for stock points or electronic ignitions, Blaster Ignition, or MSD 5, 6, and 7 Series
    • Supplied with two plug wire boots, terminals, and jumper wire
    • 100:1 turns ratio and lower primary resistance produce high voltage output
    • MSD Red metal canister is filled with a premium grade oil for cooling
    • CARB E.O. Approved

    MSD Ignition Installation Instructions (PDF)


  • MSD 8213 Coil Bracket
    $6.99
    MSD 8213 Coil Bracket
    x
                

    The MSD Coil Bracket offers easy, univer­sal mounting for standard size ignition coils up to 2-1/4" in diameter. The Bracket uses a bolt and nut combination instead of the easily stripped self-tapping screw common on other brand brackets.  Perfect for cannister type coils

    Adustable from 1-3/4" to 2-3/8" with slight bending of mounting tabs.

  • PerTronix 60115 Flame-Thrower HV Coil, 1.5 Ohm
    PerTronix 60115 Flame-Thrower HV Coil, 1.5 Ohm
    x
                

    These high voltage E-core design coils by PerTronix put out an incredible 60,000 volts and are encased in a 6063 T-5 aluminum heat sink.

    • 1.5 Ohm primary resistance
    • 60,000 volts
    • 50 state legal

     

  • PerTronix 60104 Flame-Thrower HV Coil, 0.45 Ohm
    PerTronix 60104 Flame-Thrower HV Coil, 0.45 Ohm
    x
                

    These high voltage E-core design coils by PerTronix put out an incredible 60,000 volts and are encased in a 6063 T-5 aluminum heat sink. These coils are 50 state legal and are available with different resistance values for your application. Flame-Thrower HV .046 ohm coils are also compatible with most capacitive discharge boxes.

    • 0.45 Ohm primary resistance
    • 60,000 volts
    • 50 state legal

     

  • PerTronix D3070 Flame-Thrower HEI Igniton Coil, Race Only
    PerTronix D3070 Flame-Thrower HEI Igniton Coil, Race Only
    x
                

    This ignition coil can be used as a replacement for the PerTronix Flame-Thrower HEI distributor 447-1071 or as a race only coil for your GM HEI distributor with an internal coil. When paired with matching module 447-2070, this coil will produce 42% more energy than a comparable street/strip coil with 46% faster spark breakdown time allowing 48% more peak current to reach the spark plug between 6000 and 8500 RPM.

    • 90:1 turn ratio
    • 0.35 Ohms primary resistance
    • 50,000 max voltage
    • Use with module 447-2070
  • MSD 8250 Power-Core HVC Ignition Coil
    MSD 8250 Power-Core HVC Ignition Coil
    x
                

    The MSD HVC coil is designed exclusively for the HVC Professional Racing Ignition Control (#547-6600). The E-Core design of the HVC Coil is more efficient in producing more output with less loss.

    547-8250 Instructions (PDF)

  • Crane Cams 730-0192 PS92N Fireball Race Coil
    Crane Cams 730-0192 PS92N Fireball Race Coil
    x
                

    Coil for use with CD systems only. Recommended for race applications and extended high RPM use. Includes lightweight black anodized aluminum bracket.

  • MSD 8203 Blaster 2 Ignition Coil w/ Resistor
    MSD 8203 Blaster 2 Ignition Coil w/ Resistor
    x
                

    If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD ignition, the Blaster Coil line is the right choice. Special 100:1 windings, kept cool in an oil filled metal canister, are used to provide maximum build-up of voltage.  The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. Can be used with a stock ignition, Blaster Ignition, or MSD 5, 6 or 7 Ignition Control.

    The 0.8 ohm ballast resistor must be used with stock points ignition and Mallory Unilite applications. Includes MSD Power Tower top.

    • Improved output coil for stock points or electronic ignitions, Blaster Ignition, or MSD 5, 6, and 7 Series
    • Supplied with two plug wire boots, terminals, and jumper wire
    • 100:1 turns ratio and lower primary resistance produce high voltage output
    • MSD Red metal canister is filled with a premium grade oil for cooling

    MSD Blaster 2 Ignition Installation Instructions (PDF)

  • MSD 84022 Extreme HEI Coil Cover
    MSD 84022 Extreme HEI Coil Cover
    x
                

    Replacement coil dust cover for MSD Extreme Output HEI Kit # 547-8502. Made from DuPont Rynite.

  • Speedway High Performance HEI Coil
    Speedway High Performance HEI Coil
    x
                Direct replacement for OE coil on your HEI distributor. Special low inductance, high temperature windings which charge the coil faster to give increased spark energy at high RPM.
            
  • PerTronix 60130 Flame-Thrower HV Coil, 3.0 Ohm
    PerTronix 60130 Flame-Thrower HV Coil, 3.0 Ohm
    x
                

    These high voltage E-core design coils by Pertronix put out an incredible 60,000 volts and are encased in a 6063 T-5 aluminum heat sink. These coils are 50 state legal and are available with different resistance values for your application.

    • 3.0 Ohm primary resistance
    • 60,000 volts
    • 50 state legal

     

  • MSD 8261 HVC II Coil for 7 Series Ignitions
    MSD 8261 HVC II Coil for 7 Series Ignitions
    x
                

    The Pro Power HVC II Coil is completely built in-house at MSD so engineers have exclusive control over the performance and qual­ity. The coil utilizes an iron U-Core design with a segmented bobbin for improved voltage distribution. The bobbin is molded from Dupont Rynite FR946 material which has incredible dielectric capabilities at high temperatures. MSD also incorporated a cutting edge winding material that has an improved insulation and is also capable of enduring extreme volt­ages. Together, these materials create a durable coil with incredible voltage capabilities, lightning quick rise time and lengthy spark duration. The housing, also molded from Rynite material, features far spaced brass primary terminals and a well protected secondary tower for increased spark isolation. The housing is completely potted with an epoxy compound for vibration resistance and installs with sturdy vibration mounts.

    For use with MSD 7 and 8 Series Ignitions.

    Instruction Sheet for 547-8261 (PDF)

  • MSD 8253 HVC II Coil for 6 Series Ignitions
    MSD 8253 HVC II Coil for 6 Series Ignitions
    x
                

    The latest coil to be built entirely in-house at MSD is designed to be used with MSD 6 Series Ignition Controls. This coil utilizes an iron U-Core design with a segmented bobbin for improved voltage distribution. The bobbin is molded from a special Dupont Rynite material and wound specifically to produce the most current possible with incredible voltage and lightning quick rise time. The blue housing is also molded from high dielectric Rynite material. The brass primary terminals are spaced far apart and the secondary tower is well protected for increased spark isolation. The housing is completely potted with an epoxy compound for vibration resistance and installs with sturdy vibration mounts.

    • Designed for high rpm, long duration applications using MSD 6 Series Ignitions
    • New U-core winding design produces more voltage and current
    • 100:1 turns ratio and lower primary resistance produce high voltage output
    • Windings are encased in fracture resistant compound for vibration resistance
    • Dupont Rynite housing with isolated tower and brass primary terminals
    • Supplied with rubber shock mounts

    547-8253 Instructions (PDF)

  • Accel 140003 GM High Energy HEI Super Coil, Red/Yellow
    Accel 140003 GM High Energy HEI Super Coil, Red/Yellow
    x
                Delivers more voltage for faster starting and more efficient combustion. Fits GM HEI '73-'91 vehicles. Features ultra-fine magnet wire, high strength case with cooling ribs, cap head through bolts and carbon brush spring and coil gasket. Street legal. 0.50 OHM. 
            
  • MSD 8225 HEI High Performance Direct Replacement Coil
    MSD 8225 HEI High Performance Direct Replacement Coil
    x
                

    HEI owners now have a choice to replace their stock coil with the MSD High Energy Unitized Coil for GM HEI Distributors. This coil is a direct re­placement of the stock coil. The coil features special low induc­tance, high temperature windings which charge faster to give you increased spark energy at higher rpm. The premium epoxy filled construction is designed to withstand harsh race applications as well as the wear and tear that daily usage dishes out, and still deliver more spark energy to the spark plugs.

    • Direct performance replacement for GM HEI coil-in-cap distributors
    • 70:1 turns ratio and lower primary resistance produce high voltage output
    • Full power sparks to 9,000 RPM when used with 8364 MSD HEI Module
    • Recommended for use with MSD HEI Module PN 8364
  • MSD 8401 HEI Coil Conversion
    $32.99
    MSD 8401 HEI Coil Conversion
    x
                

    The modified HEI Dust Cover allows you to remove the stock HEI coil in your distributor cap, and replace it with an externally mounted coil such as the Blaster 2. Designed to be installed on stock HEI distributor caps with no modification.

    Instruction Sheet for 547-8401 (pdf)

  • Trans-Dapt 9366 Stand-Up Coil Brackets
    Trans-Dapt 9366 Stand-Up Coil Brackets
    x
                These stand-up coil brackets fit over stock coils. Chrome.
            
  • MSD 8207 Blaster SS Coil
    $49.99
    MSD 8207 Blaster SS Coil
    x
                

    Don’t let the compact size of the Blaster SS Coil fool you, because it is packed with performance! The efficient E-core windings are designed to produce high amounts of current without sacrificing the voltage output. In fact, when used with an MSD 6 Series Ignition, the Blaster SS produces 300 milliamps with a maximum voltage output of 40,000 volts! The secondary windings are wound on a segmented bobbin which reduces the chance of voltage breakdown between the primary and secondary windings. For more protection, these windings are encased in a polyurethane compound for complete protection against vibration. The Blaster SS features brass terminals and a sturdy Rynite housing. It is supplied with a 90° boot, terminal and vibration mounts. A great addition to CD Ignitions and some stock applications.

    • Improved output coil for electronic ignitions, and MSD Ignitions
    • Efficient winding design and assembly creates a compact housing
    • Primary and secondary windings are encased in Ciba polyurethane
    • 70:1 turns ratio and lower primary resistance produce high voltage output
    • Dupont Rynite housing with a tall tower and brass primary terminals

    547-8207 Instructions (PDF)

  • Electronic Ignition Coil
    $24.99
    Electronic Ignition Coil
    x
                

    Oil filled heavy duty coils are guaranteed to out perform your stock unit delivering over 30% more spark energy. The oil filled design and arc resistant top, results in superior performance. The coil delivers the added voltage required by street and strip performance engines, and will fit in most standard OEM brackets. 

    This 12V Ignition Coil will deliver the added voltage required by street and strip performance engines. For use with CD Ignition Control Box 910-2015.

  • Garage Sale - Accel Racing Coil, 1957-1974 Ford
    Garage Sale
    Garage Sale - Accel Racing Coil, 1957-1974 Ford
    x
                

    Delivers increased voltage and higher spark energy than conventional coils.  Vacuum-filled with premium grade transformer oil.  Spring-loaded, special winding design and silica steel core eliminates failure due to sustained vibration.  Compatible with OEM internal resistance specifications.  For 1957-1974 Ford 12 volt.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - Steel Coil Mounting Bracket
    Garage Sale
    Garage Sale - Steel Coil Mounting Bracket
    x
                

    The coil bracket offers easy, univer­sal mounting for standard size ignition coils up to 2-1/4" in diameter. The Bracket uses a bolt and nut combination instead of the easily stripped self-tapping screw common on other brand brackets.  Perfect for cannister type coils

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Garage Sale - Accel 140306 Direct Connect Chrome Chrysler Racing Coil
    Garage Sale
    Garage Sale - Accel 140306 Direct Connect Chrome Chrysler Racing Coil
    x
                

    This is garage sale priced because it has been discontinued. 

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

     

    Accel Super Coil chrome ignition coil. The hotter the spark, the easier your engine will start, and this coil is just the ticket to a quick start! Its higher voltage allows larger spark plug gaps for added power, smoother response and better fuel economy. 

  • Garage Sale - MSD 6 HVC Power-Core Ignition Coil
    Garage Sale
    Garage Sale - MSD 6 HVC Power-Core Ignition Coil
    x
                

    The MSD HVC coil is designed exclusively for the HVC Professional Racing Ignition Control (#547-6600). The E-Core design of the HVC Coil is more efficient in producing more output with less loss.

    547-8250 Instructions (PDF)

     

    This coil is garage sale priced because it has been installed and returned. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS