Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 4

Products

Ignition Coils

Shop Oval Track Ignitions At Speedway Motors

Speedway Motors is your number source for high performance racing ignition components. Our great assortment of HEI distributors, ignition boxes, and racing coils are sure to light your fire. Plus, Speedway stocks a complete listing of racing spark plugs for all popular applications.

Featured Products
  • MSD 8202 Blaster 2 Ignition Coil
    MSD 8202 Blaster 2 Ignition Coil
    (Part #5478202)
    x
                

    If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD ignition, the Blaster Coil line is the right choice. Special 100:1 windings, kept cool in an oil filled metal canister, are used to provide maximum build-up of voltage.  The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. Can be used with a stock ignition, Blaster Ignition, or MSD 5, 6 or 7 Ignition Control.

    For use with stock or MSD electronic ignitions. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.

    • Improved output coil for stock points or electronic ignitions, Blaster Ignition, or MSD 5, 6, and 7 Series
    • Supplied with two plug wire boots, terminals, and jumper wire
    • 100:1 turns ratio and lower primary resistance produce high voltage output
    • MSD Red metal canister is filled with a premium grade oil for cooling
    • CARB E.O. Approved

    MSD Ignition Installation Instructions (PDF)

    MSD Rebate (Link)


  • MSD 8401 HEI Coil Conversion
    $39.99
    MSD 8401 HEI Coil Conversion
    (Part #5478401)
    x
                

    The modified HEI Dust Cover allows you to remove the stock HEI coil in your distributor cap, and replace it with an externally mounted coil such as the Blaster 2. Designed to be installed on stock HEI distributor caps with no modification.

    Instruction Sheet for 547-8401 (pdf)

    MSD Rebate (Link)

  • MSD 8228 Dodge Late Model Coil, 2 Pin
    $46.99
    $55.99
    MSD 8228 Dodge Late Model Coil, 2 Pin
    (Part #5478228)
    x
                The MSD Blaster coil is a direct replacement for late model Dodges.

    Installation Instructions (PDF)

    • Direct performance replacement for late model Dodge vehicles
    • Works with stock ignition as well as MSD Ignitions
    • CARB E.O. Approved
    • 2.91736111111111
    • 13.7K OHMs
    • 3.9mH
    • 40,000 Volts
  • MSD 84039 Replacement Coil Wire
    MSD 84039 Replacement Coil Wire
    (Part #54784039)
    x
                

    Coil socket terminal and boot on one side with a HEI distributor cap socket terminal and boot on the other. 18" long.

    MSD Rebate (Link)

  • Chrome Coil Mounting Bracket
    Chrome Coil Mounting Bracket
    (Part #91017490)
    x
                These chrome coil mounting brackets fit over stock coils. Adjustable from 2-1/8" to 2-5/16" with slight modification. 
            
  • MSD 8214 Coil Ballast Resistor 0.8 ohm
    MSD 8214 Coil Ballast Resistor 0.8 ohm
    (Part #5478214)
    x
                For use with an MSD Blaster Coil when connected to a stock points ignition system.
    • Use with older points style ignitions
  • MSD 88867 LS Coil Harness
    $53.99
    MSD 88867 LS Coil Harness
    (Part #54788867)
    x
                This harness has been made by MSD to correct a check engine light issue that can arise in vehicles using the MSD LS Coil Packs on their engines. This harness will supply additional battery voltage to the coils in order to fire the coils properly and not drain other engine systems of power. This is necessary due to the varying wire gauges used on production vehicles.

    Installation Instructions (PDF)

    • Corrrects check engine light
  • MSD 82868 GM LQ Truck Series MSC Coil, 8-Pack
    MSD 82868 GM LQ Truck Series MSC Coil, 8-Pack
    (Part #54782868)
    x
                Click here identify your LS coil. MSD Ignitions Multiple Spark Coils (MSC) will fit in place of the stock Gen-III GM coils and connect directly to the factory connec­tors. Once installed, youll have the power and performance of higher energy sparks, crowned with MSDs multiple spark discharge. Increased spark energy and voltage, along with multiple spark capabilities, help improve the combustion process of the fuel mix­ture to create an efficient burn. This results in improved throttle response, smooth idle and quick starts, plus increased high rpm performance!There are two types of housings for the MSD Coils. Check your ap­plication for the visual match.

    Installation Instructions (PDF)

    MSD Rebate -  October 1, 2014 - October 31, 2014

    • Improved spark energy and voltage output
    • Patented winding design and materials
    • Direct bolt-in to factory connectors
    • 2.33402777777778
    • .73 ohms
    • 3.7K ohms
    • 3.6 mH
    • 124 mA
    • 1110 us
    • 93 mj
    • 40KV

Filter

"Oval Track, Ignition Coils" Page 1 of 4

Page 1 of 4

  • MSD 8248 Blaster Coil 5.0L Coyote
    MSD 8248 Blaster Coil 5.0L Coyote
    (Part #5478248)
    x
                The all new Ford 5.0L Coyote engine is hot, but MSD now offers a coil that will make it even hotter! MSD developed a replacement coil that incorporates improved windings and material to increase the output of the coil. Also, when other modifications are being added, you can rely on the Blaster Coil to recover quicker through high rpm with a powerful spark to promote combustion.
    • Improved high rpm operation
    • Patented winding design and materials
    • Direct bolt-in to factory connectors
    • 3.33402777777778
    • .51 ohms
    • Intnal Diode
    • 1.9 mH
    • 100 mA
    • 120 us
    • 48 mj
    • 32KV
  • MSD 84049 Coil Wire for Blaster Coil, Socket Cap
    MSD 84049 Coil Wire for Blaster Coil, Socket Cap
    (Part #54784049)
    x
                Coil wire for use with Blaster Coil and Socket style cap.
            
  • MSD 82488 Blaster Coil 5.0L Coyote Set of 8
    MSD 82488 Blaster Coil 5.0L Coyote Set of 8
    (Part #54782488)
    x
                

    The all new Ford 5.0L Coyote engine is hot, but MSD now offers a coil that will make it even hotter! MSD developed a replacement coil that incorporates improved windings and material to increase the output of the coil. Also, when other modifications are being added, you can rely on the Blaster Coil to recover quicker through high rpm with a powerful spark to promote combustion.

    MSD Rebate -  October 1, 2014 - October 31, 2014

    • Improved high rpm operation
    • Patented winding design and materials
    • Direct bolt-in to factory connectors
    • 3.33402777777778
    • .51 ohms
    • Intnal Diode
    • 1.9 mH
    • 100 mA
    • 120 us
    • 48 mj
    • 32KV
  • MSD 8287 Multiple Spark Plug Coil for LS2, LS3, LS7 Engines, Single
    MSD 8287 Multiple Spark Plug Coil for LS2, LS3, LS7 Engines, Single
    (Part #5478287)
    x
                Click here identify your LS coil. MSD Ignitions Multiple Spark Coils (MSC) will fit in place of the stock Gen-III GM coils and connect directly to the factory connec­tors. Once installed, youll have the power and performance of higher energy sparks, crowned with MSDs multiple spark discharge. Increased spark energy and voltage, along with multiple spark capabilities, help improve the combustion process of the fuel mix­ture to create an efficient burn. This results in improved throttle response, smooth idle and quick starts, plus increased high rpm performance!There are two types of housings for the MSD Coils. Check your ap­plication for the visual match.

    Installation Instructions (PDF)

    • Improved spark energy and voltage output
    • Patented winding design and materials
    • Direct bolt-in to factory connectors
    • 2.41736111111111
    • .48 ohms
    • 2.2K ohms
    • 1.9mH
    • 124
    • 833 us
    • 70 mj
    • 40KV
  • MSD 8242 Ford Coil on Plug SOHC 4.6L And 5.4L 2V Single
    MSD 8242 Ford Coil on Plug SOHC 4.6L And 5.4L 2V Single
    (Part #5478242)
    x
                The improved spark energy and voltage of MSDs Blaster 2 Coils, combined with reliability, have made them a favorite for performance enthusiasts. Whether firing a restored BOSS 429 or a Saturday night circle tracker, the Blaster 2 has always gotten the job done. MSD is excited to offer Blaster coils for late model Ford engines with Coil-on-Plug technology! The new Blaster CoPs are designed as a direct bolt-in replacement coil for many SOHC Modular Motors. The housing and installation are the same as the factory, but thats where the similarity ends. Inside the MSD red housing, engineers specd better material to assemble the primary and secondary windings.  The Coil-on-Plug design of the Blaster CoPs puts the spark energy right out of the coil and across the plug gap to improve the combustion and output of the engine. The Blaster 2 CoPs are available individually or as a complete set of eight.
    • 1999-2004 Fits 4.6L and 5.4L SOHC 2V
    • Improved spark energy and voltage output
    • Patented winding design and materials
    • Direct bolt-in to factory connectors
    • Factory replacement coil with improved spark energy and voltage.
    • .51 ohms
    • 5.7K ohms
    • 1.7 mH
    • 100 mA
    • 750 us
    • 38 mj
    • 25KV
  • PerTronix 60115 Flame-Thrower HV Coil, 1.5 Ohm
    PerTronix 60115 Flame-Thrower HV Coil, 1.5 Ohm
    (Part #44760115)
    x
                

    These high voltage E-core design coils by PerTronix put out an incredible 60,000 volts and are encased in a 6063 T-5 aluminum heat sink.

    • 1.5 Ohm primary resistance
    • 60,000 volts
    • 50 state legal

     

  • PerTronix 60104 Flame-Thrower HV Coil, 0.45 Ohm
    PerTronix 60104 Flame-Thrower HV Coil, 0.45 Ohm
    (Part #44760104)
    x
                

    These high voltage E-core design coils by PerTronix put out an incredible 60,000 volts and are encased in a 6063 T-5 aluminum heat sink. These coils are 50 state legal and are available with different resistance values for your application. Flame-Thrower HV .046 ohm coils are also compatible with most capacitive discharge boxes.

    • 0.45 Ohm primary resistance
    • 60,000 volts
    • 50 state legal

     

  • MSD 8211 Firewall Feed Thru, Red
    $16.99
    $18.99
    MSD 8211 Firewall Feed Thru, Red
    (Part #5478211)
    x
                To prevent voltage leaks in passenger compartment mounted coil installations, MSD designed the Firewall Feed-Thru. Molded from Rynite® and nylon, the Firewall Feed-Thru provides 1/2  of insula­tion to ensure that the coils spark reaches the distributor.

    Installation Instructions (PDF)

    • Absolutely the best way to route spark plug wire through the firewall
  • MSD 82568 Hemi Coil-on-Plug, 2003-05, 8-Pack
    MSD 82568 Hemi Coil-on-Plug, 2003-05, 8-Pack
    (Part #54782568)
    x
                Fire up your late model Hemi with a set of MSDs Blaster Coils. The Coils are a direct bolt-in and are specd with superior materials and winding ratios to improve the output of the coil while retaining the factory fit.

    Installation Instructions (PDF)

    MSD Rebate -  October 1, 2014 - October 31, 2014

    • Improved high rpm operation
    • Patented winding design and materials
    • Direct bolt-in to factory connectors
    • For early model Hemis, '03-'05
    • .6 ohms
    • 7.2K ohms
    • 3.6 mH
    • 72 mA
    • 1150 us
    • 62 mj
    • 35KV
  • PerTronix D3070 Flame-Thrower HEI Igniton Coil, Race Only
    PerTronix D3070 Flame-Thrower HEI Igniton Coil, Race Only
    (Part #4473070)
    x
                

    This ignition coil can be used as a replacement for the PerTronix Flame-Thrower HEI distributor 447-1071 or as a race only coil for your GM HEI distributor with an internal coil. When paired with matching module 447-2070, this coil will produce 42% more energy than a comparable street/strip coil with 46% faster spark breakdown time allowing 48% more peak current to reach the spark plug between 6000 and 8500 RPM.

    • 90:1 turn ratio
    • 0.35 Ohms primary resistance
    • 50,000 max voltage
    • Use with module 447-2070
  • MSD 82448 Ford Blaster COP 99-04 4.6L, 5.4L 4V DOHC, 8-Pack
    MSD 82448 Ford Blaster COP 99-04 4.6L, 5.4L 4V DOHC, 8-Pack
    (Part #54782448)
    x
                The housing and installation of our Ford Blaster Coil-on-Plugs are the same as the factory, but that's where the similarity ends. Inside the MSD red housing, engineers spec'd better material to assemble the primary and secondary windings.  The Coil-on-Plug design puts the spark energy right out of the coil and across the plug gap to improve the combustion and output of the engine.

    Installation Instructions (PDF)

    MSD Rebate -  October 1, 2014 - October 31, 2014

    • Fits 1999-2004 4.6L/5.4L DOHC 4V
    • Factory replacement
    • 3.12569444444444
    • .49 ohms
    • 5.6K ohms
    • 1.2mH
    • 70 mA
    • 600 us
    • 21 mj
    • 25KV
  • MSD 82428 Ford COP SOHC 4.6L, 5.4L 2V 8-Pack
    MSD 82428 Ford COP SOHC 4.6L, 5.4L 2V 8-Pack
    (Part #54782428)
    x
                Please view the product's page for more information
            
  • MSD 8216 GM LS2, LS7 Engine Coil Brackets
    MSD 8216 GM LS2, LS7 Engine Coil Brackets
    (Part #5478216)
    x
                LS Engines are outstanding when it comes to performance, however their aesthetics leave a lot to be desired. Specifically when it comes to the coils and their factory stamped  brackets. MSD is excited to offer two new brackets for use on MSD engines that will help clean up the coil installation. These new brackets are made from cast aluminum with a machined finish to deliver strength and great looks. The brackets are supplied with all new mounting hardware and accept either OEM or MSD style coils!

    Installation Instructions (PDF)

    • For LS2/LS7 OE Coils
    • Also fits MSD MSC Coils
  • MSD 8231 GM 96-97 External Single Connector Coil
    MSD 8231 GM 96-97 External Single Connector Coil
    (Part #5478231)
    x
                Used on 1996-1999 GM vehicles.

    Installation Instructions (PDF)

    • Direct performance replacement for GM Coil, 1996-1999
    • 80:1 turns ratio and lower primary resistance produce high voltage output
    • Works with stock ignition as well as MSD Ignitions
    • CARB E.O. Approved
    • 3.33402777777778
    • 6.5K OHMs
    • 3.9mH
    • 40,000 Volts
  • MSD 8215 GM LS1, LS6 Engine Coil Brackets
    MSD 8215 GM LS1, LS6 Engine Coil Brackets
    (Part #5478215)
    x
                LS Engines are outstanding when it comes to performance, however their aesthetics leave a lot to be desired. Specifically when it comes to the coils and their factory stamped  brackets. MSD is excited to offer two new brackets for use on MSD engines that will help clean up the coil installation. These new brackets are made from cast aluminum with a machined finish to deliver strength adn great looks. The brackets are supplied with all new mounting hardware and accept either OEM or MSD style coils!

    Installation Instructions (PDF)

    • For LS1/LS6 OE Coils
    • Also fits MSD MSC Coils
  • MSD 8250 Power-Core HVC Ignition Coil
    MSD 8250 Power-Core HVC Ignition Coil
    (Part #5478250)
    x
                

    The MSD HVC coil is designed exclusively for the HVC Professional Racing Ignition Control (#547-6600). The E-Core design of the HVC Coil is more efficient in producing more output with less loss.

    547-8250 Instructions (PDF)

    MSD Rebate (Link)

  • MSD 8230 Single Tower, Isolated Ground Coil
    MSD 8230 Single Tower, Isolated Ground Coil
    (Part #5478230)
    x
                The MSD Single Tower Coil can be used in several applications with MSD's DIS Ignition Controls.

    Installation Instructions (PDF)

    • Designed for coil-per-cylinder racing applications with MSD DIS-HO Ignitions
    • 70:1 turns ratio and lower primary resistance produce high voltage output
    • Brass spark plug style terminal and epoxy molded housing
    • No CARB Exemption Order Number
  • MSD 8402 HEI Distributor Coil Cover
    MSD 8402 HEI Distributor Coil Cover
    (Part #5478402)
    x
                HEI Distributor coil cover.
    • Crane Cams 730-0192 PS92N Fireball Race Coil
      Crane Cams 730-0192 PS92N Fireball Race Coil
      (Part #28801920)
      x
                  

      Coil for use with CD systems only. Recommended for race applications and extended high RPM use. Includes lightweight black anodized aluminum bracket.

    • MSD 8202 Blaster 2 Ignition Coil
      MSD 8202 Blaster 2 Ignition Coil
      (Part #5478202)
      x
                  Please view the product's page for more information
              
    Goto Previous PagePrevious Page
    1 2 3 4