Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Oval Track Air & Fuel Delivery At Speedway Motors

Speedway Motors stocks all the best names in circle track racing carburetors and intake manifolds! Plus, we have a great selection of fuel cells, as well as electric and mechanical fuel pumps. Don't forget to let your engine breath with filters from K&N, R2C and aFe Power. Whether you run alcohol or gas, Speedway can fuel your need for speed!

"Oval Track, Fuel Pumps and Accessories" Page 1 of 3

  • JAZ Fuel Cell Fuel Level Sending Unit, 0-90 Ohm, 8 Inch
    JAZ Fuel Cell Fuel Level Sending Unit, 0-90 Ohm, 8 Inch
    SKU-458890
    x
                

    These bolt-in fuel level sending units from JAZ Products feature a positive seal and a 2.3" O.D. bung. For GM gauges with 0-90 ohm range.

    Learn more about selecting the proper fuel sending unit by reading our tech article, Fuel Sending Units

  • Rons Racing Product 4001-100 Gold Belt Drive Fuel Pump Kit-Block Mount
    Rons Racing Product 4001-100 Gold Belt Drive Fuel Pump Kit-Block Mount
    SKU-91011585
    x
                Specially designed for IMCA Modified type motors. Only 3 1/4" diameter and works with gas or alcohol. 100 gph. Includes AN 10 inlet and AN 8 outlet. Includes pump, pulleys, mount bracket, drive mandrel and Gilmer drive belt. Mounts to Small Block Chevy block. Block pump mount.
            
  • Carter M60565 2.3 Ford Gas Fuel Pump
    Carter M60565 2.3 Ford Gas Fuel Pump
    SKU-26060565
    x
                

    This high volume fuel pump for the 2.3L Ford 4 cylinder engine has all the desireable features you would want in a racing mechanical fuel pump. Delivers 4-1/2 to 6-1/2 psi with a 40 gph flow rating. Compatible with GASOLINE only. Has ¼ npt ports for both inlet and outlet.

    • Heavy-duty diaphragm
    • High-speed “anti-float” springs
    • Large “full-flow” valves
    • Lightweight, all-aluminum castings
    • Tough, heat-treated lever
  • Holley 12-327-13 Small Block Chevy Racing Mechanical Fuel Pump-130 GPH
    Holley 12-327-13 Small Block Chevy Racing Mechanical Fuel Pump-130 GPH
    SKU-425123272
    x
                

    If you are looking for a high flow fuel pump you can depend on night after night, this is it! Holley's high output, heavy duty mechanical fuel pumps are constructed of rugged materials and feature fuel body castings that can be rotated to accommodate various plumbing situations. 3/8" NPT inlet and outlet.

    For use with gasoline only. NOT for use with alcohol.

    • High output fuel flow
    • Heavy duty construction for continuous high RPM performance
    • Six high flow valves ensure adequate and continuous fuel flow
    • Extra beefy steel rocker arm to help withstand severe race usage
    • Inlet & outlet tapped for 3/8" NPT

    Holley Pump Tech Info (PDF)

  • Waterman 200040S Micro-Bertha Steel Sprint Fuel Pump, .400
    Waterman 200040S Micro-Bertha Steel Sprint Fuel Pump, .400
    SKU-91011554
    x
                Waterman's latest design Ultralight 2000 Sprint fuel pump incorporates a non-corrosive gear housing to maintain critical tolerances and control heat transfer.  Pump includes a -12 AN inlet and is ready for a three or four way manifold with -6 AN outlets.
            
  • Hilborn Fuel Injection PG150C 1/2 Fuel Pump, 2.2 GPM
    Hilborn Fuel Injection PG150C 1/2 Fuel Pump, 2.2 GPM
    SKU-385PG150C05
    x
                

    The Hilborn direct drive fuel pump has a new billet style rotatable mount. Direct drive and flow-tested. Gives long-lasting, rugged dependability. Convenient quick disconnect. For use with injection or alky carbs. Features hard annodized, aluminum construction. The clamp base model offers you the convenience of a quick disconnect. This pump can be rotated for easy access to fittings.

    All pumps rated at 1800rpm with 50psi. Has one -10 AN inlet and two -6 AN outlets.

  • Waterman 350812 Fuel Pump Adapter Fitting, -8 AN Port to -12 AN
    Waterman 350812 Fuel Pump Adapter Fitting, -8 AN Port to -12 AN
    SKU-94011850
    x
                Fittings  are an integral part of any  racing fuel system. Simplicity within a  fuel system is the idea behind  WRC's "Sure Seal" fittings. These  fittings are reverse flared  for maximum fuel flow and the hose end is  O-ringed for a "Sure Seal!" Eliminate the chance for leakage with the  use of these aluminum fittings.
            
  • Full Flow 90 Degree Socketless Reusable Fittings
    Full Flow 90 Degree Socketless Reusable Fittings
    SKU-106500454
    x
                

    Full flow 90° elbow, AN male/female, steel.

    Socketless Fitting Application Chart (GIF)

    AN Thread Size Guide (GIF)

    Fitting Thread Size Guide (GIF)

  • Fuel Filter Mounting Bracket
    Fuel Filter Mounting Bracket
    SKU-910117
    x
                

    These fuel filter mounting brackets are CNC machined aluminum. Available in 1-3/8", 1-1/2", or 1-3/4" round tubing.

    These brackets are designed to be used with our filters. Hole is 2" inner diameter. 

  • Carter M4891 Small Block Chevy 120 GPH Mechanical Fuel Pump
    Carter M4891 Small Block Chevy 120 GPH Mechanical Fuel Pump
    SKU-2604891
    x
                

    These Super Street Racing mechanical fuel pumps from Carter feature high speed anti-float springs, a heavy duty diaphragm with special springs and rugged lightweight aluminum castings. It also has large, full-flow valves and a tough heat-treated lever.

    • For gasoline only
    • 8 PSI shutoff
    • High speed anti-float springs
    • Heavy duty diaphragm w/ special springs
    • Rugged lightweight aluminum castings
    • Large full-flow valves
    • Tough heat-treated lever arm
    • Has 1/4" NPT inlet & outlet
  • Speedway Dash Mount Fuel Shut-off
    Speedway Dash Mount Fuel Shut-off
    SKU-91611504
    x
                

    Features 3/8" NPT female inlet, AN 6 bulkhead, and Teflon® lined valve. On/off lever turns CCW from closed position to fully open position without interference at bulkhead mounting point.

    Fuel Tank Assembly (GIF)

     

  • Chrome B/B Chevy Fuel Pump Blockoff
    Chrome B/B Chevy Fuel Pump Blockoff
    SKU-91011516
    x
                

    Chrome plated steel fuel pump block off plate for 396-454 Big Block Chevy V-8. Includes gasket.

  • Chevy Fuel Pump Push Rod for Flat Tappet Cams
    Chevy Fuel Pump Push Rod for Flat Tappet Cams
    SKU-91511986
    x
                

    This tubular steel fuel pump pushrod is for hydraulic and mechanical "cast" type flat tappet camshafts. Both ends of this pushrod are steel tipped for the best wear characteristics.

    Fits both S/B Chevy 262-400 (1955-1995) and B/B Chevy 396-454 (1965-1990).

    • Heat treated tubular steel construction
    • Centerless ground for concentricity
    • Much lighter than solid steel O.E. type pushrods
  • Speedway High Performance Black 140 GPH Electric Fuel Pump
    Speedway High Performance Black 140 GPH Electric Fuel Pump
    SKU-91012815
    x
                

    Speedway fuel pumps are designed for street/strip application. Externally accessible pressure relief valves and repair kits are readily available.

    • Not for use with fuel injection systems
    • Compatible with alcohol or methanol fuels
    • Flows 140 GPH (free flow)
    • Pressure is pre-set at 14 PSI
    • A regulator is required

     

  • Finned Aluminum B/B Chevy Fuel Pump Blockoff
    Finned Aluminum B/B Chevy Fuel Pump Blockoff
    SKU-91011522
    x
                

    Chrome finned aluminum fuel pump block off plate for 396-454 Big Block Chevy. Gasket NOT included.

  • Holley 12-805 Red Electric Fuel Pump Check Valve Rebuild Kit
    Holley 12-805 Red Electric Fuel Pump Check Valve Rebuild Kit
    SKU-42512805
    x
                

    For servicing of Holley Red electric fuel pump check valve and filter screen.

    425-12805 Instructions (PDF)

  • Speedway Small Block Chevy 110 GPH Racing Fuel Pumps
    Speedway Small Block Chevy 110 GPH Racing Fuel Pumps
    SKU-5791002
    x
                Why pay more when our 6-Valve Racing Pumps will get the job done? These 110 GPH fuel pumps are race tested and proven. The inlet and 3/8" NPT outlet are spaced 180° apart, and the pump head can be clocked for more clearance, if needed.  

    Fits Small Block Chevy 283-400 engines.

    • 3/8" NPT
    • Heavy-duty, fiber-reinforced diaphragm
    • Color-coded springs – matched to O.E. specifications
    • Zinc-plated valves for corrosion-resistance
    • Zamak alloy casting for durability and corrosion-resistance
    • Zytel® spring retainer for smoother, quieter operation
    • Heavy-duty rubber seals protect against leaks
    • Heat-treated rocker arms
    • 100% factory tested for assurance of quality
    • Made in the USA
    • 3/8" NPT Outlets
    • 7 PSI Gas ONLY
  • Holley 12-327-11 Small Block Chevy Racing Mechanical Fuel Pump-110 GPH
    Holley 12-327-11 Small Block Chevy Racing Mechanical Fuel Pump-110 GPH
    SKU-42512327
    x
                
    • Competition 110 GPH 
    • High output performance
    • 6-1/2 - 8 PSI
    • Heavy duty construction for continuous high RPM performance
    • Six high flow valves ensure adequate and continuous fuel flow
    • Repair kits are readily available to replace critical components
    • Features an extra beefy rocker arm casting to help withstand severe race usage.
    • 3/8" NPT inlet/outlet
    • Gasoline only
  • Fragola 495020 Pressure Fitting 1/8 Inch Female to AN3 Male - Blue
    Fragola 495020 Pressure Fitting 1/8 Inch Female to AN3 Male - Blue
    SKU-6179520
    x
                Pressure Fitting 1/8 Inch Female to AN3 Male.
  • KSE Racing Products KSC1065-002 Direct Drive TandemX Pump
    KSE Racing Products KSC1065-002 Direct Drive TandemX Pump
    SKU-91032936
    x
                

    The all new KSE TandemX Pump is based upon the design of its popular predecessor and is a highly developed “two-in-one” high performance power steering & fuel pump. This pump has been designed to help simplify the racer’s engine setup and plumbing while providing the utmost in performance and durability. The TandemX Pump utilizes a single shaft drive to operate both the power steering and fuel pumps or reduced mechanical efficiency losses. The TandemX Pump is compact and is designed to fit almost any racing application with a variety of sizes and mounting configurations.

    • Mount on Back of Dry Sump Pump (CCW Rotation)
    • Cam Drive Pump Off Back of Engine
    • 3/8” Male Hex Drive
  • Waterman 250450 Direct Drive Fuel Pump, .450
    Waterman 250450 Direct Drive Fuel Pump, .450
    SKU-91011582-2
    x
                

    Can be used in standard or reverse rotation. Adjustable flange. Flow tested and ready to race. Provides 25-35% more volume than standard pumps.

    Note: Mounting flange included. 

  • Fuel Pump Installation Kit, Walbro GL392
    Fuel Pump Installation Kit, Walbro GL392
    SKU-960929
    x
                You cannot properly install your new fuel pump without the necessary fittings.  This hardware kit is for installation of Walbro GL392 inline racing fuel pump (960-392).
    • Installation of Walbro GL392
    • Kit includes:
      • (2) two brass rings
      • (2) two nuts
      • (2) two star washers
      • (2) two closed-end wire connector/terminals

     

  • AN6 Fuel Shut Off Valve
    $49.99
    Product Rating: 4.20 Stars
    AN6 Fuel Shut Off Valve
    SKU-91611503
    x
                

    Stainless steel ball with Teflon™ packings in machined aluminum housing, fittings and handle.  Straight through installs inline, on and off high flow valve.

     

    Fuel Tank Assembly

     

  • Waterman 250400M Direct Drive Fuel Pump, .400 with Manifold
    Waterman 250400M Direct Drive Fuel Pump, .400 with Manifold
    SKU-91011575
    x
                

    Can be used in standard or reverse rotation. Adjustable flange. Flow tested and ready to race. Provides 25-35% more volume than standard pumps.

    Note: Mounting flange included. 

  • C&S Low Mount Small Block Chevy Pump Bracket Kit
    C&S Low Mount Small Block Chevy Pump Bracket Kit
    SKU-2384002
    x
                
            
  • C&S Specialties Small Block Chevy Alcohol Fuel Pump
    C&S Specialties Small Block Chevy Alcohol Fuel Pump
    SKU-2384230
    x
                

    C&S Specialties has addressed all problem areas of previous 6-valve pumps in designing their rugged Tool Steel mechanical fuel pumps. This exclusive casting design adds material in 7 places to eliminate cracking, breakage, waviness and leakage. Plus, six High Flow pumping valves, combined with internal porting, are proven to deliver twice the fuel flow over other 6-valve alcohol pumps.

    • Unique baked-on coating to resist corrosion
    • Unique stepped diaphragm reduces stress and increases life
    • Two stainless steel springs instead of one increases reliability
    • CNC milled pump arm from tool steel, not stamped steel
    • Pump arm bushing made from tool steel
    • Pump shaft also made of tool steel, not stamped steel
    • 1/2" NPT inlet and outlet
  • Moroso 65750 Lightweight Fuel Pump Pushrod
    Moroso 65750 Lightweight Fuel Pump Pushrod
    SKU-54565750
    x
                

    This lightweight fuel pump push rod helps prevent fuel pump arm float at high RPM and subsequent fuel starvation. Fits both Small Block Chevy (SBC) and Big Block Chevy (BBC).

    • For use in Drag, Oval Track and Street-Performance applications

     

  • Speedway Electric Fuel Pump, Blue
    Speedway Electric Fuel Pump, Blue
    SKU-91012802
    x
                Speedway's Blue electric fuel pump with regulator is a max-pressure performance pump for gas applications only.  The pressure is preset at 14 psi and the free capacity is 110 gph.  It flows 70 gph while maintaining 9 psi.  Regulator 91012803 is supplied.  
            
  • Peterson Fluid Systems 09-0920 Fuel Shut-Off - AN8 to AN8
    Peterson Fluid Systems 09-0920 Fuel Shut-Off - AN8 to AN8
    SKU-91011716
    x
                If you need an inline fuel shut-off, this is as good as you can find. Lighter than others. Anodized aluminum.
            
  • Fuel Safe FP182S Fuel Pick Up, -10 AN
    Fuel Safe FP182S Fuel Pick Up, -10 AN
    SKU-9403010
    x
                Fuel Safe has long been the leader in Sprint car tanks and bladders. For use with alcohol fuel only.
            
  • Aeromotive 16301 30 Amp Fuel Pump Installation Kit
    Aeromotive 16301 30 Amp Fuel Pump Installation Kit
    SKU-91616301
    x
                

    These wiring kits from Aeromotive come with everything you need to properly install your electric fuel pump. 

    Kit includes:

    • 30 amp 12-volt DC relay
    • 30 amp 12-volt DC circuit breaker
    • 25 ft. gauge red wire
    • 3 ft. gauge black wire
    • Misc. ends and connectors
  • Walbro Inline Fuel Pump Installation Kit with Brackets
    Walbro Inline Fuel Pump Installation Kit with Brackets
    SKU-960939
    x
                This fuel pump installation kit is designed to work  with the Walbro GSL392 external in-line fuel pump (P# 960-392).  Includes everything needed to reduce the noise and residual vibration  from the assembly and provide a professional installation.

    This kit includes:
    • Insulated pump body clamps
    • Sound Insulation and vibration sleeve
    • 3/8” hose barb fuel fittings & crush washers
    • GSL392 Wiring eyelets, nuts, and washers
  • Waterman 250400Direct Drive Fuel Pump, .400
    Waterman 250400Direct Drive Fuel Pump, .400
    SKU-91011582
    x
                

    Can be used in standard or reverse rotation. Adjustable flange. Flow tested and ready to race. Provides 25-35% more volume than standard pumps.

    Note: Mounting flange included. 

  • Mr. Gasket 1514 Chrome Fuel Pump Mounting Plate, Small Block Chevy
    Mr. Gasket 1514 Chrome Fuel Pump Mounting Plate, Small Block Chevy
    SKU-5501514
    x
                

    Mr.Gasket announces a fuel pump mounting plate to dress up the fuel pump area of your engine. This chrome plated mounting plate, for the 265-400 cu. in. Chevrolet small block engine, is ideal for mounting a stock OEM pump. The mounting plate is precision cut to cover the stock fuel pump opening and is complete with gasket.

    • Quality chrome finish
    • Fits 265-400 SBC engines
    • Mounts stock OEM pump
    • Includes gasket
  • Chevy Fuel Pump Push Rod for Roller Cams
    Chevy Fuel Pump Push Rod for Roller Cams
    SKU-91511985
    x
                

    These lightweight fuel pump pushrods are specifically for use with 8620 and 9310 steel billet roller and slot hardfaced camshafts. One end of the pushrod has a bronze tip to bear against the fuel pump eccentric on the camshaft, eliminating the wear problems that occur when using a standard fuel pump pushrod (especially in endurance type applications).

    • Fits both S/B Chevy 262-400 (1955-1995) and B/B Chevy 396-454 (1965-1990)
    • Heat treated tubular steel construction
    • Centerless ground for concentricity
    • Much lighter than solid steel O.E. type pushrods

     

     

  • Holley 12-802-1 110 GPH Blue Electric Fuel Pump with Regulator
    Holley 12-802-1 110 GPH Blue Electric Fuel Pump with Regulator
    SKU-42512802
    x
                Please view the product's page for more information
            
  • Universal Electric 4-7 PSI Fuel Pump
    Universal Electric 4-7 PSI Fuel Pump
    SKU-91011520
    x
                

    Inexpensive solid state universal fuel pump for stock engines. Set for 4-7 psi and flows up to 35 gph. 12 volt. 1/8" npt inlet and outlet and includes two barbed hose fittings to connect to 5/16" hose.

    This pump is NOT self priming; it must be mounted below the gas tank to prevent the pump from running dry and over heating.  Failure to do so will cause premature failure of the pump.

    910-11520 Instructions (PDF) 

  • Holley 12-289-11 S/B Ford Racing Pro Mechanical Fuel Pump, 110 GHP
    Holley 12-289-11 S/B Ford Racing Pro Mechanical Fuel Pump, 110 GHP
    SKU-42512289
    x
                 Competition 110 GPH, 6 1/2 -8 PSI.  Gasoline Only.
    Features:
    • High output performance.
    • Heavy Duty construction for continuous high RPM performance.
    • Six high flow valves ensure adequate and continuous fuel flow.
    • Repair kits are readily available to replace critical components.
    • Chevrolet pump features an extra beefy rocker arm casting to help withstand severe race usage.
    • 3/8" NPT Inlet/Outlet
  • Fragola 495022BL 90   Pressure Gauge Fitting 1/8 In Female - -3 AN Male
    Fragola 495022BL 90 Pressure Gauge Fitting 1/8 In Female - -3 AN Male
    SKU-61795221
    x
                This 1/8" female to -3 AN male 90° elbow adapter fitting is useful when plumbing any pressure gauge. Black anodized finish.
            
  • Hilborn Fuel Injection END521B-6 Fuel Shut-Off Valve
    Hilborn Fuel Injection END521B-6 Fuel Shut-Off Valve
    SKU-385F521B6
    x
                      Smallest and lightest on the market, yet flows a full line size.  Mounts direct to Hilborn fuel pump.       
            
Goto Previous PagePrevious Page
1 2 3