Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products

Speedway Motors is the circle track engine authority! Whether you have a Ford or Chevy race motor, Speedway has the engine parts you need at the best prices around. Our large assortment of iron cylinder heads, performance camshafts and racing valve train components allows you to tailor your engine to any racing condition. Speedway also has a variety of durable claimer engine kits, oil pumps and oil pans to help keep costs down without sacrificing performance or reliability.

"Oval Track, Gaskets and Seals" Page 1 of 5

  • Fel-Pro P1003 S/B Chevy 265-400 Steel Ring Head Gasket 4.166 Inch Bore
    Fel-Pro P1003 S/B Chevy 265-400 Steel Ring Head Gasket 4.166 Inch Bore
    x
                

    These Fel-Pro gaskets work with both cast iron and aluminum heads. Pre-flattened steel wire ring gaskets have the strength of steel wire sealing with minimum brinelling of aluminum heads. Pre-flattened copper wire ring gaskets will not brinell aluminum heads. They offer superior heat dissipation. Multi-layer steel gaskets offer current leading-edge technology and provide a long-term, leakproof seal called Perma Torque MLS.

    • Gaskets are sold each
    • Pre-flattened steel wire
    • Nominal compression thickness: .041"
    • Compressed volume: 9.1 cc
    • 4.166" bore gaskets can be used on 400 race engines with up to 4.155" max bore with minimal chamfer
    • When using aluminum heads, we recommend gaskets with soft copper wire rings (such as 344-1010). This ensures that the aluminum head is not "scarred" by the combustion seal. Shim style 344-1094 will also work well with aluminum heads.

    Head Gasket Application (JPEG)

    Speedy Tip for Proper Head Gasket Seal (GIF)  

  • Fel-Pro Gaskets FS7525B 1949-53 Flathead Ford V8 Overhaul Gasket Set
    Fel-Pro Gaskets FS7525B 1949-53 Flathead Ford V8 Overhaul Gasket Set
    x
                

    If you're going to overhaul your Flathead, you're going to need new gaskets. This complete overhaul gasket set is for 1949-1953 Ford and Mercury flathead V8 engines. Includes all the necessary gaskets and seals you need for a typical engine rebuild.

    • High-quality gaskets for a leak-free engine
    • Modern composition head gaskets
    • Head gaskets will fit bores up to 3-3/16" (3.270")
    • Set includes gaskets for:
      • Cylinder Heads
      • Oil Pan
      • Rear Seal
      • Water Pumps
      • Front Packing
      • Fuel Pump
      • Water Necks
      • Timing Cover
      • Valve Seals
      • Intake Manifold
      • Exhaust Manifolds
  • SuperSeal Rear Cover Gasket for Halibrand Quick Change
    SuperSeal Rear Cover Gasket for Halibrand Quick Change
    x
                Our paper gaskets provide a great quality seal at a very low price. These gaskets are for popular Halibrand quickchange rear axles.
            
  • Offenhauser 1949-1953 Flathead Intake Gasket
    Offenhauser 1949-1953 Flathead Intake Gasket
    x
                

    These intake manifold gaskets for all 1949-1953 Ford/Mercury Flatheads are easy to trim for matching block ports and intake if necessary.

    • Intake manifold gasket
    • For all 1949-1953 Ford/Mercury Flatheads
    • Easy to trim for matching block ports and intake
  • EngineQuest AT350 Small Block Chevy Rear Main Alignment Tool
    EngineQuest AT350 Small Block Chevy Rear Main Alignment Tool
    x
                Small block Chevy rear main alignment tool
            
  • Best Gasket 536G-P 49-53 Flathead Ford GraphTite Big Bore Head Gaskets
    Best Gasket 536G-P 49-53 Flathead Ford GraphTite Big Bore Head Gaskets
    x
                

    These 1949-1953 Flathead Ford Head gaskets are for use with all bores from 3-1/16" to 3-3/8".

    • 1949-1953 Flathead Fords
    • GraphTite cylinder head gaskets
    • Use with all bores from 3-1/16" to 3-3/8"

    Note: Please use a spray-on sealer like K&W Copper Coat or Permatex Copper Spray-a-Gasket when installing these head gaskets. Be sure to re-torque the bolts/nuts after several warm-up/cool-down cycles.

  • Valve Cover Hold Down Clamps
    From: $5.99
    Product Rating: 5.00 Stars
    Valve Cover Hold Down Clamps
    x
                Set of eight for small block Chevy hold down clamps. Available in Zinc or Chrome and are 5" long overall.
            
  • Steel Shim SBC Timing Cover Seal Kit
    Steel Shim SBC Timing Cover Seal Kit
    x
                Steel shim seal holder required for KSE front covers.
            
  • Dura-Bond FKC-3HP B/B Chevy Engine Finishing Hardware
    Dura-Bond FKC-3HP B/B Chevy Engine Finishing Hardware
    x
                

    Kit Includes:

    • (4) Head Dowels
    • (4) Timing Cover / Oil Pump Dowels
    • (3) Cam Bolts
    • (1) Cam Lock Plate
    • (2) Oil Filter Adaptor Bolts
    • (2) Short Woodruff Keys
    • (2) Transmission Dowels
  • Small Block Chevy Copper Oil Pump Mounting Gaskets
    Small Block Chevy Copper Oil Pump Mounting Gaskets
    x
                

    Does your oil pump leak where it mounts to the main cap? Not anymore with our dead soft copper oil pump mounting gaskets.

    Bag of 3 gaskets.

  • Fel-Pro Gaskets 2330 Small Block Chevy Full Circle Timing Gasket
    Fel-Pro Gaskets 2330 Small Block Chevy Full Circle Timing Gasket
    x
                These Fel-Pro timing cover gaskets are ideal for high-performance and racing applications. Made of top-quality materials, these gaskets are designed to ensure a leak-free seal.
            
  • DEi 090400 SPA Turbo Gasket Eliminator & Flange Sealant, 14 Oz.
    DEi 090400 SPA Turbo Gasket Eliminator & Flange Sealant, 14 Oz.
    x
                
    Seal metal-on-metal gaps up to .050" in size with Spa Turbo Gasket Eliminator. It is a grey anaerobic paste that was developed for the turbo market and after curing is able to withstand high temperatures, high pressure, vibration, and moisture. Gasket Eliminator and Flange Sealant is a product your garage should never be without. It will help complete all projects on time and protect against all kinds of unseen problems that may arise.
    • Seals metal on metal gaps up to 0.050”
    • Cures within 3-4 minutes
    • Bonds to steel, aluminum, brass, and other alloys
    • Form-in-place gasket flexibility
    • Not model-specific; use on all vehicle makes and models
    • Suitable replacement for misplaced or lost exhaust gaskets
    • Head to Exhaust Manifold
    • Manifold to Turbine Housing
    • Manifold to Wastegate
    • Turbine Housing to Downpipe
  • SuperSeal Small Block Chevy Oil Pan Gasket, 1975-1985 One-Piece
    SuperSeal Small Block Chevy Oil Pan Gasket, 1975-1985 One-Piece
    x
                

    Small Block Chevy oil pan gasket by SuperSeal. 

    • Left Hand side ('55-'79) and Right Hand side ('80-'85) dipstick
    • For 2-piece rear main seal blocks
    • Rubber gasket w/ steel bushings
    • '75-'85 w/ thick front seal
  • SuperSeal Small Block Chevy Valve Cover Gaskets, Pre 1986
    SuperSeal Small Block Chevy Valve Cover Gaskets, Pre 1986
    x
                

    Small Block Chevy (SBC) valve cover gaskets made with a stainless steel frame sandwiched between durometer-tested neoprene rubber. Eliminates leakage caused by internal pressure fluctuations. Won't tear or collapse.

    Reusuable. Package of two. 

    SuperSeal Illustration (GIF)

     

  • EngineQuest OFA305 Chevy Oil Filter Adapter w/ Bypass
    EngineQuest OFA305 Chevy Oil Filter Adapter w/ Bypass
    x
                

    This is a stock adapter with a bypass built into it. Replacement for stock oil filter adapter. Fits Small Block Chevy, Big Block Chevy, and early model 4.3L V6. Replaces GM part number 3952301. Includes two 5/16"-18 x 1" socket head cap screws.

    Bolts directly to the block without a gasket.

  • Small Block Chevy Timing Cover Gasket Set
    Small Block Chevy Timing Cover Gasket Set
    x
                
    • Front crank seal
    • Timing cover gasket
    • Front pan seals
    • Water pump gaskets
    • Fuel pump & fuel pump plate gasket
  • SuperSeal Small Block Chevy Overhaul Gasket Set, 350 Chevy '67 -'85
    SuperSeal Small Block Chevy Overhaul Gasket Set, 350 Chevy '67 -'85
    x
                SuperSeal standard rebuild gasket sets feature composite head gaskets, intake, water pump, valve cover, front cover and seal, oil pan and rear main seal.
            
  • Fel-Pro Gaskets 1205 S/B Chevy Intake Manifold Gaskets, 1.28x2.09 Inch
    Fel-Pro Gaskets 1205 S/B Chevy Intake Manifold Gaskets, 1.28x2.09 Inch
    x
                Fel-Pro Blue Stripe premium quality intake manifold gaskets for Small Block Chevy (SBC).
            
  • SuperSeal 1957-85 Chevy 283-350 Complete Gasket Set
    SuperSeal 1957-85 Chevy 283-350 Complete Gasket Set
    x
                

    SuperSeal Chevy gaskets are for 2-piece rear main blocks. Oil pan gasket can be used with either RH or LH dipsticks and includes both thin and thick seals. Valve cover gaskets are 5/16" rubberized cork suitable for racing.

    • Suitable for engines up to 600 h.p. 
    • Intake Gasket: 1205 style, 1.28" x 2.09"
  • Speedway Small Block Chevy Valve Cover Gaskets, Extra Thick
    Speedway Small Block Chevy Valve Cover Gaskets, Extra Thick
    x
                

    Our durable small block Chevy cork valve cover gaskets will work on any street or race engine. Features a 5/16" extra thick cork/neoprene blend.

  • SuperSeal Small Block Chevy Oil Pan Gaskets, Thick Seal, Left or Right
    SuperSeal Small Block Chevy Oil Pan Gaskets, Thick Seal, Left or Right
    x
                

    Small Block Chevy oil pan gaskets by SuperSeal. 

    • Left Hand side ('55-'79) or Right Hand side ('80-'85) dipstick
    • For 2-piece rear main seal blocks
  • Fel-Pro Gaskets 1206 S/B Chevy Intake Manifold Gaskets, 1.34x2.21 Inch
    Fel-Pro Gaskets 1206 S/B Chevy Intake Manifold Gaskets, 1.34x2.21 Inch
    x
                Fel-Pro Blue Stripe premium quality intake manifold gaskets for Small Block Chevy (SBC).
            
  • Fel-Pro P1010 S/B Chevy 265-400 Copper Ring Head Gasket 4.166 In. Bore
    Fel-Pro P1010 S/B Chevy 265-400 Copper Ring Head Gasket 4.166 In. Bore
    x
                

    These Fel-Pro gaskets work with both cast iron and aluminum heads. Pre-flattened steel wire ring gaskets have the strength of steel wire sealing with minimum brinelling of aluminum heads. Pre-flattened copper wire ring gaskets will not brinell aluminum heads. They offer superior heat dissipation. Multi-layer steel gaskets offer current leading-edge technology and provide a long-term, leakproof seal called Perma Torque MLS.

    • Gaskets are sold each
    • Pre-flattened copper wire
    • Nominal compression thickness: .039"
    • Compressed volume: 8.9 cc
    • Recommended for '86-'91 Corvette aluminum heads. Max 4.155" bore.
    • 4.166" bore gaskets can be used on 400 race engines with up to 4.155" max bore with minimal chamfer.
    • When using aluminum heads, we recommend gaskets with soft copper wire rings (such as 344-1010). This ensures that the aluminum head is not "scarred" by the combustion seal. Shim style 344-1094 will also work well with aluminum heads.

    Head Gasket Application (JPEG)

    Speedy Tip for Proper Head Gasket Seal (GIF)  

  • Oil Filter Adapter without Bypass
    Oil Filter Adapter without Bypass
    x
                

    Unlike an original OEM piece, this non-bypass adapter is designed to force 100% of the engine oil through the filter. It fits 1967 and newer small block and big block Chevys. The adapter includes one gasket and two 5/16-18 x 1" shocket head cap screws.

    • Replacement for stock oil filter to spin-on style oil filters
    • Designed to fit 1967 or newer small block and big block Chevy
    • Aluminum
    • Non-bypass adapter
    • Includes one gasket and two 5/16-18 x 1" shocket head cap screws

    Note: As an alternative, our parts # 720-1029 or 720-1044 are remote filter mounts that will fit modern spin-on filters with 13/16”-16 threads (replacing your old canister-type filter).

  • Speedway 1960-86 Small Block Chevy Valve Cover Gaskets
    Speedway 1960-86 Small Block Chevy Valve Cover Gaskets
    x
                

    Our durable small block Chevy cork valve cover gaskets will work on any street or race engine. Gaskets fit '60-'86 "straight" bolt heads.

  • Fel-Pro Gaskets KS2600 1967-1985 Chevy 350 Overhaul Gasket Set
    Fel-Pro Gaskets KS2600 1967-1985 Chevy 350 Overhaul Gasket Set
    x
                

    The Fel Pro Overhaul Gasket Set includes the composite head gasket, valve cover, water pump, intake, front seal and cover gasket, oil pan and rear main seal.

    Note:  Set contains oil pan gaskets for drivers side dipstick only.

  • Fel-Pro Gaskets FS7548B 1939-1948 Flathead V8 Overhaul Gasket Set
    Fel-Pro Gaskets FS7548B 1939-1948 Flathead V8 Overhaul Gasket Set
    x
                

    You can't overhaul your Flathead without new gaskets. This overhaul gasket set is for 1939-48 Ford and Mercury V8 and comes complete with all the necessary gaskets and seals you need for a typical engine rebuild.

    Includes modern composition head gaskets. The head gaskets will fit bores up to 3-3/16".

    Kit includes the following gaskets:

    • Cylinder Heads
    • Oil Pan
    • Rear Seal
    • Water Pump
    • Front Packing
    • Fuel Pump
    • Water Neck
    • Timing Cover
    • Valve Seals
    • Intake and Exhaust Gaskets

     

  • SuperSeal Small Block Chevy Intake Gasket Set, 1205 Style, Standard
    SuperSeal Small Block Chevy Intake Gasket Set, 1205 Style, Standard
    x
                

    SuperSeal high-performance intake manifold gaskets for 265-400 SB Chevy V8 engines.

    • No end seals - use silicone gasket maker
    • Heat crossover port is blocked
    • Compare to Fel-Pro
  • Fel-Pro 1094 S/B Chevy 265-350 Head Gasket, Embossed Ring, 4.100 Bore
    Fel-Pro 1094 S/B Chevy 265-350 Head Gasket, Embossed Ring, 4.100 Bore
    x
                

    These Fel-Pro gaskets work with both cast iron and aluminum heads. Pre-flattened steel wire ring gaskets have the strength of steel wire sealing with minimum brinelling of aluminum heads. Pre-flattened copper wire ring gaskets will not brinell aluminum heads. They offer superior heat dissipation. Multi-layer steel gaskets offer current leading-edge technology and provide a long-term, leakproof seal called Perma Torque MLS.

    • Gaskets are sold each
    • Embossed shim
    • 4.100" gasket bore
    • Nominal compression thickness: .015"
    • Compressed volume: 3.2 cc
    • Not for use with small block 400. Extra thin to increase compression.
    • When using aluminum heads, we recommend gaskets with soft copper wire rings (such as 344-1010). This ensures that the aluminum head is not "scarred" by the combustion seal. Shim style 344-1094 will also work well with aluminum heads.

    Head Gasket Application (JPEG)

    Speedy Tip for Proper Head Gasket Seal (GIF)  

  • SuperSeal Small Block Chevy Oil Pan Gaskets, 1969-1979 Blocks, One-Piece
    SuperSeal Small Block Chevy Oil Pan Gaskets, 1969-1979 Blocks, One-Piece
    x
                

    Small Block Chevy oil pan gasket by SuperSeal. 

    • Left Hand side ('55-'79) dipstick
    • For 2-piece rear main seal blocks
  • SuperSeal Small Block Chevy R.A.C.E. Gaskets
    SuperSeal Small Block Chevy R.A.C.E. Gaskets
    x
                

    Engine assembly completion sets by Super Seal. R.A.C.E. stands for "remainder to assemble a complete engine." Available for S/B Chevy.

  • Ford 1949-1953 Flathead Copper Big Bore Gasket Set
    Ford 1949-1953 Flathead Copper Big Bore Gasket Set
    x
                For 1949-1953 Fords big bore gasket set. Includes Big Bore head  gaskets. Trimable intake gasket, 1-piece timing cover seal, timing cover  gasket, oil pan gasket, rear main seal, copper exhaust gaskets, water  pump gaskets and oil pump gaskets. For up to 3-3/8" bore. 
  • Offenhauser 1932-48 Flathead Intake Gasket
    Offenhauser 1932-48 Flathead Intake Gasket
    x
                For all 1932-1948 Ford/Mercury Flatheads. Easy to trim for matching block ports and intake.
            
  • SuperSeal Small Block Chevy Oil Pan Gasket, 1986-Up One-Piece
    SuperSeal Small Block Chevy Oil Pan Gasket, 1986-Up One-Piece
    x
                

    Small Block Chevy oil pan gasket by SuperSeal. 

    • 1986-Up one-piece
    • Approx 1/8" thick
    • Gray gasket w/ torque limiting washers
  • 1949-53 Flathead Graphite Big Bore Engine Gasket Set
    1949-53 Flathead Graphite Big Bore Engine Gasket Set
    x
                1949-1953 Ford and Mercury big bore gasket set. Includes big bore head gaskets. Trimable intake gasket, 1-piece timing cover seal, timing cover gasket, oil pan gasket, rear main seal, copper exhaust gaskets, water pump gaskets and oil pump gaskets. For up to 3-3/8" bore.
            
  • SuperSeal Small Block Ford Valve Cover Gaskets
    SuperSeal Small Block Ford Valve Cover Gaskets
    x
                

    Small Block Ford (SBF) valve cover gasket made with stainless steel frame sandwiched between durometer-tested neoprene rubber. Eliminates leakage caused by internal pressure fluctuations. Won't tear or collapse.

    Reusuable. Package of two. 

    SuperSeal Illustration (GIF)

Goto Previous PagePrevious Page
1 2 3 4 5